[slurm-users] Novice Slurm Upgrade Questions

[Paul Edmon]

It won't figure it out automatically no.  You will need to ensure that 
the spec is installing to the same locale as your vendor installed it if 
they didn't put it in the default location (/opt isn't the default).

-Paul Edmon-

On 12/4/2020 3:39 PM, Jason Simms wrote:
> Dear Ole,
>
> Thanks. I've read through your docs many times. The relevant upgrade 
> section begins with the assumption that you have properly configured 
> RPMs, so all I'm trying to do is ensure I get to that point. As I 
> noted, a vendor installed Slurm initially through a 
> proprietary script, though they did base it off of created RPMs. I've 
> reached out to them to see whether they used a modified slurm.spec 
> file, which I suspect they did, given that Slurm is installed in 
> /opt/slurm (which seems like a modified prefix, if nothing else).
>
> The fundamental question is, if I am performing a yum update, and I 
> don't adjust any settings in the default slurm.spec file, will it 
> upgrade everything properly where they currently "live," or will it 
> install new files in standard locations? It's a question of whether 
> "yum update" is "smart enough" to figure out what was done before and 
> go with that, or whether I must specify all relevant information in 
> the slurm.spec file each time? Based on Paul's reply, it seems we do 
> need an updated slurm.spec file that reflects our environment, each 
> time we upgrade.
>
> Jason
>
> On Fri, Dec 4, 2020 at 3:13 PM Ole Holm Nielsen 
> <Ole.H.Nielsen at fysik.dtu.dk <mailto:Ole.H.Nielsen at fysik.dtu.dk>> wrote:
>
>     Hi Jason,
>
>     Slurm upgrading should be pretty simple, IMHO.  I've been through
>     this
>     multiple times, and my Slurm Wiki has detailed upgrade documentation:
>     https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#upgrading-slurm
>     <https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#upgrading-slurm>
>
>     Building RPMs is described in this page as well:
>     https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#build-slurm-rpms
>     <https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#build-slurm-rpms>
>
>     I hope this helps.
>
>     /Ole
>
>
>     On 04-12-2020 20:36, Jason Simms wrote:
>     > Thank you for being such a helpful resource for All Things Slurm; I
>     > sincerely appreciate the helpful feedback. Right now, we are
>     running
>     > 20.02 and considering upgrading to 20.11 during our next
>     maintenance
>     > window in January. This will be the first time we have upgraded
>     Slurm,
>     > so understandably we are somewhat nervous and have some questions.
>     >
>     > I am able to download the source and build RPMs successfully.
>     What is
>     > unclear to me is whether I have to adjust anything in the
>     slurm.spec
>     > file or use a .rpmmacros file to control certain aspects of the
>     > installation. Since this would be an upgrade, rather than a new
>     install,
>     > do I have to adjust, e.g., the --prefix value, and all other
>     settings
>     > (X11 support, etc.)? Or, will a yum update "correctly" put the
>     files
>     > where they are on my system, using settings from the existing
>     20.02 version?
>     >
>     > We purchased the system from a vendor, and of course they use
>     custom
>     > scripts to build and install Slurm, and those are tailored for an
>     > initial installation, not an upgrade. Their advice to us was, don't
>     > upgrade if you don't need to, which seems reasonable, except
>     that many
>     > of you respond to initial requests for help by recommending an
>     upgrade.
>     > And in any case, Slurm doesn't upgrade nicely from more than two
>     major
>     > versions back, so I'm hesitant to go too long without patching.
>     >
>     > I'm terribly sorry for my ignorance of all this. But I really
>     lament how
>     > terrible most resources are about all this. They assume that you
>     have
>     > built the RPMs already, without offering any real guidance as to
>     how to
>     > adjust relevant options, or even whether that is a requirement
>     for an
>     > upgrade vs. a fresh installation.
>     >
>     > Any guidance would be most welcome.
>
>
>
>
>
> -- 
> *Jason L. Simms, Ph.D., M.P.H.*
> Manager of Research and High-Performance Computing
> XSEDE Campus Champion
> Lafayette College
> Information Technology Services
> 710 Sullivan Rd | Easton, PA 18042
> Office: 112 Skillman Library
> p: (610) 330-5632
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.schedmd.com/pipermail/slurm-users/attachments/20201204/e1da28da/attachment.htm>