At this point, I’d probably crank up the logging some and see what it’s saying in slurmctld.log.
-- #BlackLivesMatter ____ || \UTGERS, |---------------------------*O*--------------------------- ||_// the State | Ryan Novosielski - novosirj@rutgers.edu || \ University | Sr. Technologist - 973/972.0922 (2x0922) ~*~ RBHS Campus || \ of NJ | Office of Advanced Research Computing - MSB A555B, Newark `'
On Nov 27, 2024, at 11:38, Kent L. Hanson Kent.Hanson@inl.gov wrote:
Hey Ryan,
I have restarted the slurmctld and slurmd services several times. I hashed the slurm.conf files. They are the same. I ran “sinfo -a” as root with the same result.
Thanks,
Kent
From: Ryan Novosielski novosirj@rutgers.edu Sent: Wednesday, November 27, 2024 9:31 AM To: Kent L. Hanson Kent.Hanson@inl.gov Cc: slurm-users@lists.schedmd.com Subject: Re: [slurm-users] sinfo not listing any partitions
If you’re sure you’ve restarted everything after the config change, are you also sure that you don’t have that stuff hidden from your current user? You can try -a to rule that out. Or run as root.
-- #BlackLivesMatter ____ || \UTGERSfile://utgers/, |---------------------------*O*--------------------------- ||_// the State | Ryan Novosielski - novosirj@rutgers.edumailto:novosirj@rutgers.edu || \ University | Sr. Technologist - 973/972.0922 (2x0922) ~*~ RBHS Campus || \ of NJ | Office of Advanced Research Computing - MSB A555B, Newark `'
On Nov 27, 2024, at 09:56, Kent L. Hanson via slurm-users <slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com> wrote:
I am doing a new install of slurm 24.05.3 I have all the packages built and installed on headnode and compute node with the same munge.key, slurm.conf, and gres.conf file. I was able to run munge and unmunge commands to test munge successfully. Time is synced with chronyd. I can’t seem to find any useful errors in the logs. For some reason when I run sinfo no nodes are listed. I just see the headers for each column. Has anyone seen this or know what a next step of troubleshooting would be? I’m new to this and not sure where to go from here. Thanks for any and all help!
The odd output I am seeing [username@headnode ~] sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST
(Nothing is output showing status of partition or nodes)
Slurm.conf
ClusterName=slurmkvasir SlurmctldHost=kadmin2 MpiDefault=none ProctrackType=proctrack/cgroup PrologFlags=contain ReturnToService=2 SlurmctldPidFile=/var/run/slurm/slurmctld.pid SlurmctldPort=6817 SlurmPidFile=/var/run/slurm/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmUser=slurm StateSaveLocation=/var/spool/slurmctld TaskPlugin=task/cgroup MinJobAge=600 SchedulerType=sched/backfill SelectType=select/cons_tres PriorityType=priority/multifactor AccountingStorageHost=localhost AccountingStoragePass=/var/run/munge/munge.socket.2 AccountingStorageType=accounting_storage/slurmdbd AccountingStorageTRES=gres/gpu,cpu,node JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup SlurmctldDebug=info SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmLogFile=/var/log/slurm/slurmd.log nodeName=k[001-448] PartitionName=default Nodes=k[001-448] Default=YES MaxTime=INFINITE State=up
Slurmctld.log
Error: Configured MailProg is invalid Slurmctld version 24.05.3 started on cluster slurmkvasir Accounting_storage/slurmdbd: clusteracct_storage_p_register_ctld: Regisetering slurmctld at port 8617 Error: read_slurm_conf: default partition not set. Revovered state of 448 nodes Down nodes: k[002-448] Recovered information about 0 jobs Revovered state of 0 reservations Read_slurm_conf: backup_controller not specified Select/cons_tres; select_p_reconfigure: select/cons_tres: reconfigure Running as primary controller
Slurmd.log
Error: Node configuration differs from hardware: CPUS=1:40(hw) Boards=1:1(hw) SocketsPerBoard=1:2(hw) CoresPerSocket=1:20(hw) ThreadsPerCore:1:1(hw) CPU frequency setting not configured for this node Slurmd version 24.05.3started Slurmd started on Wed, 27 Nov 2024 06:51:03 -0700 CPUS=1 Boards=1 Cores=1 Threads=1 Memory=192030 TmpDisk=95201 uptime 166740 CPUSpecList=(null) FeaturesAvail=(null) FeaturesActive=(null) Error: _forward_thread: failed to k019 (10.142.0.119:6818): Connection timed out (Above line repeated 20 or so times for different nodes.)
Thanks,
Kent Hanson
-- slurm-users mailing list -- slurm-users@lists.schedmd.commailto:slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-leave@lists.schedmd.commailto:slurm-users-leave@lists.schedmd.com