- slurm-users - lists.schedmd.com

Slurm With Podman - No child processes error
by ARNULD 08 May '24

08 May '24

I have integrated Podman with Slurm as per the docs ( https://slurm.schedmd.com/containers.html#podman-scrun) and when I do a test run: "podman run hello-world" (this runs fine) ---- $ podman run alpine hostname executable file `/usr/bin/hostname` not found in $PATH: No such file or directory srun: error: slurm1: task 0: Exited with exit code 1 ----- $ podman run alpine printenv SLURM_JOB_ID executable file `/usr/bin/printenv` not found in $PATH: No such file or directory srun: error: slurm1: task 0: Exited with exit code 1 scrun: error: run_command_waitpid_timeout: waitpid(67537): No child processes --- podman run alpine uptime 11:31:28 up 5:32, 0 users, load average: 0.00, 0.00, 0.00 scrun: error: run_command_waitpid_timeout: waitpid(68160): No child processes ------ I built a small image from python:alpine3.19 which just prints "hello world" and numbers from 1 to 10. Here is a run: $ podman run -it --rm hello-python $ podman run -it --rm hello-python Hello, world! Numbers from 1 to 10: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] ---- No error with my image. Also I tested podman on another machine without Slurm. Podman with its default runtime prints the hostname fine with "podman run alpine hostname". So something to do with its integration with Slurm. What can I do to diagnose the problem?

1 0

StateSaveLocation and Slurm HA
by Pierre Abele 07 May '24

07 May '24

Hi all, I am looking for a clean way to set up Slurms native high availability feature. I am managing a Slurm cluster with one control node (hosting both slurmctld and slurmdbd), one login node and a few dozen compute nodes. I have a virtual machine that I want to set up as a backup control node. The Slurm documentation says the following about the StateSaveLocation directory: > The directory used should be on a low-latency local disk to prevent file system delays from affecting Slurm performance. If using a backup host, the StateSaveLocation should reside on a file system shared by the two hosts. We do not recommend using NFS to make the directory accessible to both hosts, but do recommend a shared mount that is accessible to the two controllers and allows low-latency reads and writes to the disk. If a controller comes up without access to the state information, queued and running jobs will be cancelled. [1] My question: How do I implement the shared file system for the StateSaveLocation? I do not want to introduce a single point of failure by having a single node that hosts the StateSaveLocation, neither do I want to put that directory on the clusters NFS storage since outages/downtime of the storage system will happen at some point and I do not want that to cause an outage of the Slurm controller. Any help or ideas would be appreciated. Best, Pierre [1] https://slurm.schedmd.com/quickstart_admin.html#Config -- Pierre Abele, M.Sc. HPC Administrator Max-Planck-Institute for Evolutionary Anthropology Department of Primate Behavior and Evolution Deutscher Platz 6 04103 Leipzig Room: U2.80 E-Mail: pierre_abele(a)eva.mpg.de Phone: +49 (0) 341 3550 245

3 2

"token expired" errors with auth/slurm
by Fabio Ranalli 07 May '24

07 May '24

Hi there, We've updated to 23.11.6 and replaced MUNGE with SACK. Performance and stability have both been pretty good, but we're occasionally seeing this in the slurmctld.log /[2024-05-07T03:50:16.638] error: decode_jwt: token expired at 1715053769 [2024-05-07T03:50:16.638] error: cred_p_unpack: decode_jwt() failed [2024-05-07T03:50:16.638] error: Malformed RPC of type REQUEST_BATCH_JOB_LAUNCH(4005) received [2024-05-07T03:50:16.641] error: slurm_receive_msg_and_forward: [[headnode.internal]:58286] failed: Header lengths are longer than data received [2024-05-07T03:50:16.648] error: service_connection: slurm_receive_msg: Header lengths are longer than data received/ it seems to impact a subset of nodes: jobs get killed and no new ones are allocated. Full functionality can be restored by simply restarting slurmctld first, and then slurmd. Is the token expected to actually expire? I didn't see this possibility mentioned in the docs. The problem occurs on an R&D cloud cluster based on EL9, with a pretty "flat" setup. _headnode_: configless slurmctld, slurmdbd, mariadb, nfsd _elastic compute nodes_: autofs, slurmd *//etc/slurm/slurm.conf/* AuthType=auth/slurm AuthInfo=use_client_ids CredType=cred/slurm *//etc/slurm/slurmdbd.conf/* AuthType=auth/slurm AuthInfo=use_client_ids Has anyone else encountered the same error? Thanks, Fabio -- *Fabio Ranalli* | Principal Systems Administrator Schrödinger, Inc. <https://schrodinger.com>

1 0

FreeBSD/aarch64: ld: error: unknown emulation: elf_aarch64
by Nuno Teixeira 06 May '24

06 May '24

Hello, I'm new maintainer of slurm FreeBSD port <https://www.freshports.org/sysutils/slurm-wlm/> and for a long time it failing on aarch64 platform. Any clues? > ld: error: unknown emulation: elf_aarch64 `clang -print-targets`: Registered Targets: aarch64 - AArch64 (little endian) aarch64_32 - AArch64 (little endian ILP32) aarch64_be - AArch64 (big endian) arm - ARM arm64 - ARM64 (little endian) arm64_32 - ARM64 (little endian ILP32) armeb - ARM (big endian) ppc32 - PowerPC 32 ppc32le - PowerPC 32 LE ppc64 - PowerPC 64 ppc64le - PowerPC 64 LE riscv32 - 32-bit RISC-V riscv64 - 64-bit RISC-V thumb - Thumb thumbeb - Thumb (big endian) x86 - 32-bit X86: Pentium-Pro and above x86-64 - 64-bit X86: EM64T and AMD64 Full log: https://pkg-status.freebsd.org/ampere2/data/main-arm64-default/pb78025a96ed… Thanks, -- Nuno Teixeira FreeBSD UNIX: <eduardo(a)FreeBSD.org> Web: https://FreeBSD.org

3 7

Rootless Docker Errors with Slurm
by ARNULD 06 May '24

06 May '24

I am trying to integrate Rootless Docker with Slurm. have set-up Rootless Docker as per the docs "https://slurm.schedmd.com/containers.html" . I have scrum.lua, oci.conf (for crun) and slurm.conf in place. Then "~/.config/docker/daemon.json" and "~/.config/systemd/user/docker.service.d/override.conf" are in place too. But I can't seem to get it to work: $ docker run $DOCKER_SECURITY alpine /bin/printenv SLURM_JOB_ID Unable to find image 'alpine:latest' locally latest: Pulling from library/alpine 4abcf2066143: Pull complete Digest: sha256:c5b1261d6d3e43071626931fc004f70149baeba2c8ec672bd4f27761f8e1ad6b Status: Downloaded newer image for alpine:latest docker: Error response from daemon: failed to create task for container: failed to create shim task: OCI runtime create failed: unable to retrieve OCI runtime error (open /run/user/1000/docker-exec/containerd/daemon/io.containerd.runtime.v2.task/moby/97e8dd767977ac03ab7af54c015c0fd5dfd26e737771b977acb7e41f799023aa/log.json: no such file or directory): /usr/bin/scrun did not terminate successfully: exit status 1: unknown. One thing is if I don't use Slurm as the runtime for Docker (if I remove the " ~/.config/docker/daemon.json") then docker runs fine

1 0

Invalid/incorrect gres.conf syntax
by Gestió Servidors 06 May '24

06 May '24

Hello, I have configured my "gres.conf" in this way: NodeName=node-gpu-1 AutoDetect=off Name=gpu Type=GeForceRTX2070 File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-1 AutoDetect=off Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia1 Cores=12-23 NodeName=node-gpu-2 AutoDetect=off Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-2 AutoDetect=off Name=gpu Type=GeForceGTX1080 File=/dev/nvidia1 Cores=12-23 NodeName=node-gpu-3 AutoDetect=off Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-4 AutoDetect=off Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 Cores=0-7 node-gpu-1 and node-gpu-2 are two systems with two sockets; node-gpu-3 and node-gpu-4 have only one socket. In my "slurm.conf" I have these lines: AccountingStorageTRES=gres/gpu SelectType=select/cons_tres GresTypes=gpu NodeName=node-gpu-1 CPUs=24 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceRTX2070:1,gpu:GeForceGTX1080Ti:1 NodeName=node-gpu-2 CPUs=24 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceGTX1080Ti:1,gpu:GeForceGTX1080:1 NodeName=node-gpu-3 CPUs=12 SocketsPerBoard=1 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=23000 Gres=gpu:GeForceRTX3080:1 NodeName=node-gpu-4 CPUs=8 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2 RealMemory=7800 Gres=gpu:GeForceRTX3080:1 Thanks a lot!

1 0

slurm reservation: how to use more nodes (bigger than NodeCnt) when submitting jobs
by WANG, Hongying 03 May '24

03 May '24

Hi all, I have a question about the reservation. If I create a reservation with 3 nodes (NodeCnt=3), how can I use more than 3 nodes when submitting a job with --reservation=$RES_NAME ? Thanks a lot. Regards, -- WANG, Hongying ClusterTech Limited Advanced I.T. Solutions and Consultancy SINCE 2000 Cloud + High Performance Computing + AI & Analytics + Big Data www.clustertech.com Units 211-213, Lakeside 1, No. 8 Science Park West Avenue, Hong Kong Science Park, N.T. Hong Kong Hong Kong • Beijing • Shanghai • Guangzhou • Shenzhen • Xi'an • Sydney

1 0

scheduling according time requirements
by Dietmar Rieder 30 Apr '24

30 Apr '24

Hi, is it possible to have slurm scheduling jobs automatical according to the "-t" time requirements to a fitting partition? e.g. 3 partitions PartitionName=standard Nodes=c-[01-10] Default=YES MaxTime=04:00:00 DefaultTime=00:10:00 State=UP OverSubscribe=NO PartitionName=medium Nodes=c-[04-08] Default=NO MaxTime=24:00:00 DefaultTime=04:00:00 State=UP OverSubscribe=NO PartitionName=long Nodes=c-[09-10] Default=NO MaxTime=336:00:00 DefaultTime=24:00:00 State=UP OverSubscribe=NO So in the standard partition which is the default we have all nodes and a max time of 4h, in the medium partition we have 4 nodes with a max time of 24h and in the long partition we have 2 nodes with a max time of 336h. I was hoping that if I submit a job with -t 01:00:00 it can be run on any node (standard partition), whereas when specifying -t 05:00:00 or -t 48:00:00 the job will run on the nodes of the medium or long partition respectively. However, my job will not get scheduled at all when -t is greater than 01:00:00 i.e. ]$ srun --cpus-per-task 1 -t 01:00:01 --pty bash srun: Requested partition configuration not available now srun: job 42095 queued and waiting for resources it will wait forever because the standard partition is selected, I was thinking that slurm would automatically switch to the medium partition. Do I misunderstand something there? Or can this be somehow configured. Thanks so much and sorry for the naive question Dietmar

4 10

Trying to Track Down root Usage
by Jason Simms 29 Apr '24

29 Apr '24

Hello all, Each week, I generate an automated report of the top users by CPU hours. This week, for whatever reason the user root accounted for a massive number of hours: -------------------------------------------------------- Login Proper Name Used Account --------------- -------------------- --------- --------- root root 28224 root I've tried to generate a report on what might account for this, but so far I'm stumped. For example, when I run a typical report: sacct -o jobid,jobname,start,end,NNodes,NCPUS,ReqMem,CPUTime,AveRSS,MaxRSS -S 2024-04-22 -E 2024-04-29 --user=root --units=G Nothing comes up (same if I change --user=root to --account=root). I'd appreciate any thoughts as to how to investigate or understand this. It may well be that I'm missing something fundamental. Warmest regards, Jason -- *Jason L. Simms, Ph.D., M.P.H.* Manager of Research Computing Swarthmore College Information Technology Services (610) 328-8102 Schedule a meeting: https://calendly.com/jlsimms

2 2

HPC Principal System Engineer at the Broad
by Paul Edmon 25 Apr '24

25 Apr '24

A friend ask me to pass this along. Figured some folks on this list might be interested. https://broadinstitute.avature.net/en_US/careers/JobDetail/HPC-Principal-Sy… -Paul Edmon-

1 0