The trick, I think (and Guillaume can certainly correct me) is that the aim is to allow the user to run as many (up to) 200G mem jobs as they want....so long as they do not consume more than 200G on any single node. So, they could run 10 200G jobs....on 10 different nodes. So the mem limit isn't per user...it's per user per node. I think the qos limit you created below works as an OVERALL limit for the user, but doesn't allow a per-node limiting.
Rob
________________________________ From: Carsten Beyer via slurm-users slurm-users@lists.schedmd.com Sent: Wednesday, September 25, 2024 7:27 AM To: Guillaume COCHARD guillaume.cochard@cc.in2p3.fr Cc: Slurm User Community List slurm-users@lists.schedmd.com Subject: [slurm-users] Re: Max TRES per user and node
Hi Guillaume,
as Rob it already mentioned, this could maybe a way for you (partition just created temporarily online for testing). You could also add your MaxTRES=node=1 for more restrictions. We do something similar with QOS to restrict the number of CPU's for user in certain partitions.
sacctmgr create qos name=maxtrespu200G maxtrespu=mem=200G flags=denyonlimit
scontrol create partition=testtres qos=maxtrespu200g maxtime=08:00:00 nodes=lt[10000-10003] DefMemPerCPU=940 MaxMemPerCPU=940 OverSubscribe=NO
That results in:
4 jobs with 100G each:
--- [root@levantetest ~]# squeue JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 862 testtres hostname xxxxxxx PD 0:00 1 (QOSMaxMemoryPerUser) 861 testtres hostname xxxxxxx PD 0:00 1 (QOSMaxMemoryPerUser) 860 testtres hostname xxxxxxx R 0:15 1 lt10000 859 testtres hostname xxxxxxx R 0:22 1 lt10000
6 jobs with 50G each:
--- [k202068@levantetest ~]$ squeue JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 876 testtres hostname xxxxxxx PD 0:00 1 (QOSMaxMemoryPerUser) 875 testtres hostname xxxxxxx PD 0:00 1 (QOSMaxMemoryPerUser) 874 testtres hostname xxxxxxx R 9:09 1 lt10000 873 testtres hostname xxxxxxx R 9:15 1 lt10000 872 testtres hostname xxxxxxx R 9:22 1 lt10000 871 testtres hostname xxxxxxx R 9:26 1 lt10000
Best Regrads, Carsten
-- Carsten Beyer Abteilung Systeme
Deutsches Klimarechenzentrum GmbH (DKRZ) Bundesstraße 45a * D-20146 Hamburg * Germany
Phone: +49 40 460094-221 Fax: +49 40 460094-270 Email: beyer@dkrz.demailto:beyer@dkrz.de URL: http://www.dkrz.dehttp://www.dkrz.de/
Geschäftsführer: Prof. Dr. Thomas Ludwig Sitz der Gesellschaft: Hamburg Amtsgericht Hamburg HRB 39784
Am 24.09.24 um 16:58 schrieb Guillaume COCHARD via slurm-users:
"So if they submit a 2nd job, that job can start but will have to go onto another node, and will again be restricted to 200G? So they can start as many jobs as there are nodes, and each job will be restricted to using 1 node and 200G of memory?"
Yes that's it. We already have MaxNodes=1 so a job can't be spread on multiple nodes.
To be more precise, the limit should be by user and not by job. To illustrate, let's imagine we have 3 empty nodes and a 200G/user/node limit. If a user submit 10 jobs each requesting 100G of memory, there should be 2 jobs running on each worker and 4 jobs pending.
Guillaume
________________________________ De: "Groner, Rob" rug262@psu.edumailto:rug262@psu.edu À: "Guillaume COCHARD" guillaume.cochard@cc.in2p3.frmailto:guillaume.cochard@cc.in2p3.fr Cc: slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com Envoyé: Mardi 24 Septembre 2024 16:37:34 Objet: Re: Max TRES per user and node
Ah, sorry, I didn't catch that from your first post (though you did say it).
So, you are trying to limit the user to no more than 200G of memory on a single node? So if they submit a 2nd job, that job can start but will have to go onto another node, and will again be restricted to 200G? So they can start as many jobs as there are nodes, and each job will be restricted to using 1 node and 200G of memory? Or can they submit a job asking for 4 nodes, where they are limited to 200G on each node? Or are they limited to a single node, no matter how many jobs?
Rob
________________________________ From: Guillaume COCHARD guillaume.cochard@cc.in2p3.frmailto:guillaume.cochard@cc.in2p3.fr Sent: Tuesday, September 24, 2024 10:09 AM To: Groner, Rob rug262@psu.edumailto:rug262@psu.edu Cc: slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com Subject: Re: Max TRES per user and node
Thank you for your answer.
To test it I tried: sacctmgr update qos normal set maxtresperuser=cpu=2 # Then in slurm.conf PartitionName=test […] qos=normal
But then if I submit several 1-cpu jobs only two start and the others stay pending, even though I have several nodes available. So it seems that MaxTRESPerUser is a QoS-wide limit, and doesn't limit TRES per user and per node but rather per user and QoS (or rather partition since I applied the QoS on the partition). Did I miss something?
Thanks again, Guillaume
________________________________ De: "Groner, Rob" rug262@psu.edumailto:rug262@psu.edu À: slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com, "Guillaume COCHARD" guillaume.cochard@cc.in2p3.frmailto:guillaume.cochard@cc.in2p3.fr Envoyé: Mardi 24 Septembre 2024 15:45:08 Objet: Re: Max TRES per user and node
You have the right idea.
On that same page, you'll find MaxTRESPerUser, as a QOS parameter.
You can create a QOS with the restrictions you'd like, and then in the partition definition, you give it that QOS. The QOS will then apply its restrictions to any jobs that use that partition.
Rob ________________________________ From: Guillaume COCHARD via slurm-users slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com Sent: Tuesday, September 24, 2024 9:30 AM To: slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com Subject: [slurm-users] Max TRES per user and node
Hello,
We are looking for a method to limit the TRES used by each user on a per-node basis. For example, we would like to limit the total memory allocation of jobs from a user to 200G per node.
There is MaxTRESperNode (https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.sche...https://slurm.schedmd.com/sacctmgr.html#OPT_MaxTRESPerNode), but unfortunately, this is a per-job limit, not per user.
Ideally, we would like to apply this limit on partitions and/or QoS. Does anyone know if this is possible and how to achieve it?
Thank you,
-- slurm-users mailing list -- slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-leave@lists.schedmd.commailto:slurm-users-leave@lists.schedmd.com