- slurm-users - lists.schedmd.com

SlurmDBD errors
by Sajesh Singh 19 Sep '24

19 Sep '24

OS: CentOS 8.5 Slurm: 22.05 Recently upgraded to 22.05. Upgrade was successful, but after a while I started to see the following messages in the slurmdbd.log file: error: We have more time than is possible (9344745+7524000+0)(16868745) > 12362400 for cluster CLUSTERNAME(3434) from 2024-09-18T13:00:00 - 2024-09-18T14:00:00 tres 1 (this may happen if oversubscription of resources is allowed without Gang) We do have partitions with overlapping nodes, but do not have "Suspend,Gang" set as the global PreemptMode mode. It is currently set to requeue. I have also check sacct and there are no runaway jobs listed. Oversubscription is not enabled on any of the queues as well. Do I need to modify my slurm config to address or is this an error condition caused by the upgrade? Thank you, SS

2 2

Change a job from --exclusive to --exclusive=user
by Gerhard Strangar 18 Sep '24

18 Sep '24

Hello, is it possible to change a pending job from --exclusive to --exclusive=user? I tried scontrol update jobid=... oversubscribe=user, but it seems to only accept yes or no. Gerhard

1 0

Feature request: Max Jobs Per Minute
by Ransom, Geoffrey M. 16 Sep '24

16 Sep '24

Hello We have another batch of new users and some more batches of large array jobs with very short runtimes due to errors in the jobs or just by design. Trying to deal with these issues, Setting ArrayTaskThrottle and user education, I had a thought that it would be very nice to have a limit on how many jobs can start in a given minute for users, so if they posted a 200000 array job with 15 second tasks then the scheduler wouldn't launch more than a 100 or 200 per minute and be less likely to bog down, but if they had longer runtimes (1 hour +) it would take a few extra minutes to start using all the resources they are allowed to but not add much overall delay to the whole set of jobs. I thought about adding something to our CLI filter, but usually these jobs are asking for a runtime of 3-4 hours even though they run for <30 seconds so the submit options don't indicate the problem jobs ahead of time. We currently limit our users to %80 of the available resources which is way more than slurm needs to bog down with fast turnover jobs, but we have users who complain that they can't use that other 20% when the cluster is not busy so putting in lower default restrictions is not currently an option. Has this already been discussed and isn't feasible for technical reasons? (Not finding anything like this yet searching the archives) I think slurm used have a feature request severity on their bug submission site. Is there a severity level they prefer to have suggested requests like this? Thanks

2 2

Detailed locations for SLUG'24
by Bjørn-Helge Mevik 10 Sep '24

10 Sep '24

Dear all SLUG attendees! The information about which buildings/addresses the SLUG reception and presentations are to be held is not very visible on the https://slug24.splashthat.com. There is a map there with all locations (https://www.google.com/maps/d/u/0/edit?mid=1bcGaTiW0TNB5noQsjQ3ulctzKuqlGrQ…), but I've gotten questions about it, so: The reception on Wednesday will be held in the top floor of Oslo Science Park (Forskningsparken). Address: Gaustadalléen 21. There will be someone in the reception who can point you in the right direction. The presentations will be held in auditorium 3 in Helga Engs Hus ("Helga Eng's House"). Address: Sem Sælands vei 7. Lunch will be in the canteen in the same building. The closest subway station to both these buildings is Blindern Subway Station (Blindern T-banestasjon). Looking forward to see you there! -- Regards, Bjørn-Helge Mevik, dr. scient, Department for Research Computing, University of Oslo

1 1

Issue with cgroup v2 when IgnoreSystemd=yes
by Honoré Bergeron 09 Sep '24

09 Sep '24

Hi, This is a follow-up from https://groups.google.com/g/slurm-users/c/JI3UkbCtj3U, but as I could not find any progress, I am opening a new thread. When setting IgnoreSystemd=yes in cgroup.conf, I have the error: error: common_file_write_content: unable to open '/sys/fs/cgroup/system.slice/cgroup.subtree_control' for writing: No such file or directory error: Cannot enable cpuset in /sys/fs/cgroup/system.slice/cgroup.subtree_control: No such file or directory error: common_file_write_content: unable to open '/sys/fs/cgroup/system.slice/cgroup.subtree_control' for writing: No such file or directory error: Cannot enable memory in /sys/fs/cgroup/system.slice/cgroup.subtree_control: No such file or directory error: common_file_write_content: unable to open '/sys/fs/cgroup/system.slice/cgroup.subtree_control' for writing: No such file or directory error: Cannot enable cpu in /sys/fs/cgroup/system.slice/cgroup.subtree_control: No such file or directory error: Could not create scope directory /sys/fs/cgroup/system.slice/slurmstepd.scope: No such file or directory error: Couldn't load specified plugin name for cgroup/v2: Plugin init() callback failed error: cannot create cgroup context for cgroup/v2 error: Unable to initialize cgroup plugin error: slurmd initialization failed I wrote a patch that solves this issue: --- cgroup_v2.c.orig 2024-09-02 13:18:21.376312875 +0200 +++ cgroup_v2.c 2024-09-02 13:22:00.516986953 +0200 @@ -43,6 +43,7 @@ #include <sys/inotify.h> #include <poll.h> #include <unistd.h> +#include <libgen.h> #include "slurm/slurm.h" #include "slurm/slurm_errno.h" @@ -743,11 +744,33 @@ return SLURM_SUCCESS; } +static int _mkdir(const char *path, mode_t mode) +{ + int rc; + char *dir, *pdir; + + dir = strdup(path); + if (dir == NULL) { + return ENOMEM; + } + pdir = dirname(dir); + if (strcmp(pdir, path) != 0) { + rc = _mkdir(pdir, mode); + if (rc && (errno != EEXIST)) { + free(dir); + return rc; + } + } + rc = mkdir(path, mode); + free(dir); + return rc; +} + static int _init_new_scope(char *scope_path) { int rc; - rc = mkdir(scope_path, 0755); + rc = _mkdir(scope_path, 0755); if (rc && (errno != EEXIST)) { error("Could not create scope directory %s: %m", scope_path); return SLURM_ERROR; This patch concerns the file src/plugins/cgroup/v2/cgroup_v2.c. Am I missing something ? Cheers, Honoré.

1 0

Configuration for nodes with different TmpFs locations and TmpDisk sizes
by Jake Longo 06 Sep '24

06 Sep '24

Hi, We have a number of machines in our compute cluster that have larger disks available for local data. I would like to add them to the same partition as the rest of the nodes but assign them a larger TmpDisk value which would allow users to request a larger tmp and land on those machines. The main hurdle is that (for reasons beyond my control) the larger local disks are on a special mount point /largertmp whereas the rest of the compute cluster uses the vanilla /tmp. I can't see an obvious way to make this work as the TmpFs value appears to be global only and attempting to set TmpDisk to a value larger than TmpFs for those nodes will put the machine into an invalid state. I couldn't see any similar support tickets or anything in the mail archive but I wouldn't have thought it would be that unusual to do this. Thanks in advance! Jake

2 1

salloc not starting shell despite LaunchParameters=use_interactive_step
by Loris Bennett 06 Sep '24

06 Sep '24

Hi, With $ salloc --version slurm 23.11.10 and $ grep LaunchParameters /etc/slurm/slurm.conf LaunchParameters=use_interactive_step the following $ salloc --partition=interactive --ntasks=1 --time=00:03:00 --mem=1000 --qos=standard salloc: Granted job allocation 18928869 salloc: Nodes c001 are ready for job creates a job $ squeue --me JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 18928779 interacti interact loris R 1:05 1 c001 but causes the terminal to block. From a second terminal I can log into the compute node: $ ssh c001 [13:39:36] loris@c001 (1000) ~ Is that the expected behaviour or should salloc return a shell directly on the compute node (like srun --pty /bin/bash -l used to do)? Cheers, Loris -- Dr. Loris Bennett (Herr/Mr) FUB-IT, Freie Universität Berlin

5 8

Nodelist syntax and semantics
by Jackson, Gary L. 05 Sep '24

05 Sep '24

Is there a description of the “nodelist” syntax and semantics somewhere other than the source code? By “nodelist” I mean expressions like “name[000,099-100]” and how this one, for example, expands to “name000, name099, name100”. -- Gary

2 1

Configuration for nodes with different TmpFs locations and TmpDisk sizes
by Jake Longo 05 Sep '24

05 Sep '24

Hi all, We have a number of machines in our compute cluster that have larger disks available for local data. I would like to add them to the same partition as the rest of the nodes but assign them a larger TmpDisk value which would allow users to request a larger tmp and land on those machines. The main hurdle is that (for reasons beyond my control) the larger local disks are on a special mount point /largertmp whereas the rest of the compute cluster uses the vanilla /tmp. I can't see an obvious way to make this work as the TmpFs value appears to be global only and attempting to set TmpDisk to a value larger than TmpFs for those nodes will put the machine into an invalid state. I couldn't see any similar support tickets or anything in the mail archive but I wouldn't have thought it would be that unusual to do this. Thanks in advance! Jake

2 1

Make a job pending in the plugin
by benjamin.jin＠bos-semi.com 05 Sep '24

05 Sep '24

Hello all, I am tyring to build a custom plugin to force some jobs to be pended. In the official document, `ESLURM*` errors are only valid for `job_submit_lua`. I tried to send `ESLURM_JOB_PENDING`, but it only rejects the job submission. Does anyone know how to pend a job in job_submit plugin? Thanks.

2 1

Bug? sbatch not respecting MaxMemPerNode setting
by Angel de Vicente 05 Sep '24

05 Sep '24

Hello, we found an issue with Slurm 24.05.1 and the MaxMemPerNode setting. Slurm is installed in a single workstation, and thus, the number of nodes is just 1. The relevant sections in slurm.conf read: ,---- | EnforcePartLimits=ALL | PartitionName=short Nodes=..... State=UP Default=YES MaxTime=2-00:00:00 MaxCPUsPerNode=76 MaxMemPerNode=231000 OverSubscribe=FORCE:1 `---- Now, if I submit a job requesting 76 CPUs and each one needing 4000M (for a total of 304000M), Slurm does indeed respect the MaxMemPerNode setting and the job is not submitted in the following cases ("-N 1" is not really necessary, as there is only one node): ,---- | $ sbatch -N 1 -n 1 -c 76 -p short --mem-per-cpu=4000M test.batch | sbatch: error: Batch job submission failed: Memory required by task is not available | | $ sbatch -N 1 -n 76 -c 1 -p short --mem-per-cpu=4000M test.batch | sbatch: error: Batch job submission failed: Memory required by task is not available | | $ sbatch -n 1 -c 76 -p short --mem-per-cpu=4000M test.batch | sbatch: error: Batch job submission failed: Memory required by task is not available `---- But with this submission Slurm is happy: ,---- | $ sbatch -n 76 -c 1 -p short --mem-per-cpu=4000M test.batch | Submitted batch job 133982 `---- and the slurmjobcomp.log file does indeed tell me that the memory went above MaxMemPerNode: ,---- | JobId=133982 UserId=......(10487) GroupId=domain users(2000) Name=test JobState=CANCELLED Partition=short TimeLimit=45 StartTime=2024-09-04T09:11:17 EndTime=2024-09-04T09:11:24 NodeList=...... NodeCnt=1 ProcCnt=76 WorkDir=/tmp/. ReservationName= Tres=cpu=76,mem=304000M,node=1,billing=76 Account=ddgroup QOS=domino WcKey= Cluster=...... SubmitTime=2024-09-04T09:11:17 EligibleTime=2024-09-04T09:11:17 DerivedExitCode=0:0 ExitCode=0:0 `---- What is the best way to report issues like this to the Slurm developers? I thought of adding it to https://support.schedmd.com/ but it is not clear to me if that page is only meant for Slurm users with a Support Contract? Cheers, -- Ángel de Vicente Research Software Engineer (Supercomputing and BigData) Instituto de Astrofísica de Canarias (https://www.iac.es/en)

2 3

Slurm Remote Task Launch
by Bhaskar Chakraborty 04 Sep '24

04 Sep '24

Hello, I have a slurm job which needs to launch multiple tasks across the allocated hosts for the job. My criteria is that most of the tasks need to be launched from within the main task launchedby slurm in the launch compute node. So, if the allocated hosts are h1, h2 & h3 with h1 being the main launcher node then theinitial task, say launchTask, launched in h1 will need to launch RemoteTask1, RemoteTask2 in h2 & h3 at somepoint during execution. Can I use srun from inside launchTask to do so? If yes, what would be the syntax / args?If no, then what alternative I have other than using rsh/ssh which mayn't be available in the cluster. Thanks in advance! Regards,Bhaskar.

1 0

Best practices for tracking jobs started across multiple clusters for accounting purposes.
by Di Bernardini, Fabio 02 Sep '24

02 Sep '24

I need to account for jobs composed of multiple jobs launched on multiple federated (and non-federated) clusters, which therefore have different job IDs. What are the best practices to prevent users from bypassing this tracking? NICE SRL, viale Monte Grappa 3/5, 20124 Milano, Italia, Registro delle Imprese di Milano Monza Brianza Lodi REA n. 2096882, Capitale Sociale: 10.329,14 EUR i.v., Cod. Fisc. e P.IVA 01133050052, Societa con Socio Unico

3 4

QOS MaxTRESPU node=X intepretation
by David Magda 30 Aug '24

30 Aug '24

Hello, Have a question on how to interpret a Node=X MaxTRESPU value for a QOS: If (e.g.) X=4, and each node has (say) 64 CPUs or cores: if a particular job needs 32 cores, then would two jobs count as the equivalent of one node (2*32=64)? And if X=4 for the QOS, would that mean that eight of these jobs would be able to run ((4*64)/32=8)? Or does this TRES limit only get activated -N/--nodes is used? Don't see anything obvious: https://slurm.schedmd.com/resource_limits.html https://slurm.schedmd.com/sacctmgr.html https://slurm.schedmd.com/tres.html Thanks for any info. Regards, David

1 0

playing with --nodes=<size_string>
by Matteo Guglielmi 30 Aug '24

30 Aug '24

Hello, I have a cluster with four Intel nodes (node[01-04], Feature=intel) and four Amd nodes (node[05-08], Feature=amd). # job file #SBATCH --ntasks=3 #SBATCH --nodes=2,4 #SBATCH --constraint="[intel|amd]" env | grep SLURM # slurm.conf PartitionName=DEFAULT MinNodes=1 MaxNodes=UNLIMITED # log SLURM_JOB_USER=software SLURM_TASKS_PER_NODE=1(x3) SLURM_JOB_UID=1002 SLURM_TASK_PID=49987 SLURM_LOCALID=0 SLURM_SUBMIT_DIR=/home/software SLURMD_NODENAME=node01 SLURM_JOB_START_TIME=1724932865 SLURM_CLUSTER_NAME=cluster SLURM_JOB_END_TIME=1724933465 SLURM_CPUS_ON_NODE=1 SLURM_JOB_CPUS_PER_NODE=1(x3) SLURM_GTIDS=0 SLURM_JOB_PARTITION=nodes SLURM_JOB_NUM_NODES=3 SLURM_JOBID=26 SLURM_JOB_QOS=lprio SLURM_PROCID=0 SLURM_NTASKS=3 SLURM_TOPOLOGY_ADDR=node01 SLURM_TOPOLOGY_ADDR_PATTERN=node SLURM_MEM_PER_CPU=0 SLURM_NODELIST=node[01-03] SLURM_JOB_ACCOUNT=dalco SLURM_PRIO_PROCESS=0 SLURM_NPROCS=3 SLURM_NNODES=3 SLURM_SUBMIT_HOST=master SLURM_JOB_ID=26 SLURM_NODEID=0 SLURM_CONF=/etc/slurm/slurm.conf SLURM_JOB_NAME=mpijob SLURM_JOB_GID=1002 SLURM_JOB_NODELIST=node[01-03] <<<=== why three nodes? Shouldn't this still be two nodes? Thank you.

2 5

Print Slurm Stats on Login
by Paul Edmon 29 Aug '24

29 Aug '24

We are working to make our users more aware of their usage. One of the ideas we came up with was to having some basic usage stats printed at login (usage over past day, fairshare, job efficiency, etc). Does anyone have any scripts or methods that they use to do this? Before baking my own I was curious what other sites do and if they would be willing to share their scripts and methodology. -Paul Edmon-

10 20

Multiple Counts Question
by Matteo Guglielmi 29 Aug '24

29 Aug '24

Hello, Does anyone know why this is possible in slurm: --constraint="[rack1*2&rack2*4]" and this is not: --constraint="[rack1*2|rack2*4]" ? Thank you.

1 0

REST API - get_user_environment
by jpuerto＠psc.edu 29 Aug '24

29 Aug '24

In previous versions (v0.0.36) of the REST API the job submission endpoint had a field titled "get_user_environment"; however, it doesn't appear to exist in v0.0.40. Is there an equivalent parameter that should be used? What is the suggested approach for mimicking this behavior in v0.0.40? Best regards, Juan

5 13

ResumeAfterTime - Lacking Info
by Sid Young 28 Aug '24

28 Aug '24

G'Day all, Can anyone shed light on the parameter "Resume AfterTime" returned from the command "scontrol show node XXX" Can it be used to automatically resume a "Down"ed node? Sid

1 0

Invitation for Feedback on the Slurm-Lab Project
by Patrick Pun 28 Aug '24

28 Aug '24

Hi Slurm User Group, I’m excited to share a project I’ve been working on: Slurm-Lab. It’s a containerised, easy-to-deploy environment designed for learning, testing, and experimenting with Slurm. This project has allowed me and some of my friends to explore various Slurm features directly on our laptops, and I hope it can be just as useful to some of you. Highlights: • Quick Deployment: Setting up a Slurm environment is a breeze—just clone the project and pull the image to get started. • User-Friendly Interface: Interact with your sandbox environment seamlessly through JupyterHub in your browser. • Educational Focus: Explore different Slurm features with provided examples and interactive notebooks, perfect for both new and experienced users. Why I Need Your Feedback: As members of the Slurm community, your insights and experience are incredibly valuable. I’m seeking your feedback on how Slurm-Lab can better serve our community. Whether it’s feature suggestions, bug reports, or general comments. Please take a look at the project and share your thoughts. You can contribute by opening issues or submitting merge requests directly on GitLab. GitLab Repo: https://gitlab.com/CSniper/slurm-lab GitHub Mirror: https://github.com/csniper-patrick/slurm-lab Thank you for your time and for helping make Slurm-Lab a valuable resource for the entire community! Cheers, Patrick

1 0

Spread a multistep job across clusters
by Di Bernardini, Fabio 27 Aug '24

27 Aug '24

Hi everyone, for accounting reasons, I need to create only one job across two or more federated clusters with two or more srun steps. I'm trying with hetjobs but it's not clear to me from the documentation (https://slurm.schedmd.com/heterogeneous_jobs.html) if this is possible and how to do it. I'm trying with this script, but the steps are executed on only the first cluster. Can you tell me if there is a mistake in the hetjob or if it has to be done in another way? #!/bin/bash #SBATCH hetjob #SBATCH --clusters=cluster2 srun -v --het-group=0 hostname #SBATCH hetjob #SBATCH --clusters=cluster3 srun -v --het-group=1 hostname NICE SRL, viale Monte Grappa 3/5, 20124 Milano, Italia, Registro delle Imprese di Milano Monza Brianza Lodi REA n. 2096882, Capitale Sociale: 10.329,14 EUR i.v., Cod. Fisc. e P.IVA 01133050052, Societa con Socio Unico

3 2

Slurm versions 24.05.3 and 23.11.10 are now available
by Marshall Garey 27 Aug '24

27 Aug '24

We are pleased to announce the availability of Slurm versions 24.05.3 and 23.11.10. Version 24.05.3 fixes a potential database problem when deleting a qos. This bug only existed in 24.05. Both versions have fixes for jobs potentially being stuck when using cloud nodes when some nodes are powered down, a regression in 23.11.9 and 24.05.2 that caused sattach to crash, and some other minor issues. Slurm can be downloaded from https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.05.3 > ========================== > -- data_parser/v0.0.40 - Added field descriptions > -- slurmrestd - Avoid creating new slurmdbd connection per request to > '* /slurm/slurmctld/*/*' endpoints. > -- Fix compilation issue with switch/hpe_slingshot plugin. > -- Fix gres per task allocation with threads-per-core. > -- data_parser/v0.0.41 - Added field descriptions > -- slurmrestd - Change back generated OpenAPI schema for > `DELETE /slurm/v0.0.40/jobs/` to RequestBody instead of using parameters > for request. slurmrestd will continue accept endpoint requests via > RequestBody or HTTP query. > -- topology/tree - Fix issues with switch distance optimization. > -- Fix potential segfault of secondary slurmctld when falling back to the > primary when running with a JobComp plugin. > -- Enable --json/--yaml=v0.0.39 options on client commands to dump data using > data_parser/v0.0.39 instead or outputting nothing. > -- switch/hpe_slingshot - Fix issue that could result in a 0 length state file. > -- Fix unnecessary message protocol downgrade for unregistered nodes. > -- Fix unnecessarily packing alias addrs when terminating jobs with a mix of > non-cloud/dynamic nodes and powered down cloud/dynamic nodes. > -- accounting_storage/mysql - Fix issue when deleting a qos that could remove > too many commas from the qos and/or delta_qos fields of the assoc table. > -- slurmctld - Fix memory leak when using RestrictedCoresPerGPU. > -- Fix allowing access to reservations without MaxStartDelay set. > -- Fix regression introduced in 24.05.0rc1 breaking srun --send-libs parsing. > -- Fix slurmd vsize memory leak when using job submission/allocation commands > that implicitly or explicitly use --get-user-env. > -- slurmd - Fix node going into invalid state when using CPUSpecList and > setting CPUs to the # of cores on a multithreaded node > -- Fix reboot asap nodes being considered in backfill after a restart. > -- Fix --clusters/-M queries for clusters outside of a federation when > fed_display is configured. > -- Fix scontrol allowing updating job with bad cpus-per-task value. > -- sattach - Fix regression from 24.05.2 security fix leading to crash. > -- mpi/pmix - Fix assertion when built under --enable-debug. > * Changes in Slurm 23.11.10 > =========================== > -- switch/hpe_slingshot - Fix issue that could result in a 0 length state file. > -- Fix unnecessary message protocol downgrade for unregistered nodes. > -- Fix unnecessarily packing alias addrs when terminating jobs with a mix of > non-cloud/dynamic nodes and powered down cloud/dynamic nodes. > -- Fix allowing access to reservations without MaxStartDelay set. > -- Fix scontrol allowing updating job with bad cpus-per-task value. > -- sattach - Fix regression from 23.11.9 security fix leading to crash.

1 0

Slurm management of Lenovo SD665 V3 dual-server trays?
by Ole Holm Nielsen 26 Aug '24

26 Aug '24

We're experimenting with ways to manage our new racks of Lenovo SD665 V3 dual-server trays with Direct Water Cooling (further information is in our Wiki page https://wiki.fysik.dtu.dk/ITwiki/Lenovo_SD665_V3/ ) Management problems arise because 2 servers share a tray with common power and water cooling. This wouldn't be so bad if it weren't for Lenovo's NVIDIA/Mellanox SharedIO Infiniband adapters, where the left-hand node's IB adapter is a client of the right-hand node's adapter. So we can't reboot or power down the right-hand node without killing any MPI jobs that happen to be using the left-hand node. My question is if other Slurm sites owning Lenovo dual-server trays with SharedIO Infiniband adapters have developed some clever ways of handling such node pairs a single entity somehow? Is there anything we should configure on the Slurm side to make such nodes easier to manage? Thanks for sharing any insights, Ole -- Ole Holm Nielsen PhD, Senior HPC Officer Department of Physics, Technical University of Denmark

2 5

How to select a container runtime system?
by wdennis＠nec-labs.com 23 Aug '24

23 Aug '24

We are getting a few calls to support container workloads on our Slurm cluster; I want to support these user's usecases, so am looking into it now. The problem for me is, I'm not super-familiar with container runtimes excepting (regular rootful) Docker... I see that any Slurm-compatible runtime must be "rootless", so that takes out the integration with regular Docker. How does one choose between the many options (from what I gather, Apptainer/Singularity, Podman, and rootless Docker seem to be the most widely-used.) We also have to support GPUs in these containers, but I assume that any of these can support that. Can anyone tell me what the most popular Slurm-compatible container runtime may be, and plusses/minuses of the three I mentioned above? Thanks!

2 1

Slurmdbd purge and reported downtime
by Davide DelVento 23 Aug '24

23 Aug '24

I am confused by the reported amount of Down and PLND Down by sreport. According to it, our cluster would have had a significant amount of downtime, which I know didn't happen (or, according to the documentation "time that slurmctld was not responding", see https://slurm.schedmd.com/sreport.html) Could it be my purge settings causing this problem? How can I check (maybe in some logs, maybe in the future) if actually slurmctld was not responding? The expected long-term numbers should be less than the ones reported for last month when we had an issue with a few nodes.... Thanks! [davide@login ~]$ grep Purge /opt/slurm/slurmdbd.conf #JobPurge=12 #StepPurge=1 PurgeEventAfter=1month PurgeJobAfter=12month PurgeResvAfter=1month PurgeStepAfter=1month PurgeSuspendAfter=1month [davide@login ~]$ sreport -t percent -T cpu,mem cluster utilization start=2/1/22 -------------------------------------------------------------------------------- Cluster Utilization 2022-02-01T00:00:00 - 2024-08-21T23:59:59 Usage reported in Percentage of Total -------------------------------------------------------------------------------- Cluster TRES Name Allocated Down PLND Down Idle Planned Reported --------- -------------- --------------- --------------- -------------- ---------------- --------- ---------------- cluster cpu 19.50% 12.07% 3.92% 64.36% 0.15% 100.03% cluster mem 16.13% 13.17% 4.56% 66.13% 0.00% 99.99% [davide@login ~]$ sreport -t percent -T cpu,mem cluster utilization start=2/1/23 -------------------------------------------------------------------------------- Cluster Utilization 2023-02-01T00:00:00 - 2024-08-21T23:59:59 Usage reported in Percentage of Total -------------------------------------------------------------------------------- Cluster TRES Name Allocated Down PLND Down Idle Planned Reported --------- -------------- --------------- --------------- -------------- --------------- --------- ---------------- cluster cpu 28.74% 18.80% 6.44% 45.77% 0.24% 100.02% cluster mem 22.52% 20.54% 7.38% 49.55% 0.00% 99.98% [davide@login ~]$ sreport -t percent -T cpu,mem cluster utilization start=2/1/24 -------------------------------------------------------------------------------- Cluster Utilization 2024-02-01T00:00:00 - 2024-08-21T23:59:59 Usage reported in Percentage of Total -------------------------------------------------------------------------------- Cluster TRES Name Allocated Down PLND Down Idle Planned Reported --------- -------------- -------------- --------------- -------------- --------------- -------- --------------- cluster cpu 29.92% 24.88% 17.73% 27.45% 0.02% 100.00% cluster mem 20.07% 28.60% 19.57% 31.76% 0.00% 100.00% [davide@login ~]$ sreport -t percent -T cpu,mem cluster utilization start=8/8/24 -------------------------------------------------------------------------------- Cluster Utilization 2024-08-08T00:00:00 - 2024-08-21T23:59:59 Usage reported in Percentage of Total -------------------------------------------------------------------------------- Cluster TRES Name Allocated Down PLND Dow Idle Planned Reported --------- -------------- ------------- ------------ -------- -------------- -------- -------------- cluster cpu 15.96% 2.53% 0.00% 81.51% 0.00% 100.00% cluster mem 9.18% 2.22% 0.00% 88.60% 0.00% 100.00% [davide@login ~]$ sreport -t percent -T cpu,mem cluster utilization start=7/7/24 -------------------------------------------------------------------------------- Cluster Utilization 2024-07-07T00:00:00 - 2024-08-21T23:59:59 Usage reported in Percentage of Total -------------------------------------------------------------------------------- Cluster TRES Name Allocated Down PLND Dow Idle Planned Reported --------- -------------- -------------- ------------- -------- -------------- -------- -------------- cluster cpu 27.07% 2.57% 0.00% 70.34% 0.02% 100.00% cluster mem 17.35% 2.26% 0.00% 80.40% 0.00% 100.00%

2 2

2025

2024

slurm-users ----- 2025 ----- September 2025 August 2025 July 2025 June 2025 May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users