August 2024 - slurm-users - lists.schedmd.com

Slurmctld process error 'double free or corruption' on RHEL 9 (Rocky Linux)
by William VINCENT 07 Oct '24

07 Oct '24

Hello I am writing to report an issue with the Slurmctld process on our RHEL 9 (Rocky Linux) . Twice in the past 5 days, the Slurmctld process has encountered an error that resulted in the service stopping. The error message displayed was "double free or corruption (out)". This error has caused significant disruption to our jobs, and we are concerned about its recurrence. We have tried troubleshooting the issue, but we have not been able to identify the root cause of the problem. We would appreciate any assistance or guidance you can provide to help us resolve this issue. Please let us know if you need any additional information or if there are any specific steps we should take to diagnose the problem further. Thank you for your attention to this matter. Best regards, _________________________ Jul 09 22:12:01 admin slurmctld[711010]: double free or corruption (fasttop) Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Consumed 11min 26.451s CPU time. ..... Jul 14 10:15:01 admin slurmctld[1633720]: double free or corruption (out) Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Consumed 7min 27.596s CPU time. _________________________ slurmctld -V slurm 22.05.9 ________________________ cat /etc/slurm/slurm.conf |grep -v '#' ClusterName=xxx SlurmctldHost=admin SlurmctldParameters=enable_configless SlurmUser=slurm AuthType=auth/munge CryptoType=crypto/munge SlurmctldPort=6817 StateSaveLocation=/var/spool/slurmctld SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmctldDebug=verbose DebugFlags=NO_CONF_HASH SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmdLogFile=/var/log/slurm/slurmd.log SlurmdDebug=verbose SchedulerType=sched/backfill SelectType=select/cons_tres SelectTypeParameters=CR_Core,CR_LLN DefMemPerCPU=1024 MaxMemPerCPU=4096 GresTypes=gpu ProctrackType=proctrack/cgroup JobAcctGatherType=jobacct_gather/cgroup JobAcctGatherFrequency=15 JobCompType=jobcomp/none TaskPlugin=task/cgroup LaunchParameters=use_interactive_step AccountingStorageType=accounting_storage/slurmdbd AccountingStorageHost=admin AccountingStoragePort=6819 AccountingStorageEnforce=associations AccountingStorageTRES=gres/gpu MailProg=/usr/bin/mailx EnforcePartLimits=YES MaxArraySize=200000 MaxJobCount=500000 MpiDefault=none ReturnToService=2 SwitchType=switch/none TmpFS=/tmpslurm/ UsePAM=1 InactiveLimit=0 KillWait=30 MessageTimeout=30 MinJobAge=300 SlurmctldTimeout=120 SlurmdTimeout=300 Waittime=0 PriorityType=priority/multifactor PriorityFlags=FAIR_TREE,MAX_TRES PriorityDecayHalfLife=1-0 PriorityWeightFairshare=10000 NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=2 Sockets=2 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=r9nc-24-[1-12] NodeHostname=r9nc-24-[1-12] Sockets=2 CoresPerSocket=12 ThreadsPerCore=1 CPUs=24 RealMemory=180000 State=UNKNOWN NodeName=r9nc-48-[1-4] NodeHostname=r9nc-48-[1-4] Sockets=2 CoresPerSocket=24 ThreadsPerCore=1 CPUs=48 RealMemory=480000 State=UNKNOWN NodeName=r9ng-1080-[1-7] NodeHostname=r9ng-1080-[1-7] Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=180000 State=UNKNOWN Gres=gpu:1080ti:4 NodeName=r9ng-1080-8 NodeHostname=r9ng-1080-8 Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=176687 State=UNKNOWN Gres=gpu:1080ti:1 PartitionName=24CPUNodes Nodes=r9nc-24-[1-12] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=7500 DefMemPerCPU=7500 TRESBillingWeights="CPU=1.0,Mem=0.125G" Default=YES PartitionName=48CPUNodes Nodes=r9nc-48-[1-4] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=10000 DefMemPerCPU=8000 TRESBillingWeights="CPU=1.0,Mem=0.125G" PartitionName=GPUNodes Nodes=r9ng-1080-[1-7] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 PartitionName=GPUNodes1080-dev Nodes=r9ng-1080-8 State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 Hidden=Yes _________________________ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST 24CPUNodes* up infinite 12 idle r9nc-24-[1-12] 48CPUNodes up infinite 2 idle r9nc-48-[1-2] GPUNodes up infinite 4 idle r9ng-1080-[4-7] GPUNodes1080-dev up infinite 1 idle r9ng-1080-8 -- William VINCENT Administrateur systèmes et réseaux

4 15

Job Step State
by Emyr James 01 Oct '24

01 Oct '24

Dear all, I am working on a script to take completed job accounting data from the slurm accounting database and insert the equivalent data into a clickhouse table for fast reporting I can see that all the information is included in the cluster_job_table and cluster_job_step_table which seem to be joined on job_db_inx To get the cpu usage and peak memory usage etc. I can see that I need to parse the tres columns in the job steps. I couldn't find any column called MaxRSS in the database even though the sacct command prints this. I then found some data in tres_table and assume that sacct is using this. Please correct me if I'm wrong and if sacct is getting information from somwhere other than the accounting database? for the state column I get this... select state, count(*) as num from crg_step_table group by state order by num desc limit 10; +-------+--------+ | state | num | +-------+--------+ | 3 | 590635 | | 5 | 28345 | | 4 | 4401 | | 11 | 962 | | 1 | 8 | +-------+--------+ When I use sacct I see statuses seach as COMPLETED, OUT_OF_MEMORY etc. so there must be a mapping somewhere between these state ids and that text. Can someone prvide that mapping or point me to where it's defined in the database or in the code ? Many thanks, Emyr James Head of Scientific IT CRG - Centre for Genomic Regulation

2 2

Can't schedule on cloud node: State=IDLE+CLOUD+POWERED_DOWN+NOT_RESPONDING
by Xaver Stiensmeier 20 Sep '24

20 Sep '24

Dear slurm-user list, I have a cloud node that is powered up and down on demand. Rarely it can happen that slurm's resumeTimeout is reached and the node is therefore powered down. We have set ReturnToService=2 in order to avoid the node being marked down, because the instance behind that node is created on demand and therefore after a failure nothing stops the system to start the node again as it is a different instance. I thought this would be enough, but apparently the node is still marked with "NOT_RESPONDING" which leads to slurm not trying to schedule on it. After a while NOT_RESPONDING is removed, but I would like to move it directly from within my fail script if possible so that the node can return to service immediately and not be blocked by "NOT_RESPONDING". Best regards, Xaver

2 3

Best practices for tracking jobs started across multiple clusters for accounting purposes.
by Di Bernardini, Fabio 02 Sep '24

02 Sep '24

I need to account for jobs composed of multiple jobs launched on multiple federated (and non-federated) clusters, which therefore have different job IDs. What are the best practices to prevent users from bypassing this tracking? NICE SRL, viale Monte Grappa 3/5, 20124 Milano, Italia, Registro delle Imprese di Milano Monza Brianza Lodi REA n. 2096882, Capitale Sociale: 10.329,14 EUR i.v., Cod. Fisc. e P.IVA 01133050052, Societa con Socio Unico

3 4

QOS MaxTRESPU node=X intepretation
by David Magda 30 Aug '24

30 Aug '24

Hello, Have a question on how to interpret a Node=X MaxTRESPU value for a QOS: If (e.g.) X=4, and each node has (say) 64 CPUs or cores: if a particular job needs 32 cores, then would two jobs count as the equivalent of one node (2*32=64)? And if X=4 for the QOS, would that mean that eight of these jobs would be able to run ((4*64)/32=8)? Or does this TRES limit only get activated -N/--nodes is used? Don't see anything obvious: https://slurm.schedmd.com/resource_limits.html https://slurm.schedmd.com/sacctmgr.html https://slurm.schedmd.com/tres.html Thanks for any info. Regards, David

1 0

playing with --nodes=<size_string>
by Matteo Guglielmi 30 Aug '24

30 Aug '24

Hello, I have a cluster with four Intel nodes (node[01-04], Feature=intel) and four Amd nodes (node[05-08], Feature=amd). # job file #SBATCH --ntasks=3 #SBATCH --nodes=2,4 #SBATCH --constraint="[intel|amd]" env | grep SLURM # slurm.conf PartitionName=DEFAULT MinNodes=1 MaxNodes=UNLIMITED # log SLURM_JOB_USER=software SLURM_TASKS_PER_NODE=1(x3) SLURM_JOB_UID=1002 SLURM_TASK_PID=49987 SLURM_LOCALID=0 SLURM_SUBMIT_DIR=/home/software SLURMD_NODENAME=node01 SLURM_JOB_START_TIME=1724932865 SLURM_CLUSTER_NAME=cluster SLURM_JOB_END_TIME=1724933465 SLURM_CPUS_ON_NODE=1 SLURM_JOB_CPUS_PER_NODE=1(x3) SLURM_GTIDS=0 SLURM_JOB_PARTITION=nodes SLURM_JOB_NUM_NODES=3 SLURM_JOBID=26 SLURM_JOB_QOS=lprio SLURM_PROCID=0 SLURM_NTASKS=3 SLURM_TOPOLOGY_ADDR=node01 SLURM_TOPOLOGY_ADDR_PATTERN=node SLURM_MEM_PER_CPU=0 SLURM_NODELIST=node[01-03] SLURM_JOB_ACCOUNT=dalco SLURM_PRIO_PROCESS=0 SLURM_NPROCS=3 SLURM_NNODES=3 SLURM_SUBMIT_HOST=master SLURM_JOB_ID=26 SLURM_NODEID=0 SLURM_CONF=/etc/slurm/slurm.conf SLURM_JOB_NAME=mpijob SLURM_JOB_GID=1002 SLURM_JOB_NODELIST=node[01-03] <<<=== why three nodes? Shouldn't this still be two nodes? Thank you.

2 5

Print Slurm Stats on Login
by Paul Edmon 29 Aug '24

29 Aug '24

We are working to make our users more aware of their usage. One of the ideas we came up with was to having some basic usage stats printed at login (usage over past day, fairshare, job efficiency, etc). Does anyone have any scripts or methods that they use to do this? Before baking my own I was curious what other sites do and if they would be willing to share their scripts and methodology. -Paul Edmon-

10 20

Multiple Counts Question
by Matteo Guglielmi 29 Aug '24

29 Aug '24

Hello, Does anyone know why this is possible in slurm: --constraint="[rack1*2&rack2*4]" and this is not: --constraint="[rack1*2|rack2*4]" ? Thank you.

1 0

REST API - get_user_environment
by jpuerto＠psc.edu 29 Aug '24

29 Aug '24

In previous versions (v0.0.36) of the REST API the job submission endpoint had a field titled "get_user_environment"; however, it doesn't appear to exist in v0.0.40. Is there an equivalent parameter that should be used? What is the suggested approach for mimicking this behavior in v0.0.40? Best regards, Juan

5 13

ResumeAfterTime - Lacking Info
by Sid Young 29 Aug '24

29 Aug '24

G'Day all, Can anyone shed light on the parameter "Resume AfterTime" returned from the command "scontrol show node XXX" Can it be used to automatically resume a "Down"ed node? Sid

1 0

2024

slurm-users August 2024 ----- 2024 ----- October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users August 2024