- slurm-users - lists.schedmd.com

knl_generic.conf seems to be ignored and Slurm adopts default settings which specify Intel motherboard and syscfg - need help to figure out why Slurm is not reading my Dell knl_generic.conf parameters
by Bryan Johnston 01 May '25

01 May '25

Hi folks I'm in the process of standing up some Stampede2 Dell C3620p KNL nodes and I seem to be hitting a blind spot. I previously "successfully" configured KNL's on an Intel board (S7200AP), with OpenHPC and Rocky8. I say "successfully" because it works but evidently my latest troubleshooting has revealed that I may have been lucky rather than an expert KNL integrator :-) I thought I knew what I was doing, but after repeating my Intel KNL recipe with the Dell system, I have unearthed my ignorance with this wonderful (but deprecated) technology (anecdotally, the KNLs offer excellent performance and power efficiency for our workloads, particularly when contrasted with our alternative available hardware). The first discovery was the "syscfg" for Intel boards is not the same as the "syscfg" for Dell boards. I've since sorted this out. The second discovery was made while troubleshooting an issue that I'm hitting. After realising that the slurmd client nodes don't seem to be reading the "knl_generic.conf" parameters that are specified in /etc/slurm on the smshost (OpenHPC parlance for head node ... And it's a Slurm config less set up), I think my original Intel solution was working out of luck more than ingenuity. For reference , the Slurm configuration for KNL now includes: ``` NodeFeaturesPlugins=knl_generic DebugFlags=NodeFeatures GresTypes=hbm ``` And I've created a separate "knl_generic.conf" that points to the Dell specific tools and features. For the Dell system, slurmd seems to ignore my knl_generic.conf file and is drawing defaults from somewhere else. Slurm still considers SystemType to be Intel, SyscfgPath to be the default location, and SyscfgTimeout to be 1000. For Dell systems, Slurm needs to have SystemType=Dell and Timeout to be 1000. I don't understand why the nodes are not reading the knl_generic file - any help or clues would be appreciated. Here's my theory on what is happening: The Intel KNL system was successful by luck ... It probably exhibited the same ignore-the-config-file but ran default NodeFeatures for some generic knl_generic settings which are stored somewhere as default parameters. I must have just lucked out when I was using my Intel KNL system because it was using the defaults (that are compatible with Intel). If this assumption is correct, the Dell system is not working because it isn't compatible with the Intel defaults. Any clues on how to successfully invoke the config file (or better debuggingtechniwues to figure out why it isn't) would be appreciated. I can share journalctl feedback if necessary. For now, I've tried changing ownership of the config files to root:slurm, copied knl_generic.conf to the compute nodes' /etc/slurm/ and also tried to specify the config file by running (on the compute nodes) "slurmd" with "-f" ... No joy; if slurmd runs successfully (when I don't screw up some random experimental settings) then it always seems to ignore knl_generic.conf and loads some default settings from somewhere. A few questions: 1. Are there default settings stored somewhere? I might be barking up the wrong tree, although I've looked for files that may clash with the config file I've created but can't find any. 2. Is there a better way to force the knl_generic file to be loaded? 3. Is the configless Slurm somehow not reading the knl_generic file to the clients? I understand that all configuration files are read from the host server. Many thanks for any help! Regards / Groete / Sala(ni) Kahle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bryan Johnston Senior HPC Technologist II Lead: HPC Ecosystems Project HPCwire 2024's Outstanding Leader in HPC CHPC | www.chpc.ac.za | NICIS | nicis.ac.za Centre for High Performance Computing If you receive an email from me out of office hours for you, please do not feel obliged to respond during off-hours! Book time to meet with me<https://outlook.office.com/bookwithme/user/87af4906a703488386578f34e4473c74…>

1 1

Slurm and Kerberos/GSSAPI
by Burian, John 01 May '25

01 May '25

Does anyone have any experience with using Kerberos/GSSAPI and Slurm? I’m specifically wondering if there is a known mechanism for providing proper Kerberos credentials to Slurm batch jobs, such that those processes would be able to access a filesystem that requires Kerberos credentials. Some quick searching returned nothing useful. Interactive jobs have a similar problem, but I’m hoping that SSH credential forwarding can be leveraged there. I’m nothing like an expert in Kerberos, so forgive any apparent ignorance. Thanks, John

2 3

Can't specify multiple partitions when submitting GPU jobs
by milad＠earthspecies.org 29 Apr '25

29 Apr '25

Hi, I have defined a partition for each GPU type we have in the cluster. This was mainly because I have different Node types for each GPU type and I want to set `DefCpuPerGPU` `DefMemPerGPU` for each of them. Unfortunately one can't set them per node but can do that per partition. Now sometimes people don't care about the GPU type and would like any of the partitions to pick up the job. The `--partition` in `sbatch` does allow specifying multiple partitions and this works fine when I'm not specifying `--gpu`. However when I add do something like `sbatch -p A,B --gpus 1 script.sh` then I get "srun: job 6279 queued and waiting for resources" even though partition B does have a GPU to offer. Strangely if the first partition specified (i.e. A) had a free GPU it would allocate the GPU and run the job. Is this a bug? Perhaps related to this: https://groups.google.com/g/slurm-users/c/UOUVfkajUBQ

3 4

Re: Error "_check_core_range_matches_sock" when
by Gestió Servidors 29 Apr '25

29 Apr '25

Hello, Yes, I know system is single-socket, but in a similar computer, this configuration works fine... After some tests, I have realized that with SLURM 23.11.0 I can assign CPUs in "gres.conf" (and, then, use half CPU for one GPU and other half for other GPU), but with SLURM 24.11.4 I receive " _check_core_range_matches_sock". I have read "NEWS" file inside sources files in 24.11.4 tgz and it says: […] * Changes in Slurm 23.11.7 ========================== […] -- Fix issue that only left one thread on each core available when "CPUs=" is configured to total thread count on multi-threaded hardware and no other topology info ("Sockets=", "CoresPerSocket", etc.) is configured. […] So, I suppose, in version 23.11.7 SLURM corrected that behaviour. Could someone confirm that? Thanks.

1 0

Error "_check_core_range_matches_sock" when starting "slurmctld"
by Gestió Servidors 28 Apr '25

28 Apr '25

Hello, I have compiled SLURM-24.11.3 and I have configured two GPUs in my system (slurmctld and slurmd are running in the same computer). Computes has a old processor Intel i7 with 4 cores and 4 hyperthreading. Node is configured with "NodeName=mysystem CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2 RealMemory=7940 Gres=gpu:geforce_gtx_titan_x:1,gpu:geforce_gtx_titan_black:1". "lscpu" command returns: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 26 Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz BIOS Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz File gres.conf is: NodeName=mysystem Autodetect=off Name=gpu Type=geforce_gtx_titan_x File=/dev/nvidia0 CPUs=0-1 NodeName=mysystem Autodetect=off Name=gpu Type=geforce_gtx_titan_black File=/dev/nvidia1 CPUs=2-3 However, when I start daemon "slurmctld", system returns this error: [2025-04-28T09:35:41.003] error: _check_core_range_matches_sock: gres/gpu GRES core specification 0-1 for node aopcvis5 doesn't match socket boundaries. (Socket 0 is cores 0-3) [2025-04-28T09:35:41.003] error: Setting node aopcvis5 state to INVAL with reason:gres/gpu GRES core specification 0-1 for node aopcvis5 doesn't match socket boundaries. (Socket 0 is cores 0-3) Where is my configuration error? Thanks.

2 1

How can we put limits on interactive jobs?
by Ole Holm Nielsen 25 Apr '25

25 Apr '25

We would like to put limits on interactive jobs (started by salloc) so that users don't leave unused interactive jobs behind on the cluster by mistake. I can't offhand find any configurations that limit interactive jobs, such as enforcing a timelimit. Perhaps this could be done in job_submit.lua, but I couldn't find any job_desc parameters in the source code which would indicate if a job is interactive or not. Question: How do people limit interactive jobs, or identify orphaned jobs and kill them? Thanks a lot, Ole -- Ole Holm Nielsen PhD, Senior HPC Officer Department of Physics, Technical University of Denmark

4 4

Setting QoS with slurm 24.05.7
by Patrick Begou 25 Apr '25

25 Apr '25

Hi all, I'm trying to setup a QoS on a small 5 nodes cluster running slurm 24.05.7. My goal is to limit the resources on a (time x number of cores) strategy to avoid one large job requesting all the resources for too long time. I've read from https://slurm.schedmd.com/qos.html and some discussion but my setup is still not working. I think I need to set these informations: MaxCPUsPerJob=172800 MaxWallDurationPerJob=48:00:00 Flags=DenyOnLimit,OverPartQOS for: 12h max for 240 cores => (12*240*60=172800mn) no job can exceed 2 days do not accept jobs out of these limits. What I've done: 1) create the QoS: sudo sacctmgr add qos workflowlimit \ MaxWallDurationPerJob=48:00:00 \ MaxCPUsPerJob=172800 \ Flags=DenyOnLimit,OverPartQOS 2) Check sacctmgr show qos Name=workflowlimit format=Name%16,MaxTRES,MaxWall Name MaxTRES MaxWall ---------------- ------------- ----------- workflowlimit cpu=172800 2-00:00:00 3) Set the QoS for the account "most" which is the default account for the users: sudo sacctmgr modify account name=most set qos=workflowlimit 4) Check $ sacctmgr show assoc format=account,cluster,user,qos Account Cluster User QOS ---------- ---------- ---------- -------------------- root osorno normal root osorno root normal legi osorno normal most osorno workflowlimit most osorno begou workflowlimit 5) Modifiy slurm.conf with: AccountingStorageEnforce=limits,qos and propagate on the 5 nodes and the front end (done via Ansible) 6) Check clush -b -w osorno-fe,osorno,osorno-0-[0-4] 'grep AccountingStorageEnforce /etc/slurm/slurm.conf' --------------- osorno,osorno-0-[0-4],osorno-fe (7) --------------- AccountingStorageEnforce=limits,qos 7) restart slurmd on all the compute nodes and slurmctld + slurmdbd on the management node. But I can still request 400 cores for 24 hours: [begou@osorno ~]$ srun -n 400 -t 24:0:0 --pty bash bash-5.1$ squeue JOBID PARTITION NAME USER ST TIME START_TIME TIME_LIMIT CPUS NODELIST(REASON) 147 genoa bash begou R 0:03 2025-04-18T16:52:11 1-00:00:00 400 osorno-0-[0-4] So I must have missed something ? My partition (I've only one) in slurm.conf is: PartitionName=genoa State=UP Default=YES MaxTime=48:00:00 DefaultTime=24:00:00 Shared=YES OverSubscribe=NO Nodes=osorno-0-[0-4] Thanks Patrick

2 4

Job running slower when using Slurm
by Jeffrey Layton 24 Apr '25

24 Apr '25

Good morning, I'm running an NPB test, bt.C that is OpenMP and built using NV HPC SDK (version 25.1). I run it on a compute node by ssh-ing to the node. It runs in about 19.6 seconds. Then I run the code using a simple job: Command to submit job: sbatch --nodes=1 run-npb-omp The script run-npb-omp is the following: #!/bin/bash cd /home/.../NPB3.4-OMP/bin ./bt.C.x When I use Slurm, the job takes 482 seconds. Nothing really appears in the logs. It doesn't do any IO. No data is copied anywhere. I'm king of at a loss to figure out why. Any suggestions of where to look? Thanks! Jeff

4 9

Strange output of sshare
by frsc＠adm.ku.dk 23 Apr '25

23 Apr '25

Hi all, I'm trying to clean up and reconfigure fair share on a slurm 20.11.9 production cluster after some trial and error before I started looking into it. I don't know the full story and need to pick up here. Fair share is enabled with default settings and not customised. It looks a bit like it was enabled by accident and relevant options are undefined/at default. As a first step I would like to understand the current state. Executing sshare includes output like this (output shortened but complete for the two relevant accounts): Account User Partition RawShares NormShares RawUsage EffectvUsage FairShare -------- ---------- ------------ ---------- ----------- ----------- ------------- ---------- root 0.000000 1002501 1.000000 .root root 1 0.083333 0 0.000000 1.000000 .A1 1 0.083333 0 0.000000 ..A1 U1 P1 1 0.166667 0 0.000000 0.873684 ..A1 U2 P1 1 0.166667 0 0.000000 0.873684 ..A1 U3 P1 1 0.166667 0 0.000000 0.873684 ..A1 U3 P2 1 0.166667 0 0.000000 0.873684 ..A1 U4 P3 1 0.166667 0 0.000000 0.873684 ..A1 U4 P1 1 0.166667 0 1.000000 0.821053 <== What is going on here?? .A2 1 0.083333 0 0.000000 ..A2 U5 P2 1 0.142857 0 0.000000 1.000000 ..A2 U5 P1 1 0.142857 0 0.000000 1.000000 ..A2 U6 P4 1 0.142857 0 0.000000 1.000000 ..A2 U6 P1 1 0.142857 0 0.000000 1.000000 ..A2 U6 P2 1 0.142857 0 0.000000 1.000000 ..A2 U7 P1 1 0.142857 0 0.000000 1.000000 ..A2 U7 P2 1 0.142857 0 0.000000 1.000000 User U4 is not a member of any other account. I understand everything about this output except the line I marked. Both accounts A1 and A2 have zero usage, yet, for user U4 on partition P1 we have effective usage 1.0, screwing the fair share factors up for everyone in this account. As far as I can tell, both accounts should look identical with a fair share factor of 1 for every user. I'm grateful for any pointer for what to look for. Best regards, Frank

2 1

Slurm webhooks
by Davide DelVento 22 Apr '25

22 Apr '25

Happy Monday everybody, I've gotten a request to have Slurm notify users for the typical email things (job started, completed, failed, etc) with a REST API instead of email. This would allow notifications in MS Teams, Slack, or log stuff in some internal websites and things like that. As far as I can tell, Slurm does not support that, for example there was somebody who was looking for that on Galaxy and did not find a solution: https://help.galaxyproject.org/t/web-hook-post-to-external-url-when-job-beg… Is that indeed the case, as searching the web indicates? If Slurm does not support this, is there a workaround? For example, I'm thinking of installing a local SMTP server, or an alternative/dummy mailx program which instead of relaying emails as requested would post an encrypted web url thing using the information from the email. I am sure I could actually write such a software myself, but I don't have enough time to dedicate to the design, maintenance and debugging of such, so I am looking for something decent already in existence. A cursory web search did not find anything suitable, but perhaps I did not look in the appropriate places, because my gut feeling is that somebody must have already had such an itch to scratch! Any other ideas about alternative ways to accomplish this? Thanks

3 3

problem with slurmd dynamic mode with slurmctld in docker
by stef53864 22 Apr '25

22 Apr '25

hi everybody, i try to user dynamic mode with configless mode with slurm 24.11.3 and upgrade to 24.11.4 with slurmd and i found a problem. slurmctld is a container with docker, and my node is outside the container network . slurmctld register my ip with a function getpeeraddr on the slurmctld socket. but my ip connected to the socket come from the docker nat/bridge so slurmctld register my ip bridged ( not my real ip ) that is to say the docker gateway (172.20.0.1) *scontrol show node* *-------------------------* *NodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=172.20.0.1 NodeHostName=ltlsbubble1 Version=24.11.4* so the node go down after the "not pinging it" timeout i try to update the config *scontrol uupdate NodeName=ltlsbubble1* *NodeAddr=xx.xx.xx.xx* but a the first *scontrol reconfigure * it comes back to : *NodeAddr=172.20.0.1* in normal mode ------------------- *scontrol show nodeNodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=ltlsbubble1 NodeHostName=ltlsbubble1 Version=24.11.4* in normal mode NodeAddr is the same than NodeName , so it use DNS resolution for communication. to verify my hypothesis, i go to the c code of slurm, identify the register function and replace it with the same mechanism than normal node in src/slurmctld/node_mgr.c i replace : set_node_comm_name(node_ptr, *comm_name*, reg_msg->hostname); by set_node_comm_name(node_ptr, NULL, reg_msg->hostname); i rebuild slutmctld with this patch and try it with dynamic mode , it works like expected *scontrol show nodeNodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=ltlsbubble1 NodeHostName=ltlsbubble1 Version=24.1* no ip in nodeAddr , but only the nodename, so it use DNS resolution . the node works fine and no goes down for timeout ping so my question : can we have an option to force DNS resolution instead ip discover in Dynamic mode ? ( i try the option cloud_dns, but it not seems the purpose of this option) best regard, Stephane

1 0

pam_slurm_adopt ambiguity in instructions and with ssd
by Robert Kudyba 21 Apr '25

21 Apr '25

In the instructions for pam_slurm_adopt <https://slurm.schedmd.com/pam_slurm_adopt.html#ssh_config>, there are instructions such as: > > Add the following line to the appropriate file in /etc/pam.d, such as > system-auth or sshd (you may use either the "required" or "sufficient" > PAM control flag): This module is configurable. Add these options to the end of the > pam_slurm_adopt line in the appropriate file in /etc/pam.d/ (e.g., sshd > or system-auth): Assuming an OS like CentOS does this mean it should be put in both? slurm.conf on the node has: UsePAM yes slurm.conf has PrologFlags=contain and ProctrackType=proctrack/cgroup I placed the call here only in /etc/pam.d/sshd making sure it is the last line in the account stack. #%PAM-1.0 auth required pam_sepermit.so auth substack system-auth auth include postlogin # Used with polkit to reauthorize users in remote sessions -auth optional pam_reauthorize.so prepare account required pam_nologin.so account include system-auth -account required pam_slurm_adopt.so so pam_sss.so is at the bottom of /etc/pam.d/sshd session optional pam_keyinit.so revoke session required pam_limits.so #-session optional pam_systemd.so session optional pam_oddjob_mkhomedir.so umask=0022 skel=/etc/skel session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_sss.so We're testing this on an idle node. I start an interactive srun. However trying to ssh to the node gets: Apr 18 11:13:41 node11 sshd[33355]: Authorized to dk2643, krb5 principal user(a)ouruni.EDU (ssh_gssapi_krb5_cmdok) Apr 18 11:13:41 node11 sshd[33355]: pam_sss(sshd:account): Access denied for user user: 6 (Permission denied) Apr 18 11:13:41 node11 sshd[33355]: fatal: Access denied for user user by PAM account configuration [preauth] Am I missing something?

3 5

Issue with Enforcing GPU Usage Limits in Slurm
by lyz＠simplehpc.com 17 Apr '25

17 Apr '25

Hi, I am currently encountering an issue with Slurm's GPU resource limitation. I have attempted to restrict the number of GPUs a user can utilize by executing the following command: sacctmgr modify user lyz set MaxTRES=gres/gpu=2 This command is intended to limit user 'lyz' to using a maximum of 2 GPUs. However, when the user submits a job using srun, specifying CUDA 0, 1, 2, and 3 in the job script, or os.environ["CUDA_VISIBLE_DEVICES"] = "0,1,2,3", the job still utilizes all 4 GPUs during execution. This indicates that the GPU usage limit is not being enforced as expected. How can I resolve this situation.

4 14

pam_slurm_adopt and multiple jobs on the same worker node
by Massimo Sgaravatto 14 Apr '25

14 Apr '25

Dear all With the pam_slurm_adopt module as far as I understand you can ssh to a worker node if there is at least a job running on the node by that user. If there are multiple jobs, if I am not wrong you will be "mapped" to the last job started on the node. And, if you are using cgroups, you will be "confined" to the resources assigned to this "last" job. Is it possible in some way to specify the job to be mapped, in case there are multiple jobs for that user on the same node ? Thanks, Massimo

2 2

sllurmrestd via unix socket
by Brian Andrus 10 Apr '25

10 Apr '25

All, Maybe someone has seen this. I have slurmrestd running listening on port 8081 as well as a unix socket at /run/slurmrestd/slurmrestd.sock I am able to query the port with curl and do a ping. Everything seems fine. Other commands work as well. "pings": [ { "hostname": "head01", "pinged": "UP", "responding": true, "latency": 1605, "mode": "primary", "primary": true }, { "hostname": "head02", "pinged": "UP", "responding": true, "latency": 2353, "mode": "backup", "primary": false } When I try doing so via socket, however, my two head nodes show 'DOWN' : "pings": [ { "hostname": "head01", "pinged": "DOWN", "latency": 11784, "mode": "primary" }, { "hostname": "head02", "pinged": "DOWN", "latency": 12668, "mode": "backup" } Other commands fail with: "error_number": 1007, "error": "Protocol authentication error", I'll admit, I don't usually use sockets, so I could easily be overlooking something there. Permissions on the socket look right. I am getting json back, so it is connecting. Note: slurmrestd is running under it's own user (not root and not slurmuser). Any ideas? Thanks in advance, Brian Andrus

1 0

Minimum cpu cores per node partition level configuration
by Jeherul Islam 10 Apr '25

10 Apr '25

Dear All, I need to configure the slurm so the user must take a certain minimum number of CPU cores for a particular partition(not system-wide). Otherwise, the job must not run. Any suggestions will be highly appreciated. With Thanks and Regards -- Jeherul Islam

4 4

weird sacct behavior?
by Pierre Abele 10 Apr '25

10 Apr '25

Hi everyone, I am currently stuck with an sacct issue and would appreciate any help/hints/ideas: My users cannot retrieve job data from their currently running jobs through sacct anymore. Running sacct -a as root also reproduces this issue: It does not show running jobs, but both sacct -j <JobID> and squeue -j <JobID> do. AFAICT, this is not intended behavior (?). Also including longer time windows witch sacct -S ... -E did not help. root@slurmmaster:~# sacct -a | grep 154415 # this returns nothing root@slurmmaster:~# sacct -j 154415 JobID JobName Partition Account AllocCPUS State ExitCode ------------ ---------- ---------- ---------- ---------- ---------- -------- 154415 allocation primevo 0 PENDING 0:0 154415.batch batch primevo 2 RUNNING 0:0 154415.exte+ extern primevo 2 RUNNING 0:0 root@slurmmaster:~# squeue -j 154415 JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 154415 standard genedrop username R 1:31 1 hpc020 Also, possibly related, we had a slurmdbd crash before this changed. We run Ubuntu Server 24.04 LTS with Slurm 24.05.4, using a MariaDB accounting database hosted on the same machine as the Slurm controller. Does anyone here have any ideas? Best, Pierre -- Pierre Abele, M.Sc. HPC Administrator Max-Planck-Institute for Evolutionary Anthropology Department of Primate Behavior and Evolution Deutscher Platz 6 04103 Leipzig Room: U2.80 E-Mail: pierre_abele(a)eva.mpg.de Phone: +49 (0) 341 3550 245

1 0

Re: slurmctld HA ; backup controller doesn't schedule and start any job
by Hiromasa Watanabe 10 Apr '25

10 Apr '25

Hi all, Fortunately I solved this problem by changing Slurm version from 22.05.9 to 23.11.10. With Slurm 23.11.10, after stopping the primary slurmctld and slurmdbd, when I submit a job with sbatch while backup slurmctld and slurmdbd are running, the job becomes scheduled and runs. I don't know why, but this is OK. Thanks, Hiro

1 0

errors while trying to setup slurmdbd.
by Steven Jones 10 Apr '25

10 Apr '25

root@vuwunicohpcdbp1 ~]# systemctl status slurmdbd × slurmdbd.service - Slurm DBD accounting daemon Loaded: loaded (/usr/lib/systemd/system/slurmdbd.service; enabled; preset: disabled) Active: failed (Result: exit-code) since Thu 2025-04-10 10:28:52 NZST; 2min 33s ago Duration: 85ms Process: 2413 ExecStart=/usr/sbin/slurmdbd -D -s $SLURMDBD_OPTIONS (code=exited, status=1/FAILURE) Main PID: 2413 (code=exited, status=1/FAILURE) CPU: 11ms Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: Started Slurm DBD accounting daemon. Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: accounting_storage/as_mysql: _check_mysql_concat_is_sane: MySQL server version > Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: accounting_storage/as_mysql: init: Accounting storage MYSQL plugin loaded Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: fatal: This host not configured to run SlurmDBD ((vuwunicohpcdbp1 or vuwunicohp> Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: slurmdbd.service: Main process exited, code=exited, status=1/FAILURE Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: slurmdbd.service: Failed with result 'exit-code'. lines 1-14/14 (END) This is a current RHEL9.5 [root@vuwunicohpcdbp1 ~]# rpm -qi mariadb Name : mariadb Epoch : 3 Version : 10.5.27 Release : 1.el9_5 Architecture: x86_64 Install Date: Fri 04 Apr 2025 11:13:14 AM NZDT Group : Unspecified Size : 18784786 License : GPLv2 and LGPLv2 Signature : RSA/SHA256, Fri 06 Dec 2024 10:47:26 PM NZDT, Key ID 199e2f91fd431d51 Source RPM : mariadb-10.5.27-1.el9_5.src.rpm Build Date : Thu 05 Dec 2024 03:22:03 PM NZDT Build Host : x86-64-04.build.eng.rdu2.redhat.com Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla> Vendor : Red Hat, Inc. URL : http://mariadb.org Summary : A very fast and robust SQL database server Description : MariaDB is a community developed fork from MySQL - a multi-user, multi-threaded SQL database server. It is a client/server implementation consisting of a server daemon (mariadbd) and many different client programs and libraries. The base package contains the standard MariaDB/MySQL client programs and utilities. [root@vuwunicohpcdbp1 ~]# ========= # Example slurmdbd.conf file. # # See the slurmdbd.conf man page for more information. # # Archive info #ArchiveJobs=yes #ArchiveDir="/tmp" #ArchiveSteps=yes #ArchiveScript= #JobPurge=12 #StepPurge=1 # # Authentication info AuthType=auth/munge #AuthInfo=/var/run/munge/munge.socket.2 # # slurmDBD info DbdAddr=127.0.0.1 #DbdAddr=localhost DbdHost=vuwunicoslurmrp1.ods.vuw.ac.nz #DbdHost=localhost DbdPort=6819 SlurmUser=slurm #MessageTimeout=300 DebugLevel=verbose #DefaultQOS=normal,standby LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurmdbd/slurmdbd.pid #PluginDir=/usr/lib/slurm #PrivateData=accounts,users,usage,jobs #TrackWCKey=yes # # Database info StorageType=accounting_storage/mysql #StorageHost=localhost StorageHost=127.0.0.1 #StoragePort=1234 StoragePort=3306 #StoragePort=6819 #StoragePass=xxxxx StoragePass=xxxxxx #StoragePass=aPIkaEqxLrA StorageUser=slurm StorageLoc=slurm_acct_db #ssj # ##ssj fini ============ This ran in test just fine but the slurm version is slightly newer in this case, [root@vuwunicohpcdbp1 admjonesst1]# rpm -qa |grep slurm slurm-24.11.3-1.el9.x86_64 slurm-slurmdbd-24.11.3-1.el9.x86_64 [root@vuwunicohpcdbp1 admjonesst1]# rpm -qi slurm-slurmdbd-24.11.3-1.el9.x86_64 Name : slurm-slurmdbd Version : 24.11.3 Release : 1.el9 Architecture: x86_64 Install Date: Mon 07 Apr 2025 01:58:32 PM NZST Group : System Environment/Base Size : 2959288 License : GPLv2+ Signature : (none) Source RPM : slurm-24.11.3-1.el9.src.rpm Build Date : Mon 07 Apr 2025 12:54:21 PM NZST Build Host : vuwunicoslurmp1.ods.vuw.ac.nz URL : https://slurm.schedmd.com/ Summary : Slurm database daemon Description : Slurm database daemon. Used to accept and process database RPCs and upload database changes to slurmctld daemons on each cluster [root@vuwunicohpcdbp1 admjonesst1]# regards Steven

2 2

pam error, related to accounting?
by David Bremner 09 Apr '25

09 Apr '25

Recently I enabled accounting on my tiny (1 compute node, one head node) slurm cluster. slurmdbd.conf looks like AuthType=auth/munge DbdHost=vertex DbdPort=6819 SlurmUser=slurm StorageHost=localhost StorageType=accounting_storage/mysql StorageUser=slurm StoragePass=#elided# StoragePort=3306 StorageLoc=slurm_acct_db PurgeEventAfter=30days PurgeJobAfter=30days PurgeResvAfter=30days PurgeStepAfter=30days PurgeSuspendAfter=30days Some potentially relevant parts of slurmd.conf are: UsePAM=1 ProctrackType=proctrack/cgroup SelectTypeParameters=CR_Core_Memory AccountingStorageType=accounting_storage/slurmdbd ClusterName=simplex JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup Since I enabled accounting the output from every job (whether started by srun or sbatch) finishes with slurmstepd-simplex: error: pam_close_session: Cannot make/remove an entry for the specified session /etc/pamd.d/slurm has the following content auth required pam_localuser.so auth required pam_shells.so account required pam_unix.so account required pam_access.so session required pam_unix.so session optional pam_systemd.so Accounting seems to be working OK. Does anyone know what PAM related code paths could be triggered by enabling accounting? d

1 0

recommended freeIPMI version
by Heckes, Frank 09 Apr '25

09 Apr '25

Hi all, I’d like to update to SLURM version 24.11.4. I was searching for a recommendation for freeIPMI (power measurement), but couldn’t find one on the schedMD web-pages (sorry, if I overlooked it). The latest available freeIPMI is 1.6.15 (https://ftp.gnu.org/gnu/freeipmi/freeipmi-1.6.15.tar.gz). Does anyone knows whether this is the best choice? Many thanks in advance for any advice. Cheers, -Frank

3 4

slurmctld HA ; backup controller doesn't schedule and start any job
by hiromasa.watanabe＠gmail.com 09 Apr '25

09 Apr '25

slurmctld HA ; backup controller doesn't schedule and start any job Hi all, I am trying a slurmctld HA configuration on two servers, using slurm version 22.05.9 of AlmaLinux 9.4. The problem is, after stopping the primary slurmctld and slurmdbd, when I submit a job with sbatch while backup slurmctld and slurmdbd are running, the job will be pending with Reason=None, and it will not be scheduled and will not start running. $ squeue JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 43 cpu_multi job hpc PD 0:00 1 (None) Why won't my job start running? What should I change to get the job to start running? The slurmctld.log and configuration files are shown below. Backup's slurmctld.log： [2025-04-09T15:31:17.000] debug3: Heartbeat at 1744180276 [2025-04-09T15:31:18.000] debug3: Heartbeat at 1744180277 [2025-04-09T15:31:19.022] debug3: Heartbeat at 1744180279 [2025-04-09T15:31:19.605] debug2: Processing RPC: REQUEST_SUBMIT_BATCH_JOB from UID=1000 [2025-04-09T15:31:19.605] debug3: _set_hostname: Using auth hostname for alloc_node: compute1 [2025-04-09T15:31:19.605] debug3: JobDesc: user_id=1000 JobId=N/A partition=cpu_multi name=job [2025-04-09T15:31:19.605] debug3: cpus=2-4294967294 pn_min_cpus=1 core_spec=-1 [2025-04-09T15:31:19.605] debug3: Nodes=1-[1] Sock/Node=65534 Core/Sock=65534 Thread/Core=65534 [2025-04-09T15:31:19.605] debug3: pn_min_memory_job=18446744073709551615 pn_min_tmp_disk=-1 [2025-04-09T15:31:19.605] debug3: immediate=0 reservation=(null) [2025-04-09T15:31:19.605] debug3: features=(null) batch_features=(null) cluster_features=(null) prefer=(null) [2025-04-09T15:31:19.605] debug3: req_nodes=(null) exc_nodes=(null) [2025-04-09T15:31:19.605] debug3: time_limit=-1--1 priority=-1 contiguous=0 shared=-1 [2025-04-09T15:31:19.605] debug3: kill_on_node_fail=-1 script=#! /bin/bash #SBATCH -p cpu_multi #SBATC... [2025-04-09T15:31:19.605] debug3: argv="./twocore.sh" [2025-04-09T15:31:19.605] debug3: environment=SHELL=/bin/bash,PYENV_SHELL=bash,HISTCONTROL=ignoredups,... [2025-04-09T15:31:19.605] debug3: stdin=/dev/null stdout=/misc/home/hpc/slurmtest/twocore_%J.out stderr=(null) [2025-04-09T15:31:19.605] debug3: work_dir=/misc/home/hpc/slurmtest alloc_node:sid=compute1:281600 [2025-04-09T15:31:19.605] debug3: power_flags= [2025-04-09T15:31:19.605] debug3: resp_host=(null) alloc_resp_port=0 other_port=0 [2025-04-09T15:31:19.605] debug3: dependency=(null) account=(null) qos=(null) comment=(null) [2025-04-09T15:31:19.605] debug3: mail_type=0 mail_user=(null) nice=0 num_tasks=2 open_mode=0 overcommit=-1 acctg_freq=(null) [2025-04-09T15:31:19.605] debug3: network=(null) begin=Unknown cpus_per_task=1 requeue=-1 licenses=(null) [2025-04-09T15:31:19.605] debug3: end_time= signal=0@0 wait_all_nodes=-1 cpu_freq= [2025-04-09T15:31:19.605] debug3: ntasks_per_node=-1 ntasks_per_socket=-1 ntasks_per_core=-1 ntasks_per_tres=-1 [2025-04-09T15:31:19.605] debug3: mem_bind=0:(null) plane_size:65534 [2025-04-09T15:31:19.605] debug3: array_inx=(null) [2025-04-09T15:31:19.605] debug3: burst_buffer=(null) [2025-04-09T15:31:19.605] debug3: mcs_label=(null) [2025-04-09T15:31:19.605] debug3: deadline=Unknown [2025-04-09T15:31:19.605] debug3: bitflags=0x1a00c000 delay_boot=4294967294 [2025-04-09T15:31:19.605] debug3: assoc_mgr_fill_in_user: found correct user: hpc(1000) [2025-04-09T15:31:19.605] debug5: assoc_mgr_fill_in_assoc: looking for assoc of user=hpc(1000), acct=hpc, cluster=cluster, partition=cpu_multi [2025-04-09T15:31:19.605] debug3: assoc_mgr_fill_in_assoc: found correct association of user=hpc(1000), acct=hpc, cluster=cluster, partition=cpu_multi to assoc=16 acct=hpc [2025-04-09T15:31:19.605] debug3: found correct qos [2025-04-09T15:31:19.607] debug2: priority/multifactor: priority_p_set: initial priority for job 44 is 33 [2025-04-09T15:31:19.607] debug2: found 1 usable nodes from config containing compute1 [2025-04-09T15:31:19.607] debug2: found 1 usable nodes from config containing compute2 [2025-04-09T15:31:19.607] debug3: _pick_best_nodes: JobId=44 idle_nodes 2 share_nodes 2 [2025-04-09T15:31:19.607] debug2: select/cons_tres: select_p_job_test: evaluating JobId=44 [2025-04-09T15:31:19.607] debug2: sched: JobId=44 allocated resources: NodeList=(null) [2025-04-09T15:31:19.607] _slurm_rpc_submit_batch_job: JobId=44 InitPrio=33 usec=2490 [2025-04-09T15:31:19.608] debug3: create_mmap_buf: loaded file `/var/spool/slurm/ctld/job_state` as buf_t [2025-04-09T15:31:19.609] debug3: Writing job id 45 to header record of job_state file [2025-04-09T15:31:21.000] debug3: Heartbeat at 1744180280 [2025-04-09T15:31:21.257] debug2: _slurm_connect: failed to connect to 192.168.56.11:6817: Connection refused [2025-04-09T15:31:21.257] debug2: Error connecting slurm stream socket at 192.168.56.11:6817: Connection refused [2025-04-09T15:31:22.000] debug3: Heartbeat at 1744180282 [2025-04-09T15:31:24.000] debug3: Heartbeat at 1744180283 [2025-04-09T15:31:25.004] debug3: Heartbeat at 1744180285 [2025-04-09T15:31:27.001] debug3: Heartbeat at 1744180287 [2025-04-09T15:31:29.000] debug3: Heartbeat at 1744180288 [2025-04-09T15:31:30.000] debug3: Heartbeat at 1744180289 [2025-04-09T15:31:31.006] debug3: Heartbeat at 1744180291 [2025-04-09T15:31:32.822] debug2: _slurm_connect: failed to connect to 192.168.56.11:6817: Connection refused [2025-04-09T15:31:32.822] debug2: Error connecting slurm stream socket at 192.168.56.11:6817: Connection refused [2025-04-09T15:31:33.007] debug3: Heartbeat at 1744180293 [2025-04-09T15:31:35.000] debug3: Heartbeat at 1744180294 [2025-04-09T15:31:36.002] debug3: Heartbeat at 1744180296 [2025-04-09T15:31:36.395] debug2: select/cons_tres: select_p_job_test: evaluating JobId=43 [2025-04-09T15:31:36.395] debug2: select/cons_tres: select_p_job_test: evaluating JobId=44 [2025-04-09T15:31:38.000] debug3: Heartbeat at 1744180297 [2025-04-09T15:31:38.497] debug2: Performing purge of old job records [2025-04-09T15:31:39.000] debug3: Heartbeat at 1744180298 [2025-04-09T15:31:40.000] debug3: Heartbeat at 1744180300 [2025-04-09T15:31:40.655] debug2: Testing job time limits and checkpoints [2025-04-09T15:31:42.000] debug3: Heartbeat at 1744180301 [2025-04-09T15:31:43.000] debug3: Heartbeat at 1744180302 slurm.conf: ClusterName=cluster SlurmctldHost=gateway1 #Primary(192.168.56.11) SlurmctldHost=gateway2 #Backup(192.168.56.12) MpiDefault=pmix ProctrackType=proctrack/cgroup PrologFlags=Contain ReturnToService=0 SlurmctldPidFile=/var/run/slurm/slurmctld.pid SlurmctldPort=6817 SlurmdPidFile=/var/run/slurm/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurm/d SlurmUser=slurm StateSaveLocation=/var/spool/slurm/ctld SwitchType=switch/none TaskEpilog=/etc/slurm/taskepilog.sh TaskPlugin=task/cgroup,task/affinity TaskProlog=/etc/slurm/taskprolog.sh InactiveLimit=0 KillWait=30 MinJobAge=300 SlurmctldTimeout=10 SlurmdTimeout=300 Waittime=0 DefMemPerCPU=32 SchedulerType=sched/builtin SelectType=select/cons_tres SelectTypeParameters=CR_Core_Memory PriorityType=priority/multifactor PriorityWeightPartition=1000 AccountingStorageHost=gateway1 AccountingStorageBackupHost=gateway2 AccountingStorageType=accounting_storage/slurmdbd AccountingStoreFlags=job_comment JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup SlurmctldDebug=debug5 SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmdLogFile=/var/log/slurm/slurmd.log NodeName=compute1 CPUs=4 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=1 RealMemory=3900 Weight=1 NodeName=compute2 CPUs=4 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=1 RealMemory=3900 Weight=1 PartitionName=gpu_single Nodes=ALL PriorityJobFactor=30 MaxTime=INFINITE State=UP Default=YES PartitionName=cpu_single Nodes=ALL PriorityJobFactor=10 MaxTime=INFINITE State=UP PartitionName=cpu_multi Nodes=ALL MaxTime=INFINITE State=UP slurmdbd.conf: AuthType=auth/munge DebugLevel=4 DbdHost=gateway1 DbdBackupHost=gateway2 LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurm/slurmdbd.pid PurgeEventAfter=1month PurgeJobAfter=1month PurgeResvAfter=1month PurgeStepAfter=1month PurgeSuspendAfter=1month PurgeTXNAfter=1month PurgeUsageAfter=1month SlurmUser=slurm StorageType=accounting_storage/mysql StorageHost=gateway1 StoragePass=mypassword StorageUser=slurm Best regards, Hiro

1 0

Slurm version 24.11.4 is now available
by Marshall Garey 08 Apr '25

08 Apr '25

We are pleased to announce the availability of Slurm version 24.11.4. This release fixes a variety of major to minor severity bugs. Some edge cases that caused jobs to pend forever are fixed. Notable stability issues that are fixed include: * slurmctld crashing upon receiving a certain heterogeneous job submission. * slurmd crashing after a communications failure with a slurmstepd. * A variety of race conditions related to receiving and processing connections, including one that resulted in the slurmd ignoring new RPC connections. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > -- slurmctld,slurmrestd - Avoid possible race condition that could have caused > process to crash when listener socket was closed while accepting a new > connection. > -- slurmrestd - Avoid race condition that could have resulted in address > logged for a UNIX socket to be incorrect. > -- slurmrestd - Fix parameters in OpenAPI specification for the following > endpoints to have "job_id" field: > GET /slurm/v0.0.40/jobs/state/ > GET /slurm/v0.0.41/jobs/state/ > GET /slurm/v0.0.42/jobs/state/ > GET /slurm/v0.0.43/jobs/state/ > -- slurmd - Fix tracking of thread counts that could cause incoming > connections to be ignored after burst of simultaneous incoming connections > that trigger delayed response logic. > -- Stepmgr - Avoid unnecessary SRUN_TIMEOUT forwarding to stepmgr. > -- Fix jobs being scheduled on higher weighted powered down nodes. > -- Fix how backfill scheduler filters nodes from the available nodes based on > exclusive user and mcs_label requirements. > -- acct_gather_energy/{gpu,ipmi} - Fix potential energy consumption adjustment > calculation underflow. > -- acct_gather_energy/ipmi - Fix regression introduced in 24.05.5 (which > introduced the new way of preserving energy measurements through slurmd > restarts) when EnergyIPMICalcAdjustment=yes. > -- Prevent slurmctld deadlock in the assoc mgr. > -- Fix memory leak when RestrictedCoresPerGPU is enabled. > -- Fix preemptor jobs not entering execution due to wrong calculation of > accounting policy limits. > -- Fix certain job requests that were incorrectly denied with node > configuration unavailable error. > -- slurmd - Avoid crash due when slurmd has a communications failure with > slurmstepd. > -- Fix memory leak when parsing yaml input. > -- Prevent slurmctld from showing error message about PreemptMode=GANG being a > cluster-wide option for `scontrol update part` calls that don't attempt to > modify partition PreemptMode. > -- Fix setting GANG preemption on partition when updating PreemptMode with > scontrol. > -- Fix CoreSpec and MemSpec limits not being removed from previously > configured slurmd. > -- Avoid race condition that could lead to a deadlock when slurmd, slurmstepd, > slurmctld, slurmrestd or sackd have a fatal event. > -- Fix jobs using --ntasks-per-node and --mem keep pending forever when the > requested mem divided by the number of cpus will surpass the configured > MaxMemPerCPU. > -- slurmd - Fix address logged upon new incoming RPC connection from "INVALID" > to IP address. > -- Fix memory leak when retrieving reservations. This affects scontrol, sinfo, > sview, and the following slurmrestd endpoints: > 'GET /slurm/{any_data_parser}/reservation/{reservation_name}' > 'GET /slurm/{any_data_parser}/reservations' > -- Log warning instead of debuflags=conmgr gated log when deferring new > incoming connections when number of active connections exceed > conmgr_max_connections. > -- Avoid race condition that could result in worker thread pool not activating > all threads at once after a reconfigure resulting in lower utilization of > available CPU threads until enough internal activity wakes up all threads > in the worker pool. > -- Avoid theoretical race condition that could result in new incoming RPC > socket connections being ignored after reconfigure. > -- slurmd - Avoid race condition that could result in a state where new > incoming RPC connections will always be ignored. > -- Add ReconfigFlags=KeepNodeStateFuture to restore saved FUTURE node state on > restart and reconfig instead of reverting to FUTURE state. This will be > made the default in 25.05. > -- Fix case where hetjob submit would cause slurmctld to crash. > -- Fix jobs using --cpus-per-gpu and --mem keep pending forever when the > requested mem divided by the number of cpus will surpass the configured > MaxMemPerCPU. > -- Enforce that jobs using --mem and several --*-per-* options do not violate > the MaxMemPerCPU in place. > -- slurmctld - Fix use-cases of jobs incorrectly pending held when --prefer > features are not initially satisfied. > -- slurmctld - Fix jobs incorrectly held when --prefer not satisfied in some > use-cases. > -- Ensure RestrictedCoresPerGPU and CoreSpecCount don't overlap.

1 0

slurm send email status with no details
by Oren 07 Apr '25

07 Apr '25

Hi, We set up a slurm system with email notification, this is the slurm.conf `MailProg=/usr/sbin/sendmail` But the email that I get has not status, just an empty message: [image: image.png] no subject, no info, what are we missing? Thanks~

2 1

Run a command in Slurm with all streams and signals connected to the submitting command
by Michael Milton 07 Apr '25

07 Apr '25

I'm helping with a workflow manager that needs to submit Slurm jobs. For logging and management reasons, the job (e.g. srun python) needs to be run as though it were a regular subprocess (python): - stdin, stdout and stderr for the command should be connected to process inside the job - signals sent to the command should be sent to the job process - We don't want to use the existing job allocation, if this is run from a Slurm job - The command should only terminate when the job is finished, to avoid us needing to poll Slurm We've tried: - sbatch --wait, but then SIGTERM'ing the process doesn't kill the job - salloc, but that requires a TTY process to control it (?) - salloc srun seems to mess with the terminal when it's killed, likely because of being "designed to be executed in the foreground" - Plain srun re-uses the existing Slurm allocation, and specifying resources like --mem will just request then from the current job rather than submitting a new one What is the best solution here?

2 2

Re: Run a command in Slurm with all streams and signals connected to the submitting command
by Michael Milton 05 Apr '25

05 Apr '25

Thanks Davide, It's true that srun will create an allocation if you aren't inside a job, but if you are inside a job and you request more resources than it has, then srun will just fail. This is the key issue that I want to avoid. On Sat, Apr 5, 2025 at 11:48 AM Davide DelVento <davide.quantum(a)gmail.com> wrote: > The plain srun is probably the best bet, and if you really need the thing > to be started from another slurm job (rather than the login node) you will > need to exploit the fact that > > > If necessary, srun will first create a resource allocation in which to > run the parallel job. > > AFAIK, there is no option to for the "create a resource allocation" even > if it's not necessary. But you may try to request something that is "above > and beyond" what the current allocation provides, and that might solve your > problem. > Looking at the srun man page, I could speculate that --clusters > or --cluster-constraint might help in that regard (but I am not sure). > > Have a nice weekend > > > On Fri, Apr 4, 2025 at 6:27 AM Michael Milton via slurm-users < > slurm-users(a)lists.schedmd.com> wrote: > >> I'm helping with a workflow manager that needs to submit Slurm jobs. For >> logging and management reasons, the job (e.g. srun python) needs to be run >> as though it were a regular subprocess (python): >> >> - stdin, stdout and stderr for the command should be connected to >> process inside the job >> - signals sent to the command should be sent to the job process >> - We don't want to use the existing job allocation, if this is run >> from a Slurm job >> - The command should only terminate when the job is finished, to >> avoid us needing to poll Slurm >> >> We've tried: >> >> - sbatch --wait, but then SIGTERM'ing the process doesn't kill the job >> - salloc, but that requires a TTY process to control it (?) >> - salloc srun seems to mess with the terminal when it's killed, >> likely because of being "designed to be executed in the foreground" >> - Plain srun re-uses the existing Slurm allocation, and specifying >> resources like --mem will just request then from the current job rather >> than submitting a new one >> >> What is the best solution here? >> >> -- >> slurm-users mailing list -- slurm-users(a)lists.schedmd.com >> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com >> >

1 0

Best Way to See GPUs in Use?
by Jason Simms 02 Apr '25

02 Apr '25

Hello all, Apologies for the basic question, but is there a straightforward, best-accepted method for using Slurm to report on which GPUs are currently in use? I've done some searching and people recommend all sorts of methods, including parsing the output of nvidia-smi (seems inefficient, especially across multiple GPU nodes), as well as using other tools such as Grafana, XDMoD, etc. We do track GPUs as a resource, so I'd expect I could get at the info with sreport or something like that, but before trying to craft my own from scratch, I'm hoping someone has something working already. Ultimately I'd like to see either which cards are available by node, or the reverse (which are in use by node). I know recent versions of Slurm supposedly added tighter integration in some way with NVIDIA cards, but I can't seem to find definitive docs on what, exactly, changed or what is now possible as a result. Warmest regards, Jason -- *Jason L. Simms, Ph.D., M.P.H.* Research Computing Manager Swarthmore College Information Technology Services (610) 328-8102

3 2

slum job sumisison using different UID/GID
by navin srivastava 02 Apr '25

02 Apr '25

Hi, Can munge depend upon the UID/GID for the job submission? There is a scenario where the cluster is running with the NIS authentication mechanism. There is a login Node created which is part of LDAP and we installed the slurm to interact with slurm master. I am able to run jobs using root but for users it is not working as the UID/GID differ. Is there a way we can overcome this issue? and be able to run jobs. Rehards Navin

1 0

slurm releases
by Patrick Begou 01 Apr '25

01 Apr '25

Hi slurm team, I would ask some clarifications with slurm releases. Why two versions of slurm are available ? I speak of 24.05.7 versus 24.11.3 on https://www.schedmd.com/slurm-support/release-announcements and announces made on this list ? I'm managing small clusters in a french public research lab and I've successfully updated (lets says re-installed as it was very old) an old one with slurm-24.05.3 some month ago. Now I'm trying to deploy a second cluster with the same approach and I've selected 24.11.3-1 (but why not using 24.05.7 ?). Moreover I have some difficulties for deploying 24.11.3 : I've built the rpm with: rpmbuild \ --define '_prefix /usr' \ --with pmix --with ucx --with mysql --with hwloc \ -ta slurm-24.11.3.tar.bz2 but some packages wont install: $ dnf list --showduplicates slurm-slurmd Last metadata expiration check: 0:33:15 ago on Tue Apr 1 18:03:07 2025. Available Packages slurm-slurmd.x86_64 24.11.3-1.el9 bb-local $ sudo dnf install slurm-slurmd Last metadata expiration check: 0:33:03 ago on Tue Apr 1 18:03:25 2025. Error: Problem: conflicting requests - nothing provides is needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local - nothing provides installed needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local - nothing provides not needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) I think I will try to build 24.05.7 or 24.05.3 as a next try but I'm interested in any advices. Thank you Patrick

2 1

cpus and gpus partitions and how to optimize the resource usage
by Massimo Sgaravatto 31 Mar '25

31 Mar '25

Dear all We have just installed a small SLURM cluster composed of 12 nodes: - 6 CPU only nodes: 2 Sockets=2, 96 CoresPerSocket 2, ThreadsPerCore=2, 1.5 TB of RAM - 6 nodes with also GPUS: same conf of the CPU-only node + 4 H100 per node We started with a setup with 2 partitions: - a 'onlycpus' partition which sees all the cpu-only nodes - a 'gpus' partition which sees the nodes with gpus and asked users to use the 'gpus' partition only for jobs that need gpus (for the time being we are not technically enforced that). The problem is that a job requiring a GPU usually needs only a few cores and only a few GB of RAM, which means wasting a lot of CPU cores. And having all nodes in the same partition would mean that there is the risk that a job requiring a GPU can't start if all CPU cores and/or all memory is used by CPU only jobs I went through the mailing list archive and I think that "splitting" a GPU node into two logical nodes (one to be used in the 'gpus' partition and one to be used in the 'onlycpus' partition) as discussed in [*] would help. Since that proposed solution is considered by his author a "bit of a kludge" and since I read that splitting a node into multiple logical nodes is in a general a bad idea, I'd like to understand if you could suggest other/best options. I also found this [**] thread, but I don't like too much that approach (i.e. relying on MaxCPUsPerNode) because it would mean having 3 partition (if I have got it right): two partitions for cpu only jobs and 1 partition for gpu jobs Many thanks, Massimo [*] https://groups.google.com/g/slurm-users/c/IUd7jLKME3M [**] https://groups.google.com/g/slurm-users/c/o7AiYAQ1YJ0

4 5

Preemption question
by Kamil Wilczek 31 Mar '25

31 Mar '25

Dear All, I would like to be able to preempt (SUSPEND) a single QoS of a user that blocks the queue for several days. Currently I have about 100 users on the cluster and it seems that setting the "Preempt" option to each QoS (we have personal QoSes) is not optimal. https://slurm.schedmd.com/sacctmgr.html#OPT_Preempt Is there a way to to set an option to this single problematic QoS, saying that the QoS can be preempted by any other QoS? It would be much more administrator-friendly solution ;) Kind regards -- Kamil Wilczek [https://keys.openpgp.org/] [D415917E84B8DA5A60E853B6E676ED061316B69B]

3 4

Slurm 24.05 and OpenMPI
by Matthias Leopold 28 Mar '25

28 Mar '25

Hi, I built a small Slurm 21.08 cluster with NVIDIA GPU hardware and NVIDIA deepops framework a couple of years ago. It is based on Ubuntu 20.04 and makes use of the NVIDIA pyxis/enroot container solution. For operational validation I used the nccl-tests application in a container. nccl-tests is compiled with MPI support (OpenMPI 4.1.6 or 4.1.7) and I used it also for validation of MPI jobs. Slurm jobs use "pmix" and tasks are launched via srun (not mpirun). Some of the GPUs can talk to each other via Infiniband, but MPI is rarely used at our site and I'm fully aware that my MPI knowledge is very limited. Still it worked with Slurm 21.08. Now I built a Slurm 24.05 cluster based on Ubuntu 24.04 and started to move hardware there. When I run my nccl-tests container (also with newer software) I see error messages like this: [node1:21437] OPAL ERROR: Unreachable in file ext3x_client.c at line 111 -------------------------------------------------------------------------- The application appears to have been direct launched using "srun", but OMPI was not built with SLURM's PMI support and therefore cannot execute. There are several options for building PMI support under SLURM, depending upon the SLURM version you are using: version 16.05 or later: you can use SLURM's PMIx support. This requires that you configure and build SLURM --with-pmix. Versions earlier than 16.05: you must use either SLURM's PMI-1 or PMI-2 support. SLURM builds PMI-1 by default, or you can manually install PMI-2. You must then build Open MPI using --with-pmi pointing to the SLURM PMI library location. Please configure as appropriate and try again. -------------------------------------------------------------------------- *** An error occurred in MPI_Init *** on a NULL communicator *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort, *** and potentially your MPI job) [node1:21437] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed! One simple question: Is this related to https://github.com/open-mpi/ompi/issues/12471? If so: is there some workaround? I'm very grateful for any comments. I know that a lot of detail information is missing, but maybe someone can still already give me a hint where to look. Thanks a lot Matthias

3 10

Doubt with SelectTypeParameters in slurm.conf
by Gestió Servidors 28 Mar '25

28 Mar '25

Hello, I'm running some tests in a very small testing environment (before applying in the real scenario). My environment is only a computer with a old Intel i4 with this "lscpu" configuration: Architecture: x86_64 CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 26 Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz "slurmd -C" returns: "CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2". My slurm.conf is configured with: SelectType=select/cons_tres SelectTypeParameters=CR_Core AccountingStorageTRES=cpu,mem,node,billing,fs/disk,vmem,pages After running a simple "helloworld" test, I have noticed that if SelectTypeParameters=CR_Core, system always reserves me an even number of CPUs (during "pending" time, I can see the real number I have requested, but when job starts "running", that number is increased to the next even number). Howerver, if I reconfigure slurm with SelectTypeParameters=CR_CPU, system reserves me the correct number of CPUs (during "pending" time and, also, during "running" time). I suppose that my system must be configured with CR_CPU, according https://slurm.schedmd.com/cons_tres.html, but could someone confirm that? Thanks.

2 1

bit_cache_init failure on the second time backup controller tries to take control
by Safdar Iqbal 28 Mar '25

28 Mar '25

Hi, We're running into an issue where slurmctld core-dumps with the following error. This happens on the backup controller, if it needs to take over from the primary, _for a second time_. slurmctld: fatal: bit_cache_init: cannot change size once set Has anyone seen this error before? Also if there are any existing discussions and/or tickets related to this, please let me know. Our slurm version is 24.11.1. ________________ Steps to reproduce: 1. On a healthy cluster, we make the primary controller unavailable. Since we're running our cluster on cloud VMs, we cause this by stopping the primary controller VM. 2. From the logs we can see the backup controller take over, and log the message "Running as primary controller" 3. We then start the primary again, making sure the IP addresses and hostnames stay consistent. Once slurmctld on the primary has started and taken back control, we can see the log "Running as primary controller" on that VM. 4. We then stop the primary controller VM again, causing the backup to try taking the control a second time. This time however the slurmctld on the backup coredumps, with following log entries from journalctl -u slurmctld: slurmctld: fatal: bit_cache_init: cannot change size once set slurmctld.service: Main process exited, code=dumped, status=6/ABRT slurmctld.service: Failed with result 'core-dump'. Thanks! - Safdar

1 0

How limit CPUs per node in a partition
by Gestió Servidors 27 Mar '25

27 Mar '25

Hello, I have a testing partition with only a node. That server has 12 CPUs (it's a very old server) (2 sockets, 6 cores per socket, 1 thread per core). That partition, called "test.q" only has that node, so by default, partition test.q has 12 CPUs (all from testing node). However, now I would like to decrease that CPU number from 12 to 4, for example. "slurmd -C" returns "CPUs=12 Boards=1 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=1" as I have said to you before and if in slurm.conf I configure partition in this way "PartitionName=test.q Nodes=test-node MaxTime=10:00 State=UP AllocNodes=clus-login MaxCPUsPerNode=4", partition continues accepting jobs with 12 CPUs. Is it any wrong in my configuration? How could I get my purpose? Thanks. -- [cid:image001.jpg@01DB9F0E.FDD9A7A0]<http://www.uab.cat/> Daniel Ruiz Molina Tècnic Mitjà Informàtic Arquitectura de Computadors i Sistemes Operatius Escola d'Enginyeria Edifici Q - Despatx QC/3052 - Carrer de les Sitges Campus de la UAB · 08193 Bellaterra (Cerdanyola del Vallès) · Barcelona · Spain +34 93 581 35 44 www.uab.cat<http://www.uab.cat/> Daniel Ruiz at UAB<https://tinyurl.com/yd95zb8j> [cid:image002.jpg@01DB9F0E.FDD9A7A0]<www.linkedin.com/in/daniel-ruiz-molina-50a83b27> Aquest missatge s'adreça exclusivament a la persona destinatària i pot contenir informació privada o confidencial. Si l'heu rebut per error, comuniqueu-nos-ho i destruïu-lo, i tingueu present que no teniu autorització per fer-ne cap ús. Abans d'imprimir aquest missatge penseu en el medi ambient.

1 0

Re: Using more cores/CPUs that requested with
by Shunran Zhang 26 Mar '25

26 Mar '25

Ugh I think I did not catch up with the docs. I started with a system that defaults to cgroup v1 but the Slurm doc for that plugin is NOT available at that time. Thus I converted everything to cgroup v2. It appears that they are both supported and that documentation issue is more on the dev side than admin side. Thanks for pointing that out. I misinterpreted the "coming soon" part of cgroup v1 plugin and the "legacy" naming for "do not use". It should be fine. 2025年3月27日(木) 0:48 Williams, Jenny Avis <jenny_williams(a)unc.edu>: > “ … As cgroup is likely not supposed to be used in newer deployments of > Slurm.” > > > > I am curious about this statement. Would someone expand on this, to either > support or counter it? > > > > Jenny Williams > > UNC Chapel Hill > > > > > > *From:* Shunran Zhang via slurm-users <slurm-users(a)lists.schedmd.com> > *Sent:* Wednesday, March 26, 2025 10:52 AM > *To:* Gestió Servidors <sysadmin.caos(a)uab.cat> > *Cc:* Slurm User Community List <slurm-users(a)lists.schedmd.com> > *Subject:* [slurm-users] Re: Using more cores/CPUs that requested with > > > > If you are letting systemd taking most things over, you got systemd-cgtop > that work better than top for your case. There is also systemd-cgls for > non-interactive listing. > > > > Also mind to check if you are using cgroup2? A mount to check your cgroup > would suffice. As cgroup is likely not supposed to be used in newer > deployments of Slurm. > > > > > > 2025年3月26日(水) 17:14 Gestió Servidors via slurm-users < > slurm-users(a)lists.schedmd.com>: > > Hello, > > > > Thanks for your answers. I will try now!! One more question: is there any > way to check if Cgroups restrictions is working fine during a “running” job > or during SLURM scheduling process? > > > > Thanks again! > > > > > -- > slurm-users mailing list -- slurm-users(a)lists.schedmd.com > To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com > >

1 0

Re: Using more cores/CPUs that requested with
by Gestió Servidors 26 Mar '25

26 Mar '25

Hello, Thanks for your answers. I will try now!! One more question: is there any way to check if Cgroups restrictions is working fine during a "running" job or during SLURM scheduling process? Thanks again!

4 3

Using more cores/CPUs that requested with sbatch
by Gestió Servidors 25 Mar '25

25 Mar '25

Hello, I would like to know if there is any mechanism to avoid a user to do "cheating" when he submits a job. For example, a user submits a OpenMP job requesting 1 node (-N 1) and 2 tasks (-n 2). However, inside his script (or compiled in his binany), user uses more than 2 ntasks, for example, all free cores. For SLURM, job is only using 2, but really, node is 100% assigned to that job. SLURM can control that "abuse" in some way? Cgroups? Thanks.

3 2

Re: Using more cores/CPUs that requested with sbatch
by Megan 25 Mar '25

25 Mar '25

Slurm can restrict jobs to their allocated resources using cgroups. To use cgroups you will have to configure the TaskPlugin cgroup option and specify how the cgroups should behave in cgroup.conf. slurm.conf TaskPlugin=task/cgroup Slurm Workload Manager - slurm.conf <https://slurm.schedmd.com/slurm.conf.html#OPT_task/cgroup> cgroup.conf ConstrainCores=yes Slurm Workload Manager - cgroup.conf <https://slurm.schedmd.com/cgroup.conf.html#OPT_ConstrainCores> Regards, --Megan

1 0

slurmrestd equivalent to "srun -n 10 echo HELLO"
by Dan Healy 24 Mar '25

24 Mar '25

Hi Slurm Community, I'm starting to experiment with slurmrestd for a new app we're writing. I'm having trouble understanding one aspect of submitting jobs. When I run something like `srun -n 10 echo HELLO', I get HELLO returned to my console/stdout 10x. When I submit this command as a script to the /jobs/submit route, I get success/200, but *I cannot determine how to get the console output of HELLO 10x in any form*. It's not in my stdout log for that job even though I can verify that the job ran successfully. Any suggestions? -- Thanks, Daniel Healy

3 2

Priority/Top seems to not be working
by Dan Healy 24 Mar '25

24 Mar '25

Hi Slurm Users, I have a newer install (23.11.3) and the priority of most all jobs is 1 and other small numbers. In previous versions, I would see numbers like 2^32. I have the multifactor plugin configured and confirmed it's in-use when I show the config. When I run `scontrol top` for a given job, the priority number doesn't change from 1. I have lots of jobs running at the moment and many queued as well. I've been using `scontrol top` for years and have seen the priority successfully change. I'm repeating this now with the newer version of Slurm and now seeing it work the same. Are you seeing this too? -- Thanks, Daniel Healy

1 0

missing jobs from queue
by Felix 14 Mar '25

14 Mar '25

Hello at site RO-14-ITIM, we have a very strange problem. A ticket was raised with the following: "Hi, The new ticket (Pilots disappearing from local batch system at ITIM) has been created by "*Timo Wilken*". Group: NGIs › NGI_RO Owner: - State: in progress Information: Hi, Pilots seem to be lost by the local batch system at ITIM. >50% of pilots fail: https://apfmon.lancs.ac.uk/CERN_central_A:RO-14-ITIM-arcn-node?state=fault Example log: https://aipanda156.cern.ch/condor_logs_2/25-03-12_13/grid.15478691.1.log Error message: "ARC job failed: LRMS error: (-1) Job missing from SLURM" Cheers, Timo" The problem is I can not find any of the jobs that are failing on the site: for example: the last job: https://aipanda023.cern.ch/condor_logs_2/25-03-14_09/grid.19602200.0.log with stdlog: 000 (19602200.000.000) 2025-03-14 09:28:03 Job submitted from host: <137.138.31.125:38090?addrs=137.138.31.125-38090+[2001-1458-d00-19--75]-38090&alias=aipanda023.cern.ch> ... 027 (19602200.000.000) 2025-03-14 09:28:13 Job submitted to grid resource GridResource: arc arcn-node.itim-cj.ro:443 GridJobId: arc arcn-node.itim-cj.ro:443 PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n ... 001 (19602200.000.000) 2025-03-14 09:40:51 Job executing on host: arc arcn-node.itim-cj.ro:443 ... 012 (19602200.000.000) 2025-03-14 09:40:58 Job was held. ARC job failed: LRMS error: (-1) Job missing from SLURM Code 0 Subcode 0 ... 009 (19602200.000.000) 2025-03-14 11:03:03 Job was aborted. Python-initiated action. (by user atlpan) ... 009 (19602200.000.000) 2025-03-14 11:03:17 Job was aborted. Python-initiated action. (by user atlpan) This name: PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n is nowhere to find on my server: [root@arcn-node log]# updatedb [root@arcn-node log]# locate PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n [root@arcn-node log]# I have on my site this kind of error The ENDPOINT affected is arcn-node.itim-cj.ro (ARC-CE)It became Critical*at*2025-03-14T09:16:44Z due to *METRIC*org.nordugrid.ARC-CE-sw-gcc *Summary:*Script exited with code 127. Could not match GCC version. See /etc/arc/nagios/20-dist.ini for debugging hints. *Message:*'' which is going to be ok in the messag, one minute later The ENDPOINT affected is arcn-node.itim-cj.ro (ARC-CE) It became Ok *at* 2025-03-14T09:17:53Z due to *METRIC* org.nordugrid.ARC-CE-sw-gcc *Summary: *Found GCC version 11.5.0. *Message: *'' Can you please advice where to look for any clue in solving this mystery? Thank you Felix :-- Dr. Eng. Farcas Felix National Institute of Research and Development of Isotopic and Molecular Technology, IT - Department - Cluj-Napoca, Romania Mobile: +40742195323

1 0

Slurm version 24.05.7 is now available
by Marshall Garey 13 Mar '25

13 Mar '25

We are pleased to announce the availability of Slurm version 24.05.7. This release fixes some stability issues in 24.05, including a crash in slurmctld after updating a reservation with an empty nodelist. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.05.7 > ========================== > -- Fix slurmctld crash when after updating a reservation with an empty > nodelist. The crash could occur after restarting slurmctld, or if > downing/draining a node in the reservation with the REPLACE or REPLACE_DOWN > flag. > -- Fix jobs being scheduled on higher weighted powered down > nodes. > -- Fix memory leak when RestrictedCoresPerGPU is enabled. > -- Prevent slurmctld deadlock in the assoc mgr.

1 0

SLURM_JOB_ACCOUNT var missing in prolog
by Jonás Arce 13 Mar '25

13 Mar '25

Hi everyone, The Slurm variable SLURM_JOB_ACCOUNT is blank in my prolog, currently i have a TaskProlog and a Prolog in my system, in TaskProlog this variable works just fine (I use TaskProlog to set env variables), but in my Prolog (which I use to create temporal directories), it's just blank, it's strange beacuse other variables such as SLURM_JOB_PARTITION, SLURM_JOB_ACCOUNT or SLURM_JOBID work just fine in both Prolog and TaskProlog, I looked into the Slurm doc and it seems that this var should work everywhere, if someone could shed some light into this or tell me another equivalent var i'd appreciate it a lot. I need it because I need to make this type of temporal directories with my Prolog: /scratch-global/$SLURM_JOB_ACCOUNT/$SLURM_JOB_USER/$SLURM_JOBID.

2 1

Job Env Vars in Slurm Core
by Bhaskar Chakraborty 13 Mar '25

13 Mar '25

Hi everyone, I have tried my best to extract custom job environment variables inside a custom select plugin.However, I am not able to get the same. I am able to get the env in a custom client filter plugin during job submission (sbatch --export) but Ineed the same in slurmctld as well. Is there any way this can be achieved. I have looked over few of the internal DS pointers (job_record, job_details etc)but none seem to provide the required functionality. Any insight is appreciated. Regards,Bhaskar.

2 1

Assistance with Node Restrictions and Priority for Users in Floating Partition
by Manisha Yadav 12 Mar '25

12 Mar '25

Dear Team, I have a scenario where I need to provide priority access to multiple users from different projects for only 3 nodes. This means that, at any given time, only 3 nodes can be used in that partition, and if one user is utilizing all 3 nodes, no other user should be able to submit jobs to that partition, or their jobs should remain in the queue. To achieve this, I attempted to use QoS by creating a floating partition with some of the nodes and configuring a QoS with priority. I also set a limit with GrpTRES=gres/gpu=24, given that each node has 8 GPUs, and there are 3 nodes in total. I then attached the QoS to the partition and assigned it to the users who need access. I Also tried MaxTRES=gres/gpu=24 While this setup works as expected in the testing environment for CPUs, it is not functioning as intended in production, and it is not effectively restricting node usage in the partition. Could anyone provide suggestions or guidance on how to properly implement node restrictions along with priority? Thank you for your assistance. Best regards, Manisha Yadav ------------------------------------------------------------------------------------------------------------ [ C-DAC is on Social-Media too. Kindly follow us at: Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ] This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. ------------------------------------------------------------------------------------------------------------

3 5

SLURM queue/partition/qos configuration
by vittorio.confuorto＠gmail.com 12 Mar '25

12 Mar '25

Hi everyone, I need some advice on properly configuring my HPC cluster, which consists of three compute nodes (each with 256 cores and 800GB of RAM). The end users belong to three distinct groups: internal, external, and collaborator. I would like the internal users to have full (and exclusive) access to the first two compute nodes. That is, by default, if they submit a job, it should be scheduled on Node1 or Node2, depending on availability (or placed in the queue if necessary). Internal users should also have access to 100 cores and 200GB of RAM on Node3, with this limit applying as a hard cap across all their jobs. The remaining 156 cores and 600GB of RAM on Node3 should be exclusively available to external and collaborator users. Specifically, I would like the following setup: - The resources on Node3 should be split as follows: - 100 cores and 400GB of RAM for external users. - 56 cores and 200GB of RAM for collaborator users. - External users should be able to use the resources dedicated to collaborator users but with lowest priority. This means an external user can submit a job requesting the resources reserved for collaborators, but the job will only start if no collaborator jobs are in the queue. Any job submitted by a collaborator—even after an external user's job—should take priority. The same rule should apply in reverse for collaborators trying to use external resources. - There should be a group/partition/queue that includes all the remaining 156 cores and 600GB of RAM on Node3. Both external and collaborator users should be able to submit jobs to this queue, but a job submitted here should only start if there are no pending jobs in the two dedicated partitions. What is the best way to implement such an architecture? Thanks, everyone, for your support!

1 0

Slurm Job Kill intimation
by Bhaskar Chakraborty 10 Mar '25

10 Mar '25

Hello All, We wish to do some cleanup when user kills a pending slurm job using scancel. Our setup has a client filter plugin which sets some internal variables while interacting to a remote process.This needs to be undone during job termination. Is there a way to do this (using submitter credentials) ? Also, if one is to use a custom select plugin is there a way to inform select that the job is terminated.Presently, we don't find that slurmctld informs select plugin when a pending job is killed. Thanks in advance for any pointers ! Regards,Bhaskar.

1 0

Slurm upgrade using Debian packages
by Matthias Leopold 10 Mar '25

10 Mar '25

Hi, I'm building Slurm Debian packages from SchedMD sources using this tutorial https://www.schedmd.com/slurm/installation-tutorial/. Now I tried upgrading (minor release upgrade within 24.05) using these packages. https://slurm.schedmd.com/upgrades.html tells me to upgrade (a) slurmdbd (b) slurmctld (c) slurmd separately in this order, stopping each service for the upgrade. How can I follow this when the Debian packages have a dependency between slurmdbd + slurmctld that upgrades both packages at the same time? thx Matthias

4 7

allowing spyder-kernels to an interactive session without pam_slurm_adopt and older version of Slurm from OpenHPC repo; parmiko?
by Robert Kudyba 06 Mar '25

06 Mar '25

So the Spyder IDE has this great feature to connect a local/laptop/workstation to a spyder-kernels session <https://docs.spyder-ide.org/current/panes/ipythonconsole.html#using-externa…>. If a user starts an interactive, e.g., srun session, they end up on a compute node which is on one of our older clusters without the pam_slurm_adopt module. Is there a way with a library like Parmiko or this slurmjob <https://github.com/daangeijs/deepops-slurmjob> package? I see for vscode an admin posted the following option <https://github.com/microsoft/vscode-remote-release/issues/1722#issuecomment…> : if [[ -v SSH_AUTH_SOCK ]]; then if [[ ${SSH_AUTH_SOCK} =~ vscode ]]; then [ -f ~/.code-tunnel-env.bash ] && source ~/.code-tunnel-env.bash fi fi Is there a way to work around the restriction of non admins to connect to the spyder-kernel session? Is there anything similar to batchspawner for Jupyterhub <https://github.com/jupyterhub/batchspawner>? Unless anyone knows of an archive for Slurm slurm-ohpc-18.08 that includes pam_adopt?

1 0

Slurm versions 24.11.3 is now available
by Marshall Garey 06 Mar '25

06 Mar '25

We are pleased to announce the availability of Slurm version 24.11.3. 24.11.3 fixes the database cluster ID generation not being random, a regression in which slurmd -G gave no output, a long-standing crash in slurmctld after updating a reservation with an empty nodelist, and some other minor to moderate bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.11.3 > ========================== > -- Fix race condition in slurmrestd that resulted in "Requested > data_parser plugin does not support OpenAPI plugin" error being returned > for valid endpoints. > -- If multiple partitions are requested, set the SLURM_JOB_PARTITION > output environment variable to the partition in which the job is running > for salloc and srun in order to match the documentation and the behavior of > sbatch. > -- Fix regression where slurmd -G gives no output. > -- Don't print misleading errors for stepmgr enabled steps. > -- slurmrestd - Avoid connection to slurmdbd for the following > endpoints: > GET /slurm/v0.0.41/jobs > GET /slurm/v0.0.41/job/{job_id} > -- slurmrestd - Avoid connection to slurmdbd for the following > endpoints: > GET /slurm/v0.0.40/jobs > GET /slurm/v0.0.40/job/{job_id} > -- Significantly increase entropy of clusterid portion of the > sluid by seeding the random number generator > -- Avoid changing process name to "watch" from original daemon name. > This could potentially breaking some monitoring scripts. > -- Avoid slurmctld being killed by SIGALRM due to race condition > at startup. > -- Fix slurmctld crash when after updating a reservation with an empty > nodelist. The crash could occur after restarting slurmctld, or if > downing/draining a node in the reservation with the REPLACE or REPLACE_DOWN > flag. > -- Fix race between task/cgroup cpuset and jobacctgather/cgroup. > The first was removing the pid from task_X cgroup directory causing > memory limits to not be applied. > -- srun - Fixed wrongly constructed SLURM_CPU_BIND env variable > that could get propagated to downward srun calls in certain mpi > environments, causing launch failures. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.40. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.41. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.42.

1 0

broken SLURM-PMIX out-of-band communication on v24.11.0 with PMIx v5
by Bertini, Denis Dr. 06 Mar '25

06 Mar '25

Hi there, Using slurm v24.11.0 together with openMPI 5.0.7 built with openpmix v5.0.6 i am facing a systematical crash at process wiring-up phase when launching standard MPI job (OSU benchmarks ) on our new AMD compute nodes ( amd-epyc 9654, 192 phys. cores +HT ) running Rocky Linux 9.4 OS The typical error reads: slurmstepd: error: mpi/pmix_v5: pmixp_p2p_send: ccexe0094 [4]: pmixp_utils.c:469: send failed, rc=1001, exceeded the retry limit slurmstepd: error: mpi/pmix_v5: _slurm_send: ccexe0094 [4]: pmixp_server.c:1581: Cannot send message to /var/spool/slurmd/stepd.slurm.pmix.656.0, size = 46979, hostlist: (null) srun: error: Node failure on ccexe0091 after such a error as you can see the node move to state down It looks like the slurmstep pmix_server can not use the local socket at var/spool/slurmd/stepd.slurm.pmix.job_id.0 for inter-node communication . * On one AMD node ( same SLURM version, same cluster setup ) wiring up works smoothly even at core satuation (192 cores used) * On Intel node (intel,xeon,gold6248r, 48 cores ) wiring-up works even with multiple node without any problem * When the problematic AMD nodes are setup as dynamic node<https://slurm.schedmd.com/dynamic_nodes.html> the wiring-up phase with multiple nodes works perfectly, without any issue Has anybody experienced this kind of problem? Any idea what could be the reason for that? I also add that when the problematic AMD nodes are setup as dynamic node<https://slurm.schedmd.com/dynamic_nodes.html> the wiring-up phase with multiple nodes works perfectly, without any issue Cheers, Denis * --------- Denis Bertini Abteilung: CIT Ort: SB3 2.265a Tel: +49 6159 71 2240 Fax: +49 6159 71 2986 E-Mail: d.bertini(a)gsi.de GSI Helmholtzzentrum für Schwerionenforschung GmbH Planckstraße 1, 64291 Darmstadt, Germany, www.gsi.de Commercial Register / Handelsregister: Amtsgericht Darmstadt, HRB 1528 Managing Directors / Geschäftsführung: Professor Dr. Paolo Giubellino, Dr. Ulrich Breuer, Jörg Blaurock Chairman of the GSI Supervisory Board / Vorsitzender des GSI-Aufsichtsrats: Ministerialdirigent Dr. Volkmar Dietz

1 0

error in logs, does it mean anything?
by Steven Jones 06 Mar '25

06 Mar '25

[2025-03-06T00:26:06.002] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:31:06.002] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:36:06.001] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:41:07.001] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port regards Steven

1 0

Re: mariadb refusing access
by Steven Jones 05 Mar '25

05 Mar '25

Yes that is set, and my settings are, # slurmDBD info DbdAddr=localhost DbdHost=vuwunicoslurmd3.ods.vuw.ac.nz #DbdHost=localhost DbdPort=6819 SlurmUser=slurm #MessageTimeout=300 DebugLevel=verbose #DefaultQOS=normal,standby LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurmdbd/slurmdbd.pid #PluginDir=/usr/lib/slurm #PrivateData=accounts,users,usage,jobs #TrackWCKey=yes # # Database info StorageType=accounting_storage/mysql #StorageHost=localhost StorageHost=localhost #StoragePort=1234 #StoragePort=3306 StoragePass=xxxxxxxx StorageUser=slurm StorageLoc=slurm_acct_db #ssj regards Steven ________________________________ From: Sarlo, Jeffrey S <JSarlo(a)Central.UH.EDU> Sent: Thursday, 6 March 2025 7:42 am To: Steven Jones <steven.jones(a)vuw.ac.nz> Subject: RE: [slurm-users] Re: mariadb refusing access You don't often get email from jsarlo(a)central.uh.edu. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Do you have the correct password listed in the slurmdbd.conf file? That was toward the bottom of the Wiki that Ole sent. Jeff From: Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com> Sent: Wednesday, March 5, 2025 12:39 PM To: slurm-users(a)lists.schedmd.com; Ole Holm Nielsen <Ole.H.Nielsen(a)fysik.dtu.dk> Subject: [slurm-users] Re: mariadb refusing access Sorry, I dont follow you, Pass word works fine and grant looks OK. [root@vuwunicoslurmd3 ~]# mysql -u slurm -p Enter password: Welcome to the MariaDB monitor. Commands end with ; or \g. Your MariaDB connection id is 208 Server version: 10.11.10-MariaDB MariaDB Server Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MariaDB [(none)]> show grants; +--------------------------------------------------------------------------------------------------------------+ | Grants for slurm@localhost | +--------------------------------------------------------------------------------------------------------------+ | GRANT USAGE ON *.* TO `slurm`@`localhost` IDENTIFIED BY PASSWORD '*2F4EEC707189D8B5E329829B9303058EF7585569' | | GRANT ALL PRIVILEGES ON `slurm_acct_db`.* TO `slurm`@`localhost` | +--------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.000 sec) MariaDB [(none)]> Isnt there something about password encryption / password hash? regards Steven ________________________________ From: Ole Holm Nielsen via slurm-users <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> Sent: Wednesday, 5 March 2025 9:25 pm To: slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> Subject: [slurm-users] Re: mariadb refusing access On 3/5/25 02:23, Steven Jones via slurm-users wrote: > In the logs I am seeing, > > root@vuwunicoslurmd3 mariadb]# tail -f mariadb.log > 2025-03-04 19:01:32 12565 [Warning] Access denied for user > 'slurm'@'localhost' (using password: YES) > 2025-03-04 19:06:19 12566 [Warning] Access denied for user > 'slurm'@'localhost' (using password: YES) > > However mysql -u slurm -p works just fine so it seems to be a config > error for slurmdbd It seems that you didn't select a suitable slurm user’s database password, see https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.fysi…<https://urldefense.com/v3/__https:/apc01.safelinks.protection.outlook.com/?…> IHTH, Ole -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com<mailto:slurm-users-leave@lists.schedmd.com>

1 1

mariadb refusing access
by Steven Jones 05 Mar '25

05 Mar '25

In the logs I am seeing, root@vuwunicoslurmd3 mariadb]# tail -f mariadb.log 2025-03-04 19:01:32 12565 [Warning] Access denied for user 'slurm'@'localhost' (using password: YES) 2025-03-04 19:06:19 12566 [Warning] Access denied for user 'slurm'@'localhost' (using password: YES) However mysql -u slurm -p works just fine so it seems to be a config error for slurmdbd Any ideas please? regards Steven

4 6

Tracking costs - variable costs per partition
by Jeffrey A Dusenberry 05 Mar '25

05 Mar '25

Hello - We're in a similar situation as was described here: https://groups.google.com/g/slurm-users/c/eBDslkwoFio where we want to track (and control) costs on a fairly heterogenous system with different billing weights per partition. The solution proposed seems like it would work rather well, except our use of fairshare seems to interfere with the billing values we would want to use to limit usage based on credits granted. We have PriorityDecayHalfLife set on our system, so that billing value (GrpTRESRaw) seems to drop with time. Is there a way to implement something similar on an otherwise fairshare-based system? Thanks, Jeff

1 0

orted errors
by Berg, Stephen P CIV USN NRL DET SSC MS (USA) 04 Mar '25

04 Mar '25

I'm running a small-ish slurm grid, 87 nodes with various hardware. On a few occasions lately users submitting jobs will get an orted error and the job fails. Try again a few hours later or the next day and the same job runs just fine. Google-fu indicated it might be a DNS issue if for whatever reason a node couldn't figure out the address for other nodes in the job. So I populated the /etc/hosts on each node with a complete listing of all the nodes so there wouldn't be any reliance on DNS. And that very afternoon another job failed with orted. So it seems at least in my case DNS isn't the issue. What's the best way to troubleshoot this when orted fails but doesn't give any sort of error to indicate what the root cause of the failure might be? And I also can't predictably induce the failure, just have to wait until it randomly chokes.

2 1

Slurm versions 24.11.2 and 24.05.6 are now available
by Marshall Garey 04 Mar '25

04 Mar '25

We are pleased to announce the availability of Slurm versions 24.11.2 and 24.05.6. 24.11.2 fixes a variety of minor to major bugs. Fixed regressions include loading non-default QOS on pending jobs from pre-24.11 state, pending jobs displaying QOS=(null) when not explicitly requesting a QOS, running jobs that requested multiple partitions potentially having an incorrect partition when slurmctld is restarted, and burst_buffer.lua failing if slurm.conf is in a non-standard location. This release also fixes a few crashes in slurmctld: crashing when a job that can preempt requests --test-only, crasing when the scheduler evaluates a job on nodes with suspended jobs, and crashing due to a long-standing bug causing a job record without job_resrcs. 24.05.6 fixes sattach with auth/slurm, a slurmrestd crash when using data_parser/v0.0.40, a slurmctld crash when using job suspension, a performance regression for RPCs with large amounts of data, and some other moderate severity bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.11.2 > ========================== > -- Fix segfault when submitting --test-only jobs that can preempt. > -- Fix regression introduced in 23.11 that prevented the following > flags from being added to a reservation on an update: > DAILY, HOURLY, WEEKLY, WEEKDAY, and WEEKEND. > -- Fix crash and issues evaluating job's suitability for running in > nodes with already suspended job(s) there. > -- Slurmctld will ensure that healthy nodes are not reported as > UnavailableNodes in job reason codes. > -- Fix handling of jobs submitted to a current reservation with > flags OVERLAP,FLEX or OVERLAP,ANY_NODES when it overlaps nodes with a > future maintenance reservation. When a job submission had a time limit that > overlapped with the future maintenance reservation, it was rejected. Now > the job is accepted but stays pending with the reason "ReqNodeNotAvail, > Reserved for maintenance". > -- pam_slurm_adopt - avoid errors when explicitly setting > some arguments to the default value. > -- Fix qos preemption with PreemptMode=SUSPEND > -- slurmdbd - When changing a user's name update lineage > at the same time. > -- Fix regression in 24.11 in which burst_buffer.lua does not > inherit the SLURM_CONF environment variable from slurmctld and fails to run > if slurm.conf is in a non-standard location. > -- Fix memory leak in slurmctld if select/linear and the > PreemptParameters=reclaim_licenses options are both set in slurm.conf. > Regression in 24.11.1. > -- Fix running jobs, that requested multiple partitions, from > potentially being set to the wrong partition on restart. > -- switch/hpe_slingshot - Fix compatibility with newer cxi > drivers, specifically when specifying disable_rdzv_get. > -- Add ABORT_ON_FATAL environment variable to capture a backtrace > from any fatal() message. > -- Fix printing invalid address in rate limiting log statement. > -- sched/backfill - Fix node state PLANNED not being cleared from > fully allocated nodes during a backfill cycle. > -- select/cons_tres - Fix future planning of jobs with bf_licenses. > -- Prevent redundant "on_data returned rc: Rate limit exceeded, > please retry momentarily" error message from being printed in > slurmctld logs. > -- Fix loading non-default QOS on pending jobs from pre-24.11 state. > -- Fix pending jobs displaying QOS=(null) when not explicitly > requesting a QOS. > -- Fix segfault issue from job record with no job_resrcs > -- Fix failing sacctmgr delete/modify/show account operations > with where clauses. > -- Fix regression in 24.11 in which Slurm daemons started catching > several SIGTSTP, SIGTTIN and SIGUSR1 signals and ignored them, while before > they were not ignoring them. This also caused slurmctld to not being > able to shutdown after a SIGTSTP because slurmscriptd caught the signal > and stopped while slurmctld ignored it. Unify and fix these situations and > get back to the previous behavior for these signals. > -- Document that SIGQUIT is no longer ignored by slurmctld, > slurmdbd, and slurmd in 24.11. As of 24.11.0rc1, SIGQUIT is identical to > SIGINT and SIGTERM for these daemons, but this change was not documented. > -- Fix not considering nodes marked for reboot without ASAP > in the scheduler. > -- Remove the boot^ state on unexpected node reboot after > return to service. > -- Do not allow new jobs to start on a node which is being rebooted > with the flag nextstate=resume. > -- Prevent lower priority job running after cancelling an ASAP reboot. > -- Fix srun jobs starting on nextstate=resume rebooting nodes. > > * Changes in Slurm 24.05.6 > ========================== > -- data_parser/v0.0.40 - Prevent a segfault in the slurmrestd when > dumping data with v0.0.40+complex data parser. > -- Fix sattach when using auth/slurm. > -- scrun - Add support '--all' argument for kill subcommand. > -- Fix performance regression while packing larger RPCs. > -- Fix crash and issues evaluating job's suitability for running in > nodes with already suspended job(s) there. > -- Fixed a job requeuing issue that merged job entries into the > same SLUID when all nodes in a job failed simultaneously. > -- switch/hpe_slingshot - Fix compatibility with newer cxi > drivers, specifically when specifying disable_rdzv_get. > -- Add ABORT_ON_FATAL environment variable to capture a backtrace > from any fatal() message.

7 6

Re: how to set slurmdbd.conf if using two slurmdb node with HA database?
by taleintervenor＠sjtu.edu.cn 27 Feb '25

27 Feb '25

Do you mean the second configuration scheme? I think configuring `dbdhost=localhost` is the same as configuring ` DbdAddr =nodeC` and ` DbdAddr =nodeD` on the two nodes respectively. The key point is whether we should set the DbdBackupHost option and how it work? 发件人: Daniel Letai <dani(a)letai.org.il> 发送时间: 2025年2月19日 18:21 收件人: slurm-users(a)lists.schedmd.com 主题: [slurm-users] Re: how to set slurmdbd.conf if using two slurmdb node with HA database? I'm not sure it will work, didn't test it, but could you just do `dbdhost=localhost` to solve this? On 18/02/2025 11:59, hermes via slurm-users wrote: The deployment scenario is as follows: nodeA nodeB (slurmctld) (backup slurmctld) | \-------------------------------/ | | / \ | nodeC nodeD (slurmdbd) (backup slurmdbd) (mysql) <--multi master replica--> (mysql) Since the database is multi-master replicated, the slurmdbd should only talk to the mysql on its own node. In such case, how should we set the slurmdbd.conf? The conf file contains options “DbdAddr”, “DbdHost” and “DbdBackupHost”. Should they be consistent between nodeA-2 and nodeB-2? Such as: DbdAddr = nodeC | DbdAddr = nodeC DbdHost = nodeC | DbdHost = nodeC DbdBackupHost = nodeD | DbdBackupHost = nodeD StorageHost = nodeC | StorageHost = nodeD Or maybe just set different conf and don’t use the “DbdBackupHost” like: DbdAddr = nodeC | DbdAddr = nodeD DbdHost = nodeC | DbdHost = nodeD StorageHost = nodeC | StorageHost = nodeD I’m quite confused about the usage of DbdAddr and DbdHost. What is the difference between them and why only DbdHost has the backup one? Another confusing point is how DbdBackupHost work. I guess It is slurmctld that is responsible for selecting the available slurmdbd. Since the slurm.conf already contains “AccountingStorageHost” and “AccountingStorageBackupHost”, why we need set backupdbd again on slurmdbd side?

4 10

Limit CPUs per job (but not per user, partition or node)
by Herbert Fruchtl 26 Feb '25

26 Feb '25

We have a cluster with multi-core nodes (168) that can be shared by multiple jobs at the same time. How do I configure a partition such that it only accepts jobs requesting up to (say) 8 cores, but will run multiple jobs at the same time? The following is apparently not working: PartitionName=debug Nodes=node01 MaxTime=02:00:00 DefMemPerCPU=1000 MaxCPUsPerNode=8 Default=NO It allows one job using 8 cores, but a second one will not start because the limit is apparently for the partition as a whole. Thanks in advance, Herbert -- Herbert Fruchtl (he/him) Senior Scientific Computing Officer / HPC Administrator School of Chemistry, IT Services University of St Andrews -- The University of St Andrews is a charity registered in Scotland: No SC013532

3 2

Re: MinTRES in QoS and power saving
by Patryk Bełzak 26 Feb '25

26 Feb '25

Hi, there was this issue raised some time ago: https://www.mail-archive.com/slurm-users@lists.schedmd.com/msg10799.html We're experiencing exactly the same issue now with GPU nodes in power saving, some (but not all) jobs doesn't start because of that, and it's annoying users - badly. Anyone experienced something similiar? Or maybe Stefan has a solution? (we're on version 24.05.5) Best regards Patryk Belzak. -- HPC Administrator Wroclaw Centre for Networking and Supercomputing

1 0

Shard conf weirdness
by Reed Dier 24 Feb '25

24 Feb '25

Hoping someone can help me pin down the weirdness I’m experiencing. There are actually two issues, I’ve run into, the root issue, and then something odd when trying to work around the root issue. v23.11.10 - Ubuntu 22.04 - slurm-smd debs built <https://slurm.schedmd.com/archive/slurm-23.11.10/quickstart_admin.html#debu…> from the tarball. I have 2 slurmctld daemons, and 1 slurmdbd daemon. The slurm.conf is consistent across the cluster, all ctld,dbd,slurmd, have the same shasum hash. The backup slurmctld does not appear to like the gres configured on my gpu nodes, despite the primary slurmctld having no issues. When failing over with scontrol takeover, I get the following log messages on the secondary slurmctld, where it complains about a reported, but not configured typed gres/shard. > [2025-02-21T05:02:02.017] error: Setting node $HOST2 state to INVAL with reason:gres/shard type (p100) reported but not configured > [2025-02-21T05:02:02.018] drain_nodes: node $HOST2 state set to DRAIN > [2025-02-21T05:02:02.018] error: _slurm_rpc_node_registration node=$HOST2: Invalid argument > [2025-02-21T05:02:02.020] error: Setting node $HOST3 state to INVAL with reason:gres/shard type (p40) reported but not configured > [2025-02-21T05:02:02.020] drain_nodes: node $HOST3 state set to DRAIN > [2025-02-21T05:02:02.020] error: _slurm_rpc_node_registration node=$HOST3: Invalid argument > [2025-02-21T05:02:02.023] error: Setting node $HOST1 state to INVAL with reason:gres/shard type (t4) reported but not configured > [2025-02-21T05:02:02.020] drain_nodes: node $HOST1 state set to DRAIN > [2025-02-21T05:02:02.023] error: _slurm_rpc_node_registration node=$HOST1: Invalid argument And looking at those hosts in the slurm.conf, the shards are not typed, but generic. > NodeName=$HOST1 [SNIP] State=UNKNOWN Gres=gpu:t4:2,shard:8 > NodeName=$HOST2 [SNIP] State=UNKNOWN Gres=gpu:p100:2,shard:8 > NodeName=$HOST3 [SNIP] State=UNKNOWN Gres=gpu:p40:2,gpu:p100:2,shard:16 I should also point out at this point that my gres.conf is just AutoDetect=nvml. I am not explicitly mapping any devices. So this is problem 1, the slurmctld behaving differently between daemons, where the primary has zero issue with the configuration, but the secondary balking and draining the nodes consistently. Moving on to problem 2, which is me trying to solve the issue, and running into a different issue. I decided to try to add the typed gres/shards to both the AccountingStorageTRES, and the NodeName lists. > NodeName=$HOST1 [SNIP] State=UNKNOWN Gres=gpu:t4:2,shard:t4:8 > NodeName=$HOST2 [SNIP] State=UNKNOWN Gres=gpu:p100:2,shard:p100:8 > NodeName=$HOST3 [SNIP] State=UNKNOWN Gres=gpu:p40:2,gpu:p100:2,shard:p40:8,shard:p100:8 Now the secondary slurmctld is happy and no longer immediately drains the gpu nodes for the invalid gres. However, the node ($HOST3) with a mixed set of gpus is now complaining. > [2025-02-23T21:41:05.311] gpu/nvml: _get_system_gpu_list_nvml: 4 GPU system device(s) detected > [2025-02-23T21:41:05.311] fatal: _build_shared_list: bad configuration, multiple configurations without "File" No matter what I tried, any line of the NodeName with multiple shard:$type:$num generates the _build_shared_list error above. I tried re-ordering the list as gpu,shard,gpu,shard to no avail, I tried having untyped shards, with typed shards after that, but then it complained about too many shards (double the intended number, $untyped + $typed = too many) So my current solution is to have the slurm conf in sync everywhere BUT the host(s) with multiple gpu models in the same host, where I had to revert to untyped gres on those slurmd’s, but on the slurmctlds they are typed gres. Hopefully I’ve done a decent job of explaining the corner case, enough that someone can point me in the direction of figuring out whats going on, and what is the “correct” way of doing this. I tried increasing the slurmd and slurmctld logging to debug2, to nothing that stood out beyond what was already gathered. > [2025-02-23T21:46:44.895] debug: GRES[shard] Type:p100 Count:8 Cores(88):(null) Links:(null) Flags:HAS_TYPE File:(null) UniqueId:(null) > [2025-02-23T21:46:44.895] debug: GRES[shard] Type:p40 Count:8 Cores(88):(null) Links:(null) Flags:HAS_TYPE File:(null) UniqueId:(null) > [2025-02-23T21:46:44.895] fatal: _build_shared_list: bad configuration, multiple configurations without "File" Any ideas are greatly appreciated, Reed

1 0

Plese help [CPUs=24 Boards=1 SocketsPerBoard=1 CoresPerSocket=16 ThreadsPerCore=1]
by Hugo Solís 24 Feb '25

24 Feb '25

I am installing slurm on a small cluster of 3 identical computers at the university. It turns out that I get the message when starting: error: NodeNames=hugo-big-1 CPUs=24 match no Sockets, Sockets*CoresPerSocket or Sockets*CoresPerSocket*ThreadsPerCore. Resetting CPUs. error: NodeNames=hugo-big-2 CPUs=24 match no Sockets, Sockets*CoresPerSocket or Sockets*CoresPerSocket*ThreadsPerCore. Resetting CPUs. error: NodeNames=hugo-big-3 CPUs=24 match no Sockets, Sockets*CoresPerSocket or Sockets*CoresPerSocket*ThreadsPerCore. Resetting CPUs. if I run sudo slurmd -C I get NodeName=hugo-big-1 CPUs=24 Boards=1 SocketsPerBoard=1 CoresPerSocket=16 ThreadsPerCore=1 RealMemory=128586 reading many post it seems there is a bug starting in version 18. However I had modify the slurm.conf file NodeName=hugo-big-1 CPUs=24 Boards=1 SocketsPerBoard=1 CoresPerSocket=16 ThreadsPerCore=1 RealMemory=128586 Gres=gpu:nvidia_geforce_rtx_3090:2 to several different version where I do not specify CPUs or sockets and I failed everytime. I do need help, any idea? warm regards Hugo Solis BTW. if I run lscpu I got that any product of Thread, cores or sockets do not result in 24. Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 46 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 24 On-line CPU(s) list: 0-23 Vendor ID: GenuineIntel Model name: 12th Gen Intel(R) Core(TM) i9-12900K CPU family: 6 Model: 151 Thread(s) per core: 2 Core(s) per socket: 16 Socket(s): 1 Stepping: 2 CPU max MHz: 5200.0000 CPU min MHz: 800.0000 BogoMIPS: 6374.40 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_ti mer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault cat_l2 cdp_l2 ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdt_a rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves split_lock_detect user_shstk avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_e pp hwp_pkg_req hfi vnmi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities Virtualization features: Virtualization: VT-x Caches (sum of all): L1d: 640 KiB (16 instances) L1i: 768 KiB (16 instances) L2: 14 MiB (10 instances) L3: 30 MiB (1 instance) NUMA: NUMA node(s): 1 NUMA node0 CPU(s): 0-23

2 2

Please help - Building Slurm-24.11.1 Failed
by Zhang, Yuan 23 Feb '25

23 Feb '25

Hello, I got errors about missing perl modules when building slurm24.11.1 rpm packages. Has anyone seen this error before? And how to fix it? Here are the error messages: -- Processing files: slurm-perlapi-24.11.1-1.el8.x86_64 error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Bitstr.pm error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Constant.pm error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Hostlist.pm error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurm/Slurm.so error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurmdb/Slurmdb.so error: File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurmdb/autosplit.ix RPM build errors: Macro expanded in comment on line 31: %_prefix path install path for commands, libraries, etc. Macro expanded in comment on line 240: %define _unpackaged_files_terminate_build 0 File listed twice: /usr/lib/.build-id/49/9394dac8b96530e1a29d0e35608ef9acedec70 File listed twice: /usr/lib/.build-id/88/4e3a854911920ae0c77c4b32d5af70dad538a9 File listed twice: /usr/lib/.build-id/c1/72dbf51fe1c17868a4e0dbf0aa55a7923f6d02 File listed twice: /usr/lib/.build-id/dc/67c93438d36986971444d218350d27b413c2cb File listed twice: /usr/lib/.build-id/ee/e79f70a62bf62e74705a75daa87d26857452ef Deprecated external dependency generator is used! File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Bitstr.pm File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Constant.pm File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/Slurm/Hostlist.pm File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurm/Slurm.so File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurmdb/Slurmdb.so File not found: /home/gdhpcgroup/yxz006/rpmbuild/BUILDROOT/slurm-24.11.1-1.el8.x86_64/usr/lib64/perl5/auto/Slurmdb/autosplit.ix -- Thanks! Yuan -- Yuan Zhang Senior HPC System Programmer Nationwide Children’s Hospital Research Institute Columbus, Ohio 43215

3 5

Running SLURM in a laptop
by Antonio Rius 19 Feb '25

19 Feb '25

For testing purposes I am using SLURM installed in a lenovo laptop running ubuntu 24-04. I am trying this configuration as part of my slurm learning process before using a real HPC facility. In my trial I want to submit an array of 9 independent processes. The CPU information of such machine is: Total Logical CPUs: 16 Physical Cores: 12 Threads per Core: 2 ================================= and the slurm script (attached) that I am using contain the sentences : #SBATCH --job-name=process_pkl #SBATCH --array=1-9 #SBATCH --output=/tmp/process_pkl_%A_%a.out #SBATCH --error=/tmp/process_pkl_%A_%a.err #SBATCH --ntasks=1 #SBATCH --cpus-per-task=1 #SBATCH --mem=2G =================================== but in practice, using htop, only 4 processes are running concurrently, and there are other 12 CPUs without activity. My question is: What am I missing in my setup?

4 3

slurmrestd health check
by Hagdorn, Magnus Karl Moritz 19 Feb '25

19 Feb '25

Hi there, we use haproxy to distribute SLURM REST API requests to multiple instances of slurmrestd. For the haproxy we need a health check. At the moment we are just checking that we get a 401 status. This works but we are ending up with a lot of noise in the log files. It would be very nice if there was an unauthenticated REST API endpoint that can be used to check the daemon is up. Has anybody solved this issue? Refards magnus -- Dr. Magnus Hagdorn Charité – Universitätsmedizin Berlin Geschäftsbereich IT | Scientific Computing

1 0

/etc/passwd sync?
by mark.w.moorcroft＠ama-inc.com 19 Feb '25

19 Feb '25

If you set up slurm elastic cloud in EC2 without LDAP, what is the recommended method for sync of the passwd/group files? Is this necessary to get openmpi jobs to run. I would swear I had this working last week without synced passwd on two nodes. But thinking about it now I'm not sure how this could have worked. My home directories are in an NFS mount, but the user accounts don't exist on the node AMI. I'm using ansible/packer to manage the AMI's. When I ran OpenHPC / Slurm on bare metal there was a sync process. This is my first AWS Slurm cluster rodeo. I can't use the Amazon Parallel Computing tools because we are forced to be in GovCloud. I started with "ClusterInTheCloud", but it's all 4 years old, and semi-broken out of the box. My manager had me ditch a lot of it (including LDAP). So I'm building out a fork that is getting heavily modded for our situation. An ORTE daemon has unexpectedly failed after launch and before communicating back to mpirun. This could be caused by a number of factors, including an inability to create a connection back to mpirun due to a lack of common network interfaces and/or no route found between them. Please check network connectivity

4 4

how to set slurmdbd.conf if using two slurmdb node with HA database?
by taleintervenor＠sjtu.edu.cn 19 Feb '25

19 Feb '25

The deployment scenario is as follows: nodeA nodeB (slurmctld) (backup slurmctld) | \-------------------------------/ | | / \ | nodeC nodeD (slurmdbd) (backup slurmdbd) (mysql) <--multi master replica--> (mysql) Since the database is multi-master replicated, the slurmdbd should only talk to the mysql on its own node. In such case, how should we set the slurmdbd.conf? The conf file contains options "DbdAddr", "DbdHost" and "DbdBackupHost". Should they be consistent between nodeA-2 and nodeB-2? Such as: DbdAddr = nodeC | DbdAddr = nodeC DbdHost = nodeC | DbdHost = nodeC DbdBackupHost = nodeD | DbdBackupHost = nodeD StorageHost = nodeC | StorageHost = nodeD Or maybe just set different conf and don't use the "DbdBackupHost" like: DbdAddr = nodeC | DbdAddr = nodeD DbdHost = nodeC | DbdHost = nodeD StorageHost = nodeC | StorageHost = nodeD I'm quite confused about the usage of DbdAddr and DbdHost. What is the difference between them and why only DbdHost has the backup one? Another confusing point is how DbdBackupHost work. I guess It is slurmctld that is responsible for selecting the available slurmdbd. Since the slurm.conf already contains "AccountingStorageHost" and "AccountingStorageBackupHost", why we need set backupdbd again on slurmdbd side?

2 1

Run only one time on a node
by John Hearns 19 Feb '25

19 Feb '25

I am running single node tests on a cluster. I can select named nodes using the -2 flag with sbatch. However - if I want to submit perhaps 20 test jobs is there any smart way to run only one time on a node? I know I could touch a file with the hostname and test for that file. I am just wondering if there is a smarter way to do this.\ I should point out that the tests take a few minutes to run, so if a node finishes a test run it could become idle and run the tests again.

3 2

Create filenames based on slurm hosts
by John Hearns 15 Feb '25

15 Feb '25

I am working on power logging of a GPU cluster I am working with. I am running jobs on multiple hosts. I wanst to create a file , one for each host, which has a unique filename containing the host name. Something like clush -w $SLURM_JOB_NODELIST "touch file$(hostname)" My foo is weak today. Help me Ole Wan Neilsen or any $Jedi

3 3

avoid using same GPU by the interactive job
by navin srivastava 13 Feb '25

13 Feb '25

hi, facing an issue in my environment where the batch job and the interactive job use the same gpu. Each server has 2 gpu. When 2 batch jobs are running it works fine and use the 2 different gpu's. but if one batch job is running and another job is submitted interactively then it uses the same GPU . Is there a way to avoid this? GresTypes=gpu NodeName=node[01-02] NodeAddr=node[01-02] CPUs=48 Boards=1 SocketsPerBoard=2 CoresPerSocket=24 ThreadsPerCore=1 TmpDisk=6000000 RealMemory=515634 Feature=A100 Gres=gpu:2 PartitionName=onprem Nodes=node[01-10] Default=YES MaxTime=21-00:00:00 DefaultTime=3-00:00:00 State=UP Shared=YES OverSubscribe=NO gres.conf: Name=gpu File=/dev/nvidia0 Name=gpu File=/dev/nvidia1 Any suggestions on this. Regards Navin

3 3

error no error
by Ricardo Román-Brenes 13 Feb '25

13 Feb '25

Hello. Could someone enlighten me as to what this error message is? Feb 13 10:02:00 gpu1 slurmd[573705]: slurmd: error: slurm_msg_sendto: address:port=192.168.9.1:36698 msg_type=8001: No error

1 0

Re: /etc/passwd sync?
by Mark W. Moorcroft 13 Feb '25

13 Feb '25

I made some progress without need for the /etc/passwd sync. Sbatch is working fine on multi-node jobs it appears. Now only salloc runs fail, which I guess is expected behavior without user account sync and ssh key setup. On bare metal OpenHPC, warewulf handles all that for me. So presumably I have MPI keys, but not user account sync and keys. Again, on OpenHPC they populated keys on account creation, and passwd was synced to the boot image. Can anyone tell me what this is about? slurmctld[46449]: slurmctld: error: failed to generate json for resume job/node list Mark Moorcroft Senior Linux Administrator Analytical Mechanics Associates

1 0

Re: /etc/passwd sync?
by Mark W. Moorcroft 12 Feb '25

12 Feb '25

The only service found in gov cloud with a search for “parallel” is Batch. And the awscli commands are absent there as well. In commercial cloud “parallel” yields many services. Mark Moorcroft Senior Linux Administrator Analytical Mechanics Associates e. mark.w.moorcroft(a)ama-inc.com<mailto:mark.w.moorcroft@ama-inc.com> w. ama-inc.com<https://ama-inc.com/> t. +1 408-290-5455 _____________________________________ Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

2 1

Force a refresh for sreport
by Jackson, Gary L. 10 Feb '25

10 Feb '25

As I understand it, slurmdbd will compile statistics for sreport once an hour. Is there any way I can force that to happen immediately? Restarting slurmdbd doesn’t seem to do anything. I don’t want to use this for anything operational. Just testing. -- Gary

1 0

jobs getting stuck in CG
by Ricardo Román-Brenes 10 Feb '25

10 Feb '25

Hello everyone. I have a cluster composed of 16 nodes, with 4 of them having GPUs with no particular configuration to manage them. The filesystem is gluster, authentication via slapd/munge. My problem is that very frequently, let's say at least a job daily, gets stuck in CG. I have no idea why this happens. Manually killing the slurmstep process releases the node but this is in no way a manageable solution. Has anyone experienced this (and fixed it?) Thank you. -Ricardo

4 5

MemSpecLimit Error
by Chase Schuette 07 Feb '25

07 Feb '25

After a Bright Computing/Base Command update. I'm encountering a slurm.conf error as seen below. I tried removing the MemSpecLimit parameter from the node names but the changes don't seem to be taking affect. Even after restarting slurmd across compute nodes and restarting slurmctld on the head node. I'm also suspicious of the RealMemory being set to zero. Any insight? Open to suggestions. Thanks ahead of time! sbatch: error: NodeNames=ch3lahpccn[001-032] MemSpecLimit=0 is invalid, reset to 0 sbatch: error: NodeNames=ch3lahpcgpu1 MemSpecLimit=0 is invalid, reset to 0 sbatch: error: Memory specification can not be satisfied sbatch: error: Batch job submission failed: Requested node configuration is not available Caterpillar: Confidential Green

2 1

Issue running slurm commands as normal account but work as root.
by Kent L. Hanson 05 Feb '25

05 Feb '25

Hello all! I have an odd question. On my headnode, also my login nodes, I can ping my outside network and inside network using any DNS name I choose. It is dual homed. When I run squeue, sinfo, or any slurm command as my regular account I get the below error. I can run srun, squeue, sinfo, or any slurm command and it works as expected. Does anyone know what is going on? I feel like this is a permissions issue on something. On the compute nodes I have no problem running slurm commands as my regular account or root. Everything works well on my compute nodes. Error: [user.name@headnode ~]$ squeue squeue: error: resolve_ctls_from_dns_srv: res_nsearch error: Hostname lookup failure squeue: error: fetch_config: DNS SRV lookup failed squeue: error: _establish_config_source: failed to fetch config squeue: fatal: Could not establish a configuration source Thanks! Kent Hanson

2 2

Submit multiple jobs odd info on squeue
by Vitorio Cargnini 04 Feb '25

04 Feb '25

Hi, I submit 2 or more jobs to test the scheduler and how it is handling multiple job requests and overall info. Now I submit two or more jobs I get the following odd output: [vitorio@dev35 verif_dev]$ squeue JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 2 sim run.sh vitorio PD 0:00 1 (InvalidAccount) 1 sim run.sh vitorio R 15:35 1 dev35 [vitorio@dev35 verif_dev]$ ^C What about this InvalidAccount ?? All subsequent jobs show up like that Regards, Vitorio

1 0

RHEL8.10 V slurmctld
by Steven Jones 04 Feb '25

04 Feb '25

I am using Redhat's IdM/IPA for users Slurmctld is failing to run jobs and it is getting "invalid user id". "2025-01-28T21:48:50.271] sched: Allocate JobId=4 NodeList=node4 #CPUs=1 Partition=debug [2025-01-28T21:48:50.280] Killing non-startable batch JobId=4: Invalid user id" id on the slurm controller works fine. [xxxjoness@xxx.ac.nz@hpcunidrslurmd2 ~]$ id xxxjoness(a)xxx.ac.nz uid=1204805830(xxxjoness(a)xxx.ac.nz) gid=1204805830(xxxjoness(a)xxx.ac.nz) groups=1204805830(xxxjoness(a)xxx.ac.nz) 8><--- Any ideas please? because I am out..... I have tried RHEL9.5, this seemed to run but srun is version 22 and on rocky8 it is version20 so fails. regards Steven

8 24

System limits propagation
by Fatih Ertinaz 31 Jan '25

31 Jan '25

Hi everyone, I saw similar discussions in the archives, however I could not see a clear explanation therefore decided to open up a new thread. The problem I have is that default ulimits defined in the compute node OS image are overridden by Slurm and somehow changes in slurm.conf does not resolve the problem. This is specifically about max memory size, but the same issue applies to stack size and user processes as well. From the head node or from one of the compute nodes if I bypass slurm: max memory size (kbytes, -m) unlimited But going through salloc / sbatch it becomes: max memory size (kbytes, -m) 1024 As an initial attempt I tried setting `PropagateResourceLimitsExcept=NONE` but it didn't help. Then I tried `PropagateResourceLimits=ALL` also with no luck. So in theory PropagateResourceLimits should propagate all limits, but I'm not sure if that's really the case. I'm open to suggestions, Fatih Ertinaz Note: Slurm version is 24.05.1 OS is SLES SP5

2 1

Issues starting the SLURMCTLD on Rocky
by Vitorio Cargnini 31 Jan '25

31 Jan '25

Hello, I just deployed the latest SLURM and I am getting some odd issues restating it. Anyone saw this before, how can I fix it? Jan 30 17:22:09 slurmctrl01 systemd[1]: slurmctld.service: Main process exited, code=dumped, status=6/ABRT Jan 30 17:22:09 slurmctrl01 systemd[1]: slurmctld.service: Failed with result 'core-dump'. Jan 30 17:22:09 slurmctrl01 systemd[1]: Failed to start Slurm controller daemon. Jan 30 17:22:09 slurmctrl01 systemd[1]: systemd-coredump(a)8-92126-0.service: Succeeded. journalctl -xe #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92119: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92112: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92122: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92111: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92115: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92123: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) Stack trace of thread 92104: #0 0x00007f8954cf347c pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0) #1 0x00007f89550c2cb5 _wait (libslurmfull.so) #2 0x00007f89550cc5cf _worker (libslurmfull.so) #3 0x00007f8954ced1ca start_thread (libpthread.so.0) #4 0x00007f8953fa28d3 __clone (libc.so.6) -- Subject: Process 92054 (slurmctld) dumped core -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: man:core(5) -- -- Process 92054 (slurmctld) crashed and dumped core. -- -- This usually indicates a programming error in the crashing program and -- should be reported to its vendor as a bug. Jan 30 17:22:09 slurmctrl01.internal.samsung systemd[1]: slurmctld.service: Main process exited, code=dumped, status=6/ABRT Jan 30 17:22:09 slurmctrl01.internal.samsung systemd[1]: slurmctld.service: Failed with result 'core-dump'. -- Subject: Unit failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- The unit slurmctld.service has entered the 'failed' state with result 'core-dump'. Jan 30 17:22:09 slurmctrl01.internal.samsung systemd[1]: Failed to start Slurm controller daemon. -- Subject: Unit slurmctld.service has failed -- Defined-By: systemd Regards, Vitorio

2 1

Re: RHEL8.10 V slurmctld
by Steven Jones 30 Jan '25

30 Jan '25

Hi, Already done as part of the build process. regards Steven ________________________________ From: Williams, Jenny Avis <jenny_williams(a)unc.edu> Sent: Friday, 31 January 2025 9:06 am To: Steven Jones <steven.jones(a)vuw.ac.nz>; John Hearns <hearnsj(a)gmail.com> Cc: slurm-users(a)schedmd.com <slurm-users(a)schedmd.com> Subject: RE: [slurm-users] Re: RHEL8.10 V slurmctld You don't often get email from jenny_williams(a)unc.edu. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> First I’d verify munge functionality in the updated environment – https://github.com/dun/munge/wiki/Installation-Guide#troubleshooting From: Steven Jones <steven.jones(a)vuw.ac.nz> Sent: Thursday, January 30, 2025 2:55 PM To: Williams, Jenny Avis <jenny_williams(a)unc.edu>; John Hearns <hearnsj(a)gmail.com> Cc: slurm-users(a)schedmd.com Subject: Re: [slurm-users] Re: RHEL8.10 V slurmctld Hi, Hmmm, yes I am using munge. [root@node1 ~]# strings `which slurmd` |egrep -i munge [root@node1 ~]# Does not return anything on the nodes, but worked fine for RHEL9.5 [root@xxxunidrslurmd2 munge]# scontrol show config |egrep -i auth AuthAltTypes = (null) AuthAltParameters = (null) AuthInfo = (null) AuthType = auth/munge [root@vuwunidrslurmd2 munge]# Munge logs are 0 length ============= slurmd2 slurm]# rpm -qi munge Name : munge Version : 0.5.13 Release : 2.el8 Architecture: x86_64 Install Date: Wed 15 Jan 2025 02:11:46 AM UTC Group : Unspecified Size : 320124 License : GPLv3+ and LGPLv3+ Signature : RSA/SHA256, Mon 27 Apr 2020 11:43:24 PM UTC, Key ID 199e2f91fd431d51 Source RPM : munge-0.5.13-2.el8.src.rpm Build Date : Fri 24 Apr 2020 07:37:08 AM UTC Build Host : x86-vm-02.build.eng.bos.redhat.com Relocations : (not relocatable) Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla> Vendor : Red Hat, Inc. URL : https://dun.github.io/munge/ Summary : Enables uid & gid authentication across a host cluster Description : MUNGE (MUNGE Uid 'N' Gid Emporium) is an authentication service for creating and validating credentials. It is designed to be highly scalable for use in an HPC cluster environment. It allows a process to authenticate the UID and GID of another local or remote process within a group of hosts having common users and groups. These hosts form a security realm that is defined by a shared cryptographic key. Clients within this security realm can create and validate credentials without the use of root privileges, reserved ports, or platform-specific methods. ========== [root@node1 ~]# rpm -qi munge Name : munge Version : 0.5.13 Release : 2.el8 Architecture: x86_64 Install Date: Sun Jan 26 22:14:28 2025 Group : Unspecified Size : 319876 License : GPLv3+ and LGPLv3+ Signature : RSA/SHA256, Mon Apr 12 06:46:59 2021, Key ID 15af5dac6d745a60 Source RPM : munge-0.5.13-2.el8.src.rpm Build Date : Mon Apr 12 05:07:29 2021 Build Host : ord1-prod-x86build003.svc.aws.rockylinux.org Relocations : (not relocatable) Packager : infrastructure(a)rockylinux.org<mailto:infrastructure@rockylinux.org> Vendor : Rocky URL : https://dun.github.io/munge/ Summary : Enables uid & gid authentication across a host cluster Description : MUNGE (MUNGE Uid 'N' Gid Emporium) is an authentication service for creating and validating credentials. It is designed to be highly scalable for use in an HPC cluster environment. It allows a process to authenticate the UID and GID of another local or remote process within a group of hosts having common users and groups. These hosts form a security realm that is defined by a shared cryptographic key. Clients within this security realm can create and validate credentials without the use of root privileges, reserved ports, or platform-specific methods. [root@node1 ~]# ========== [root@node1 ~]# rpm -qi slurm-slurmd Name : slurm-slurmd Version : 20.11.9 Release : 1.el8 Architecture: x86_64 Install Date: Sun Jan 26 22:15:34 2025 Group : Unspecified Size : 517922 License : GPLv2 and BSD Signature : RSA/SHA256, Fri May 6 00:03:49 2022, Key ID 21ea45ab2f86d6a1 Source RPM : slurm-20.11.9-1.el8.src.rpm Build Date : Thu May 5 23:33:30 2022 Build Host : buildvm-x86-18.iad2.fedoraproject.org Relocations : (not relocatable) Packager : Fedora Project Vendor : Fedora Project URL : https://slurm.schedmd.com/ Bug URL : https://bugz.fedoraproject.org/slurm Summary : Slurm compute node daemon Description : Slurm compute node daemon. Used to launch jobs on compute nodes [root@node1 ~]# ======= slurmd2 ~]# rpm -qi slurm-slurmctld Name : slurm-slurmctld Version : 20.11.9 Release : 1.el8 Architecture: x86_64 Install Date: Wed 15 Jan 2025 02:11:48 AM UTC Group : Unspecified Size : 1097306 License : GPLv2 and BSD Signature : RSA/SHA256, Fri 06 May 2022 12:03:49 AM UTC, Key ID 21ea45ab2f86d6a1 Source RPM : slurm-20.11.9-1.el8.src.rpm Build Date : Thu 05 May 2022 11:33:30 PM UTC Build Host : buildvm-x86-18.iad2.fedoraproject.org Relocations : (not relocatable) Packager : Fedora Project Vendor : Fedora Project URL : https://slurm.schedmd.com/ Bug URL : https://bugz.fedoraproject.org/slurm Summary : Slurm controller daemon Description : Slurm controller daemon. Used to manage the job queue, schedule jobs, and dispatch RPC messages to the slurmd processon the compute nodes to launch jobs. regards Steven ________________________________ From: Williams, Jenny Avis <jenny_williams(a)unc.edu<mailto:jenny_williams@unc.edu>> Sent: Friday, 31 January 2025 8:36 am To: Steven Jones <steven.jones(a)vuw.ac.nz<mailto:steven.jones@vuw.ac.nz>>; John Hearns <hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>> Cc: slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com> <slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com>> Subject: RE: [slurm-users] Re: RHEL8.10 V slurmctld You don't often get email from jenny_williams(a)unc.edu<mailto:jenny_williams@unc.edu>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> On both a compute node and the controller rpm -qi slurm-slurmctld rpm -qi slurm-slurmd check what the auth type is – for example, we still use munge, which in my compile is also the default auth type. : # strings `which slurmd` |egrep -i munge DEFAULT_AUTH_TYPE "auth/munge" DEFAULT_CRED_TYPE "cred/munge" #scontrol show config |egrep -i auth AuthAltTypes = (null) AuthAltParameters = (null) AuthInfo = (null) AuthType = auth/munge From: Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> Sent: Thursday, January 30, 2025 2:07 PM To: John Hearns <hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>> Cc: slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com> Subject: [slurm-users] Re: RHEL8.10 V slurmctld Hi, Yes, even ssh works OK. [root@xxxunicobuildt1 warewulf]# ssh xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1> (xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1>) Password: Last login: Wed Jan 29 01:26:21 2025 from 130.195.87.12 [xxxjonesst@xxx.ac.nz@node1 ~]$ xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1> ~]$ whoami | id uid=1204805830(xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz>) gid=1204805830(xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz>) tail -f /var/log/secure ========= Jan 30 18:19:56 node1 sshd[15443]: pam_sss(sshd:auth): authentication success; logname= uid=0 euid=0 tty=ssh ruser= rhost=130.195.87.12 user=xxxjonesst(a)xxx.ac.nz<mailto:user=xxxjonesst@xxx.ac.nz> Jan 30 18:19:56 node1 sshd[15440]: Accepted keyboard-interactive/pam for xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz> from 130.195.87.12 port 59402 ssh2 Would there be any relevant changes between RHEL8's slurm and RHEL9's slurm? [root@node1 ~]# rpm -qa |grep slurm slurm-libs-20.11.9-1.el8.x86_64 slurm-slurmd-20.11.9-1.el8.x86_64 slurm-20.11.9-1.el8.x86_64 [root@node1 ~]# I would have to go back and check but I do not think I hit this on RHEL9 what I did get was srun ver22 on the RHEL9 server didnt like srun ver20 on the rocky8 node. Can I compile / rpm build srun ver22 to run on rocky8? or is that part of slurmd? regards Steven ________________________________ From: John Hearns <hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>> Sent: Thursday, 30 January 2025 10:53 pm To: Steven Jones <steven.jones(a)vuw.ac.nz<mailto:steven.jones@vuw.ac.nz>> Cc: slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com> <slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com>> Subject: Re: [slurm-users] RHEL8.10 V slurmctld You don't often get email from hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Have you run id on a computer node? On Wed, Jan 29, 2025, 6:47 PM Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> wrote: I am using Redhat's IdM/IPA for users Slurmctld is failing to run jobs and it is getting "invalid user id". "2025-01-28T21:48:50.271] sched: Allocate JobId=4 NodeList=node4 #CPUs=1 Partition=debug [2025-01-28T21:48:50.280] Killing non-startable batch JobId=4: Invalid user id" id on the slurm controller works fine. [xxxjoness@xxx.ac.nz@hpcunidrslurmd2 ~]$ id xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz> uid=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) gid=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) groups=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) 8><--- Any ideas please? because I am out..... I have tried RHEL9.5, this seemed to run but srun is version 22 and on rocky8 it is version20 so fails. regards Steven -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com<mailto:slurm-users-leave@lists.schedmd.com>

1 0

Re: RHEL8.10 V slurmctld
by Steven Jones 30 Jan '25

30 Jan '25

Hi, Hmmm, yes I am using munge. [root@node1 ~]# strings `which slurmd` |egrep -i munge [root@node1 ~]# Does not return anything on the nodes, but worked fine for RHEL9.5 [root@xxxunidrslurmd2 munge]# scontrol show config |egrep -i auth AuthAltTypes = (null) AuthAltParameters = (null) AuthInfo = (null) AuthType = auth/munge [root@vuwunidrslurmd2 munge]# Munge logs are 0 length ============= slurmd2 slurm]# rpm -qi munge Name : munge Version : 0.5.13 Release : 2.el8 Architecture: x86_64 Install Date: Wed 15 Jan 2025 02:11:46 AM UTC Group : Unspecified Size : 320124 License : GPLv3+ and LGPLv3+ Signature : RSA/SHA256, Mon 27 Apr 2020 11:43:24 PM UTC, Key ID 199e2f91fd431d51 Source RPM : munge-0.5.13-2.el8.src.rpm Build Date : Fri 24 Apr 2020 07:37:08 AM UTC Build Host : x86-vm-02.build.eng.bos.redhat.com Relocations : (not relocatable) Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla> Vendor : Red Hat, Inc. URL : https://dun.github.io/munge/ Summary : Enables uid & gid authentication across a host cluster Description : MUNGE (MUNGE Uid 'N' Gid Emporium) is an authentication service for creating and validating credentials. It is designed to be highly scalable for use in an HPC cluster environment. It allows a process to authenticate the UID and GID of another local or remote process within a group of hosts having common users and groups. These hosts form a security realm that is defined by a shared cryptographic key. Clients within this security realm can create and validate credentials without the use of root privileges, reserved ports, or platform-specific methods. ========== [root@node1 ~]# rpm -qi munge Name : munge Version : 0.5.13 Release : 2.el8 Architecture: x86_64 Install Date: Sun Jan 26 22:14:28 2025 Group : Unspecified Size : 319876 License : GPLv3+ and LGPLv3+ Signature : RSA/SHA256, Mon Apr 12 06:46:59 2021, Key ID 15af5dac6d745a60 Source RPM : munge-0.5.13-2.el8.src.rpm Build Date : Mon Apr 12 05:07:29 2021 Build Host : ord1-prod-x86build003.svc.aws.rockylinux.org Relocations : (not relocatable) Packager : infrastructure(a)rockylinux.org Vendor : Rocky URL : https://dun.github.io/munge/ Summary : Enables uid & gid authentication across a host cluster Description : MUNGE (MUNGE Uid 'N' Gid Emporium) is an authentication service for creating and validating credentials. It is designed to be highly scalable for use in an HPC cluster environment. It allows a process to authenticate the UID and GID of another local or remote process within a group of hosts having common users and groups. These hosts form a security realm that is defined by a shared cryptographic key. Clients within this security realm can create and validate credentials without the use of root privileges, reserved ports, or platform-specific methods. [root@node1 ~]# ========== [root@node1 ~]# rpm -qi slurm-slurmd Name : slurm-slurmd Version : 20.11.9 Release : 1.el8 Architecture: x86_64 Install Date: Sun Jan 26 22:15:34 2025 Group : Unspecified Size : 517922 License : GPLv2 and BSD Signature : RSA/SHA256, Fri May 6 00:03:49 2022, Key ID 21ea45ab2f86d6a1 Source RPM : slurm-20.11.9-1.el8.src.rpm Build Date : Thu May 5 23:33:30 2022 Build Host : buildvm-x86-18.iad2.fedoraproject.org Relocations : (not relocatable) Packager : Fedora Project Vendor : Fedora Project URL : https://slurm.schedmd.com/ Bug URL : https://bugz.fedoraproject.org/slurm Summary : Slurm compute node daemon Description : Slurm compute node daemon. Used to launch jobs on compute nodes [root@node1 ~]# ======= slurmd2 ~]# rpm -qi slurm-slurmctld Name : slurm-slurmctld Version : 20.11.9 Release : 1.el8 Architecture: x86_64 Install Date: Wed 15 Jan 2025 02:11:48 AM UTC Group : Unspecified Size : 1097306 License : GPLv2 and BSD Signature : RSA/SHA256, Fri 06 May 2022 12:03:49 AM UTC, Key ID 21ea45ab2f86d6a1 Source RPM : slurm-20.11.9-1.el8.src.rpm Build Date : Thu 05 May 2022 11:33:30 PM UTC Build Host : buildvm-x86-18.iad2.fedoraproject.org Relocations : (not relocatable) Packager : Fedora Project Vendor : Fedora Project URL : https://slurm.schedmd.com/ Bug URL : https://bugz.fedoraproject.org/slurm Summary : Slurm controller daemon Description : Slurm controller daemon. Used to manage the job queue, schedule jobs, and dispatch RPC messages to the slurmd processon the compute nodes to launch jobs. regards Steven ________________________________ From: Williams, Jenny Avis <jenny_williams(a)unc.edu> Sent: Friday, 31 January 2025 8:36 am To: Steven Jones <steven.jones(a)vuw.ac.nz>; John Hearns <hearnsj(a)gmail.com> Cc: slurm-users(a)schedmd.com <slurm-users(a)schedmd.com> Subject: RE: [slurm-users] Re: RHEL8.10 V slurmctld You don't often get email from jenny_williams(a)unc.edu. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> On both a compute node and the controller rpm -qi slurm-slurmctld rpm -qi slurm-slurmd check what the auth type is – for example, we still use munge, which in my compile is also the default auth type. : # strings `which slurmd` |egrep -i munge DEFAULT_AUTH_TYPE "auth/munge" DEFAULT_CRED_TYPE "cred/munge" #scontrol show config |egrep -i auth AuthAltTypes = (null) AuthAltParameters = (null) AuthInfo = (null) AuthType = auth/munge From: Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com> Sent: Thursday, January 30, 2025 2:07 PM To: John Hearns <hearnsj(a)gmail.com> Cc: slurm-users(a)schedmd.com Subject: [slurm-users] Re: RHEL8.10 V slurmctld Hi, Yes, even ssh works OK. [root@xxxunicobuildt1 warewulf]# ssh xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1> (xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1>) Password: Last login: Wed Jan 29 01:26:21 2025 from 130.195.87.12 [xxxjonesst@xxx.ac.nz@node1 ~]$ xxxjonesst@xxx.ac.nz@node1<mailto:xxxjonesst@xxx.ac.nz@node1> ~]$ whoami | id uid=1204805830(xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz>) gid=1204805830(xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz>) tail -f /var/log/secure ========= Jan 30 18:19:56 node1 sshd[15443]: pam_sss(sshd:auth): authentication success; logname= uid=0 euid=0 tty=ssh ruser= rhost=130.195.87.12 user=xxxjonesst(a)xxx.ac.nz<mailto:user=xxxjonesst@xxx.ac.nz> Jan 30 18:19:56 node1 sshd[15440]: Accepted keyboard-interactive/pam for xxxjonesst(a)xxx.ac.nz<mailto:xxxjonesst@xxx.ac.nz> from 130.195.87.12 port 59402 ssh2 Would there be any relevant changes between RHEL8's slurm and RHEL9's slurm? [root@node1 ~]# rpm -qa |grep slurm slurm-libs-20.11.9-1.el8.x86_64 slurm-slurmd-20.11.9-1.el8.x86_64 slurm-20.11.9-1.el8.x86_64 [root@node1 ~]# I would have to go back and check but I do not think I hit this on RHEL9 what I did get was srun ver22 on the RHEL9 server didnt like srun ver20 on the rocky8 node. Can I compile / rpm build srun ver22 to run on rocky8? or is that part of slurmd? regards Steven ________________________________ From: John Hearns <hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>> Sent: Thursday, 30 January 2025 10:53 pm To: Steven Jones <steven.jones(a)vuw.ac.nz<mailto:steven.jones@vuw.ac.nz>> Cc: slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com> <slurm-users(a)schedmd.com<mailto:slurm-users@schedmd.com>> Subject: Re: [slurm-users] RHEL8.10 V slurmctld You don't often get email from hearnsj(a)gmail.com<mailto:hearnsj@gmail.com>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Have you run id on a computer node? On Wed, Jan 29, 2025, 6:47 PM Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> wrote: I am using Redhat's IdM/IPA for users Slurmctld is failing to run jobs and it is getting "invalid user id". "2025-01-28T21:48:50.271] sched: Allocate JobId=4 NodeList=node4 #CPUs=1 Partition=debug [2025-01-28T21:48:50.280] Killing non-startable batch JobId=4: Invalid user id" id on the slurm controller works fine. [xxxjoness@xxx.ac.nz@hpcunidrslurmd2 ~]$ id xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz> uid=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) gid=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) groups=1204805830(xxxjoness(a)xxx.ac.nz<mailto:xxxjoness@xxx.ac.nz>) 8><--- Any ideas please? because I am out..... I have tried RHEL9.5, this seemed to run but srun is version 22 and on rocky8 it is version20 so fails. regards Steven -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com<mailto:slurm-users-leave@lists.schedmd.com>

1 0

Behavior of 'afterok' in cloud clusters
by Thompson, Hoot (GSFC-606.0)[ADNET SYSTEMS INC] 30 Jan '25

30 Jan '25

The behavior of slurm jobs using the ‘afterok’ dependency seems to have issues with ephemeral compute nodes such as those in a cloud cluster. If the specified jobid dependency is associated with a compute node that has already spun down then a subsequent job that requires successful completion of the prior job will fail with a “Job dependency problem”. This occurs when the subsequent job is tied to a node that must spin up before beginning execution. This phenomenon does not occur if the ‘afterany’ dependency is used. It seems that job completion status is retained when a node is spun down but no information as to whether the job was successfully executed is saved. There are perhaps other scenarios that coud cause the same issue. Has anyone else witnessed this problem? How can it be avoided? afterany This job can begin execution after the specified jobs have terminated. aftercorr A task of this job array can begin execution after the corresponding task ID in the specified job has completed successfully afternotok This job can begin execution after the specified jobs have terminated in some failed state afterok This job can begin execution after the specified jobs have successfully executed

1 0

Optimizing CPU allocation in Slurm with hyperthreading enabled
by Guillaume COCHARD 30 Jan '25

30 Jan '25

Hello, The Slurm documentation states that "The default allocation method within a node is cyclic allocation (allocate available CPUs in a round-robin fashion across the sockets within a node)." In our case, we are using hyperthreading, which means that if two jobs requesting one CPU each arrive at the same time on an empty node, they will be assigned to the two threads of the same physical core. To improve performance, we would like Slurm to allocate CPUs (in our case, threads) in a way that prioritizes using one thread per physical core first, and only once all cores are occupied, assign the second thread of each core. This would be similar to the Least Loaded Node (LLN) approach, but instead of distributing jobs across nodes, it would distribute them across physical cores (Least Loaded Core). We do not want to disable hyperthreading; we simply want to optimize core usage when a machine is not fully loaded. We also want this to be a cluster-wide setting, and not a user and/or job setting. Our current slurm.conf contains: ConstrainCores = no SelectType = select/cons_tres SelectTypeParameters = CR_CPU_MEMORY And our cgroup.conf contains: ConstrainDevices=yes ConstrainCores=yes Does anyone know how to achieve this? Thanks, Guillaume

1 0

Cloud elastic help
by mark.w.moorcroft＠ama-inc.com 29 Jan '25

29 Jan '25

I have a new Slurm setup in AWS gov cloud that is not quite working. I will list a few factoids and maybe someone can suggest where to look next. The Troubleshooting page really has nothing relevant for elastic cloud deployments. The nodes are getting set to DOWN+CLOUD+POWERED_DOWN. Running a job does not launch a node in this state. I can force the nodes to launch with scontrol POWER_UP. The jobs will claim to run, then re-queue, but never complete. When the nodes boot I see them appear in slurmctl, but it soon reports connection lost. The node slurmd claims to be healthy, but the controller eventually just terminates them. You can ping in both directions with the hostnames. I've done 4 clusters. The first was torque/maui and the rest were slurm, but all were bare metal. This is my first attempt at cloud. We have ITAR data, so I can't use Amazon Parallel Computing because it is not offered in GovCloud. https://cluster-in-the-cloud.readthedocs.io/en/latest/running.html I had to fork this project because so much is obsolete, but it's mostly working for me now. https://github.com/mntbighker [root@mgmt ~]# journalctl -fu slurmctld Jan 29 19:16:15 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched/backfill: _attempt_backfill: 1 jobs to backfill Jan 29 19:16:45 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: Updating partition uid access list Jan 29 19:16:45 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: purge_old_job: job file deletion is falling behind, 1 left to remove Jan 29 19:16:45 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched: Running job scheduler for full queue. Jan 29 19:16:45 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched/backfill: _attempt_backfill: beginning Jan 29 19:16:45 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched/backfill: _attempt_backfill: 1 jobs to backfill Jan 29 19:16:50 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sackd_mgr_dump_state: saved state of 0 nodes Jan 29 19:17:15 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched/backfill: _attempt_backfill: beginning Jan 29 19:17:15 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: debug: sched/backfill: _attempt_backfill: 1 jobs to backfill Jan 29 19:17:26 mgmt.many-antelope.citc.local slurmctld[3403]: slurmctld: POWER: Power save mode: 4 nodes [root@mgmt ~]# scontrol show node many-antelope-c5n-2xlarge-0001 NodeName=many-antelope-c5n-2xlarge-0001 CoresPerSocket=4 CPUAlloc=0 CPUEfctv=8 CPUTot=8 CPULoad=0.00 AvailableFeatures=shape=c5n.2xlarge,ad=None,arch=x86_64 ActiveFeatures=shape=c5n.2xlarge,ad=None,arch=x86_64 Gres=(null) NodeAddr=many-antelope-c5n-2xlarge-0001 NodeHostName=many-antelope-c5n-2xlarge-0001 RealMemory=20034 AllocMem=0 FreeMem=N/A Sockets=1 Boards=1 State=DOWN+CLOUD+POWERED_DOWN ThreadsPerCore=2 TmpDisk=0 Weight=1 Owner=N/A MCS_label=N/A Partitions=production,debug,batch,long BootTime=None SlurmdStartTime=None LastBusyTime=Unknown ResumeAfterTime=None CfgTRES=cpu=8,mem=20034M,billing=8 AllocTRES= CurrentWatts=0 AveWatts=0 Reason=Not responding [slurm@2025-01-29T17:49:26] [root@mgmt ~]# scontrol show jobs JobId=30 JobName=test.sl UserId=mwmoorcroft(1106) GroupId=nssam(1101) MCS_label=N/A Priority=1 Nice=0 Account=nssam QOS=(null) JobState=PENDING Reason=Nodes_required_for_job_are_DOWN,_DRAINED_or_reserved_for_jobs_in_higher_priority_partitions Dependency=(null) Requeue=1 Restarts=0 BatchFlag=1 Reboot=0 ExitCode=0:0 RunTime=00:00:00 TimeLimit=01:00:00 TimeMin=N/A SubmitTime=2025-01-29T18:58:26 EligibleTime=2025-01-29T18:58:26 AccrueTime=2025-01-29T18:58:26 StartTime=Unknown EndTime=Unknown Deadline=N/A SuspendTime=None SecsPreSuspend=0 LastSchedEval=2025-01-29T19:19:15 Scheduler=Backfill:* Partition=production AllocNode:Sid=ip-172-16-2-14.us-gov-east-1.compute.internal:7090 ReqNodeList=(null) ExcNodeList=(null) NodeList= NumNodes=1-1 NumCPUs=1 NumTasks=1 CPUs/Task=1 ReqB:S:C:T=0:0:*:* ReqTRES=cpu=1,mem=20034M,node=1,billing=1 AllocTRES=(null) Socks/Node=* NtasksPerN:B:S:C=1:0:*:* CoreSpec=* MinCPUsNode=1 MinMemoryNode=0 MinTmpDiskNode=0 Features=(null) DelayBoot=00:00:00 OverSubscribe=OK Contiguous=0 Licenses=(null) Network=(null) Command=/mnt/shared/home/mwmoorcroft/test.sl WorkDir=/mnt/shared/home/mwmoorcroft StdErr=/mnt/shared/home/mwmoorcroft/slurm-30.out StdIn=/dev/null StdOut=/mnt/shared/home/mwmoorcroft/slurm-30.out

2 2

Adding a permanent node Feature to slurm in AWS parallelcluster
by luigi＠scorzato.it 28 Jan '25

28 Jan '25

I need to add a node Feature to my SLURM AWS parallel-cluster I understand from here: https://groups.google.com/g/slurm-users/c/LgL6hq3XxzE that to add a node feature permanently I have to edit slurm.conf, because the effects of the command: scontrol update NodeName=[node(s)] AvailableFeatures=[comma separated list of features] will not persist after restart (besides, I could not find how to ADD a feature without deleting the existing AvailableFeatures). However, AWS parallelcluster slurm.conf already includes files that contain lines like: NodeName=nn77[1-100] CPUs=2 RealMemory=186777 State=CLOUD Feature=dynamic,g4dn.large,gpu Weight=1000 Gres=gpu:t4:1 which is automatically generated and should not be edited. What is the recommended way to add a feature without breaking the parallelcluster set up? My I put somewhere something like NodeName=nn77[1-100] Feature+=cascadelake ? thank you!

1 0

Automate job lmod environment setup based on node
by Daniel UB 27 Jan '25

27 Jan '25

Greetings ! We're using Slurm 23.11.8 in a small cluster . The control node shares via NFS the directory /clusterprograms with the compute nodes (using the same name as mountpoint) to provide access to available software. The users are instructed to use lmod<https://lmod.readthedocs.io/en/latest/060_locating.html> (module load/avail/purge) to setup their job's runtime environment. We have the software and modules at /clusterprograms distributed like this: /clusterprograms/ ├── common ├── gpu/ │ ├── cuda8/ │ └── cuda10/ └── cpu/ ├── intel/ └── amd/ We configured the /etc/profile.d/ directory on each node so ,when we access them directly (via ssh) the paths used by module (MODULEPATH) are only these: * /home/<user>/modulefiles * /clusterprograms/common/modules * /clusterprograms/<processor vendor or cuda version>/modules The exception is the control/login node, which only has /home/<user>/modulefiles and /clusterprograms/common/modules The issue we have now is this: We are looking for a safe and practical way to automate the reconfiguration of MODULEPATH<https://lmod.readthedocs.io/en/latest/077_ref_counting.html> in the compute nodes when a job is submitted. For now, the only method that is "working" is the following TaskProlog script, but it forces the users to load the modules inside the scripts that may be called by srun steps, rather than being able to load them in the job base step: #!/bin/bash if [[ -n "${SLURM_JOB_CONSTRAINTS}" ]]; then echo "export ORIGINAL_MPATH=${MODULEPATH}" IFS=',' read -ra JOB_ARCH_CONSTRAINTS <<< "$SLURM_JOB_CONSTRAINTS" for constraint in "${JOB_ARCH_CONSTRAINTS[@]}"; do case "${constraint}" in cuda*) echo "export MODULEPATH=/clusterprograms/gpu/${constraint}:${MODULEPATH}" ;; intel-*) echo "export MODULEPATH=/clusterprograms/cpu/intel/${constraint}:${MODULEPATH}" ;; amd-*) echo "export MODULEPATH=/clusterprograms/cpu/amd/${constraint}:${MODULEPATH}" ;; esac done fi Is there any better way to do this ? How is that it doesn't work if we use Prolog ? I tried using the --export option but it doesn't work, since the control node has MODULEPATH set via the main shell profiles. Many thanks !!! -- Daniel Garrapucho Lévy Técnic informàtic Departament de Física de la Matèria Condensada Facultat de Física Martí i Franquès, 1 08028 Barcelona, SPAIN Despatx V302 Email: daniel.garrapucho(a)ub.edu<mailto:daniel.garrapucho@ub.edu> [https://estatics.web.ub.edu/image/company_logo?img_id=2946262&t=17001439433…] Aquest missatge, i els fitxers adjunts que hi pugui haver, pot contenir informació confidencial o protegida legalment i s’adreça exclusivament a la persona o entitat destinatària. Si no consteu com a destinatari final o no teniu l’encàrrec de rebre’l, no esteu autoritzat a llegir-lo, retenir-lo, modificar-lo, distribuir-lo, copiar-lo ni a revelar-ne el contingut. Si l’heu rebut per error, informeu-ne el remitent i elimineu del sistema tant el missatge com els fitxers adjunts que hi pugui haver. Este mensaje, y los ficheros adjuntos que pueda incluir, puede contener información confidencial o legalmente protegida y está exclusivamente dirigido a la persona o entidad destinataria. Si usted no consta como destinatario final ni es la persona encargada de recibirlo, no está autorizado a leerlo, retenerlo, modificarlo, distribuirlo o copiarlo, ni a revelar su contenido. Si lo ha recibido por error, informe de ello al remitente y elimine del sistema tanto el mensaje como los ficheros adjuntos que pueda contener. This email message and any attachments it carries may contain confidential or legally protected material and are intended solely for the individual or organization to whom they are addressed. If you are not the intended recipient of this message or the person responsible for processing it, then you are not authorized to read, save, modify, send, copy or disclose any part of it. If you have received the message by mistake, please inform the sender of this and eliminate the message and any attachments it carries from your account.

1 0

Problems with slurmdbd on Ubuntu 24.04
by karl＠lovink.net 27 Jan '25

27 Jan '25

Hello, Last weekend, I updated my server to ubuntu 24.04 and instead of using my own compiled version of slurm, I switched to the version (23.11.4) that comes with Ubuntu 24.04. Since then, I have been having problems with slurmdbd. I get the following error message: slurmdbd: error: issue making get_lineage procedure slurmdbd: accounting_storage/as_mysql: init: Accounting storage MYSQL plugin failed slurmdbd: debug2: wsrep_on=0 slurmdbd: error: Couldn't load specified plugin name for accounting_storage/mysql: Plugin init() callback failed slurmdbd: error: cannot create accounting_storage context for accounting_storage/mysql slurmdbd: fatal: Unable to initialize accounting_storage/mysql accounting storage plugin My /etc/slurm/slurmdbd.conf looks like this: AuthType=auth/munge DebugLevel=debug5 DbdHost=localhost DbdPort=3306 StorageLoc=slurm_acct_db StoragePass=<password> StorageType=accounting_storage/mysql StorageUser=slurm SlurmUser=admina PluginDir=/usr/lib/x86_64-linux-gnu/slurm-wlm ArchiveEvents=yes ArchiveJobs=yes ArchiveResvs=yes ArchiveSteps=no ArchiveSuspend=no ArchiveTXN=no ArchiveUsage=no AuthInfo=/var/run/munge/munge.socket.2 PurgeEventAfter=1month PurgeJobAfter=12month PurgeResvAfter=1month PurgeStepAfter=1month PurgeSuspendAfter=1month PurgeTXNAfter=12month PurgeUsageAfter=24month LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurmdbd.pid NOTE: Removing the PluginDir directive makes no difference. And the Plugin directory contains the accounting/MySQL file: ls -al /usr/lib/x86_64-linux-gnu/slurm-wlm/*mysql* -rw-r--r-- 1 root root 3145992 Apr 1 2024 /usr/lib/x86_64-linux-gnu/slurm-wlm/accounting_storage_mysql.a -rw-r--r-- 1 root root 1071 Apr 1 2024 /usr/lib/x86_64-linux-gnu/slurm-wlm/accounting_storage_mysql.la -rw-r--r-- 1 root root 501848 Apr 1 2024 /usr/lib/x86_64-linux-gnu/slurm-wlm/accounting_storage_mysql.so I checked already the threat on: https://groups.google.com/g/slurm-users/c/wRV8o7qqGi4 Any idea what is going on here? Regards, Karl

3 4

Re: Problems with slurmdbd on Ubuntu 24.04
by karl＠lovink.net 27 Jan '25

27 Jan '25

Hi Stpehan, It is there: root@vrfcanalyzer:/usr/lib/x86_64-linux-gnu/slurm-wlm# ls -al *mysql* -rw-r--r-- 1 root root 3145992 Apr 1 2024 accounting_storage_mysql.a -rw-r--r-- 1 root root 1071 Apr 1 2024 accounting_storage_mysql.la -rw-r--r-- 1 root root 501848 Apr 1 2024 accounting_storage_mysql.so -rw-r--r-- 1 root root 213700 Apr 1 2024 jobcomp_mysql.a -rw-r--r-- 1 root root 994 Apr 1 2024 jobcomp_mysql.la -rw-r--r-- 1 root root 44240 Apr 1 2024 jobcomp_mysql.so dpkg -S jobcomp_mysql.so slurm-wlm-mysql-plugin: /usr/lib/x86_64-linux-gnu/slurm-wlm/jobcomp_mysql.so root@vrfcanalyzer:/usr/lib/x86_64-linux-gnu/slurm-wlm# -----Original Message----- From: Stephan Roth <stephan.roth(a)isg.ee.ethz.ch> Sent: Monday, 27 January 2025 13:23 To: karl(a)lovink.net; slurm-users(a)lists.schedmd.com Subject: Re: [slurm-users] Problems with slurmdbd on Ubuntu 24.04 Hello Karl, I quickly downloaded slurm-wlm-mysql-plugin_23.11.4-1.2ubuntu5_amd64.deb, unpacked it and saw these contents:ä usr/ ├── lib │ └── x86_64-linux-gnu │ └── slurm-wlm │ ├── accounting_storage_mysql.so │ └── jobcomp_mysql.so └── share ├── doc │ └── slurm-wlm-mysql-plugin │ ├── changelog.Debian.gz -> ../slurm-wlm-basic-plugins/changelog.Debian.gz │ └── copyright └── lintian └── overrides └── slurm-wlm-mysql-plugin So it seems to me you're somehow missing /usr/lib/x86_64-linux-gnu/slurm-wlm/jobcomp_mysql.so Does that help? Best, Stephan On 27.01.25 12:00, karl--- via slurm-users wrote: > Hello, > > Last weekend, I updated my server to ubuntu 24.04 and instead of using > my own compiled version of slurm, I switched to > > the version (23.11.4) that comes with Ubuntu 24.04. Since then, I have > been having problems with slurmdbd. > > I get the following error message: > > slurmdbd: error: issue making get_lineage procedure > > slurmdbd: accounting_storage/as_mysql: init: Accounting storage MYSQL > plugin failed > > slurmdbd: debug2: wsrep_on=0 > > slurmdbd: error: Couldn't load specified plugin name for > accounting_storage/mysql: Plugin init() callback failed > > slurmdbd: error: cannot create accounting_storage context for > accounting_storage/mysql > > slurmdbd: fatal: Unable to initialize accounting_storage/mysql > accounting storage plugin > > My /etc/slurm/slurmdbd.conf looks like this: > > AuthType=auth/munge > > DebugLevel=debug5 > > DbdHost=localhost > > DbdPort=3306 > > StorageLoc=slurm_acct_db > > StoragePass=<password> > > StorageType=accounting_storage/mysql > > StorageUser=slurm > > SlurmUser=admina > > PluginDir=/usr/lib/x86_64-linux-gnu/slurm-wlm > > ArchiveEvents=yes > > ArchiveJobs=yes > > ArchiveResvs=yes > > ArchiveSteps=no > > ArchiveSuspend=no > > ArchiveTXN=no > > ArchiveUsage=no > > AuthInfo=/var/run/munge/munge.socket.2 > > PurgeEventAfter=1month > > PurgeJobAfter=12month > > PurgeResvAfter=1month > > PurgeStepAfter=1month > > PurgeSuspendAfter=1month > > PurgeTXNAfter=12month > > PurgeUsageAfter=24month > > LogFile=/var/log/slurm/slurmdbd.log > > PidFile=/var/run/slurmdbd.pid > > NOTE: Removing the PluginDir directive makes no difference. > > And the Plugin directory contains the accounting/MySQL file: > > ls -al /usr/lib/x86_64-linux-gnu/slurm-wlm/*mysql* > > -rw-r--r-- 1 root root 3145992 Apr 1 2024 /usr/lib/x86_64-linux-gnu/ > slurm-wlm/accounting_storage_mysql.a > > -rw-r--r-- 1 root root 1071 Apr 1 2024 /usr/lib/x86_64-linux-gnu/slurm- > wlm/accounting_storage_mysql.la > > -rw-r--r-- 1 root root 501848 Apr 1 2024 /usr/lib/x86_64-linux-gnu/ > slurm-wlm/accounting_storage_mysql.so > > I checked already the threat on: https://groups.google.com/g/slurm- > users/c/wRV8o7qqGi4 <https://groups.google.com/g/slurm-users/c/wRV8o7qqGi4> > > Any idea what is going on here? > > Regards, > > Karl > > > -- ETH Zurich Stephan Roth Systems Administrator IT Services Group (ISG) D-ITET ETF D 104 Sternwartstrasse 7 8092 Zurich Phone +41 44 632 30 59 stephan.roth(a)isg.ee.ethz.ch www.isg.ee.ethz.ch Working days: Mon, Tue, Thu, Fri

1 0

Slurm version 24.11.1 is now available
by Marshall Garey 24 Jan '25

24 Jan '25

We are pleased to announce the availability of Slurm version 24.11.1. This fixes a few possible crashes of the slurmctld and slurmrestd; a regression in 24.11 which caused file transfers to a job with sbcast to not join the job container namespace; mpi apps using Intel OPA, PSM2 and OMPI 5.x when ran through srun; and various minor to moderate bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.11.1 > ========================== > -- With client commands MIN_MEMORY will show mem_per_tres if specified. > -- Fix errno message about bad constraint > -- slurmctld - Fix crash and possible split brain issue if the > backup controller handles an scontrol reconfigure while in control > before the primary resumes operation. > -- Fix stepmgr not getting dynamic node addrs from the controller > -- stepmgr - avoid "Unexpected missing socket" errors. > -- Fix `scontrol show steps` with dynamic stepmgr > -- Deny jobs using the "R:" option of --signal if PreemptMode=OFF > globally. > -- Force jobs using the "R:" option of --signal to be preemptable > by requeue or cancel only. If PreemptMode on the partition or QOS is off > or suspend, the job will default to using PreemptMode=cancel. > -- If --mem-per-cpu exceeds MaxMemPerCPU, the number of cpus per > task will always be increased even if --cpus-per-task was specified. This > is needed to ensure each task gets the expected amount of memory. > -- Fix compilation issue on OpenSUSE Leap 15 > -- Fix jobs using more nodes than needed when not using -N > -- Fix issue with allocation being allocated less resources > than needed when using --gres-flags=enforce-binding. > -- select/cons_tres - Fix errors with MaxCpusPerSocket partition > limit. Used cpus/cores weren't counted properly, nor limiting free ones > to avail, when the socket was partially allocated, or the job request > went beyond this limit. > -- Fix issue when jobs were preempted for licenses even if there > were enough licenses available. > -- Fix srun ntasks calculation inside an allocation when nodes are > requested using a min-max range. > -- Print correct number of digits for TmpDisk in sdiag. > -- Fix a regression in 24.11 which caused file transfers to a job > with sbcast to not join the job container namespace. > -- data_parser/v0.0.40 - Prevent a segfault in the slurmrestd when > dumping data with v0.0.40+complex data parser. > -- Remove logic to force lowercase GRES names. > -- data_parser/v0.0.42 - Prevent the association id from always > being dumped as NULL when parsing in complex mode. Instead it will now > dump the id. This affects the following endpoints: > GET slurmdb/v0.0.42/association > GET slurmdb/v0.0.42/associations > GET slurmdb/v0.0.42/config > -- Fixed a job requeuing issue that merged job entries into the > same SLUID when all nodes in a job failed simultaneously. > -- When a job completes, try to give idle nodes to reservations with > the REPLACE flag before allowing them to be allocated to jobs. > -- Avoid expensive lookup of all associations when dumping or > parsing for v0.0.42 endpoints. > -- Avoid expensive lookup of all associations when dumping or > parsing for v0.0.41 endpoints. > -- Avoid expensive lookup of all associations when dumping or > parsing for v0.0.40 endpoints. > -- Fix segfault when testing jobs against nodes with invalid gres. > -- Fix performance regression while packing larger RPCs. > -- Document the new mcs/label plugin. > -- job_container/tmpfs - Fix Xauthoirty file being created > outside the container when EntireStepInNS is enabled. > -- job_container/tmpfs - Fix spank_task_post_fork not always > running in the container when EntireStepInNS is enabled. > -- Fix a job potentially getting stuck in CG on permissions > errors while setting up X11 forwarding. > -- Fix error on X11 shutdown if Xauthority file was not created. > -- slurmctld - Fix memory or fd leak if an RPC is recieved that > is not registered for processing. > -- Inject OMPI_MCA_orte_precondition_transports when using PMIx. This fixes > mpi apps using Intel OPA, PSM2 and OMPI 5.x when ran through srun. > -- Don't skip the first partition_job_depth jobs per partition. > -- Fix gres allocation issue after controller restart. > -- Fix issue where jobs requesting cpus-per-gpu hang in queue. > -- switch/hpe_slingshot - Treat HTTP status forbidden the same as > unauthorized, allowing for a graceful retry attempt.

3 2

Slurmd cannot find cgroup plugin
by Webb, Jordan 20 Jan '25

20 Jan '25

Hi all, When trying to start slurmd, it is failing with cgroup issues. Any suggestions on where to troubleshoot this issue? x8000c0s0b0n0:~ # slurmd -V slurm 24.11.0 x8000c0s0b0n0:~ # slurmd -D -vvv slurmd: debug: Log file re-opened slurmd: debug2: hwloc_topology_init slurmd: debug2: hwloc_topology_load slurmd: debug2: hwloc_topology_export_xml slurmd: debug: CPUs:288 Boards:1 Sockets:4 CoresPerSocket:72 ThreadsPerCore:1 slurmd: error: Couldn't find the specified plugin name for cgroup/v2 looking at all files slurmd: error: cannot find cgroup plugin for cgroup/v2 slurmd: error: cannot create cgroup context for cgroup/v2 slurmd: error: Unable to initialize cgroup plugin slurmd: error: slurmd initialization failed x8000c0s0b0n0:~ # mount | grep cgroup cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot) x8000c0s0b0n0:~ # grep cgroup /etc/slurm/slurm.conf ProctrackType=proctrack/cgroup TaskPlugin=task/affinity,task/cgroup Thanks! Jordan

1 1

Re: Slurm "showpartitions" tool has been updated
by Ole Holm Nielsen 17 Jan '25

17 Jan '25

Hi Robert, What's your version of Slurm? We run 24.05.5. The showpartitions tools compacts the list of nodenames using "scontrol show hostlistsorted <nodelist>". Can you please check your scontrol manual page if "hostlistsorted" is documented? Does the command work without -N? Thanks, Ole On 17-01-2025 19:54, Robert Kudyba wrote: > Hello Ole, > > If you'd like me to post this on the Git page LMK. Any idea why this > error invalid encode argument with -N? > ./showpartitions -N > Print partitions nodelists > Partition statistics for cluster axon at Fri Jan 17 13:51:43 EST 2025 > Partition #Nodes #CPU_cores Cores_pending Job_Nodes > MaxJobTime Cores Mem/Node NODELIST > Name State Total Idle Total Idle Resorc Other Min Max Day- > hr:mn /node (GB) > nklab up 4 0 352 125 0 0 1 infin > 10-00:00 48 191+invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > ctn up 3 1 168 152 0 0 1 infin > 10-00:00 56 128 invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > issa up 5 1 384 128 0 0 1 infin > 10-00:00 64 191+invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > naplab up 3 1 320 231 0 0 1 infin > 10-00:00 64 515+invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > lkumar up 3 2 192 191 0 0 1 infin > 10-00:00 64 515 invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > u19moc3 up 1 1 96 96 0 0 1 infin > 10-00:00 96 257 invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > abbott up 3 2 192 187 0 0 1 infin > 10-00:00 64 515 invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > miller up 3 2 192 190 0 0 1 infin > 10-00:00 64 515 invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > burst up 25 10 1896 1300 0 0 1 infin > 5-00:00 48 128+invalid encode argument > scontrol [<OPTION>] [<COMMAND>] > zrc up 6 1 376 190 0 0 1 infin > 10-00:00 48 128+invalid encode argument > > On Fri, Jan 17, 2025 at 7:31 AM Ole Holm Nielsen via slurm-users <slurm- > users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com>> wrote: > > Dear Slurm users, > > The "showpartitions" tool prints a Slurm cluster partition status > overview > with 1 line per partition. Color coding helps locating under- or > over-utilized partitions. > > The Slurm "showpartitions" tool has now been updated with a new "-N" > flag > which prints the nodename list for each partition. > > You can download this tool from > https://urldefense.proofpoint.com/v2/url? > u=https-3A__github.com_OleHolmNielsen_Slurm-5Ftools_tree_master_partitions&d=DwICAg&c=aqMfXOEvEJQh2iQMCb7Wy8l0sPnURkcqADc2guUW8IM&r=X0jL9y0sL4r4iU_qVtR3lLNo4tOL1ry_m7-psV3GejY&m=SvjV7A7QvPs0H4AmOiKvni-pI3DeHZmNgrCPf9ije3ftTN6STgomGCGHyuspdUFz&s=e2VRHqxuaDlLYggVv8eW9tkQqfXU332ucgmnqiU3Toc&e= <https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_OleHolmNiel…> > > If you have any issues or suggestions, please write to > Ole.H.Nielsen(a)fysik.dtu.dk <mailto:Ole.H.Nielsen@fysik.dtu.dk> or > open an issue on GitHub. > > Best regards, > Ole > > -- > Ole Holm Nielsen > PhD, Senior HPC Officer > Department of Physics, Technical University of Denmark > > -- > slurm-users mailing list -- slurm-users(a)lists.schedmd.com > <mailto:slurm-users@lists.schedmd.com> > To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com > <mailto:slurm-users-leave@lists.schedmd.com> >

2 1

Slurm "showpartitions" tool has been updated
by Ole Holm Nielsen 17 Jan '25

17 Jan '25

Dear Slurm users, The "showpartitions" tool prints a Slurm cluster partition status overview with 1 line per partition. Color coding helps locating under- or over-utilized partitions. The Slurm "showpartitions" tool has now been updated with a new "-N" flag which prints the nodename list for each partition. You can download this tool from https://github.com/OleHolmNielsen/Slurm_tools/tree/master/partitions If you have any issues or suggestions, please write to Ole.H.Nielsen(a)fysik.dtu.dk or open an issue on GitHub. Best regards, Ole -- Ole Holm Nielsen PhD, Senior HPC Officer Department of Physics, Technical University of Denmark

1 0

job_container/tmpfs and srun.
by Phill Harvey-Smith 17 Jan '25

17 Jan '25

Hi all, On our setup we are using job_container/tmpfs to give each job it's own temp space. Since our compute nodes have reasonably sized disks for tasks that do a lot of disk I/O on user's data we have asked users to copy their data to the local disk at the beginning of the task and (if needed) copy it back at the end. This saves lots of NFS thrashing slowing down both the task and the NFS servers. However some of our users are having problems with this, their initial sbatch script will create a temp directory in their private /tmp copy their data to it and then try to srun a program. The srun will fall over as it doesn't seem to have have access to the copied data. I suspect this is because the srun task is getting it's own private /tmp. So my question is, is there a way to have the srun task inherit the /tmp of the initial sbatch? I'll include a sample of the script our user is using below. If any further information is required please feel free to ask. Cheers. Phill. #!/usr/bin/bash #SBATCH --nodes 1 #SBATCH --ntasks-per-node=1 #SBATCH --cpus-per-task=1 #SBATCH --time=00:00:10 #SBATCH --mem-per-cpu=3999 #SBATCH --output=script_out.log #SBATCH --error=script_error.log # The above options puts the STDOUT and STDERR of sbatch in # log files prefixed with 'script_'. # Create a randomly-named directory under /tmp jobtmpdir=$(mktemp -d) # Register a function to try and cleanup in case of job failure cleanup_handler() { echo "Cleaning up ${jobtmpdir}" rm -rf ${jobtmpdir} } trap 'cleanup_handler' SIGTERM EXIT # Change working directory to this directory cd ${jobtmpdir} # Copy the executable and input files from # where the job was submitted to the temporary directory. cp ${SLURM_SUBMIT_DIR}/a.out . cp ${SLURM_SUBMIT_DIR}/input.txt . # Run the executable, handling the collection of stdout # and stderr ourselves by redirecting to file srun ./a.out 2> task_error.log > task_out.log # Copy output data back to the submit directory. cp output.txt ${SLURM_SUBMIT_DIR} cp task_out.log ${SLURM_SUBMIT_DIR} cp task_error.log ${SLURM_SUBMIT_DIR} # Cleanup cd ${SLURM_SUBMIT_DIR} cleanup_handler

2 1

Unable to receive password reminder
by Loris Bennett 14 Jan '25

14 Jan '25

Hi, Over a week ago I sent the message below to the address I found for the list owner, but have not received a response. Does anyone know how to proceed in this case? Cheers, Loris -------------------- Start of forwarded message -------------------- From: Loris Bennett <loris.bennett(a)fu-berlin.de> To: <slurm-users-owner(a)lists.schedmd.com> Subject: Unable to receive password reminder Date: Mon, 6 Jan 2025 08:35:42 +0100 Dear list owner, I have recently switched from reading the list via mail to using the mail to news gateway at news.gmane.io. Therefore I would like change my mailman settings in order to stop delivery of postings via mail. As I have forgotten my list password, I requested a reminder. However I get the reply that no user with the given email address was found in the user database. The addresses I tried were loris.bennett(a)fu-berlin.de loris(a)zedat.fu-berlin.de the former being an alias for the latter. This is the email account which to which emails from the list are sent, so I am somewhat confused as to why the neither of the addresses is recognised. Could you please help me to resolve this issue? Regards Loris Bennett -- Dr. Loris Bennett (Herr/Mr) FUB-IT, Freie Universität Berlin -------------------- End of forwarded message -------------------- -- Dr. Loris Bennett (Herr/Mr) FUB-IT, Freie Universität Berlin

2 1

Environment Variables per Queue
by Vitorio Cargnini 14 Jan '25

14 Jan '25

Hello, Can environment variables be set up based on a specific queue? How do I set up the environment variables for a given queue? Like we are deploying SLURM to control our jobs of simulation using VCS, and we don't want to make public the LM_LICENSE environment variable to all users. So we would like to set it on the queue once a job is started on that queue would have that environment variable. Regards, Vitorio

2 1

Discrepancy in TmpDisk values between scontrol and sinfo in Slurm24.05.3
by Gizo Nanava 11 Jan '25

11 Jan '25

There seems to be an issue with the TmpDisk value reporting in Slurm 24.05.3. While the correct value is displayed using the scontrol show nodes command, sinfo appears to report an incorrect value under certain conditions. For example, the TmpDisk parameter for my compute nodes is configured as 21800000 (21.8 TB) in slurm.conf, and this value is shown correctly with > scontrol show nodes ai-n007 ...... State=MIXED ThreadsPerCore=1 TmpDisk=21800000 Weight=1 Owner=N/A MCS_label=N/A .... However, when using the sinfo command with the -O Disk:20 option, the displayed value is 2180000, which is an order of magnitude lower: > sinfo -hO Disk:20 -n ai-n007 2180000 It appears that sinfo might be truncating or misinterpreting values with 8 or more digits. Has anyone encountered a similar issue? Is this a known bug in Slurm 24.05.3? Any suggestions or insights would be greatly appreciated. Best regards, Gizo

2 1

Power saving is getting disabled in Slurm
by Suman Deb 10 Jan '25

10 Jan '25

Hello, We are enabling global power saving for slurm. This is our config. But we are experiencing an issue where Slurm is talking nodes out of power saving mode. We are using config less and dynamic nodes. Slurmctrld logs 2025-01-08T09:54:18.096] Cleared POWER_SAVE flag from nodes dev3-cbf-debug-e2std4-s0-[0-1],dev3-cbf-infra-e2std4-s0-[0-1],dev3-cbf-slurmd-e2std4-[0-4] [2025-01-08T09:54:18.097] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:05:09.683] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:12:00.447] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:17:27.077] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:20:06.735] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:26:16.663] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:26:19.017] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T10:46:25.078] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T15:58:54.080] debug: power_save module disabled, SuspendTime < 0 [2025-01-08T15:58:56.452] debug: power_save module disabled, SuspendTime < 0 [2025-01-09T00:08:01.993] debug: power_save module disabled, SuspendTime < 0 [2025-01-09T00:08:02.157] debug: power_save module disabled, SuspendTime < 0 [2025-01-09T00:14:26.817] debug: power_save module disabled, SuspendTime < 0 [2025-01-09T00:14:26.971] debug: power_save module disabled, SuspendTime < 0 We manage the infra through Puppet and I can confirm is SuspendTime=3600. Slurm version:- slurm 24.05.2 # SLURM POWER SAVING FEATURS SuspendProgram=/etc/slurm/suspend_nodes_slurm.par ResumeProgram=/etc/slurm/resume_nodes_slurm.par SuspendTimeout=600 ResumeTimeout=900 ResumeRate=100 SuspendRate=100 SuspendTime=3600 SlurmctldParameters=enable_configless,cloud_dns,idle_on_node_suspend DebugFlags=Power

1 0

Unexpected node got allocation
by Dan Healy 09 Jan '25

09 Jan '25

Hello there and good morning from Baltimore. I have a small cluster with 100 nodes. When the cluster is completely empty of all jobs, the first job gets allocated to node 41. In other clusters, the first job gets allocated to mode 01. If I specify node 01, the allocation works perfectly. I have my partition NodeName set as node[01-99], so having node41 used first is a surprise to me. We also have many other partitions which start with node41, but the partition being used for the allocation starts with node01. Does anyone know what would cause this? Thanks, Daniel Healy

3 3

need help with seff script on ubuntu (slurm 21.08)
by Gérard Henry (AMU) 09 Jan '25

09 Jan '25

Hello all and happy new year, i have installed slurm 21.08 on ubuntu 22 LTS, and database for accounting on a remote machine running same release. I got seff from: https://support.schedmd.com/show_bug.cgi?id=1611 but, there are errors: Use of uninitialized value $ncpus in numeric eq (==) at /usr/bin/seff line 72, <DATA> line 602. Use of uninitialized value $lmem in numeric lt (<) at /usr/bin/seff line 109, <DATA> line 602. Job ID: 14 Cluster: cathena2 Use of uninitialized value $user in concatenation (.) or string at /usr/bin/seff line 126, <DATA> line 602. does anyone have a more recent version? i try to enable debug uncommenting the line: 60c60 < #print Dumper($job); --- > print Dumper($job); but it's strange, because if you run the seff command several times in a row, the dump result is very different, even though the job has been completed. It doesn't change the most important values, but how is it possible not to have the same output? Thanks in advance for help, -- Gérard HENRY Institut Fresnel - UMR 7249 +33 413945457 Aix-Marseille Université - Campus Etoile, BATIMENT FRESNEL, Avenue Escadrille Normandie Niemen, 13013 Marseille Site : https://fresnel.fr/ Afin de respecter l'environnement, merci de n'imprimer cet email que si nécessaire.

4 3

launch failed requeued held
by sportlecon sportlecon 08 Jan '25

08 Jan '25

slurm 24.11 - squeue displays reason "launch failed requeued held"

2 2

formatting node names
by Davide DelVento 07 Jan '25

07 Jan '25

Hi all, I remember seeing on this list a slurm command to change a slurm-friendly list such as gpu[01-02],node[03-04,12-22,27-32,36] into a bash friendly list such as gpu01 gpu02 node03 node04 node12 etc I made a note about it but I can't find my note anymore, nor the relevant message. Can someone please refresh my memory? I'll be more careful with such a note this time, I promise! Thanks and happy new year!

6 11

Change config file location of slurmdbd temporarily
by Sven Schulze 07 Jan '25

07 Jan '25

Hey all, Is there a way to change the location of the slurmdbd.conf temporarily when starting slurmdbd? For all other daemons I can specify "-f", but this doesn't seem to work for slurmdbd, is there a way to edit the build files to achieve this? Kind Regards, Sven

3 4

Permission denied for slurmdbd.conf
by sportlecon＠gmail.com 07 Jan '25

07 Jan '25

ls -ls /usr/local/slurm/etc/slurmdbd.conf 4 -rw------- 1 slurm slurm 497 Dec 28 16:34 /usr/local/slurm/etc/slurmdbd.conf sudo -u slurm /usr/local/slurm/sbin/slurmdbd -Dvvv slurmdbd: error: s_p_parse_file: unable to read "/usr/local/slurm/etc/slurmdbd.conf": Permission denied slurmdbd: fatal: Could not open/read/parse slurmdbd.conf file /usr/local/slurm/etc/slurmdbd.conf

3 2

Nodes required for job are DOWN, DRAINED or reserved for jobs in higher priority partitions
by sportlecon sportlecon 07 Jan '25

07 Jan '25

JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 26 cpu myscript user1 PD 0:00 4 (Nodes required for job are DOWN, DRAINED or reserved for jobs in higher priority partitions) Anyone can help to fix this?

4 3

All GPUs are Usable if no Gres is Defined
by Jacob Gordon 04 Jan '25

04 Jan '25

Hello, We have a two node GPU cluster with 8 NVidia GPUs. GRES is currently configured and works if a user defines it within their sbtach/interactive job submission (--gres=gpu:3). Users only have access to the GPUs they request. However, when they omit “--gres=gpu:n”, they can use every GPU, which interferes with running jobs that used the gres option. I’m at a loss as to why this is happening. Can someone please look at our configuration to see if anything stands out? SLURM Version = 21.08.5 *Slurm.conf* ClusterName=ommit SlurmctldHost=headnode ProctrackType=proctrack/cgroup ReturnToService=2 SlurmdPidFile=/run/slurmd.pid SlurmdSpoolDir=/var/lib/slurm/slurmd StateSaveLocation=/var/lib/slurm/slurmctld SlurmUser=slurm TaskPlugin=task/cgroup SchedulerType=sched/backfill SelectType=select/cons_tres SelectTypeParameters=CR_Core_Memory AccountingStorageType=accounting_storage/slurmdbd # AccountingStorageType for other resources # AccountingStorageTRES=gres/gpu #DebugFlags=CPU_Bind,gres JobCompType=jobcomp/none JobAcctGatherType=jobacct_gather/cgroup SlurmctldDebug=info SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmdLogFile=/var/log/slurm/slurmd.log DefMemPerCPU=4000 #NodeName=n01 CPUs=256 Boards=1 SocketsPerBoard=2 CoresPerSocket=64 ThreadsPerCore=2 RealMemory=1000000 NodeName=n01 Gres=gpu:nvidia-l40:8 CPUs=256 Boards=1 SocketsPerBoard=2 CoresPerSocket=64 ThreadsPerCore=2 RealMemory=1000000 NodeName=n02 Gres=gpu:nvidia-l40:8 CPUs=256 Boards=1 SocketsPerBoard=2 CoresPerSocket=64 ThreadsPerCore=2 RealMemory=1000000 #Gres config for GPUs GresTypes=gpu PreemptType=preempt/qos PreemptMode=REQUEUE # reset usage after 1 week PriorityUsageResetPeriod=WEEKLY # The job's age factor reaches 1.0 after waiting in the # queue for 2 weeks. PriorityMaxAge=14-0 # This next group determines the weighting of each of the # components of the Multifactor Job Priority Plugin. # The default value for each of the following is 1. PriorityWeightAge=1000 PriorityWeightFairshare=10000 PriorityWeightJobSize=1000 PriorityWeightPartition=1000 PriorityWeightQOS=1500 # Primary partitions PartitionName=debug Nodes=ALL Default=YES MaxTime=INFINITE State=UP PartitionName=all Nodes=n01,n02 Default=YES MaxTime=01:00:00 DefaultTime=00:30:00 State=UP PartitionName=statds Nodes=n01 Default=NO MaxTime=48:00:00 State=UP Priority=100 State=UP OverSubscribe=FORCE AllowAccounts=statds PartitionName=phil Nodes=n02 Default=NO MaxTime=48:00:00 State=UP Priority=100 State=UP OverSubscribe=FORCE AllowAccounts=phil #Set up condo mode # Condo partitions PartitionName=phil_condo Nodes=n02 Default=NO MaxTime=48:00:00 DefaultTime=00:01:00 State=UP Priority=50 OverSubscribe=FORCE AllowQos=normal PartitionName=statds_condo Nodes=n01 Default=NO MaxTime=48:00:00 DefaultTime=00:01:00 State=UP Priority=50 OverSubscribe=FORCE AllowQos=normal JobSubmitPlugins=lua *Gres.conf* NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia0 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia1 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia2 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia3 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia4 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia5 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia6 NodeName=n01 Name=gpu Type=nvidia-l40 File=/dev/nvidia7 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia0 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia1 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia2 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia3 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia4 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia5 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia6 NodeName=n02 Name=gpu Type=nvidia-l40 File=/dev/nvidia7 *Cgroup.conf* CgroupMountpoint="/sys/fs/cgroup" CgroupAutomount=yes CgroupReleaseAgentDir="/etc/slurm/cgroup" AllowedDevicesFile="/etc/slurm/cgroup_allowed_devices_file.conf" ConstrainCores=yes ConstrainDevices=yes ConstrainRAMSpace=yes *cgroup_allowed_devices_file.conf* /dev/null /dev/urandom /dev/zero /dev/sda* /dev/cpu/*/* /dev/pts/* /dev/nvidia*

3 2

Resource guarantees
by christopher.furbee＠jhuapl.edu 23 Dec '24

23 Dec '24

Hello, Long time SGE admin, new SLURM admin here. I recently started the transition of all my clusters from SGE to SLURM and everything was great until I hit the "Taco Bell" cluster (fake name). Taco Bell supports 4 projects and under SGE we had a priority system setup using projects to balance the queue. For the life of me I have been unable to replicate this in SLURM. We are looking to configure guaranteed resources based on the project. I had thought we could accomplish this with QOS and accounts but so far we have failed. What we would like to end up with is; When project Gordita is running uncontested 100% of the cluster is available. While Gordita is running, if Crunchwrap submits their jobs we want the scheduler to prioritize those jobs until a 75% Gordita, 25% Crunchwrap balance of jobs is reached. No preempting or priority overriding, just as a Gordita job finishes, if Crunchwrap is less than 25%, start a Crunchwrap job. And then maintain that balance until one of the projects jobs are 100% completed. Any assistance or guidance is greatly appreciated.

1 0

Slurm plugin for custom hardware allocation
by Laura Zharmukhametova 23 Dec '24

23 Dec '24

Hello, Is there an existing Slurm plugin for FPGA allocation? If not, can someone please point me in the right direction for how to approach it. Many thanks

2 1

sending mails wit smail on rocky9
by Marcus Wagner 19 Dec '24

19 Dec '24

Hi all, I have a problem with sending mails on rocky 9 via Slurm. One needs to install s-nail to have "/bin/mail" being available. There are some caveats in smail. In the second part (for the message, when the job began) one need to pipe ( eg echo "") into $MAIL, even in a script with no input, s-nail wants to be interactive. but it suffices to echo an empty text to snail. Nonetheless, I don't get any mail through. it seems the, mailprog for some reason gets killed or errors out for some other reason. While it is perfectionally working if run from the console :/ I all the time get in the slurmctld.log the following: 27212:[2024-12-19T15:54:54.935] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27213:[2024-12-19T15:54:54.945] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27214:[2024-12-19T15:54:54.945] error: MailProg returned error, it's output was '' 27395:[2024-12-19T15:55:55.540] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27396:[2024-12-19T15:55:55.551] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27397:[2024-12-19T15:55:55.551] error: MailProg returned error, it's output was '' 27438:[2024-12-19T15:56:55.981] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27439:[2024-12-19T15:56:55.981] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27440:[2024-12-19T15:56:55.992] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27441:[2024-12-19T15:56:55.992] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27442:[2024-12-19T15:56:55.992] error: MailProg returned error, it's output was '' 27443:[2024-12-19T15:56:55.992] error: MailProg returned error, it's output was '' 27450:[2024-12-19T15:56:58.849] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27451:[2024-12-19T15:56:58.859] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 0 any hints? Best Marcus -- Dipl.-Inf. Marcus Wagner stellv. Gruppenleitung IT Center Gruppe: Server, Storage, HPC Abteilung: Systeme und Betrieb RWTH Aachen University Seffenter Weg 23 52074 Aachen Tel: +49 241 80 24383 wagner(a)itc.rwth-aachen.de www.itc.rwth-aachen.de Social-Media-Kanäle des IT Centers: https://blog.rwth-aachen.de/itc/ https://www.facebook.com/itcenterrwth https://www.linkedin.com/company/itcenterrwth https://twitter.com/ITCenterRWTH https://www.youtube.com/c/ITCenterRWTHAachen

1 0

lua, glib, gtk, kafka not found for slurm 24.11 and Alma 8
by Bernd Melchers 17 Dec '24

17 Dec '24

Dear all, i tried to rpmbuild slurm-24.11.0 for Alma Linux 8. Build failed because some installed Packages are not found by slurms configure script: rdkafka, glib, gtp and lua But all these packages are installed and they are found by slurm-24.05.x: librdkafka-1.6.1-1.el8.x86_64 librdkafka-devel-1.6.1-1.el8.x86_64 lua-5.3.4-12.el8.x86_64 lua-devel-5.3.4-12.el8.x86_64 glib2-2.56.4-165.el8_10.x86_64 glib2-devel-2.56.4-165.el8_10.x86_64 gtk2-2.24.32-5.el8.x86_64 gtk2-devel-2.24.32-5.el8.x86_64 gtk3-3.22.30-12.el8_10.x86_64 gtk3-devel-3.22.30-12.el8_10.x86_64 Mit freundlichen Grüßen Bernd Melchers -- Archiv- und Backup-Service | fab-service(a)zedat.fu-berlin.de Freie Universität Berlin | Tel. +49-30-838-55905

2 3

AllocNode:Sid in scontrol but not sacct?
by Chris Taylor 17 Dec '24

17 Dec '24

Does the accounting database keep this? Maybe I'm missing something but I don't see a way to query for it in sacct. Chris

1 1

job_container/tmpfs, TmpFS and TmpDisk usage
by Paul Musset 16 Dec '24

16 Dec '24

Hello, I have multiple questions about the usage of job_container/tmpfs, and the TmpFS and TmpDisk variables 1) If my job_container.conf files contains: ``` BasePath=/mnt/slurm_tmp Shared=true ``` is it important what I set TmpFS to in slurm.conf ? Should I set it to '/mnt/slurm_tmp' or '/tmp' ? 2) What size should I put in TmpDisk ? the size advertised by df ? 3) Finally, is there any recommended file system for the partition used as the job_container/tmpfs BasePath ? Best regards, Paul Musset Max Planck Institute for Brain Research

1 0

Difference between sreport's cpu time usage and sacct -j usage
by KK 14 Dec '24

14 Dec '24

Hi all, I have observed a significant discrepancy in CPU usage time calculations between sreport and sacct, and I would like to understand the underlying cause. Let me share the specific case I encountered when calculating CPU usage time for user zt23132881r from November 1, 2024, to November 30, 2024. 1. sreport Results (995,171 minutes): -------------------------------------------------------------------------------- *[root@master ~]# sreport Cluster UserUtilizationByAccount user=zt23132881r start=2024-11-01 end=2024-11-30--------------------------------------------------------------------------------Cluster/User/Account Utilization 2024-11-01T00:00:00 - 2024-11-29T23:59:59 (2505600 secs)Usage reported in CPU Minutes-------------------------------------------------------------------------------- Cluster Login Proper Name Account Used Energy--------- --------- --------------- --------------- -------- ---------djhpc-po+ zt231328+ zt23132881r zt+ zt23132881r_ba+ 995171 6294875* 2. sacct Results: # Without truncate (1,019,927 minutes / 61,195,668 seconds) *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" -X |awk 'BEGIN{total=0}{total+=$6}END{print total}'61195668* # With truncate (967,165 minutes / 58,029,908 seconds) *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" -X --truncate |awk 'BEGIN{total=0}{total+=$6}END{print total}'58029908* # No -X *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" |awk 'BEGIN{total=0}{total+=$6}END{print total}'61195668* The results show three different values: - *sreport: 995,171 minutes* - *sacct (without truncate): 1,019,927 minutes* - *sacct (with truncate): 967,165 minutes* I would appreciate if someone could explain: - Which of these results is more accurate? - How does sreport calculate CPU usage time? - Why does the --truncate option in sacct lead to different results? Thank you for your assistance in clarifying these discrepancies. Best regards

2 1

Node configuration unavailable when using --mem-per-gpu , for specific GPU type
by Matthew R. Baney 13 Dec '24

13 Dec '24

Hi all, I'm seeing some odd behavior when using the --mem-per-gpu flag instead of the --mem flag to request memory when also requesting all available CPUs on a node (in this example, all available nodes have 32 CPUs): $ srun --ntasks-per-node=8 --cpus-per-task=4 --gpus-per-node=gtx1080ti:1 --mem-per-gpu=1g --pty bash srun: error: Unable to allocate resources: Requested node configuration is not available $ srun --ntasks-per-node=8 --cpus-per-task=4 --gpus-per-node=gtx1080ti:1 --mem=1g --pty bash srun: job 3479971 queued and waiting for resources srun: job 3479971 has been allocated resources $ The nodes in this partition have a mix of gtx1080ti and rtx2080ti GPUs, but only one type of GPU is in any one node. The same behavior does not occur when requesting a (node with a) rtx2080ti instead. Is there something I'm missing that would cause the --mem-per-gpu flag to not be working in this example? Thanks, Matthew

1 0

Adding gres usage to the accounting database
by Mark Dixon 13 Dec '24

13 Dec '24

Hello! Our jobs can ask for dedicated per-node disk space, e.g. "--gres=tmp:1G", where an ephemeral directory is managed by the site prolog/epilog and usage is capped using an xfs project quota. This works well, although we really need to look at job_container/tmpfs. I note that slurm already periodically polls jobs for their memory usage, which finds its way into the accounting database tres_usage fields. What would be really nice is if we could extend this polling so that we feed our xfs project quota utilisation into the accounting database, too: users get feedback on what their jobs need, and we notice people who ask for a fraction of a node and all of the disk space, but not use it. Slurm is famous for being extendible. Is there some sort of plugin hook someone can point me at to have a go with, or am I missing a simpler method, please? Thanks! Mark

1 0

Slurm version 24.05.5 is now available
by Marshall Garey 12 Dec '24

12 Dec '24

We are pleased to announce the availability of Slurm version 24.05.5. This release fixes a few potential crashes, several stepmgr bugs, compatibility for sstat and sattach with newer version steps, and some other minor bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.05.5 > ========================== > -- Fix issue signaling cron jobs resulting in unintended requeues. > -- Fix slurmctld memory leak in implementation of HealthCheckNodeState=CYCLE. > -- job_container/tmpfs - Fix SLURM_CONF env variable not being properly set. > -- sched/backfill - Fix job's time_limit being overwritten by time_min for job > arrays in some situations. > -- RoutePart - fix segfault from incorrect memory allocation when node doesn't > exist in any partition. > -- slurmctld - Fix crash when a job is evaluated for a reservation after > removal of a dynamic node. > -- gpu/nvml - Attempt loading libnvidia-ml.so.1 as a fallback for failure in > loading libnvidia-ml.so. > -- slurmrestd - Fix populating non-required object fields of objects as '{}' in > JSON/YAML instead of 'null' causing compiled OpenAPI clients to reject > the response to 'GET /slurm/v0.0.40/jobs' due to validation failure of > '.jobs[].job_resources'. > -- Fix sstat/sattach protocol errors for steps on higher version slurmd's > (regressions since 20.11.0rc1 and 16.05.1rc1 respectively). > -- slurmd - Avoid a crash when starting slurmd version 24.05 with > SlurmdSpoolDir files that have been upgraded to a newer major version of > Slurm. Log warnings instead. > -- Fix race condition in stepmgr step completion handling. > -- Fix slurmctld segfault with stepmgr and MpiParams when running a job array. > -- Fix requeued jobs keeping their priority until the decay thread happens. > -- slurmctld - Fix crash and possible split brain issue if the > backup controller handles an scontrol reconfigure while in control > before the primary resumes operation. > -- Fix stepmgr not getting dynamic node addrs from the controller > -- stepmgr - avoid "Unexpected missing socket" errors. > -- Fix `scontrol show steps` with dynamic stepmgr > -- Support IPv6 in configless mode

1 0

node3 not working - down
by Steven Jones 10 Dec '24

10 Dec '24

Hi, As suggested, 8><--- Stop their services, start them manually one by one (ctld first), then watch whether they talk to each other, and if they don't, learn what stops them from doing so - then iterate editing the config, "scontrol reconfig", lather, rinse, repeat. 8><--- Error logs, On node3, ======== [2024-12-09T21:43:10.694] slurmd started on Mon, 09 Dec 2024 21:43:10 +0000 [2024-12-09T21:43:10.694] CPUs=20 Boards=1 Sockets=20 Cores=1 Threads=1 Memory=48269 TmpDisk=23308 Uptime=3703 CPUSpecList=(null) FeaturesAvail=(null) FeaturesActive=(null) [2024-12-09T23:38:56.645] error: Munge decode failed: Rewound credential [2024-12-09T23:38:56.645] auth/munge: _print_cred: ENCODED: Tue Dec 10 23:38:30 2024 [2024-12-09T23:38:56.645] auth/munge: _print_cred: DECODED: Mon Dec 09 23:38:56 2024 [2024-12-09T23:38:56.645] error: Check for out of sync clocks [2024-12-09T23:38:56.645] error: slurm_receive_msg_and_forward: g_slurm_auth_verify: REQUEST_PING has authentication error: Invalid authentication credential [2024-12-09T23:38:56.645] error: slurm_receive_msg_and_forward: Protocol authentication error [2024-12-09T23:38:56.655] error: service_connection: slurm_receive_msg: Protocol authentication error [2024-12-10T01:13:18.454] Slurmd shutdown completing ====== I have checked the time, this is fine munge.key I ran md5sum over it and get the same output. When I reboot the warewulf nodes its a common Container file so 1~2 working but not 3 is just wierd. On the controller, ========= [2024-12-10T01:30:35.108] Node node2 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.109] Node node1 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.109] Node node6 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.109] Node node7 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.110] Node node3 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.110] Node node5 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:35.110] Node node4 appears to have a different version of Slurm than ours. Please update at your earliest convenience. [2024-12-10T01:30:36.104] SchedulerParameters=default_queue_depth=100,max_rpc_cnt=0,max_sched_time=2,partition_job_depth=0,sched_max_job_start=0,sched_min_interval=2 ========== So the controller is RHEL9 and the nodes Rocky8 However 1~2 and 4~7 work OK. When I run, [root@vuwunicoslurmd1 log]# scontrol show node node3 NodeName=node3 Arch=x86_64 CoresPerSocket=1 CPUAlloc=0 CPUEfctv=20 CPUTot=20 CPULoad=0.00 AvailableFeatures=(null) ActiveFeatures=(null) Gres=(null) NodeAddr=node3 NodeHostName=node3 Version=20.11.9 OS=Linux 4.18.0-553.30.1.el8_10.x86_64 #1 SMP Tue Nov 26 18:56:25 UTC 2024 RealMemory=48000 AllocMem=0 FreeMem=43378 Sockets=20 Boards=1 State=DOWN ThreadsPerCore=1 TmpDisk=0 Weight=1 Owner=N/A MCS_label=N/A Partitions=debug BootTime=2024-12-09T20:41:27 SlurmdStartTime=2024-12-10T01:13:25 LastBusyTime=2024-12-10T01:30:31 CfgTRES=cpu=20,mem=48000M,billing=20 AllocTRES= CapWatts=n/a CurrentWatts=0 AveWatts=0 ExtSensorsJoules=n/s ExtSensorsWatts=0 ExtSensorsTemp=n/s Reason=Node unexpectedly rebooted [slurm@2024-12-09T20:40:27] [root@vuwunicoslurmd1 log]# I get a reason, its like the node is held down / off, does this need to be / can this be cleared? regards Steven

2 2

Job not starting
by Diego Zuccato 10 Dec '24

10 Dec '24

Hello all. An user reported that a job wasn't starting, so I tried to replicate the request and I get: -8<-- [root@ophfe1 root.old]# scontrol show job 113936 JobId=113936 JobName=test.sh UserId=root(0) GroupId=root(0) MCS_label=N/A Priority=1 Nice=0 Account=root QOS=long JobState=PENDING Reason=Priority Dependency=(null) Requeue=1 Restarts=0 BatchFlag=1 Reboot=0 ExitCode=0:0 RunTime=00:00:00 TimeLimit=2-00:00:00 TimeMin=N/A SubmitTime=2024-12-06T13:19:36 EligibleTime=2024-12-06T13:19:36 AccrueTime=2024-12-06T13:19:36 StartTime=Unknown EndTime=Unknown Deadline=N/A SuspendTime=None SecsPreSuspend=0 LastSchedEval=2024-12-06T13:21:32 Scheduler=Backfill:* Partition=m3 AllocNode:Sid=ophfe1:855189 ReqNodeList=(null) ExcNodeList=(null) NodeList= NumNodes=1-1 NumCPUs=96 NumTasks=96 CPUs/Task=1 ReqB:S:C:T=0:0:*:* TRES=cpu=96,mem=95000M,node=1,billing=1296 Socks/Node=* NtasksPerN:B:S:C=0:0:*:* CoreSpec=* MinCPUsNode=1 MinMemoryNode=95000M MinTmpDiskNode=0 Features=(null) DelayBoot=00:00:00 OverSubscribe=OK Contiguous=0 Licenses=(null) Network=(null) Command=/home/root.old/test.sh WorkDir=/home/root.old StdErr=/home/root.old/%N-%J.err StdIn=/dev/null StdOut=/home/root.old/%N-%J.out Power= [root@ophfe1 root.old]# scontrol sho partition m3 PartitionName=m3 AllowGroups=ALL DenyAccounts=formazione AllowQos=ALL AllocNodes=ALL Default=NO QoS=N/A DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=UNLIMITED MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED Nodes=mtx20 PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=CANCEL State=UP TotalCPUs=192 TotalNodes=1 SelectTypeParameters=CR_SOCKET_MEMORY JobDefaults=(null) DefMemPerNode=UNLIMITED MaxMemPerNode=UNLIMITED TRES=cpu=192,mem=1150000M,node=1,billing=2592 TRESBillingWeights=CPU=13.500,Mem=2.2378G [root@ophfe1 root.old]# scontrol show node mtx20 NodeName=mtx20 Arch=x86_64 CoresPerSocket=24 CPUAlloc=0 CPUEfctv=192 CPUTot=192 CPULoad=0.00 AvailableFeatures=ib,matrix,intel,avx ActiveFeatures=ib,matrix,intel,avx Gres=(null) NodeAddr=mtx20 NodeHostName=mtx20 Version=22.05.6 OS=Linux 4.18.0-372.9.1.el8.x86_64 #1 SMP Tue May 10 14:48:47 UTC 2022 RealMemory=1150000 AllocMem=0 FreeMem=1156606 Sockets=4 Boards=1 MemSpecLimit=2048 State=IDLE ThreadsPerCore=2 TmpDisk=0 Weight=8 Owner=N/A MCS_label=N/A Partitions=m3 BootTime=2024-12-06T10:01:42 SlurmdStartTime=2024-12-06T10:02:54 LastBusyTime=2024-12-06T10:51:58 CfgTRES=cpu=192,mem=1150000M,billing=2592 AllocTRES= CapWatts=n/a CurrentWatts=0 AveWatts=0 ExtSensorsJoules=n/s ExtSensorsWatts=0 ExtSensorsTemp=n/s -8<-- So the node is free, the partition does not impose extra limits (used only for accounting factors) but the job does not start. Any hints? Tks -- Diego Zuccato DIFA - Dip. di Fisica e Astronomia Servizi Informatici Alma Mater Studiorum - Università di Bologna V.le Berti-Pichat 6/2 - 40127 Bologna - Italy tel.: +39 051 20 95786

3 5

TRES cpu vs tasks
by Miriam Olmi 10 Dec '24

10 Dec '24

Hi all, I cannot understand the true difference and definition of "core", "task" and "cpu" within the limits associated to a partition via the TRES variable of a QOS. More precisely I have 2 partitions defined as follows: PartitionName=lprod AllowGroups=ALL AllowAccounts=ALL AllowQos=ALL AllocNodes=ALL Default=NO QoS=lprod_part DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=1-00:00:00 MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED MaxCPUsPerSocket=UNLIMITED Nodes=r037c01s[01-12] PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=OFF State=UP TotalCPUs=432 TotalNodes=12 SelectTypeParameters=NONE JobDefaults=(null) DefMemPerNode=UNLIMITED MaxMemPerNode=UNLIMITED TRES=cpu=432,mem=12M,node=12,billing=432 PartitionName=bprod AllowGroups=ALL AllowAccounts=ALL AllowQos=ALL AllocNodes=ALL Default=NO QoS=bprod_part DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=1-00:00:00 MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED MaxCPUsPerSocket=UNLIMITED Nodes=r037c01s[01-12] PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=OFF State=UP TotalCPUs=432 TotalNodes=12 SelectTypeParameters=NONE JobDefaults=(null) DefMemPerNode=UNLIMITED MaxMemPerNode=UNLIMITED TRES=cpu=432,mem=12M,node=12,billing=432 with the two qos defined as: Name Priority GraceTime PreemptMode UsageFactor MaxJobsPU MaxSubmitPU MaxTRES MinTRES Flags -------------------- ---------- ---------- ----------- ----------- --------- ----------- -------------------- -------------------- -------------------------------------------------- lprod_part 0 00:00:00 cluster 1.000000 100 120 cpu=32,mem=366G cpu=1 DenyOnLimit,PartitionMaxNodes,PartitionMinNodes bprod_part 0 00:00:00 cluster 1.000000 100 120 cpu=64,mem=366G cpu=33 DenyOnLimit,OverPartQOS If I try to submit a job on the lprod partition with the directives: #SBATCH --nodes=12 #SBATCH --ntasks-per-node=1 the job is executed correctly while it is not executed if submitted on the bprod partition due to the error: sbatch: error: QOSMinCpuNotSatisfied sbatch: error: Batch job submission failed: Job violates accounting/QOS policy (job submit limit, user's size and/or time limits) I understand that this is related to the limit of cpu associated to the partition via the qos: lprod->[1-32]cpus, bprod->[33-64]cpus but I would like to have a more proper explanation since the options I am using are not referring to "cpu" but to "tasks" and I could not find a proper definition of "cpu" in the framework of the TRES. Many thanks in advance. Best, Miriam

2 2

slurm nodes showing down*
by Steven Jones 09 Dec '24

09 Dec '24

I have just rebuilt all my nodes and I see Only 1 & 2 seem available? While 3~6 are not 3's log, [root@node3 log]# tail slurmd.log [2024-12-08T21:45:51.250] CPU frequency setting not configured for this node [2024-12-08T21:45:51.251] slurmd version 20.11.9 started [2024-12-08T21:45:51.252] slurmd started on Sun, 08 Dec 2024 21:45:51 +0000 [2024-12-08T21:45:51.252] CPUs=20 Boards=1 Sockets=20 Cores=1 Threads=1 Memory=48269 TmpDisk=23324 Uptime=30 CPUSpecList=(null) FeaturesAvail=(null) FeaturesActive=(null) [root@node3 log]# And 7 doesnt want to talk to the controller. [root@node7 slurm]# sinfo slurm_load_partitions: Zero Bytes were transmitted or received [root@node7 slurm]# These are all rebuilt and 1~3 are identical and 4~7 are identical. 7's log keep saying, [2024-12-08T21:49:17.246] error: Unable to register: Zero Bytes were transmitted or received [2024-12-08T21:49:18.263] error: Unable to register: Zero Bytes were transmitted or received [2024-12-08T21:49:19.278] error: Unable to register: Zero Bytes were transmitted or received [2024-12-08T21:49:20.294] error: Unable to register: Zero Bytes were transmitted or received [2024-12-08T21:49:21.310] error: Unable to register: Zero Bytes were transmitted or received [root@vuwunicoslurmd1 slurm]# sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST debug* up infinite 2 idle* node[1-2] debug* up infinite 4 down* node[3-6] [root@vuwunicoslurmd1 slurm]# regards Steven

2 4

error and output files
by michaelmorgan937＠gmail.com 09 Dec '24

09 Dec '24

Hi all, I have a program (for example x.x). When I run it as "x.x -I input -o output", I will get an "output" file, as well as output and error files from slurm. However, all the content of slurm output file is in the "output" file (and there are some extra content), so it is a waste to print the slurm output. Is it possible to set directives so that slurm only print error file? Thank you very much. Michael Morgan

2 1

Why is my job killed when ResumeTimeout is reached instead of it being requeued?
by Xaver Stiensmeier 09 Dec '24

09 Dec '24

Dear Slurm-user list, when a job fails because the node startup fails (cloud scheduling), the job should be re-queued: Resume Timeout Maximum time permitted (in seconds) between when a node resume request is issued and when the node is actually available for use. Nodes which fail to respond in this time frame will be marked DOWN and the jobs scheduled on the node requeued. however, instead of requeuing the job, it is killed. [2024-11-18T10:41:52.003] node bibigrid-worker-wubqboa1z2kkgx0-0 not resumed by ResumeTimeout(1200) - marking down and power_save [2024-11-18T10:41:52.003] Killing JobId=1 on failed node bibigrid-worker-wubqboa1z2kkgx0-0 [2024-11-18T10:41:52.046] update_node: node bibigrid-worker-wubqboa1z2kkgx0-0 reason set to: FailedStartup [2024-11-18T10:41:52.046] power down request repeating for node bibigrid-worker-wubqboa1z2kkgx0-0 Our ResumeProgram does not change the state of the underlying workers, I think we should set the nodes to DOWN explicitly if the startup fails given: *ResumeProgram* is unable to restore a node to service with a responding slurmd and an updated BootTime, it should set the node state to DOWN, which will result in a requeue of any job associated with the node - this will happen automatically if the node doesn't register within ResumeTimeout but in any case as we can see in the log the job should be requeued based on it reaching the ResumeTimeout alone. I am unsure why that is not happening. The power down request is sent by the ResumeFailProgram. We have SlurmctldParameters=idle_on_node_suspend activated, but that shouldn't affect Resume, I guess. My Slurm version is slurm 23.11.5 Best regards, Xaver # More context ## Slurmctld from submitting job to failure [2024-11-18T10:21:45.490] sched: _slurm_rpc_allocate_resources JobId=1 NodeList=bibigrid-worker-wubqboa1z2kkgx0-0 usec=1221 [2024-11-18T10:21:45.499] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:21:58.387] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:21:58.387] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:22:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:23:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:23:20.009] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:23:23.003] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:23:23.398] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:23:23.398] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:23:53.398] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:23:53.398] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:24:21.000] debug: sched: Running job scheduler for full queue. [2024-11-18T10:24:21.484] slurmscriptd: error: _run_script: JobId=0 resumeprog exit status 1:0 [2024-11-18T10:25:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:26:02.000] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:26:02.417] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:26:02.417] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:26:20.007] debug: sched: Running job scheduler for full queue. [2024-11-18T10:26:32.417] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:26:32.417] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:27:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:28:20.003] debug: Updating partition uid access list [2024-11-18T10:28:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:28:20.008] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:29:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:29:22.000] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:29:22.448] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:29:22.448] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:30:20.007] debug: sched: Running job scheduler for full queue. [2024-11-18T10:31:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:32:21.000] debug: sched: Running job scheduler for full queue. [2024-11-18T10:32:42.000] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:32:42.478] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:32:42.478] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:33:12.479] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:33:12.479] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:33:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:33:20.010] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:34:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:35:20.007] debug: sched: Running job scheduler for full queue. [2024-11-18T10:36:01.004] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:36:01.504] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:36:01.504] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:36:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:36:31.505] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:36:31.505] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:37:21.000] debug: sched: Running job scheduler for full queue. [2024-11-18T10:38:20.008] debug: Updating partition uid access list [2024-11-18T10:38:20.008] debug: sched: Running job scheduler for full queue. [2024-11-18T10:38:20.017] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:39:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:39:21.003] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:39:21.530] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:39:21.530] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:39:51.531] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:39:51.531] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:40:21.000] debug: sched: Running job scheduler for full queue. [2024-11-18T10:41:20.003] debug: sched: Running job scheduler for full queue. [2024-11-18T10:41:52.003] node bibigrid-worker-wubqboa1z2kkgx0-0 not resumed by ResumeTimeout(1200) - marking down and power_save [2024-11-18T10:41:52.003] Killing JobId=1 on failed node bibigrid-worker-wubqboa1z2kkgx0-0 [2024-11-18T10:41:52.046] update_node: node bibigrid-worker-wubqboa1z2kkgx0-0 reason set to: FailedStartup [2024-11-18T10:41:52.046] power down request repeating for node bibigrid-worker-wubqboa1z2kkgx0-0 [2024-11-18T10:41:52.047] debug: sackd_mgr_dump_state: saved state of 0 nodes [2024-11-18T10:41:52.549] debug: sched/backfill: _attempt_backfill: beginning [2024-11-18T10:41:52.549] debug: sched/backfill: _attempt_backfill: no jobs to backfill [2024-11-18T10:41:52.736] _slurm_rpc_complete_job_allocation: JobId=1 error Job/step already completing or completed [2024-11-18T10:41:53.000] debug: Spawning ping agent for bibigrid-master-wubqboa1z2kkgx0 [2024-11-18T10:41:53.000] debug: sched: Running job scheduler for default depth. [2024-11-18T10:41:53.014] update_node: node bibigrid-worker-wubqboa1z2kkgx0-0 reason set to: FailedStartup [2024-11-18T10:41:53.014] update_node: node bibigrid-worker-wubqboa1z2kkgx0-0 state set to IDLE

1 1

getting slurm going
by Steven Jones 08 Dec '24

08 Dec '24

What tests can I do to prove that slurm is talking to the nodes pls? regards Steven

3 5

Non-Standard Mail Notification in Job
by Daniel Miliate 05 Dec '24

05 Dec '24

Newbie here, I'm trying to send myself an email notification with a custom body/subject for notification of important events. Is this possible? I've tried a few things in the script below. Thanks in advance and apologies if this is not how this listing works! - Daniel ---- Script ---- .... #SBATCH --mail-user= example(a)example.example #SBATCH --export=ALL #SBATCH --mail-type=ALL # Both of these work which mail which mailx EMAIL="example(a)example.example" # Attempt 1 echo "Test email body" | mail -s "Test Subject" "$EMAIL" # Attempt 2 mail -s "hello" "$EMAIL" <<EOF hello world EOF # Attempt 3 echo "Specific Information" | mail -s "SLURM Job information" $EMAIL ---- End ----

3 2

slurm not running on a warewulf node
by Steven Jones 04 Dec '24

04 Dec '24

Hi, I have set a log creation/location in slurm.conf as, SlurmdLogFile=/var/log/slurm/slurmd.log But it is 0 length. Slurm will not run, what else do I need to do to log why its failing pls? regards Steven

4 6

slurmd on a warwwulf node - not running
by Steven Jones 04 Dec '24

04 Dec '24

Hi, I have munge running on the controller and nodes fine, all tests passed. I have slurmctld running on the controller ok after checking the logs /var/spool/slurmctld was not created which I assume should have happened via the rpm install? Anyway I cant get slurmd to run on the warewulf nodes and cant find any log to check? How to fault find this? regards Steven

3 3

How can I make sure my user have only one job per node (Job array --exclusive=user,)
by Oren 03 Dec '24

03 Dec '24

Hi, I have a cluster of 20-nodes, and I want to run a jobarray on that cluster, but I want each node to get one job per node. When I do the following: #!/bin/bash #SBATCH --job-name=process_images_train # Job name #SBATCH --time=50:00:00 # Time limit hrs:min:sec #SBATCH --tasks=1 #SBATCH --cpus-per-task=4 #SBATCH --mem=50000 #SBATCH --array=0-19# 19 # Job array with 20 jobs (0 to 19) I get 10 jobs in node #1 and 10 jobs in node #20, I want a job in each node. I've tried: #SBATCH --exclusive=user Also #SBATCH --spread-job #SBATCH --distribution=cyclic Nothing changes, node#1 got 10 jobs and node#2 got 10 jobs. Thanks

2 6

multiple conf-server entries for sackd
by Brian Andrus 03 Dec '24

03 Dec '24

Not sure anyone would know, but... If you are running slurm in HA mode (multiple SlurmctldHost entries) is it possible to point sackd to more than one using the --conf-server option? So either specify --conf-server more than once, or have a comma-delimited list of them? The docs are a little light about that. Brian Andrus

1 0

sinfo not listing any partitions
by Kent L. Hanson 02 Dec '24

02 Dec '24

I am doing a new install of slurm 24.05.3 I have all the packages built and installed on headnode and compute node with the same munge.key, slurm.conf, and gres.conf file. I was able to run munge and unmunge commands to test munge successfully. Time is synced with chronyd. I can't seem to find any useful errors in the logs. For some reason when I run sinfo no nodes are listed. I just see the headers for each column. Has anyone seen this or know what a next step of troubleshooting would be? I'm new to this and not sure where to go from here. Thanks for any and all help! The odd output I am seeing [username@headnode ~] sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST (Nothing is output showing status of partition or nodes) Slurm.conf ClusterName=slurmkvasir SlurmctldHost=kadmin2 MpiDefault=none ProctrackType=proctrack/cgroup PrologFlags=contain ReturnToService=2 SlurmctldPidFile=/var/run/slurm/slurmctld.pid SlurmctldPort=6817 SlurmPidFile=/var/run/slurm/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmUser=slurm StateSaveLocation=/var/spool/slurmctld TaskPlugin=task/cgroup MinJobAge=600 SchedulerType=sched/backfill SelectType=select/cons_tres PriorityType=priority/multifactor AccountingStorageHost=localhost AccountingStoragePass=/var/run/munge/munge.socket.2 AccountingStorageType=accounting_storage/slurmdbd AccountingStorageTRES=gres/gpu,cpu,node JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup SlurmctldDebug=info SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmLogFile=/var/log/slurm/slurmd.log nodeName=k[001-448] PartitionName=default Nodes=k[001-448] Default=YES MaxTime=INFINITE State=up Slurmctld.log Error: Configured MailProg is invalid Slurmctld version 24.05.3 started on cluster slurmkvasir Accounting_storage/slurmdbd: clusteracct_storage_p_register_ctld: Regisetering slurmctld at port 8617 Error: read_slurm_conf: default partition not set. Revovered state of 448 nodes Down nodes: k[002-448] Recovered information about 0 jobs Revovered state of 0 reservations Read_slurm_conf: backup_controller not specified Select/cons_tres; select_p_reconfigure: select/cons_tres: reconfigure Running as primary controller Slurmd.log Error: Node configuration differs from hardware: CPUS=1:40(hw) Boards=1:1(hw) SocketsPerBoard=1:2(hw) CoresPerSocket=1:20(hw) ThreadsPerCore:1:1(hw) CPU frequency setting not configured for this node Slurmd version 24.05.3started Slurmd started on Wed, 27 Nov 2024 06:51:03 -0700 CPUS=1 Boards=1 Cores=1 Threads=1 Memory=192030 TmpDisk=95201 uptime 166740 CPUSpecList=(null) FeaturesAvail=(null) FeaturesActive=(null) Error: _forward_thread: failed to k019 (10.142.0.119:6818): Connection timed out (Above line repeated 20 or so times for different nodes.) Thanks, Kent Hanson

6 9

Slurm version 24.11 is now available
by Tim Wickberg 29 Nov '24

29 Nov '24

We are pleased to announce the availability of the Slurm 24.11 release. To highlight some new features in 24.11: - New gpu/nvidia plugin. This does not rely on any NVIDIA libraries, and will build by default on all systems. It supports basic GPU detection and management, but cannot currently identify GPU-to-GPU links, or provide usage data as these are not exposed by the kernel driver. - Add autodetected GPUs to the output from "slurmd -C". - Added new QOS-based reports to "sreport". - Revamped network I/O with the "conmgr" thread-pool model. - Added new "hostlist function" syntax for management commands and configuration files. - switch/hpe_slingshot - Added support for hardware collectives setup through the fabric manager. (Requires SlurmctldParameters=enable_stepmgr) - Added SchedulerParameters=bf_allow_magnetic_slot configuration option to allow backfill planning for magnetic reservations. - Added new "scontrol listjobs" and "liststeps" commands to complement "listpids", and provide --json/--yaml output for all three subcommands. - Allow jobs to be submitted against multiple QOSes. - Added new experimental "oracle" backfill scheduling support, which permits jobs to be delayed if the oracle function determines the reduced fragmentation of the network topology is sufficiently advantageous. - Improved responsiveness of the controller when jobs are requeued by replacing the "db_index" identifier with a slurmctld-generated unique identifier. ("SLUID") - New options to job_container/tmpfs to permit site-specific scripts to modify the namespace before user steps are launched, and to ensure all steps are completely captured within that namespace. The Slurm documentation has also been updated to the 24.11 release. (Older versions can be found in the archive, linked from the main documentation page.) Slurm can be downloaded from https://www.schedmd.com/download-slurm/ . - Tim -- Tim Wickberg Chief Technology Officer, SchedMD LLC Commercial Slurm Development and Support

1 0

Non-intiutive rank placement/CPU masking
by Ohlerich, Martin 28 Nov '24

28 Nov '24

Dear * , I've some question for understanding. Essentially, I use the following job script: ---------------------------> #!/bin/bash #SBATCH -J srun_test #SBATCH --time=0:02:00 #SBATCH --export=NONE #SBATCH --partition=test #SBATCH --nodes=2 #SBATCH -o ./%x.%j.out #SBATCH -D . srun --export=all --mpi=pmi2 --verbose --cpu-bind=verbose -n 96 --ntasks-per-node=48 --ntasks-per-socket=24 -c 2 -m block:block -B 2:56:1 /lrz/sys/tools/placement_test_2021/bin/placement-test.intel_impi ---------------------------> On a sapphire rapid with 2 sockets and 56 physical CPUs. The executable is just some MPI dummy, build with Intel Compilers and Intel MPI (although I guess that's not essential here). The related MPI environment looks as show below (1). Slurm environment is shown below under (2). Now. what I would expect intuitively is that I place here 24 ranks per socket. And here also on the even CPUs in sequence starting from CPU 0 of each socket. What I get is srun: defined options srun: -------------------- -------------------- srun: (null) : i20r01c01s[06,08] srun: cpu-bind : verbose srun: cpus-per-task : 2 srun: distribution : block:block srun: export : all srun: extra-node-info : 2:56:1 srun: jobid : 395726 srun: job-name : MGLET_srun srun: mpi : pmi2 srun: nodes : 2 srun: ntasks : 96 srun: ntasks-per-node : 48 srun: ntasks-per-socket : 24 srun: verbose : 1 srun: -------------------- -------------------- srun: end of defined options srun: jobid 395726: nodes(2):`i20r01c01s[06,08]', cpu counts: 224(x2) srun: Implicitly setting --exact, because -c/--cpus-per-task given. srun: CpuBindType=verbose,threads srun: launching StepId=395726.0 on host i20r01c01s06, 48 tasks: [0-47] srun: launching StepId=395726.0 on host i20r01c01s08, 48 tasks: [48-95] srun: topology/tree: init: topology tree plugin loaded cpu-bind=MASK - i20r01c01s06, task 1 1 [98437]: mask 0xc set cpu-bind=MASK - i20r01c01s06, task 2 2 [98438]: mask 0x30 set cpu-bind=MASK - i20r01c01s06, task 3 3 [98439]: mask 0xc0 set cpu-bind=MASK - i20r01c01s06, task 4 4 [98440]: mask 0x300 set cpu-bind=MASK - i20r01c01s06, task 5 5 [98441]: mask 0xc00 set cpu-bind=MASK - i20r01c01s06, task 6 6 [98442]: mask 0x3000 set cpu-bind=MASK - i20r01c01s06, task 7 7 [98443]: mask 0xc000 set cpu-bind=MASK - i20r01c01s06, task 8 8 [98444]: mask 0x30000 set cpu-bind=MASK - i20r01c01s06, task 9 9 [98445]: mask 0xc0000 set cpu-bind=MASK - i20r01c01s06, task 10 10 [98446]: mask 0x300000 set cpu-bind=MASK - i20r01c01s06, task 11 11 [98447]: mask 0xc00000 set cpu-bind=MASK - i20r01c01s06, task 12 12 [98448]: mask 0x3000000 set cpu-bind=MASK - i20r01c01s06, task 13 13 [98449]: mask 0xc000000 set cpu-bind=MASK - i20r01c01s06, task 14 14 [98450]: mask 0x30000000 set cpu-bind=MASK - i20r01c01s06, task 15 15 [98451]: mask 0xc0000000 set cpu-bind=MASK - i20r01c01s06, task 16 16 [98452]: mask 0x300000000 set cpu-bind=MASK - i20r01c01s06, task 17 17 [98453]: mask 0xc00000000 set cpu-bind=MASK - i20r01c01s06, task 18 18 [98454]: mask 0x3000000000 set cpu-bind=MASK - i20r01c01s06, task 19 19 [98455]: mask 0xc000000000 set cpu-bind=MASK - i20r01c01s06, task 20 20 [98456]: mask 0x30000000000 set cpu-bind=MASK - i20r01c01s06, task 21 21 [98457]: mask 0xc0000000000 set cpu-bind=MASK - i20r01c01s06, task 22 22 [98458]: mask 0x300000000000 set cpu-bind=MASK - i20r01c01s06, task 23 23 [98459]: mask 0xc00000000000 set cpu-bind=MASK - i20r01c01s06, task 24 24 [98460]: mask 0x300000000000000 set cpu-bind=MASK - i20r01c01s06, task 25 25 [98461]: mask 0xc00000000000000 set cpu-bind=MASK - i20r01c01s06, task 26 26 [98462]: mask 0x3000000000000000 set cpu-bind=MASK - i20r01c01s06, task 27 27 [98463]: mask 0xc000000000000000 set cpu-bind=MASK - i20r01c01s06, task 28 28 [98464]: mask 0x30000000000000000 set cpu-bind=MASK - i20r01c01s06, task 29 29 [98465]: mask 0xc0000000000000000 set cpu-bind=MASK - i20r01c01s06, task 30 30 [98466]: mask 0x300000000000000000 set cpu-bind=MASK - i20r01c01s06, task 31 31 [98467]: mask 0xc00000000000000000 set cpu-bind=MASK - i20r01c01s06, task 32 32 [98468]: mask 0x3000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 33 33 [98469]: mask 0xc000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 34 34 [98470]: mask 0x30000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 35 35 [98471]: mask 0xc0000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 36 36 [98472]: mask 0x300000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 37 37 [98473]: mask 0xc00000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 38 38 [98474]: mask 0x3000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 39 39 [98475]: mask 0xc000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 40 40 [98476]: mask 0x30000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 41 41 [98477]: mask 0xc0000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 42 42 [98478]: mask 0x300000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 43 43 [98479]: mask 0xc00000000000000000000000 set cpu-bind=MASK - i20r01c01s06, task 44 44 [98480]: mask 0x3 set cpu-bind=MASK - i20r01c01s06, task 45 45 [98481]: mask 0xc set cpu-bind=MASK - i20r01c01s06, task 46 46 [98482]: mask 0x30 set srun: Node i20r01c01s06, 48 tasks started cpu-bind=MASK - i20r01c01s08, task 48 0 [179006]: mask 0x3 set cpu-bind=MASK - i20r01c01s08, task 49 1 [179007]: mask 0xc set cpu-bind=MASK - i20r01c01s08, task 50 2 [179008]: mask 0x30 set cpu-bind=MASK - i20r01c01s08, task 51 3 [179009]: mask 0xc0 set cpu-bind=MASK - i20r01c01s08, task 52 4 [179010]: mask 0x300 set cpu-bind=MASK - i20r01c01s08, task 53 5 [179011]: mask 0xc00 set cpu-bind=MASK - i20r01c01s08, task 54 6 [179012]: mask 0x3000 set cpu-bind=MASK - i20r01c01s08, task 55 7 [179013]: mask 0xc000 set cpu-bind=MASK - i20r01c01s08, task 56 8 [179014]: mask 0x30000 set cpu-bind=MASK - i20r01c01s08, task 57 9 [179015]: mask 0xc0000 set cpu-bind=MASK - i20r01c01s08, task 58 10 [179016]: mask 0x300000 set cpu-bind=MASK - i20r01c01s08, task 59 11 [179017]: mask 0xc00000 set cpu-bind=MASK - i20r01c01s08, task 60 12 [179018]: mask 0x3000000 set cpu-bind=MASK - i20r01c01s08, task 61 13 [179019]: mask 0xc000000 set cpu-bind=MASK - i20r01c01s08, task 62 14 [179020]: mask 0x30000000 set cpu-bind=MASK - i20r01c01s08, task 63 15 [179021]: mask 0xc0000000 set cpu-bind=MASK - i20r01c01s08, task 64 16 [179022]: mask 0x300000000 set cpu-bind=MASK - i20r01c01s08, task 65 17 [179023]: mask 0xc00000000 set cpu-bind=MASK - i20r01c01s08, task 66 18 [179024]: mask 0x3000000000 set cpu-bind=MASK - i20r01c01s08, task 67 19 [179025]: mask 0xc000000000 set cpu-bind=MASK - i20r01c01s08, task 68 20 [179026]: mask 0x30000000000 set cpu-bind=MASK - i20r01c01s08, task 69 21 [179027]: mask 0xc0000000000 set cpu-bind=MASK - i20r01c01s08, task 70 22 [179028]: mask 0x300000000000 set cpu-bind=MASK - i20r01c01s08, task 71 23 [179029]: mask 0xc00000000000 set cpu-bind=MASK - i20r01c01s08, task 72 24 [179030]: mask 0x300000000000000 set cpu-bind=MASK - i20r01c01s08, task 73 25 [179031]: mask 0xc00000000000000 set cpu-bind=MASK - i20r01c01s08, task 74 26 [179032]: mask 0x3000000000000000 set cpu-bind=MASK - i20r01c01s08, task 75 27 [179033]: mask 0xc000000000000000 set cpu-bind=MASK - i20r01c01s08, task 76 28 [179034]: mask 0x30000000000000000 set cpu-bind=MASK - i20r01c01s08, task 77 29 [179035]: mask 0xc0000000000000000 set cpu-bind=MASK - i20r01c01s08, task 78 30 [179036]: mask 0x300000000000000000 set cpu-bind=MASK - i20r01c01s08, task 79 31 [179037]: mask 0xc00000000000000000 set cpu-bind=MASK - i20r01c01s08, task 80 32 [179038]: mask 0x3000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 81 33 [179039]: mask 0xc000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 82 34 [179040]: mask 0x30000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 83 35 [179041]: mask 0xc0000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 84 36 [179042]: mask 0x300000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 85 37 [179043]: mask 0xc00000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 86 38 [179044]: mask 0x3000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 87 39 [179045]: mask 0xc000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 88 40 [179046]: mask 0x30000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 89 41 [179047]: mask 0xc0000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 90 42 [179048]: mask 0x300000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 91 43 [179049]: mask 0xc00000000000000000000000 set cpu-bind=MASK - i20r01c01s08, task 92 44 [179050]: mask 0x3 set cpu-bind=MASK - i20r01c01s08, task 93 45 [179051]: mask 0xc set cpu-bind=MASK - i20r01c01s08, task 94 46 [179052]: mask 0x30 set cpu-bind=MASK - i20r01c01s08, task 95 47 [179053]: mask 0xc0 set srun: Node i20r01c01s08, 48 tasks started cpu-bind=MASK - i20r01c01s06, task 47 47 [98483]: mask 0xc0 set In words: the last 4 ranks meant for the second socket of each node are actually placed on the first socket ... So, effectively --ntasks-per-socket is then ignored? I couldn't see an obvious reason for that. Maybe I miss some important point ... or neglect some interference with Intel MPI's runtime environment (there didn't change anything in the masks when unsetting KMP_AFFINITY). I'd like also to mention that explicit placement via cpu_map does the right thing. ---------------------------> #!/bin/bash #SBATCH -J srun_test #SBATCH --time=0:02:00 #SBATCH --export=NONE #SBATCH --partition=test #SBATCH --nodes=2 #SBATCH --ntasks-per-node=48 #SBATCH -o ./%x.%j.out #SBATCH -D . srun --export=all --mpi=pmi2 --cpu-bind=map_cpu:$(seq 0 2 46 | tr '\n' ',')$(seq 56 2 102 | tr '\n' ',') /lrz/sys/tools/placement_test_2021/bin/placement-test.intel_impi ---------------------------> So, a workaround is available for me. But if I could get some illuminating hint on where my intuition failed above, I'd be very grateful. Thank you! Cheers, Martin (1) I_MPI_FILESYSTEM=on I_MPI_HYDRA_BOOTSTRAP=slurm I_MPI_HYDRA_BOOTSTRAP_EXEC_EXTRA_ARGS=--external-launcher I_MPI_HYDRA_BRANCH_COUNT=128 I_MPI_OFFLOAD=0 I_MPI_OFFLOAD_FAST_MEMCPY_COLL=0 I_MPI_OFFLOAD_RDMA=0 I_MPI_OFI_PROVIDER=psm3 I_MPI_ROOT=/dss/lrzsys/sys/spack/release/24.1.0/opt/x86_64/intel-oneapi-mpi/2021.11.0-gcc-w56vuor/mpi/2021.11 KMP_AFFINITY=granularity=thread,compact,1,0 (2) SLURMD_NODENAME=i20r01c01s06 SLURM_CLUSTER_NAME=sng2 SLURM_CONF=/etc/slurm/slurm.conf SLURM_CPUS_ON_NODE=224 SLURM_ECLIBR=0 SLURM_ECPLUG=1 SLURM_ERLAST=sbatch SLURM_ERSBAC=1 SLURM_GET_USER_ENV=0 SLURM_GTIDS=0 SLURM_JOBID=395726 SLURM_JOB_ACCOUNT=pr28fa SLURM_JOB_CPUS_PER_NODE=224(x2) SLURM_JOB_END_TIME=1732781080 SLURM_JOB_GID=3000114 SLURM_JOB_ID=395726 SLURM_JOB_NAME=MGLET_srun SLURM_JOB_NODELIST=i20r01c01s[06,08] SLURM_JOB_NUM_NODES=2 SLURM_JOB_PARTITION=test SLURM_JOB_QOS=test SLURM_JOB_START_TIME=1732780959 SLURM_JOB_UID=3808660 SLURM_JOB_USER=di49zop SLURM_LOCALID=0 SLURM_NNODES=2 SLURM_NODEID=0 SLURM_NODELIST=i20r01c01s[06,08] SLURM_PRIO_PROCESS=0 SLURM_PROCID=0 SLURM_SCRIPT_CONTEXT=prolog_task SLURM_SETUP_LICENSE=open source - no access restrictions SLURM_SETUP_MAINTAINER_LIST=Bader(a)lrz.de SLURM_SUBMIT_DIR=/dss/dsshome1/00/di49zop/test_mglet SLURM_SUBMIT_HOST=login26 SLURM_TASKS_PER_NODE=224(x2) SLURM_TASK_PID=98399 SLURM_TOPOLOGY_ADDR=leaf.m02r05.i20r01c01s06 SLURM_TOPOLOGY_ADDR_PATTERN=switch.switch.node

1 0

I'm very confused about priority/fairshare calculation
by Cutts, Tim 27 Nov '24

27 Nov '24

I don't know how many times I've read the docs; I keep thinking I understand it, but something is really wrong with prioritisation on our cluster, and we're struggling to understand why. The setup: 1. We have a group who submit two types of work; production jobs and research jobs. 2. We have two sacctmgr accounts for this; let's call those 'prod' and 'research'. 3. We also have some dedicated hardware that they paid for which can be used only by users associated with the prod account. Desired behaviour: 1. Usage of their dedicated hardware by production jobs should not hugely decrease the fairshare priority for research jobs in other partitions. 2. Usage of shared hardware should decrease their fairshare priority (whether by production or research jobs) 3. Memory should make a relatively small contribution to TRES usage (it's not normally the constrained resource) Our approach: Set TRESBillingWeights for cpu, memory and gres/GPU usage on shared partitions. Typically these are set to: CPU=1.0,Mem=0.25G,GRES/gpu=1.0 Set TRESBillingWeights to something small on the dedicated hardware partition, such as: CPU=0.25 Set PriorityWeightFairshare and PriorityWeightAge to values such that Fairshare dominates when jobs are young, and Age takes over if they've been pending a long time The observed behaviour: 1. production association jobs have a high priority; this is working well 2. research jobs are still getting heavily penalised in fairshare, and we don't understand why; they seem to have enormous RawUsage, largely coming from memory: Here's what I see from sshare (sensitive details removed, obviously): sshare -l -A prod, research -a -o Account,RawUsage,EffectvUsage,FairShare,LevelFS,TRESRunMins%80 | grep -v cpu=0 > ' Account RawUsage EffectvUsage FairShare LevelFS TRESRunMins -------------------- ----------- ------------- ---------- ---------- -------------------------------------------------------------------------------- prod 1587283 0.884373 0.226149 cpu=81371,mem=669457237,energy=0,node=20610,billing=100833,fs/disk=0,vmem=0,pag+ prod 1082008 0.681681 0.963786 0.366740 cpu=81281,mem=669273429,energy=0,node=20520,billing=100833,fs/disk=0,vmem=0,pag+ prod 505090 0.318202 0.964027 0.785664 cpu=90,mem=184320,energy=0,node=90,billing=0,fs/disk=0,vmem=0,pages=0,gres/gpu=+ research 1043560787 0.380577 0.121648 cpu=17181098808,mem=35196566339054,energy=0,node=4295361360,billing=25773481938+ research 146841 0.000141 0.005311 124.679238 cpu=824,mem=3375923,energy=0,node=824,billing=824,fs/disk=0,vmem=0,pages=0,gres+ research 17530141 0.016798 0.001449 1.044377 cpu=254484,mem=3379938816,energy=0,node=161907,billing=893592,fs/disk=0,vmem=0,+ research 167597 0.000161 0.005070 109.238498 cpu=7275,mem=223516160,energy=0,node=7275,billing=50931,fs/disk=0,vmem=0,pages=+ research 12712481 0.012182 0.001931 1.440166 cpu=186327,mem=95399526,energy=0,node=23290,billing=232909,fs/disk=0,vmem=0,pag+ research 11521011 0.011040 0.002173 1.589104 cpu=8167,mem=267626086,energy=0,node=8167,billing=65338,fs/disk=0,vmem=0,pages=+ research 9719735 0.009314 0.002414 1.883599 cpu=15020,mem=69214617,energy=0,node=1877,billing=3755,fs/disk=0,vmem=0,pages=0+ research 25004766 0.023961 0.001207 0.732184 cpu=590778,mem=6464600473,energy=0,node=98910,billing=2266887,fs/disk=0,vmem=0,+ research 68938740 0.066061 0.000724 0.265570 cpu=159332,mem=963064985,energy=0,node=89957,billing=192706,fs/disk=0,vmem=0,pa+ research 7359413 0.007052 0.002656 2.487710 cpu=81401,mem=583487624,energy=0,node=20350,billing=20350,fs/disk=0,vmem=0,page+ research 718714430 0.688714 0.000241 0.025473 cpu=20616,mem=337774728,energy=0,node=5154,billing=92772,fs/disk=0,vmem=0,pages+ research 1016606 0.000974 0.003863 18.009010 cpu=17179774580,mem=35184178340113,energy=0,node=4294943645,billing=25769661870+ Firstly, why are the mem TRES numbers so enormous? Secondly, what's going on with the last user, where the rawusage is tiny, but the TRESRunMins is ridiculously big? That could be messing up the whole thing. Thanks in advance for any advice (either that can help explain what I've misunderstood, or to suggestions of "there's a better way to achieve what you want") Tim -- Tim Cutts Scientific Computing Platform Lead AstraZeneca ________________________________ AstraZeneca UK Limited is a company incorporated in England and Wales with registered number:03674842 and its registered office at 1 Francis Crick Avenue, Cambridge Biomedical Campus, Cambridge, CB2 0AA. This e-mail and its attachments are intended for the above named recipient only and may contain confidential and privileged information. If they have come to you in error, you must not copy or show them to anyone; instead, please reply to this e-mail, highlighting the error to the sender and then immediately delete the message. For information about how AstraZeneca UK Limited and its affiliates may process information, personal data and monitor communications, please see our privacy notice at www.astrazeneca.com<https://www.astrazeneca.com>

1 0

making a maint reservation on a specific GPU
by Paul Raines 22 Nov '24

22 Nov '24

We have a 8 GPU server in which one GPU has gone into an error state that will require a reboot to clear. I have jobs on the server running on good GPUs that will take another 3 days to complete. In the meantime, I would like short jobs to run on the good free GPUs till I reboot. I set a reservation for the time window I plan to reboot on the whole node with scontrol create reservation reservationName=rtx-01_reboot users=root starttime=2024-11-25T06:00:00 duration=720 Nodes=rtx-01 flags=maint,ignore_jobs But I would like to set a reservation on just the bad GPU (gpu_id=7) from now till 2024-11-25T06:00:00 so no job runs that will use it. Is that possible? --------------------------------------------------------------- Paul Raines http://help.nmr.mgh.harvard.edu MGH/MIT/HMS Athinoula A. Martinos Center for Biomedical Imaging 149 (2301) 13th Street Charlestown, MA 02129 USA The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Mass General Brigham Compliance HelpLine at https://www.massgeneralbrigham.org/complianceline <https://www.massgeneralbrigham.org/complianceline> . Please note that this e-mail is not secure (encrypted). If you do not wish to continue communication over unencrypted e-mail, please notify the sender of this message immediately. Continuing to send or respond to e-mail after receiving this message means you understand and accept this risk and wish to continue to communicate over unencrypted e-mail.

1 0

Suspending jobs and resuming
by Ratnasamy, Fritz 22 Nov '24

22 Nov '24

Hi, I am using an old slurm version 20.11.8 and we had to reboot our cluster today for maintenance. I suspended all the jobs on it with the command scontrol suspend list_job_ids and all the jobs paused and were suspended. However, when I tried to resume them after the reboot, scontrol resume did not work (it was showing in the reason column " (JobHeldAdmin)". I was able to release them with scontrol release and the jobs started to run back. However, the SLURM recorded time on it resetted (Time columns, showing 0:00 for all the jobs) though the jobs seem to have re-started from the last point before he got suspended. 1- Did I follow the right procedure to suspend, reboot and resume/release? 2- In this case, does the wall time for all the jobs goes into reset and therefore anyone with slurm admin rights will be able to have their jobs last longer than the wall time limit by suspending and resuming a job? Best, *Fritz Ratnasamy* Data Scientist Information Technology

2 1

Slurm PID Files
by Matthias Leopold 20 Nov '24

20 Nov '24

Hi, I compiled and installed Slurm 24.05 on Ubuntu 22.04 following this tutorial: https://www.schedmd.com/slurm/installation-tutorial/ Systemd service files are from deb packages that result from this. Do I have to worry that slurmctld and slurmd don't write PID files although SlurmctldPidFile and SlurmdPidFile are defined in slurm.conf? Paths for PID files exist and are writeable, logs don't show any error. slurmdbd does write a PID file as defined in slurmdbd.conf. thx Matthias

1 0

Does Slurm support DSP
by shaobo liu 20 Nov '24

20 Nov '24

Dear all Does slurm support DSP (Digital Signal Processing)? slurm website does not see DSP related content。

3 4

Does Slurm support DSP
by shaobo liu 20 Nov '24

20 Nov '24

Dear all Does slurm support DSP (Digital Signal Processing)? slurm website does not see DSP related content。

1 0

error: Unable to contact slurm controller (connect failure)
by Daniel Rodriguez Lopez (ext) 19 Nov '24

19 Nov '24

Dear all, We recently tried to fix our version of slurm in every node of our cluster. After the instalation (slurm 20.11.9) in one of the compute nodes, most of the commads (squeue, sinfo, scontrol show config etc) returns this error: error: Unable to contact slurm controller (connect failure) The .log files don't show any errors, we have both debugs values equal to debug5. Also, the rest of the cluster works as usual. I appreciate any insight on what could be the cause. Thank you and regards, Daniel

4 3

Slurm services status=1/FAILURE for CentOs cluster
by Mojtaba Farrokhbin 19 Nov '24

19 Nov '24

<https://superuser.com/posts/1862116/timeline> I have reinstalled slurm resource management on a HPC cluster. But it seems there is a problem on starting slurmd services. Here is the system status: "systemctl status slurmd" shows: ● slurmd.service - Slurm node daemon Loaded: loaded (/usr/lib/systemd/system/slurmd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sun 2024-11-10 11:31:24 +0130; 1 weeks 1 days ago ------------------------------------------- The slurm.conf output is: # # Example slurm.conf file. Please run configurator.html # (in doc/html) to build a configuration file customized # for your environment. # # # slurm.conf file generated by configurator.html. # # See the slurm.conf man page for more information. # ClusterName=linux ControlMachine=master.cluster.... #ControlAddr= #BackupController= #BackupAddr= # SlurmUser=slurm #SlurmdUser=root SlurmctldPort=6817 SlurmdPort=6818 AuthType=auth/munge #JobCredentialPrivateKey= #JobCredentialPublicCertificate= StateSaveLocation=/var/spool/slurm/ctld SlurmdSpoolDir=/var/spool/slurm/d SwitchType=switch/none MpiDefault=none SlurmctldPidFile=/var/run/slurmctld.pid SlurmdPidFile=/var/run/slurmd.pid #ProctrackType=proctrack/pgid ProctrackType=proctrack/cgroup TaskPlugin=task/cgroup TaskPluginParam=cpusets #PluginDir= #FirstJobId= #MaxJobCount= #PlugStackConfig= #PropagatePrioProcess= #PropagateResourceLimits= #PropagateResourceLimitsExcept= #Prolog= #Epilog= #SrunProlog= #SrunEpilog= #TaskProlog= #TaskEpilog= #TaskPlugin= #TrackWCKey=no #TreeWidth=50 #TmpFS= #UsePAM= # # GPU definition (Added by S 2022/11) GresTypes=gpu # TIMERS SlurmctldTimeout=300 SlurmdTimeout=300 InactiveLimit=0 MinJobAge=300 KillWait=30 Waittime=0 # # SCHEDULING SchedulerType=sched/backfill #SchedulerAuth= #SelectType=select/linear SelectType=select/cons_res # select partial node #SelectTypeParameters=CR_CPU_Memory SelectTypeParameters=CR_Core_Memory #FastSchedule=1 FastSchedule=0 PriorityType=priority/multifactor PriorityDecayHalfLife=0 PriorityUsageResetPeriod=NONE PriorityWeightFairshare=100000 #PriorityWeightAge=1000 PriorityWeightPartition=10000 #PriorityType=priority/multifactor #PriorityDecayHalfLife=14-0 #PriorityUsageResetPeriod=14-0 #PriorityWeightFairshare=100000 #PriorityWeightAge=1000 #PriorityWeightPartition=10000 #PriorityWeightJobSize=1000 #PriorityMaxAge=1-0 DefMemPerCPU=2000 # LOGGING SlurmctldDebug=3 SlurmctldLogFile=/var/log/slurmctld.log SlurmdDebug=3 SlurmdLogFile=/var/log/slurmd.log JobCompType=jobcomp/none #JobCompLoc= # # ACCOUNTING #JobAcctGatherType=jobacct_gather/linux #JobAcctGatherFrequency=30 # AccountingStorageType=accounting_storage/slurmdbd AccountingStorageHost=master #AccountingStorageLoc= #AccountingStoragePass= #AccountingStorageUser= # # COMPUTE NODES # OpenHPC default configuration # Edited by Surin 1399/11 #AccountingStorageEnforce=limits AccountingStorageEnforce=QOS,Limits,Associations #TaskPlugin=task/affinity #PropagateResourceLimitsExcept=MEMLOCK #AccountingStorageType=accounting_storage/filetxt Epilog=/etc/slurm/slurm.epilog.clean NodeName=cn0[1-5] NodeHostName=cn0[1-5] RealMemory=128307 Sockets=2 CoresPerSocket=16 ThreadsPerCore=2 Feature=HyperThread State=UNKNOWN NodeName=gp01 NodeHostName=gp01 RealMemory=128307 Sockets=2 CoresPerSocket=8 ThreadsPerCore=2 Feature=HyperThread Gres=gpu:4 State=UNKNOWN #PartitionName=all Nodes=cn0[1-5],gp01 MaxTime=INFINITE State=UP Oversubscribe=EXCLUSIVE PartitionName=all Nodes=cn0[1-5],gp01 MaxTime=10-00:00:00 State=UP MaxNodes=1 PartitionName=normal Nodes=cn0[1-5] Default=YES MaxTime=10-00:00:00 State=UP MaxNodes=1 #PartitionName=normal Nodes=cn0[1-5] Default=YES MaxTime=INFINITE State=UP Oversubscribe=EXCLUSIVE PartitionName=gpu Nodes=gp01 MaxTime=10-00:00:00 State=UP SlurmctldParameters=enable_configless ReturnToService=1 HealthCheckProgram=/usr/sbin/nhc HealthCheckInterval=300 ------------------------------------------- scontrol show node cn01 shows: NodeName=cn01 CoresPerSocket=16 CPUAlloc=0 CPUTot=64 CPULoad=N/A AvailableFeatures=HyperThread ActiveFeatures=HyperThread Gres=(null) NodeAddr=cn01 NodeHostName=cn01 RealMemory=128557 AllocMem=0 FreeMem=N/A Sockets=2 Boards=1 State=DOWN* ThreadsPerCore=2 TmpDisk=64278 Weight=1 Owner=N/A MCS_label=N/A Partitions=all,normal BootTime=None SlurmdStartTime=None CfgTRES=cpu=64,mem=128557M,billing=64 AllocTRES= CapWatts=n/a CurrentWatts=0 LowestJoules=0 ConsumedJoules=0 ExtSensorsJoules=n/s ExtSensorsWatts=0 ExtSensorsTemp=n/s Reason=undraining ------------------------------------------- "scontrol ping" also works as: Slurmctld(primary) at master.cluster... is UP ------------------------------------------- "systemctl start slurmd" shows: Job for slurmd.service failed because the control process exited with error code. See "systemctl status slurmd.service" and "journalctl -xe" for details. ------------------------------------------- "systemctl status slurmd.service" shows: ● slurmd.service - Slurm node daemon Loaded: loaded (/usr/lib/systemd/system/slurmd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Mon 2024-11-18 17:02:50 +0130; 41s ago Process: 219025 ExecStart=/usr/sbin/slurmd $SLURMD_OPTIONS (code=exited, status=1/FAILURE) Nov 18 17:02:50 master.cluster.... systemd[1]: Starting Slurm node daemon... Nov 18 17:02:50 master.cluster.... slurmd[219025]: fatal: Unable to determine this slurmd's NodeName Nov 18 17:02:50 master.cluster.... systemd[1]: slurmd.service: control process exited, code=exited status=1 Nov 18 17:02:50 master.cluster.... systemd[1]: Failed to start Slurm node daemon. Nov 18 17:02:50 master.cluster.... systemd[1]: Unit slurmd.service entered failed state. Nov 18 17:02:50 master.cluster.... systemd[1]: slurmd.service failed. ------------------------------------------- "journalctl -xe" output is: Nov 18 17:04:54 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:05:04 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:05:08 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:05:12 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:05:22 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:05:26 master.cluster.... dhcpd[2250]: DHCPDISCOVER from 70:35:09:f8:13:40 via eno2: network eno2: no free leases Nov 18 17:06:34 master.cluster.... munged[2514]: Purged 2 credentials from replay hash ------------------------------------------- slurmd.services contains the following information: [Unit] Description=Slurm node daemon After=munge.service network.target remote-fs.target ConditionPathExists=/etc/slurm/slurm.conf [Service] Type=forking EnvironmentFile=-/etc/sysconfig/slurmd ExecStart=/usr/sbin/slurmd $SLURMD_OPTIONS ExecReload=/bin/kill -HUP $MAINPID PIDFile=/var/run/slurmd.pid KillMode=process LimitNOFILE=131072 LimitMEMLOCK=infinity LimitSTACK=infinity Delegate=yes [Install] WantedBy=multi-user.target [root@master system]# which slurmd /usr/sbin/slurmd [root@master system]# cat slurmd.service [Unit] Description=Slurm node daemon After=munge.service network.target remote-fs.target ConditionPathExists=/etc/slurm/slurm.conf [Service] Type=forking EnvironmentFile=-/etc/sysconfig/slurmd ExecStart=/usr/sbin/slurmd $SLURMD_OPTIONS ExecReload=/bin/kill -HUP $MAINPID PIDFile=/var/run/slurmd.pid KillMode=process LimitNOFILE=131072 LimitMEMLOCK=infinity LimitSTACK=infinity Delegate=yes [Install] WantedBy=multi-user.target ------------------------------------------- For "which slurmd" command I get this address: /usr/sbin/slurm ------------------------------------------- ls -l /usr/sbin/slurmd shows: lrwxrwxrwx 1 root root 69 Nov 10 10:54 /usr/sbin/slurmd -> /install/centos7.9/compute_gpu/rootimg/usr/sbin/slurmd

1 0

InvalidAccount
by hmeij＠wesleyan.edu 18 Nov '24

18 Nov '24

Manual compilation of 24.05.4. slurmctld and slurmd run on same server. All works ok but all test jobs end up pending with InvalidAccount message. I do not use slurm database and have not enabled accounting. Can not find an answer for this behavior or a misconfiguration. slurm.conf file was generated using easy config tool. Any ideas how to fix this? Thx, -Henk ## looks like all users have access to test queue [hmeij@sharptail2 slurm]$ sinfo -o "%g %.10R %.20l" GROUPS PARTITION TIMELIMIT all test infinite [hmeij@sharptail2 slurm]$ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST test* up infinite 1 idle sharptail2 ## simple sleep job [hmeij@sharptail2 slurm]$ sbatch sleep Submitted batch job 8 [hmeij@sharptail2 slurm]$ squeue JOBID PARTITION NAME USER ST TIME NODES CPUS MIN_MEMORY NODELIST(REASON) 8 test sleep hmeij PD 0:00 1 1 1G (InvalidAccount) [hmeij@sharptail2 slurm]$ scontrol show job 8 JobId=8 JobName=sleep UserId=hmeij(8216) GroupId=its(623) MCS_label=N/A Priority=1 Nice=0 Account=(null) QOS=(null) JobState=PENDING Reason=InvalidAccount Dependency=(null) Requeue=1 Restarts=0 BatchFlag=1 Reboot=0 ExitCode=0:0 RunTime=00:00:00 TimeLimit=UNLIMITED TimeMin=N/A SubmitTime=2024-11-11T13:27:14 EligibleTime=2024-11-11T13:27:14 AccrueTime=2024-11-11T13:27:14 StartTime=Unknown EndTime=Unknown Deadline=N/A SuspendTime=None SecsPreSuspend=0 LastSchedEval=2024-11-11T13:27:14 Scheduler=Main Partition=test AllocNode:Sid=sharptail2:644662 ReqNodeList=(null) ExcNodeList=(null) NodeList= NumNodes=1-1 NumCPUs=1 NumTasks=1 CPUs/Task=1 ReqB:S:C:T=0:0:1:1 ReqTRES=cpu=1,mem=1G,node=1,billing=1 AllocTRES=(null) Socks/Node=1 NtasksPerN:B:S:C=1:0:*:* CoreSpec=* MinCPUsNode=1 MinMemoryNode=1G MinTmpDiskNode=0 Features=(null) DelayBoot=00:00:00 OverSubscribe=OK Contiguous=0 Licenses=(null) Network=(null) Command=/zfshomes/hmeij/slurm/sleep WorkDir=/zfshomes/hmeij/slurm StdErr=/zfshomes/hmeij/slurm/err StdIn=/dev/null StdOut=/zfshomes/hmeij/slurm/out TresPerTask=cpu=1 ## within a minute or so that InvalidAccount changes to None ( ## but job remains pending; 1-7 stuck over the weekend) [hmeij@sharptail2 slurm]$ squeue JOBID PARTITION NAME USER ST TIME NODES CPUS MIN_MEMORY NODELIST(REASON) 8 test sleep hmeij PD 0:00 1 1 1G (None) ## in the slurmctld.log slurmctld: sched: JobId=8 has invalid account slurmctld: debug: set_job_failed_assoc_qos_ptr: Filling in assoc for JobId=8 Assoc=0 slurmctld: debug: sched: Running job scheduler for full queue. slurmctld: error: _refresh_assoc_mgr_qos_list: no new list given back keeping cached one. ##and the slurm.conf accounting section (both AccountingStorageType lines yield same behavior) #AccountingStorageType= AccountingStorageType=accounting_storage/none #JobAcctGatherFrequency=30 #JobAcctGatherType= ## using SchedulerType = sched/builtin

3 5

Listen to job state changes
by egonle＠posteo.me 18 Nov '24

18 Nov '24

Hello, is there any way to listen to job state changes of slurm 23.x or newer? I’d like to kind of subscribe to job state changes instead of polling for job states. Adding this feature to slurm accounting DB seems to be last option right now, although I’d like to avoid it. Thanks&Best Egonle

4 3

How to power up all ~idle nodes and verify that they have started up without issue programmatically
by Xaver Stiensmeier 15 Nov '24

15 Nov '24

Dear Slurm User list, I would like to startup all ~idle (idle and powered down) nodes and check programmatically if all came up as expected. For context: this is for a program that sets up slurm clusters with on demand cloud scheduling. In the most easiest fashion this could be executing a command like *srun FORALL hostname* which would return the names of the nodes if it succeeds and an error message otherwise. However, there's no such input value like FORALL as far as I am aware. One could use -N{total node number} as all nodes are ~idle when this executes, but I don't know an easy way to get the total number of nodes. Best regards, Xaver

3 5

First setup of slurm with a GPU node
by Patrick Begou 13 Nov '24

13 Nov '24

Hi, I'm using slurm on a small 8 nodes cluster. I've recently added one GPU node with two Nvidia A100, one with 40Gb of RAM and one with 80Gb. As using this GPU resource increase I would like to manage this resource with Gres to avoid usage conflict. But at this time my setup do not works as I can reach a GPU without reserving it: srun -n 1 -p tenibre-gpu ./a.out can use a GPU even if the reservation do not specify this resource (checked with running nvidia-smi on the node). "tenibre-gpu" is a slurm partition with only this gpu node. From the documentation I've created a gres.conf file and it is propagated on all the nodes (9 compute nodes, 1 login node and the management node) and slurmd has been restarted. gres.conf is:* ## GPU setup on tenibre-gpu-0 NodeName=tenibre-gpu-0 Name=gpu Type=A100-40 File=/dev/nvidia0 Flags=nvidia_gpu_env NodeName=tenibre-gpu-0 Name=gpu Type=A100-80 File=/dev/nvidia1 Flags=nvidia_gpu_env * * In slurm.conf I have checked these flags: ## Basic scheduling SelectTypeParameters=CR_Core_Memory SchedulerType=sched/backfill SelectType=select/cons_tres ## Generic resources GresTypes=gpu ## Nodes list .... Nodename=tenibre-gpu-0 RealMemory=257270 Sockets=2 CoresPerSocket=16 ThreadsPerCore=1 State=UNKNOWN .... #partitions PartitionName=tenibre-gpu MaxTime=48:00:00 DefaultTime=12:00:00 DefMemPerCPU=4096 MaxMemPerCPU=8192 Shared=YES State=UP Nodes=tenibre-gpu-0 ... May be I've missed something ? I'm running Slurm 20.11.7-1. Thanks for your advices. Patrick

5 6

Slurm and NVIDIA NVML
by Matthias Leopold 13 Nov '24

13 Nov '24

Hi, I'm trying to compile Slurm with NVIDIA NVML support, but the result is unexpected. I get /usr/lib/x86_64-linux-gnu/slurm/gpu_nvml.so, but when I do "ldd /usr/lib/x86_64-linux-gnu/slurm/gpu_nvml.so" there is no reference to /lib/x86_64-linux-gnu/libnvidia-ml.so.1 (which I would expect). ~$ ldd /usr/lib/x86_64-linux-gnu/slurm/gpu_nvml.so linux-vdso.so.1 (0x00007ffd9a3f4000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f0bc2c06000) /lib64/ld-linux-x86-64.so.2 (0x00007f0bc2e47000) /lib/x86_64-linux-gnu/libnvidia-ml.so.1 is present during compilation. Also I can see that NVML headers where found in config.status (else I wouldn't get gpu_nvml.so at all to my understanding). Our old cluster was deployed with NVIDIA deepops (which compiles Slurm on every node) and also has NVML support. There ldd brings the expected result ~$ ldd /usr/local/lib/slurm/gpu_nvml.so ... libnvidia-ml.so.1 => /lib/x86_64-linux-gnu/libnvidia-ml.so.1 (0x00007f3b10120000) ... I can't test actual functionality with my new binaries because I don't have a node with GPUs yet. Am I missing something? thank you Matthias

2 2

Slurm release candidate version 24.11.0rc1 available for testing
by Marshall Garey 12 Nov '24

12 Nov '24

We are pleased to announce the availability of Slurm release candidate 24.11.0rc1. To highlight some new features coming in 24.11: - New gpu/nvidia plugin. This does not rely on any NVIDIA libraries, and will build by default on all systems. It supports basic GPU detection and management, but cannot currently identify GPU-to-GPU links, or provide usage data as these are not exposed by the kernel driver. - Add autodetected GPUs to the output from "slurmd -C". - Added new QOS-based reports to "sreport". - Revamped network I/O with the "conmgr" thread-pool model. - Added new "hostlist function" syntax for management commands and configuration files. - switch/hpe_slingshot - Added support for hardware collectives setup through the fabric manager. (Requires SlurmctldParameters=enable_stepmgr) - Added SchedulerParameters=bf_allow_magnetic_slot configuration option to allow backfill planning for magnetic reservations. - Added new "scontrol listjobs" and "liststeps" commands to complement "listpids", and provide --json/--yaml output for all three subcommands. - Allow jobs to be submitted against multiple QOSes. - Added new experimental "oracle" backfill scheduling support, which permits jobs to be delayed if the oracle function determines the reduced fragmentation of the network topology is sufficiently advantageous. - Improved responsiveness of the controller when jobs are requeued by replacing the "db_index" identifier with a slurmctld-generated unique identifier. ("SLUID") - New options to job_container/tmpfs to permit site-specific scripts to modify the namespace before user steps are launched, and to ensure all steps are completely captured within that namespace. This is the first release candidate of the upcoming 24.11 release series, and represents the end of development for this release, and a finalization of the RPC and state file formats. If any issues are identified with this release candidate, please report them through https://bugs.schedmd.com against the 24.11.x version and we will address them before the first production 24.11.0 release is made. Please note that the release candidates are not intended for production use. A preview of the updated documentation can be found at https://slurm.schedmd.com/archive/slurm-master/ . Slurm can be downloaded from https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support

1 0

Container Problems with various oci.conf settings
by Jason Pascucci 12 Nov '24

12 Nov '24

Hi, I'm running on Ubuntu 20.04. I've got a clean configuration of slurmctld and slurmd on one node. 1) I've configured oci.conf to the defaults defined by "OCI.CONF EXAMPLE FOR RUNC USING RUN (RECOMMENDED OVER USING CREATE/START):". I have a container that I can run by hand: runc --rootless true run -b /opt/pilot_results/results.20241108-184831/step1 test sh-4.2# exit exit and it returns. However, when I srun --container=/opt/pilot_results/results.20241108-184831/step1 ls it hangs after completing the ls, and I have to double ctrl-c out of it. 2) I tried using the configuration for RUNC with Create/Start and it hangs on start. 3) I tried using the configuration for CRUN using RUN, I can run the container by hand with crun, but srun fails with: srun --container=/opt/pilot_results/results.20241108-194914/step1 bash bind socket to `/run/user/1008//pd-builds-bench-1.jrp.34.0.0/notify`: Address already in use sync socket closed srun: error: pd-builds-bench-1: task 0: Exited with exit code 1 4) I tried using the configuration for CRUN with Create/Start and it errors repeatedly with: slurmstepd: error: _get_container_state: RunTimeQuery failed rc:256 output:error opening file `/run/user/1008//pd-builds-bench-1.jrp.51.0.0/status`: No such file or directory I went through the (open and closed) support tickets and couldn't find anything that reflects any of these errors, and I'm pretty stuck at this point. Any help would be welcome. Thanks, JRP

1 0

slurmctld keeps segfaulting, possibly during or just after backfill
by Marcus Lauer 12 Nov '24

12 Nov '24

We are running into a problem where slurmctld is segfaulting a few times a day. We had this problem with SLURM 23.11.8 and now with 23.11.10 as well, though the problem only appears on one of the several SLURM clusters we have, and all of them use one of those versions of SLURM. I was wondering if anyone has encountered a similar issue and has any thoughts on how to prevent this. Obviously we use "SchedulerType=sched/backfill" but strangely when I switched to sched/builtin for a while there were still slurmctld segfaults. We also set "SchedulerParameters=enable_user_top,bf_max_job_test=2000". I have tried turning those off but it did not help. I have also tried tweaking several other settings to no avail. Most of the cluster runs Rocky Linux 8.10 (including the slurmctld system) though we still have some Scientific Linux 7.9 compute nodes (we compile SLURM separately for those). Here is the crash-time error from journalctl: Oct 02 06:31:20 our.host.name kernel: sched_agent[2048355]: segfault at 8 ip 00007fec755d7ea8 sp 00007fec6bffe7e8 error 4 in libslurmfull.so[7fec7555a000+1f4000] Oct 02 06:31:20 our.host.name kernel: Code: 48 39 c1 7e 19 48 c1 f8 06 ba 01 00 00 00 48 d3 e2 48 f7 da 48 0b 54 c6 10 48 21 54 c7 10 c3 b8 00 00 00 00 eb da 48 8b 4f 08 <48> 39 4e 08 48 0f 4e 4e 08 49 89 c9 48 83 f9 3f 76 4e ba 40 00 00 Oct 02 06:31:20 our.host.name systemd[1]: Started Process Core Dump (PID 2169426/UID 0). Oct 02 06:31:20 our.host.name systemd-coredump[2169427]: Process 2048344 ( slurmctld) of user 991 dumped core. This is followed by a list of each of the dozen or so related threads. The one which is dumping core is first and looks like this: Stack trace of thread 2048355: #0 0x00007fec755d7ea8 bit_and_not (libslurmfull.so) #1 0x000000000044531f _job_alloc (slurmctld) #2 0x000000000044576b _job_alloc_whole_node_internal (slurmctld) #3 0x0000000000446e6d gres_ctld_job_alloc_whole_node (slurmctld) #4 0x00007fec722e29b8 job_res_add_job (select_cons_tres.so) #5 0x00007fec722f7c32 select_p_select_nodeinfo_set (select_cons_tres.so) #6 0x00007fec756e7dc7 select_g_select_nodeinfo_set (libslurmfull.so) #7 0x0000000000496eb3 select_nodes (slurmctld) #8 0x0000000000480826 _schedule (slurmctld) #9 0x00007fec753421ca start_thread (libpthread.so.0) #10 0x00007fec745f78d3 __clone (libc.so.6) I have run slurmctld with "debug5" level logging and it appears that the error occurs right after backfill considers a large number of jobs. Slurmctld could be failing at the end of backfill or when doing something which happens just after backfill runs. Usually this is the last message before the crash: [2024-09-25T18:39:42.076] slurmscriptd: debug: _slurmscriptd_mainloop: finished If anyone has any thoughts or advice on this that would be appreciated. Thank you. -- Marcus Lauer Systems Administrator CETS Group, Research Support

2 2

The hostname resolution case sensitive
by Bill 11 Nov '24

11 Nov '24

Hi, I want to confirm that the hostname resolution is case sensitive in SLURM ? Many thanks, Bill

3 5

Discrepancy in GPU Hour Reporting Between sacct and sreport in SLURM
by Manisha Yadav 11 Nov '24

11 Nov '24

I am trying to find the GPU hour utilization for a user during a specific time period using the sacct and sreport commands. However, I am noticing a significant difference between the outputs of these two commands. Could you explain the reasons for this discrepancy? Are there specific factors or configurations in SLURM that could lead to variations in the reported GPU hours? There is a significant discrepancy in the results produced for GPU hour utilization by the sacct and sreport commands in SLURM Thanks, Manisha ------------------------------------------------------------------------------------------------------------ [ C-DAC is on Social-Media too. Kindly follow us at: Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ] This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. ------------------------------------------------------------------------------------------------------------

1 0

Access denied by pam_slurm_adopt
by John Hearns 10 Nov '24

10 Nov '24

I have cluster which uses Slurm 23.11.6 When I submit a multi-node job and run something like clush -b -w $SLURM_JOB_NODELIST "date" very often the ssh command fails with: Access denied by pam_slurm_adopt: you have no active jobs on this node This will happen maybe on 50% of the nodes There is the same behaviour of I salloc a number of nodes then try to ssh to a node. I have traced this to slurmstepd spawning a long sleep, which I believe allows proctrackd to 'see' if a job is active. On nodes that I can ssh into: root 3211 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmd --systemd root 3227 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmstepd infinity root 24322 1 0 15:40 ? 00:00:00 slurmstepd: [15709.extern] root 24326 24322 0 15:40 ? 00:00:00 \_ sleep 100000000 On nodes where I cannot ssh: root 3226 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmd --systemd root 3258 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmstepd infinity Maybe I am not understanding something here? ps. I ahve tried to run the pam_slurm_adopt module with options to debug, and have not found anything useful John H

2 2

Change primary alloc node
by Bhaskar Chakraborty 04 Nov '24

04 Nov '24

Hi, Is there a way to change/control the primary node (i.e. where the initial task starts) as part of a job's allocation. For eg, if a job requires 6 CPUs & its allocation is distributed over 3 hosts h1, h2 & h3 I find that it always starts the task in 1 particularnode (say h1) irrespective of how many slots were available in the hosts. Can we somehow let slurm have the primary node as h2? Is there any C-API inside select plugin which can do this trick if we were to control it through the configured select plugin? Thanks.-Bhaskar.

2 4

Slurm Job Sched Priority
by Bhaskar Chakraborty 03 Nov '24

03 Nov '24

Hello, Is there any DS in slurmctld which portrays the dynamic relative priority of pending jobs? We are trying to use slurm for developing a scheduling solution and 1 of the problems we face at the outset is how to determinethe order of scheduling for pending jobs. One option is to find scheduling iteration window begin & close pointers & cache the job ids as seen in order & then make them the priority order at that point of time. ( This means for 500 pending jobs, say, if we can find which are the slurmctld calls which mark the beginning & end of a sched iteration then we can use the scheduling orderof jobs as the relative priority order for that period of time, of course it may change depending on fairshare, user initiated priority modification etc. ) A concrete existing data structure showing the dynamic priority itself from slurmctld would be handy. Help appreciated. Thanks! Bhaskar.

3 4

Re: Change primary alloc node
by Bhaskar Chakraborty 31 Oct '24

31 Oct '24

Hello, Just to add some context here. We plan to use slurm for developing a sched solution which interacts with a backend system. Now, the backend system has pieces of h/w which require specific host in the allocation to be the primary/master host wherein the initial task would be launched, this in turn is driven by the job's placement orientation on the h/w itself. So, our primary task should launch in the asked primary host while secondary / remote tasks would subsequently get started on other hosts. Hope this brings some context to the problem as to why a specific host is necessary to be the starting host. Regards,Bhaskar. On Thursday 31 October, 2024 at 12:04:37 am IST, Laura Hild <lsh(a)jlab.org> wrote: I think if you tell the list why you care which of the Nodes is BatchHost, they may be able to provide you with a better solution. ________________________________________ Od: Bhaskar Chakraborty via slurm-users <slurm-users(a)lists.schedmd.com> Poslano: sreda, 30. oktober 2024 12:35 Za: slurm-users(a)schedmd.com Zadeva: [slurm-users] Change primary alloc node Hi, Is there a way to change/control the primary node (i.e. where the initial task starts) as part of a job's allocation. For eg, if a job requires 6 CPUs & its allocation is distributed over 3 hosts h1, h2 & h3 I find that it always starts the task in 1 particular node (say h1) irrespective of how many slots were available in the hosts. Can we somehow let slurm have the primary node as h2? Is there any C-API inside select plugin which can do this trick if we were to control it through the configured select plugin? Thanks. -Bhaskar.

3 2

Why AllowAccounts not work in slurm-23.11.6
by daijiangkuicgo＠gmail.com 30 Oct '24

30 Oct '24

I have set AllowAccounts=sunlabc5hpc,root, but it doesn’t seem to work. User c010637 is not part of the sunlabc5hpc account but is still able to use the sunlabc5hpc partition. I have tried setting EnforcePartLimits to ALL, ANY, and NO, but none of these options resolved the issue. [c010637@sl-login ~]$ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST cpu* up infinite 3 mix sl-c[0035,0042-0043] cpu* up infinite 1 idle sl-c0036 gpu up infinite 3 idle sl-c[0045-0047] sunlabc5hpc up infinite 1 idle sl-c0048 [c010637@sl-login ~]$ scontrol show partition sunlabc5hpc PartitionName=sunlabc5hpc AllowGroups=ALL AllowAccounts=sunlabc5hpc,root AllowQos=ALL AllocNodes=ALL Default=NO QoS=N/A DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=UNLIMITED MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED MaxCPUsPerSocket=UNLIMITED Nodes=sl-c0048 PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=OFF State=UP TotalCPUs=256 TotalNodes=1 SelectTypeParameters=NONE JobDefaults=(null) DefMemPerNode=UNLIMITED MaxMemPerNode=UNLIMITED TRES=cpu=256,mem=515000M,node=1,billing=256,gres/gpu=8 [c010637@sl-login ~]$ sacctmgr list assoc format=cluster,user,account%20,qos user=$USER Cluster User Account QOS ---------- ---------- -------------------- -------------------- snowhpc c010637 c010637_bank normal [c010637@sl-login ~]$ sacctmgr list account sunlabc5hpc Account Descr Org ---------- -------------------- -------------------- sunlabc5h+ sunlabc5hpc sunlabc5hpc [c010637@sl-login ~]$ sacctmgr show assoc where Account=sunlabc5hpc format=User,Account User Account ---------- ---------- sunlabc5h+ c010751 sunlabc5h+ snowdai sunlabc5h+

5 9

Re: 转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5?
by taleintervenor＠sjtu.edu.cn 30 Oct '24

30 Oct '24

Thanks for all your help. So it seems we can skip the trouble of compiling SLURM over different mariadb versions. Tianyang Zhang SJTU Network Information Center 发件人: Sid Young <sid.young(a)gmail.com> 发送时间: 2024年10月30日 7:19 收件人: Andrej Sec <andrej.sec(a)savba.sk> 抄送: taleintervenor(a)sjtu.edu.cn; slurm-users(a)lists.schedmd.com 主题: Re: [slurm-users] Re: 转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5? I recently upgraded from 20.11 to 24.05.2, before moving the cluster from CentOS 7.9 to Oracle Linux 8.10 The DB upgrade should be pretty simple, do a mysqldump first, then uninstall the old DB, change the repo's and install the new DB version. It should recognise the DB files on disk and access them. Do another DB backup on the new DB version. then roll through the Slurm upgrades. I picked the first and last version of each release, and systematically went through each node till it was done. First the slurm controller node, then the compute nodes. To avoid Job loss, drain the nodes or you end up with a situation where the slurmd can't talk to the running slurmstepd and the job(s) gets lost. (Shows as a "Protocol Error"). Ole sent me a link to this guide which mostly worked. https://wiki.fysik.dtu.dk/Niflheim_system/Slurm_installation/#upgrade-slurm… Sid Young W: https://off-grid-engineering.com On Tue, Oct 29, 2024 at 6:33 PM Andrej Sec via slurm-users <slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> > wrote: Hi, we are facing a similar task. We have a Slurm 22.05 / MariaDB 5.5.68 environment and want to upgrade to a newer version. According to the documentation, it’s recommended to upgrade from 22.05 to a maximum of 23.11 in one step. With the MariaDB upgrade, there’s a challenge between 10.1 and 10.2+ due to incompatible changes (https://mariadb.com/kb/en/changes-improvements-in-mariadb-10-2). This upgrade, as I understand from the documentation, requires at least slurm 22.05, where it is automatically handled by the slurmdbd service. In the test lab, we performed the following tests: a. Incremental upgrade - according to MariaDB recommendations: 1. Upgrade MariaDB 5.5.68 -> 10.1.48 -> 10.2.44 2. Start the Slurm suite 22.05, checking content after each MariaDB upgrade step. During the 10.1 -> 10.2 upgrade, the slurmdbd service automatically converted the database to the required format. We had enabled general.log in MariaDB, allowing detailed inspection of database changes during conversion. 3. Upgrade slurmdbd to version 23.11 4. Upgrade slurmctld to version 23.11 5. Upgrade slurmd to version 23.11 6. Check the database content and compare tests before and after the upgrade (we used various reports with scontrol, sreport, sacct, sacctmgr for verification). b. Direct MariaDB upgrade from 5.5.68 to 10.2.44 using the same approach. According to the tests, this resulted in the same state as the incremental approach. PS: If you proceed with the upgrade, I would appreciate it if you could let us know about any potential challenges you encountered. Andrej Sec nscc, Bratislava, Slovakia _____ Od: "hermes via slurm-users" <slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> > Komu: slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> Odoslané: pondelok, 28. október 2024 8:48:19 Predmet: [slurm-users] =?eucgb2312_cn?q?=D7=AA=B7=A2=3A_What_is_the_safe_upgrade_path_when_upgrade_from_slurm21=2E08_and_mariadb5=2E5=3F?= Hi everyone: We are currently running business on SLURM21.08 and mariadb5.5. When talking about the upgrade, we need to keep all the users and jobs history data. And we see the official document wrote: “When upgrading an existing accounting database to MariaDB 10.2.1 or later from an older version of MariaDB or any version of MySQL, ensure you are running slurmdbd 22.05.7 or later. These versions will gracefully handle changes to MariaDB default values that can cause problems for slurmdbd.” So is this mean we have to firstly build SLURM>22.05 over mariadb5.5, and do the SLURM upgrade. Then upgrade the mariadb to newer version, and rebuild the same version of SLURM over new mariadb-devel? And is it safe to jump directly from mariadb5.5 to latest version? How can we check whether the slurm have correctly inherited the historical data? Thanks, Tianyang Zhang SJTU Network Information Center -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com <mailto:slurm-users-leave@lists.schedmd.com> -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com <mailto:slurm-users-leave@lists.schedmd.com>

1 0

转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5?
by taleintervenor＠sjtu.edu.cn 29 Oct '24

29 Oct '24

Hi everyone: We are currently running business on SLURM21.08 and mariadb5.5. When talking about the upgrade, we need to keep all the users and jobs history data. And we see the official document wrote: “When upgrading an existing accounting database to MariaDB 10.2.1 or later from an older version of MariaDB or any version of MySQL, ensure you are running slurmdbd 22.05.7 or later. These versions will gracefully handle changes to MariaDB default values that can cause problems for slurmdbd.” So is this mean we have to firstly build SLURM>22.05 over mariadb5.5, and do the SLURM upgrade. Then upgrade the mariadb to newer version, and rebuild the same version of SLURM over new mariadb-devel? And is it safe to jump directly from mariadb5.5 to latest version? How can we check whether the slurm have correctly inherited the historical data? Thanks, Tianyang Zhang SJTU Network Information Center

3 2

Job pre / post submit scripts
by Bhaskar Chakraborty 29 Oct '24

29 Oct '24

Hi, Is there an option in slurm to launch a custom script at the time of job submission through sbatchor salloc? The script should run with submit user permission in submit area. The idea is that we need to enquire something which characterises our job’s requirement like CPUslots, memory etc from a central server and we do need read access to user area prior to that. In our use case the user doesn’t necessarily know beforehand what kind of resource his job needs.(Hence, the need for such a script which will contact the server with user area info.) Based on it we can modify the job a little later. A post submit script, if available, would inform us the slurm job id as well, it would get called just after the job has entered the system and prior to its scheduling. Thanks,Bhaskar. Sent from Yahoo Mail for iPad

4 4

Scheduling oddity with multiple GPU types in same partition
by Kevin M. Hildebrand 29 Oct '24

29 Oct '24

We have a 'gpu' partition with 30 or so nodes, some with A100s, some with H100s, and a few others. It appears that when (for example) all of the A100 GPUs are in use, if there are additional jobs requesting A100 GPUs pending, and those jobs have the highest priority in the partition, then jobs submitted for H100s won't run even if there are idle H100s. This is a small subset of our present pending queue- the four bottom jobs should be running, but aren't. The top pending job shows reason 'Resources' while the rest all show 'Priority'. Any thoughts on why this might be happening? JOBID PRIORITY TRES_ALLOC 8317749 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317750 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317745 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317746 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8338679 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338678 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338677 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338676 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 Thanks, Kevin -- Kevin Hildebrand University of Maryland Division of IT

2 1

I need to limit the number of jobs per user per partition
by Stephen Connolly 28 Oct '24

28 Oct '24

I am unable to limit the number of jobs per user per partition. I have searched the internet, the forums and the slurm documentation. I created a partition with a QOS having MaxJobsPU=1 and MaxJobsPA=1 Created a user stephen with account=stephen and MaxJobs=1 However if I sbatch a test job (sleep 180) multiple times they all run concurrently. I am at a loss of what else to do. Help would be very appreciated . Thank you -- Stephen Connolly JSI Data Systems Ltd 613-727-9353 stephen(a)jsidata.ca

2 1

jobs dropping
by Mihai Ciubancan 24 Oct '24

24 Oct '24

Hello, We are trying to run some PiconGPU codes on a machine with 8x100H, susing slurm. But the jobs don't run, and are not in the queue. In slurmd logs I have: [2024-10-24T09:50:40.934] CPU_BIND: _set_batch_job_limits: Memory extracted from credential for StepId=1079.batch job_mem_limit= 648000 [2024-10-24T09:50:40.934] Launching batch job 1079 for UID 1009 [2024-10-24T09:50:40.938] debug: acct_gather_energy/none: init: AcctGatherEnergy NONE plugin loaded [2024-10-24T09:50:40.938] debug: acct_gather_profile/none: init: AcctGatherProfile NONE plugin loaded [2024-10-24T09:50:40.938] debug: acct_gather_interconnect/none: init: AcctGatherInterconnect NONE plugin loaded [2024-10-24T09:50:40.938] debug: acct_gather_filesystem/none: init: AcctGatherFilesystem NONE plugin loaded [2024-10-24T09:50:40.939] debug: gres/gpu: init: loaded [2024-10-24T09:50:41.022] [1079.batch] debug: cgroup/v2: init: Cgroup v2 plugin loaded [2024-10-24T09:50:41.026] [1079.batch] debug: CPUs:192 Boards:1 Sockets:2 CoresPerSocket:48 ThreadsPerCore:2 [2024-10-24T09:50:41.026] [1079.batch] debug: jobacct_gather/cgroup: init: Job accounting gather cgroup plugin loaded [2024-10-24T09:50:41.026] [1079.batch] CPU_BIND: Memory extracted from credential for StepId=1079.batch job_mem_limit=648000 step_mem_limit=648000 [2024-10-24T09:50:41.027] [1079.batch] debug: laying out the 8 tasks on 1 hosts mihaigpu2 dist 2 [2024-10-24T09:50:41.027] [1079.batch] gres_job_state gres:gpu(7696487) type:(null)(0) job:1079 flags: [2024-10-24T09:50:41.027] [1079.batch] total_gres:8 [2024-10-24T09:50:41.027] [1079.batch] node_cnt:1 [2024-10-24T09:50:41.027] [1079.batch] gres_cnt_node_alloc[0]:8 [2024-10-24T09:50:41.027] [1079.batch] gres_bit_alloc[0]:0-7 of 8 [2024-10-24T09:50:41.027] [1079.batch] debug: Message thread started pid = 459054 [2024-10-24T09:50:41.027] [1079.batch] debug: Setting slurmstepd(459054) oom_score_adj to -1000 [2024-10-24T09:50:41.027] [1079.batch] debug: switch/none: init: switch NONE plugin loaded [2024-10-24T09:50:41.027] [1079.batch] debug: task/cgroup: init: core enforcement enabled [2024-10-24T09:50:41.027] [1079.batch] debug: task/cgroup: task_cgroup_memory_init: task/cgroup/memory: total:2063720M allowed:100%(enforced), swap:0%(permissive), max:100%(2063720M) max+swap:100%(4127440M) min:30M kmem:100%(2063720M permissive) min:30M [2024-10-24T09:50:41.027] [1079.batch] debug: task/cgroup: init: memory enforcement enabled [2024-10-24T09:50:41.027] [1079.batch] debug: task/cgroup: init: Tasks containment cgroup plugin loaded [2024-10-24T09:50:41.027] [1079.batch] cred/munge: init: Munge credential signature plugin loaded [2024-10-24T09:50:41.027] [1079.batch] debug: job_container/none: init: job_container none plugin loaded [2024-10-24T09:50:41.030] [1079.batch] debug: spank: opening plugin stack /etc/slurm/plugstack.conf [2024-10-24T09:50:41.030] [1079.batch] debug: task/cgroup: task_cgroup_cpuset_create: job abstract cores are '0-63' [2024-10-24T09:50:41.030] [1079.batch] debug: task/cgroup: task_cgroup_cpuset_create: step abstract cores are '0-63' [2024-10-24T09:50:41.030] [1079.batch] debug: task/cgroup: task_cgroup_cpuset_create: job physical CPUs are '0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,96,98,100,102,104,106,108,110,112,114,116,118,120,122,124,126,128,130,132,134,136,138,140,142,144,146,148,150,152,154,156,158' [2024-10-24T09:50:41.030] [1079.batch] debug: task/cgroup: task_cgroup_cpuset_create: step physical CPUs are '0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,96,98,100,102,104,106,108,110,112,114,116,118,120,122,124,126,128,130,132,134,136,138,140,142,144,146,148,150,152,154,156,158' [2024-10-24T09:50:41.031] [1079.batch] task/cgroup: _memcg_initialize: job: alloc=648000MB mem.limit=648000MB memsw.limit=unlimited [2024-10-24T09:50:41.031] [1079.batch] task/cgroup: _memcg_initialize: step: alloc=648000MB mem.limit=648000MB memsw.limit=unlimited [2024-10-24T09:50:41.064] [1079.batch] debug levels are stderr='error', logfile='debug', syslog='quiet' [2024-10-24T09:50:41.064] [1079.batch] starting 1 tasks [2024-10-24T09:50:41.064] [1079.batch] task 0 (459058) started 2024-10-24T09:50:41 [2024-10-24T09:50:41.069] [1079.batch] _set_limit: RLIMIT_NOFILE : reducing req:1048576 to max:131072 [2024-10-24T09:51:23.066] debug: _rpc_terminate_job: uid = 64030 JobId=1079 [2024-10-24T09:51:23.067] debug: credential for job 1079 revoked [2024-10-24T09:51:23.067] [1079.batch] debug: Handling REQUEST_SIGNAL_CONTAINER [2024-10-24T09:51:23.067] [1079.batch] debug: _handle_signal_container for StepId=1079.batch uid=64030 signal=18 [2024-10-24T09:51:23.068] [1079.batch] Sent signal 18 to StepId=1079.batch [2024-10-24T09:51:23.068] [1079.batch] debug: Handling REQUEST_SIGNAL_CONTAINER [2024-10-24T09:51:23.068] [1079.batch] debug: _handle_signal_container for StepId=1079.batch uid=64030 signal=15 [2024-10-24T09:51:23.068] [1079.batch] error: *** JOB 1079 ON mihaigpu2 CANCELLED AT 2024-10-24T09:51:23 *** [2024-10-24T09:51:23.069] [1079.batch] Sent signal 15 to StepId=1079.batch [2024-10-24T09:51:23.069] [1079.batch] debug: Handling REQUEST_STATE [2024-10-24T09:51:23.071] [1079.batch] task 0 (459058) exited. Killed by signal 15. [2024-10-24T09:51:23.090] [1079.batch] debug: Handling REQUEST_STATE [2024-10-24T09:51:23.141] [1079.batch] debug: Handling REQUEST_STATE [2024-10-24T09:51:23.241] [1079.batch] debug: Handling REQUEST_STATE [2024-10-24T09:51:23.741] [1079.batch] debug: Handling REQUEST_STATE [2024-10-24T09:51:24.073] [1079.batch] debug: signaling condition [2024-10-24T09:51:24.073] [1079.batch] debug: jobacct_gather/cgroup: fini: Job accounting gather cgroup plugin unloaded [2024-10-24T09:51:24.073] [1079.batch] debug: task/cgroup: fini: Tasks containment cgroup plugin unloaded [2024-10-24T09:51:24.073] [1079.batch] debug: get_exit_code task 0 killed by cmd [2024-10-24T09:51:24.073] [1079.batch] job 1079 completed with slurm_rc = 0, job_rc = 15 [2024-10-24T09:51:24.075] [1079.batch] debug: Message thread exited [2024-10-24T09:51:24.154] [1079.batch] done with job Anyone have any idea what could be the problem? Thank you, Mihai

2 1

Randomly draining nodes
by Nacereddine Laddaoui 24 Oct '24

24 Oct '24

Hello everyone, I’ve recently encountered an issue where some nodes in our cluster enter a drain state randomly, typically after completing long-running jobs. Below is the output from the |sinfo| command showing the reason *“Prolog error”* : |root@controller-node:~# sinfo -R REASON USER TIMESTAMP NODELIST Prolog error slurm 2024-09-24T21:18:05 node[24,31] | When checking the |slurmd.log| files on the nodes, I noticed the following errors: |[2024-09-24T17:18:22.386] [217703.extern] error: _handle_add_extern_pid_internal: Job 217703 can't add pid 3311892 to jobacct_gather plugin in the extern_step. **(repeated 90 times)** [2024-09-24T17:18:22.917] [217703.extern] error: _handle_add_extern_pid_internal: Job 217703 can't add pid 3313158 to jobacct_gather plugin in the extern_step. ... [2024-09-24T21:17:45.162] launch task StepId=217703.0 request from UID:54059 GID:1600 HOST:<SLURMCTLD_IP> PORT:53514 [2024-09-24T21:18:05.166] error: Waiting for JobId=217703 REQUEST_LAUNCH_PROLOG notification failed, giving up after 20 sec [2024-09-24T21:18:05.166] error: slurm_send_node_msg: [(null)] slurm_bufs_sendto(msg_type=RESPONSE_SLURM_RC_MSG) failed: Unexpected missing socket error [2024-09-24T21:18:05.166] error: _rpc_launch_tasks: unable to send return code to address:port=<SLURMCTLD_IP>:53514 msg_type=6001: No such file or directory | If you know how to solve these errors, please let me know. I would greatly appreciate any guidance or suggestions for further troubleshooting. Thank you in advance for your assistance. Best regards, -- Télécom Paris <https://www.telecom-paris.fr> *Nacereddine LADDAOUI* Ingénieur de Recherche et de Développement 19 place Marguerite Perey CS 20031 91123 Palaiseau Cedex Site web Télécom Paris <https://www.telecom-paris.fr>X Télécom Paris <https://twitter.com/TelecomParis_>Facebook Télécom Paris <https://www.facebook.com/TelecomParis>LinkedIn Télécom Paris <https://www.linkedin.com/school/telecom-paris/>Instagram Télécom Paris <https://www.instagram.com/telecom_paris/>Blog Télécom Paris <https://imtech.wp.imt.fr> Une école de l'IMT <https://www.imt.fr>

6 9

loss of "unchangeable" node features
by Laura Hild 23 Oct '24

23 Oct '24

Has anyone else noticed, somewhere between versions 22.05.11 and 23.11.9, losing fixed Features defined for a node in slurm.conf, and instead now just having those controlled by a NodeFeaturesPlugin like node_features/knl_generic?

1 0

Slurm version 24.05.4 is now available (CVE-2024-48936)
by Tim Wickberg 23 Oct '24

23 Oct '24

Slurm version 24.05.4 is now available and includes a fix for a recently discovered security issue with the new stepmgr subsystem. SchedMD customers were informed on October 9th and provided a patch on request; this process is documented in our security policy. [1] A mistake in authentication handling in stepmgr could permit an attacker to execute processes under other users' jobs. This is limited to jobs explicitly running with --stepmgr, or on systems that have globally enabled stepmgr through "SlurmctldParameters=enable_stepmgr" in their configuration. CVE-2024-48936. Downloads are available at https://www.schedmd.com/downloads.php . Release notes follow below. - Tim [1] https://www.schedmd.com/security-policy/ -- Tim Wickberg Chief Technology Officer, SchedMD LLC Commercial Slurm Development and Support > * Changes in Slurm 24.05.4 > ========================== > -- Fix generic int sort functions. > -- Fix user look up using possible unrealized uid in the dbd. > -- Fix FreeBSD compile issue with tls/none plugin. > -- slurmrestd - Fix regressions that allowed slurmrestd to be run as SlurmUser > when SlurmUser was not root. > -- mpi/pmix fix race conditions with het jobs at step start/end which could > make srun to hang. > -- Fix not showing some SelectTypeParameters in scontrol show config. > -- Avoid assert when dumping removed certain fields in JSON/YAML. > -- Improve how shards are scheduled with affinity in mind. > -- Fix MaxJobsAccruePU not being respected when MaxJobsAccruePA is set > in the same QOS. > -- Prevent backfill from planning jobs that use overlapping resources for the > same time slot if the job's time limit is less than bf_resolution. > -- Fix memory leak when requesting typed gres and --[cpus|mem]-per-gpu. > -- Prevent backfill from breaking out due to "system state changed" every 30 > seconds if reservations use REPLACE or REPLACE_DOWN flags. > -- slurmrestd - Make sure that scheduler_unset parameter defaults to true even > when the following flags are also set: show_duplicates, skip_steps, > disable_truncate_usage_time, run_away_jobs, whole_hetjob, > disable_whole_hetjob, disable_wait_for_result, usage_time_as_submit_time, > show_batch_script, and or show_job_environment. Additionaly, always make > sure show_duplicates and disable_truncate_usage_time default to true when > the following flags are also set: scheduler_unset, scheduled_on_submit, > scheduled_by_main, scheduled_by_backfill, and or job_started. This effects > the following endpoints: > 'GET /slurmdb/v0.0.40/jobs' > 'GET /slurmdb/v0.0.41/jobs' > -- Ignore --json and --yaml options for scontrol show config to prevent mixing > output types. > -- Fix not considering nodes in reservations with Maintenance or Overlap flags > when creating new reservations with nodecnt or when they replace down nodes. > -- Fix suspending/resuming steps running under a 23.02 slurmstepd process. > -- Fix options like sprio --me and squeue --me for users with a uid greater > than 2147483647. > -- fatal() if BlockSizes=0. This value is invalid and would otherwise cause the > slurmctld to crash. > -- sacctmgr - Fix issue where clearing out a preemption list using > preempt='' would cause the given qos to no longer be preempt-able until set > again. > -- Fix stepmgr creating job steps concurrently. > -- data_parser/v0.0.40 - Avoid dumping "Infinity" for NO_VAL tagged "number" > fields. > -- data_parser/v0.0.41 - Avoid dumping "Infinity" for NO_VAL tagged "number" > fields. > -- slurmctld - Fix a potential leak while updating a reservation. > -- slurmctld - Fix state save with reservation flags when a update fails. > -- Fix reservation update issues with parameters Accounts and Users, when > using +/- signs. > -- slurmrestd - Don't dump warning on empty wckeys in: > 'GET /slurmdb/v0.0.40/config' > 'GET /slurmdb/v0.0.41/config' > -- Fix slurmd possibly leaving zombie processes on start up in configless when > the initial attempt to fetch the config fails. > -- Fix crash when trying to drain a non-existing node (possibly deleted > before). > -- slurmctld - fix segfault when calculating limit decay for jobs with an > invalid association. > -- Fix IPMI energy gathering with multiple sensors. > -- data_parser/v0.0.39 - Remove xassert requiring errors and warnings to have a > source string. > -- slurmrestd - Prevent potential segfault when there is an error parsing an > array field which could lead to a double xfree. This applies to several > endpoints in data_parser v0.0.39, v0.0.40 and v0.0.41. > -- scancel - Fix a regression from 23.11.6 where using both the --ctld and > --sibling options would cancel the federated job on all clusters instead of > only the cluster(s) specified by --sibling. > -- accounting_storage/mysql - Fix bug when removing an association > specified with an empty partition. > -- Fix setting multiple partition state restore on a job correctly. > -- Fix difference in behavior when swapping partition order in job submission. > -- Fix security issue in stepmgr that could permit an attacker to execute > processes under other users' jobs. CVE-2024-48936.

1 0

HOST CPUs not used by jobs
by Bhaskar Chakraborty 21 Oct '24

21 Oct '24

I have a SLURM configuration of 2 hosts with 6 + 4 CPUs. I am submitting jobs with sbatch -n <CPU slots> <job script>. However, I see that even when I have exhausted all 10 CPU slots for the running jobs it's still allowing subsequent jobs to run ! The CPU slots availability is also show as full for the 2 hosts. No job is found pending. What could be problem? My Slurm.conf looks like (host names are changed to generic): ClusterName=MyClusterControlMachine=host1ControlAddr=<some address>SlurmUser=slurmsa#AuthType=auth/mungeStateSaveLocation=/var/spool/slurmdSlurmdSpoolDir=/var/spool/slurmdSlurmctldLogFile=/var/log/slurm/slurmctld.logSlurmdDebug=3SlurmctldDebug=6SlurmdLogFile=/var/log/slurm/slurmd.logAccountingStorageType=accounting_storage/slurmdbdAccountingStorageHost=host1#AccountingStoragePass=medslurmpass#AccountingStoragePass=/var/run/munge/munge.socket.2AccountingStorageUser=slurmsa#TaskPlugin=task/cgroupNodeName=host1 CPUs=6 SocketsPerBoard=3 CoresPerSocket=2 ThreadsPerCore=1 State=UNKNOWNNodeName=host2 CPUs=4 ThreadsPerCore=1 State=UNKNOWNPartitionName=debug Nodes=host1,host2 Default=YES MaxTime=INFINITE State=UPJobAcctGatherType=jobacct_gather/linuxJobAcctGatherFrequency=30 SelectType=select/cons_tresSelectTypeParameters=CR_CPUTaskPlugin=task/affinity Thanks in advance for any help! Regards,Bhaskar.

2 1

Customization of (error) messages after the job submission
by Sebastian Sitkiewicz 21 Oct '24

21 Oct '24

Dear SLUR Users and Administrators, I am interested in a way to customize the job submission exit statuses (mainly error codes) after the job has already been queued by the SLURM controller. We aim to provide more user-friendly messages and reminders in case of any errors or obstacles (also adjusted to our QoS/account system). For example, in the case of exceeding CPU minutes of given QoS (or account) and after the (successful) job submission, we would like to notify the user that his job has been queued (as it should) but won’t start until the CPU minutes limits are increased (and that he should contact the administrators to apply for more resources). Similarly, if the user queued a job that cannot be launched immediately because of exceeding the MaxJobs limit (per user), we would like to also give him some additional message after the srun/sbatch submission. We want to provide such information immediately after the job submission, without the need to check the status using `squeue` by the user. In the Job Launch Guide (https://slurm.schedmd.com/job_launch.html) there are distinguished following steps: 1. Call job_submit plugins to modify the request as appropriate 2. Validate that the options are valid for this user (e.g. valid partition name, valid limits, etc.) 3. Determine if this job is the highest priority runnable job, if so then really try to allocate resources for it now, otherwise only validate that it could run if no other jobs existed 4. Determine which nodes could be used for the job. If the feature specification uses an exclusive OR option, then multiple iterations of the selection process below will be required with disjoint sets of nodes 5. Call the select plugin to select the best resources for the request 6. The select plugin will consider network topology and the topology within a node (e.g. sockets, cores, and threads) to select the best resources for the job 7. If the job can not be initiated using available resources and preemption support is configured, the select plugin will also determine if the job can be initiated after preempting lower priority jobs. If so then initiate preemption as needed to start the job. From my understanding, to achieve our goal one would need to have access to source code or plugin related to point 2 (and some part of point 3). Unfortunately, the job_submit (lua) plugin from point 1 (and the cli_filter plugin as well) cannot be used because it only has access to the information on the parameters of the submitted job and the SLURM partitions (but not the QoS/account usage and their limits). Is there any way to extend the customization of job submission to include such features? Best regards, Sebastian -- dr inż. Sebastian Sitkiewicz Politechnika Wrocławska Wrocławskie Centrum Sieciowo-Superkomputerowe Dział Usług Obliczeniowych Wyb. Wyspiańskiego 27 50-370 Wrocław www.wcss.pl

1 0

Tracking costs - one single pool of credits, variable costs per partition
by John Snowdon 18 Oct '24

18 Oct '24

We are trying to design the charging and accounting system for our new institutional HPC facility and I'm having difficulty understanding exactly how we can use sacctmgr to achieve what we need. Until now, our previous HPC facilities have all operated as free delivery and we have not needed to track costs by user/group/project. Account codes have been purely optional. However, our new facility will be split into various resource types, with free partitions and paid/priority/reserved partitions across those resource types. All jobs will need to be submitted with an account code. For users submitting to 'free' partitions we don't need to track resource units against a balance, but the submitted account code would still be used for reporting purposes (i.e. "free resources accounted for % of all use by this project in August-September"). When submitting to a 'paid' partition, the account code needs to be checked to ensure it has a positive balance (or a balance that will not go past some negative threshold). Each of the 'paid' partitions may (will) have a different resource unit cost. A simple example: - Submit to a generic CPU paid partition -- 1 resource unit/token/credit/£/$ per allocated cpu, per hour of compute - Submit to a high-speed, non-blocking CPU paid partition -- 2 resource unit/token/credit/£/$ per allocated cpu, per hour of compute - Submit to a GPU paid partition -- 4 resource unit/token/credit/£/$ per allocated GPU card, per hour of compute We need to have *one* pool of resource units/tokens/credits per account - let's say 1000 credits, and a group of users may well decide to spend all of their credits on the generic CPU partition, all on the GPU partition, or some mixture of the two. So in the above examples, assuming one user (or group of users sharing the same account code) submit a 2 hour job to all three partitions, their one, single account code should be charged: - 2 units for the generic CPU partition - 4 units for the job on the low latency partition - 8 units for the gpu partition. - A total of 14 credits removed from their single account code Is this feasible to achieve without having to allocate credits to each of the partitions for an account, or creating a QOS variant for each and every combination of account and partition? John Snowdon Senior Research Infrastructure Engineer (HPC) Research Software Engineering Catalyst Building, Room 2.01 Newcastle University 3 Science Square Newcastle Helix Newcastle upon Tyne NE4 5TG https://rse.ncldata.dev/

2 1

How do you guys track which GPU is used by which job ?
by Sylvain MARET 18 Oct '24

18 Oct '24

Hey guys ! I'm looking to improve GPU monitoring on our cluster. I want to install this https://github.com/NVIDIA/dcgm-exporter and saw in the README that it can support tracking of job id : https://github.com/NVIDIA/dcgm-exporter?tab=readme-ov-file#enabling-hpc-job… However I haven't been able to see any examples on how to do it nor does slurm seem to expose this information by default. Does anyone do this here ? And if so do you have any examples I could try to follow ? If you have advise on best practices to monitor GPU I'd be happy to hear it out ! Regards, Sylvain Maret

5 6

Job information is not being added to accounting database on new setup
by Adrian Brady 17 Oct '24

17 Oct '24

Hi Everyone, I'm a new to slurm administration and looking for a bit of help! Just added Accounting to an existing cluster but job information is not being added to the Accounting Mariadb. When I submit a test job it gets scheduled fine and its visible with squeue, I get nothing returned from sacct! I have turned up the logging to debug5 on both slurmctld and slurmdbd logs and can't see any errors. I believe all the comms are ok between slurmctld and slurmdbd as when I enter the sacct command I can see the database is being queried but returning nothing, because nothing has been added to the tables. The cluster tables were created fine when I ran #sacctmgr add cluster ny5ktt $ sacct JobID JobName Partition Account AllocCPUS State ExitCode ------------ ---------- ---------- ---------- ---------- ---------- -------- # tail -f slurmdbd.log [2024-10-17T12:34:45.232] debug: REQUEST_PERSIST_INIT: CLUSTER:ny5ktt VERSION:9216 UID:10001 IP:10.202.233.117 CONN:10 [2024-10-17T12:34:45.232] debug2: accounting_storage/as_mysql: acct_storage_p_get_connection: acct_storage_p_get_connection: request new connection 1 [2024-10-17T12:34:45.233] debug2: Attempting to connect to localhost:3306 [2024-10-17T12:34:45.274] debug2: DBD_GET_JOBS_COND: called [2024-10-17T12:34:45.317] debug2: DBD_FINI: CLOSE:1 COMMIT:0 [2024-10-17T12:34:45.317] debug4: accounting_storage/as_mysql: acct_storage_p_commit: got 0 commits The Mariadb is running on it own node with slurmdbd and munged for authentication. I haven't setup any accounts, users, asssociations or enforcements yet. On my lab cluster, jobs were visible in the database without these being setup. I guess I must be missing something simple in the config that is stopping jobs being reported to slurmdbd. Master Node packages # rpm -qa |grep slurm slurm-slurmdbd-20.11.9-1.el8.x86_64 slurm-libs-20.11.9-1.el8.x86_64 slurm-20.11.9-1.el8.x86_64 slurm-slurmd-20.11.9-1.el8.x86_64 slurm-perlapi-20.11.9-1.el8.x86_64 slurm-doc-20.11.9-1.el8.x86_64 slurm-contribs-20.11.9-1.el8.x86_64 slurm-slurmctld-20.11.9-1.el8.x86_64 Database Node packages # rpm -qa |grep slurm slurm-slurmdbd-20.11.9-1.el8.x86_64 slurm-20.11.9-1.el8.x86_64 slurm-libs-20.11.9-1.el8.x86_64 slurm-devel-20.11.9-1.el8.x86_64 slurm.conf # # See the slurm.conf man page for more information. # ClusterName=ny5ktt ControlMachine=ny5-pr-kttslurm-01 ControlAddr=10.202.233.71 #BackupController= #BackupAddr= # AuthType=auth/munge #CheckpointType=checkpoint/none CryptoType=crypto/munge #DisableRootJobs=NO #EnforcePartLimits=NO #Epilog= #EpilogSlurmctld= #FirstJobId=1 #MaxJobId=999999 #GresTypes= #GroupUpdateForce=0 #GroupUpdateTime=600 #JobCheckpointDir=/var/slurm/checkpoint #JobCredentialPrivateKey= #JobCredentialPublicCertificate= #JobFileAppend=0 #JobRequeue=1 #JobSubmitPlugins= #KillOnBadExit=0 #LaunchType=launch/slurm #Licenses=foo*4,bar MailProg=/bin/true MaxJobCount=200000 #MaxStepCount=40000 #MaxTasksPerNode=128 MpiDefault=none #MpiParams=ports=#-# #PluginDir= #PlugStackConfig= #PrivateData=jobs ProctrackType=proctrack/cgroup #Prolog= #PrologFlags= #PrologSlurmctld= #PropagatePrioProcess=0 #PropagateResourceLimits= #PropagateResourceLimitsExcept= #RebootProgram= ReturnToService=1 #SallocDefaultCommand= SlurmctldPidFile=/var/run/slurm/slurmctld.pid SlurmctldPort=6817 SlurmdPidFile=/var/run/slurm/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurm/d SlurmUser=slurm #SlurmdUser=root #SrunEpilog= #SrunProlog= StateSaveLocation=/var/spool/slurm/ctld SwitchType=switch/none #TaskEpilog= TaskPlugin=task/none #TaskPluginParam= #TaskProlog= #TopologyPlugin=topology/tree #TmpFS=/tmp #TrackWCKey=no #TreeWidth= #UnkillableStepProgram= #UsePAM=0 # # # TIMERS #BatchStartTimeout=10 #CompleteWait=0 #EpilogMsgTime=2000 #GetEnvTimeout=2 #HealthCheckInterval=0 #HealthCheckProgram= InactiveLimit=0 KillWait=30 #MessageTimeout=10 #ResvOverRun=0 #MinJobAge=300 #MinJobAge=43200 # CHG0057915 MinJobAge=14400 # CHG0057915 #MaxJobCount=50000 #MaxJobCount=100000 #OverTimeLimit=0 SlurmctldTimeout=120 SlurmdTimeout=300 #UnkillableStepTimeout=60 #VSizeFactor=0 Waittime=0 # # # SCHEDULING DefMemPerCPU=3000 #FastSchedule=1 #MaxMemPerCPU=0 #SchedulerTimeSlice=30 SchedulerType=sched/backfill SelectType=select/cons_tres #SelectTypeParameters=CR_Core #SelectTypeParameters=CR_CPU SelectTypeParameters=CR_CPU_Memory # ECR CHG0056915 10/14/2023 MaxArraySize=5001 # # # JOB PRIORITY #PriorityFlags= #PriorityType=priority/basic #PriorityDecayHalfLife= #PriorityCalcPeriod= #PriorityFavorSmall= #PriorityMaxAge= #PriorityUsageResetPeriod= #PriorityWeightAge= #PriorityWeightFairshare= #PriorityWeightJobSize= #PriorityWeightPartition= #PriorityWeightQOS= # # # LOGGING AND ACCOUNTING #AccountingStorageEnforce=0 #AccountingStorageEnforce=limits AccountingStorageHost=ny5-pr-kttslurmdb-01.ktt.schonfeld.com #AccountingStorageLoc= #AccountingStoragePass= #AccountingStoragePort= #AccountingStorageType=accounting_storage/none AccountingStorageType=accounting_storage/slurmdbd #AccountingStorageUser= AccountingStoreJobComment=YES #DebugFlags= #JobCompHost= #JobCompLoc= #JobCompPass= #JobCompPort= JobCompType=jobcomp/none #JobCompUser= #JobContainerType=job_container/none JobAcctGatherFrequency=60 JobAcctGatherType=jobacct_gather/none SlurmctldDebug=info SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmdLogFile=/var/log/slurm/slurmd.log #SlurmdLogFile= #SlurmSchedLogFile= #SlurmSchedLogLevel= # # # POWER SAVE SUPPORT FOR IDLE NODES (optional) #SuspendProgram= #ResumeProgram= #SuspendTimeout= #ResumeTimeout= #ResumeRate= #SuspendExcNodes= #SuspendExcParts= #SuspendRate= #SuspendTime= # # # COMPUTE NODES ##using fqdn since the ctld domain is different. Can't use regex since it's not at the end ##save 17 and 18 as headnodes #NodeName=ny5-dv-kttres-17 Sockets=1 CoresPerSocket=18 ThreadsPerCore=2 Feature=HyperThread RealMemory=102400 #NodeName=ny5-dv-kttres-18 Sockets=1 CoresPerSocket=14 ThreadsPerCore=2 Feature=HyperThread RealMemory=102400 NodeName=ny5-dv-kttres-19 Sockets=1 CoresPerSocket=12 ThreadsPerCore=2 Feature=HyperThread RealMemory=102400 NodeName=ny5-dv-kttres-[20-21] Sockets=1 CoresPerSocket=18 ThreadsPerCore=2 Feature=HyperThread RealMemory=102400 NodeName=ny5-dv-kttres-[01-16] Sockets=2 CoresPerSocket=16 ThreadsPerCore=2 Feature=HyperThread RealMemory=233472 NodeName=ny5-dv-kttres-[22-35] Sockets=2 CoresPerSocket=32 ThreadsPerCore=2 Feature=HyperThread RealMemory=346884 PartitionName=ktt_slurm_light_1 Nodes=ny5-dv-kttres-[19-21] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_medium_1 Nodes=ny5-dv-kttres-[01-08] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_medium_2 Nodes=ny5-dv-kttres-[09-16] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_medium_3 Nodes=ny5-dv-kttres-[22-28] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_medium_4 Nodes=ny5-dv-kttres-[29-35] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_large_1 Nodes=ny5-dv-kttres-[01-16] Default=YES MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 PartitionName=ktt_slurm_large_2 Nodes=ny5-dv-kttres-[22-35] Default=NO MaxTime=INFINITE State=UP OverSubscribe=FORCE:2 Slurmdbd.conf AuthType=auth/munge DbdAddr=10.202.233.72 DbdHost=ny5-pr-kttslurmdb-01 DebugLevel=debug5 LogFile=/var/log/slurm/slurmdbd.log PidFile=/tmp/slurmdbd.pid StorageType=accounting_storage/mysql StorageHost=localhost #StorageHost=10.234.132.57 StorageUser=slurm SlurmUser=slurm StoragePass=xxxxxxx #StorageUser=slurm #StorageLoc=slurm_acct_db Database tables MariaDB [slurm_acct_db]> show tables; +--------------------------------+ | Tables_in_slurm_acct_db | +--------------------------------+ | acct_coord_table | | acct_table | | clus_res_table | | cluster_table | | convert_version_table | | federation_table | | ny5ktt_assoc_table | | ny5ktt_assoc_usage_day_table | | ny5ktt_assoc_usage_hour_table | | ny5ktt_assoc_usage_month_table | | ny5ktt_event_table | | ny5ktt_job_table | | ny5ktt_last_ran_table | | ny5ktt_resv_table | | ny5ktt_step_table | | ny5ktt_suspend_table | | ny5ktt_usage_day_table | | ny5ktt_usage_hour_table | | ny5ktt_usage_month_table | | ny5ktt_wckey_table | | ny5ktt_wckey_usage_day_table | | ny5ktt_wckey_usage_hour_table | | ny5ktt_wckey_usage_month_table | | qos_table | | res_table | | table_defs_table | | tres_table | | txn_table | | user_table | +--------------------------------+ Many Thanks Adrian Disclaimer Schonfeld Strategic Advisors (UK) LLP (“SSA UK”) is authorised and regulated by The Financial Conduct Authority. SSA UK is a limited liability partnership in England and Wales (No: OC420598) and its registered office is at 54 Jermyn Street, London, SW1Y 6LX. The contents of this message, including any attachments, are meant solely for the intended recipient and may be confidential, privileged, or otherwise protected from disclosure. If you receive this message in error, immediately alert the sender by reply e-mail, delete it and any attachments or copies from your systems, and do not read, disclose, distribute, or otherwise use the information contained herein. We do not waive any confidentiality or privilege if this message was misdirected. This e-mail does not constitute an offer to sell or a solicitation to buy any securities or an offer of any investment advisory services. If you reply to this email please note that we invest in securities and do not want to receive material, non-public information and you are instructed not to communicate any such information to us. We do not agree to keep confidential any information you provide nor restrict our trading activity, except as agreed pursuant to a written confidentiality agreement duly executed by us. We reserve the right to monitor and review the content of all messages sent to or from this e-mail address.

1 0

Issue with interactive jobs
by Nerjes, Onno 17 Oct '24

17 Oct '24

Dear all, we've set up SLURM 24.05.3 on our cluster and are experiencing an issue with interactive jobs. Before, we used 21.08 and pretty much the same settings, but without these issues. We've started with a fresh DB etc. The behavior of interactive jobs is very erratic. Sometimes they start absolutely fine, at other times they die silently in the background, while the user has to wait indefinitely. We have been unable to isolate certain users or nodes affected by this. On a given node, one user might be able to start an interactive job, while another user at the same time isn't able to. The day after, the situation might be the other way around. The exception are jobs that use a reservation. These start fine every time as far as we can tell. At the same time, the number of idle nodes does not seem to influence the behavior I described above. Failed allocation on the front end: [user1@login1 ~]$ salloc salloc: Pending job allocation 5052052 salloc: job 5052052 queued and waiting for resources The same job on the backend: 2024-10-14 11:41:57.680 slurmctld: _job_complete: JobId=5052052 done 2024-10-14 11:41:57.678 slurmctld: _job_complete: JobId=5052052 WEXITSTATUS 1 2024-10-14 11:41:57.678 slurmctld: Killing interactive JobId=5052052: Communication connection failure 2024-10-14 11:41:46.666 slurmctld: sched/backfill: _start_job: Started JobId=5052052 in devel on m02n01 2024-10-14 11:41:30.096 slurmctld: sched: _slurm_rpc_allocate_resources JobId=5052052 NodeList=(null) usec=6258 Raising the debug level has not brought additional information. We were hoping, that one of you might be able to provide some insight into what the next steps in troubleshooting might be. Best regards, Onno

1 0

Dependency jobs
by adam＠bramblecfd.com 17 Oct '24

17 Oct '24

Hi Slurm Users, I am trying to figure out if there is a way you can check if a running job has any jobs queued up after it that depend on the current running job, I know you can show job info and find what dependency a job is waiting for, But more after checking if there are jobs waiting on the current job to complete using the job ID, Many Thanks, Adam

3 2

AllowAccounts partition setting
by Marko Markoc 17 Oct '24

17 Oct '24

Hi All, At one point, when we were running slurm 22, we set up a few new partitions with `AllowAccounts` setting enabled. We limit access to these partitions only to a few accounts. We manually create these accounts and users using the `sacctmgr` command. At that time, everything was working. Only users in these accounts were able to run jobs in that partition. Few months ago we upgraded slurm to 23.02.7 but just a couple of days ago we noticed that anyone could submit jobs to these partitions. In addition to that, you can provide any value to the `--account` directive and slurm will accept and record it in the job accounting database. In our initial testing, you could only provide `--account` value that has been previously created. I'm still looking into this but I wanted to check if there was any change in version 23 that could have impacted this? I don't remember seeing anything in release notes. Thanks, Marko

6 8

Problem with nodes with 1 gpu
by Jörg Striewski 16 Oct '24

16 Oct '24

i cannot send jobs to nodes with one gpu, i don't find the bug in my configuration. can someone help me ? in slurm.conf GresTypes=gpu is set this are some nodes in slurm.conf NodeName=gpu-[001-003] CPUs=8 SocketsPerBoard=1 CoresPerSocket=4 RealMemory=31000 Gres=gpu:1080:1 NodeName=gpu-[010-019] CPUs=16 SocketsPerBoard=1 CoresPerSocket=8 RealMemory=64000 Gres=gpu:1080:2 the partition for this gpu nodes is # General GPU partitions PartitionName=GPU Nodes=gpu-[001-003,010-019] AllowAccounts=staff PreemptMode=REQUEUE PriorityTier=0 DefMemPerGPU=32000 DefCpuPerGPU=8 CpuBind=none TRESBillingWeights="GRES/gpu=1000" GraceTime=300 this are the entries for some nodes in gres.conf NodeName=gpu-[001-003] Name=gpu Type=1080 File=/dev/nvidia0 NodeName=gpu-[010-019] Name=gpu Type=1080 File=/dev/nvidia[0-1] when i send a job with sbatch to gpu-001 #SBATCH --job-name=hello #SBATCH --ntasks-per-node=1 #SBATCH --output=hello_%A.out #SBATCH --time=00:10:00 #SBATCH --mail-type=ALL #SBATCH --mail-user=striewski(a)ismll.de #SBATCH --partition=GPU #SBATCH --nodelist=gpu-001 #SBATCH --gres=gpu:1 [...] i get the error sbatch: error: Batch job submission failed: Requested node configuration is not available when i send the job to a node with 2 gpu's it runs with no error, just setting --nodelist=gpu-12 has someone a hint what i made wrong ? Mit freundlichen Grüßen / kind regards -- Jörg Striewski Information Systems and Machine Learning Lab (ISMLL) Institute of Computer Science University of Hildesheim Germany post address: Universitätsplatz 1, D-31141Hildesheim, Germany visitor address: Samelsonplatz 1, D-31141 Hildesheim,Germany Tel.(+49) 05121 / 883-40392 http://www.ismll.uni-hildesheim.de

2 2

unsuscribe
by LEROY Christine 208562 15 Oct '24

15 Oct '24

unsuscribe

1 0

How does --nodes=min[-max] determine number of nodes to allocate?
by Declan Valters 08 Oct '24

08 Oct '24

Hi, I am trying to understand how Slurm determines the actual number of nodes to allocate to a job specified with -nodes=min[-max] I've been trying to follow the source code through on Github - could anyone point me in the right area(s)/source files/functions to look at to understand the program logic behind this. Many thanks in advance, Declan The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. Is e buidheann carthannais a th' ann an Oilthigh Dh?n ?ideann, cl?raichte an Alba, ?ireamh cl?raidh SC005336.

2 1

Jobs not getting scheduled, no priority calculation, but still in queue?
by Cutts, Tim 07 Oct '24

07 Oct '24

Something odd is going on on our cluster. User has a lot of pending jobs in a job array (a few thousand). squeue -u kmnx005 -r -t PD | head -5 JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 3045324_875 core run_scp_ kmnx005 PD 0:00 1 (JobArrayTaskLimit) 3045324_876 core run_scp_ kmnx005 PD 0:00 1 (JobArrayTaskLimit) 3045324_877 core run_scp_ kmnx005 PD 0:00 1 (JobArrayTaskLimit) 3045324_878 core run_scp_ kmnx005 PD 0:00 1 (JobArrayTaskLimit) None are getting scheduled. But when I ask SLURM what that job’s priority is, it produces no output: $ sprio -j 3045324 JOBID PARTITION PRIORITY SITE AGE FAIRSHARE JOBSIZE PARTITION QOS TRES Any clues what’s going on here? -- Tim Cutts Scientific Computing Platform Lead AstraZeneca Find out more about R&D IT Data, Analytics & AI and how we can support you by visiting our Service Catalogue<https://azcollaboration.sharepoint.com/sites/CMU993> | ________________________________ AstraZeneca UK Limited is a company incorporated in England and Wales with registered number:03674842 and its registered office at 1 Francis Crick Avenue, Cambridge Biomedical Campus, Cambridge, CB2 0AA. This e-mail and its attachments are intended for the above named recipient only and may contain confidential and privileged information. If they have come to you in error, you must not copy or show them to anyone; instead, please reply to this e-mail, highlighting the error to the sender and then immediately delete the message. For information about how AstraZeneca UK Limited and its affiliates may process information, personal data and monitor communications, please see our privacy notice at www.astrazeneca.com<https://www.astrazeneca.com>

2 3

SLURM GRES reservation not working properly on 24.05.1
by Minulakshmi S 07 Oct '24

07 Oct '24

Hello, *Issue 1:* I am using slurm version 24.05.1 , my slurmd has a single node where I connect multiple gres by enabling the overscribe feature. I am able to use the advance reservation of gres only using *gres** name* (tres=gres/gpu:*SYSTEM12*). i.e while in reservation period , if other users submits job with SYSTEM12 , then slurm places this job in queue *user1@host$ srun --gres=gpu:SYSTEM12:1 hostname* *srun: job 333 queued and waiting for resources * but when other users just submit a job without any system name , slurm jobs goes through on that gres immediately even though it is reserved. *user1@host$ srun --gres=gpu:1 hostname * *mylinux.wbi.com <http://mylinux.wbi.com/> * Also I can see GresUsed in busy mode using "*scontrol show node -d*" , this means the job is running on Gres/GPU and not on cpu etc. Same way , job submission based on Feature "rev1 in my case" is also going through even though it is reserved for other users in multiple partition slurm. *snippet of slurm.conf file* NodeName=cluster01 NodeAddr=cluster Port=6002CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=8 ThreadsPerCore=2 Feature="rev1" Gres=gpu:SYSTEM12:1 RealMemory=64171 State=IDLE *Issue 2:* while execution , Slurm o/p's some extra prints in the srun output user1@host$ srun --gres=gpu:1 hostname srun: error: extract_net_cred: net_cred not provided srun: error: Malformed RPC of type RESPONSE_NODE_ALIAS_ADDRS(3017) received srun: error: slurm_unpack_received_msg: [mylinux.wbi.com]:41242] Header lengths are longer than data received *mylinux.wbi.com <http://mylinux.wbi.com/>* Regards, MS

1 1

Slurmctld process error 'double free or corruption' on RHEL 9 (Rocky Linux)
by William VINCENT 07 Oct '24

07 Oct '24

Hello I am writing to report an issue with the Slurmctld process on our RHEL 9 (Rocky Linux) . Twice in the past 5 days, the Slurmctld process has encountered an error that resulted in the service stopping. The error message displayed was "double free or corruption (out)". This error has caused significant disruption to our jobs, and we are concerned about its recurrence. We have tried troubleshooting the issue, but we have not been able to identify the root cause of the problem. We would appreciate any assistance or guidance you can provide to help us resolve this issue. Please let us know if you need any additional information or if there are any specific steps we should take to diagnose the problem further. Thank you for your attention to this matter. Best regards, _________________________ Jul 09 22:12:01 admin slurmctld[711010]: double free or corruption (fasttop) Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Consumed 11min 26.451s CPU time. ..... Jul 14 10:15:01 admin slurmctld[1633720]: double free or corruption (out) Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Consumed 7min 27.596s CPU time. _________________________ slurmctld -V slurm 22.05.9 ________________________ cat /etc/slurm/slurm.conf |grep -v '#' ClusterName=xxx SlurmctldHost=admin SlurmctldParameters=enable_configless SlurmUser=slurm AuthType=auth/munge CryptoType=crypto/munge SlurmctldPort=6817 StateSaveLocation=/var/spool/slurmctld SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmctldDebug=verbose DebugFlags=NO_CONF_HASH SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmdLogFile=/var/log/slurm/slurmd.log SlurmdDebug=verbose SchedulerType=sched/backfill SelectType=select/cons_tres SelectTypeParameters=CR_Core,CR_LLN DefMemPerCPU=1024 MaxMemPerCPU=4096 GresTypes=gpu ProctrackType=proctrack/cgroup JobAcctGatherType=jobacct_gather/cgroup JobAcctGatherFrequency=15 JobCompType=jobcomp/none TaskPlugin=task/cgroup LaunchParameters=use_interactive_step AccountingStorageType=accounting_storage/slurmdbd AccountingStorageHost=admin AccountingStoragePort=6819 AccountingStorageEnforce=associations AccountingStorageTRES=gres/gpu MailProg=/usr/bin/mailx EnforcePartLimits=YES MaxArraySize=200000 MaxJobCount=500000 MpiDefault=none ReturnToService=2 SwitchType=switch/none TmpFS=/tmpslurm/ UsePAM=1 InactiveLimit=0 KillWait=30 MessageTimeout=30 MinJobAge=300 SlurmctldTimeout=120 SlurmdTimeout=300 Waittime=0 PriorityType=priority/multifactor PriorityFlags=FAIR_TREE,MAX_TRES PriorityDecayHalfLife=1-0 PriorityWeightFairshare=10000 NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=2 Sockets=2 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=r9nc-24-[1-12] NodeHostname=r9nc-24-[1-12] Sockets=2 CoresPerSocket=12 ThreadsPerCore=1 CPUs=24 RealMemory=180000 State=UNKNOWN NodeName=r9nc-48-[1-4] NodeHostname=r9nc-48-[1-4] Sockets=2 CoresPerSocket=24 ThreadsPerCore=1 CPUs=48 RealMemory=480000 State=UNKNOWN NodeName=r9ng-1080-[1-7] NodeHostname=r9ng-1080-[1-7] Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=180000 State=UNKNOWN Gres=gpu:1080ti:4 NodeName=r9ng-1080-8 NodeHostname=r9ng-1080-8 Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=176687 State=UNKNOWN Gres=gpu:1080ti:1 PartitionName=24CPUNodes Nodes=r9nc-24-[1-12] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=7500 DefMemPerCPU=7500 TRESBillingWeights="CPU=1.0,Mem=0.125G" Default=YES PartitionName=48CPUNodes Nodes=r9nc-48-[1-4] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=10000 DefMemPerCPU=8000 TRESBillingWeights="CPU=1.0,Mem=0.125G" PartitionName=GPUNodes Nodes=r9ng-1080-[1-7] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 PartitionName=GPUNodes1080-dev Nodes=r9ng-1080-8 State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 Hidden=Yes _________________________ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST 24CPUNodes* up infinite 12 idle r9nc-24-[1-12] 48CPUNodes up infinite 2 idle r9nc-48-[1-2] GPUNodes up infinite 4 idle r9ng-1080-[4-7] GPUNodes1080-dev up infinite 1 idle r9ng-1080-8 -- William VINCENT Administrateur systèmes et réseaux

4 15

license server redundancy
by Yves Kondoszek 03 Oct '24

03 Oct '24

Hello. I'm configuring a cluster that will run jobs that use FlexLM licenses. We have what I believe is a quite standard configuration of license servers - though I haven't found anything in the documentation or in the mailing list archives - that often provide the same features across several servers; for example, the license token "simulation" will be available at let's say 1717@server1, 1717@server2 and 4000@server3 . FlexLM clients support those through a path-style environment variable, typically LM_LICENSE_FILE=1717@server1:1717@server2:4000@server3 . Now, I have set up Slurm for remote dynamic licenses and update them live through "LastConsumed" from lmstat requests, so that Slurm is aware of some users checking them out externally (out of Slurm control). But my problem is that the documentation clearly states that: "When submitting jobs to remote licenses, the name and server must be used." So I have to specifically choose a server: $ sbatch -L simulation@server2 script.sh instead of telling Slurm to just use whatever license is available on any of the servers. Does any of you have any experience with redundant FlexLM licenses through several servers? Is there a way Slurm could support this?

1 0

GPU Accounting
by Emyr James 03 Oct '24

03 Oct '24

We have a node with 8 H100 GPUs that are split into MIG instances. We are using cgroups. This seems to work fine. Users can do something like sbatch --gres="gpu:1g.10gb:1"... and the job starts on the node with the gpus and cuda visible devices and the pytorch debug shows that the cgroup only gives them the gpu they asked for. In the accounting database, jobs in the job table always have the "gres_used" column be empty. I'd expect to see "gpu:1g.10gb:1" appearing for the job above. I have this set in slurm.conf AccountingStorageTRES=gres/gpu How can I see what gres was requested with the job ? At the moment I only see something like this in AllocTres billing=1,cpu=1,gres/gpu=1,mem=8G,node=1 and can't see any way to see what the specific MIG gpu asked for was. This is related to the email from Richard Lefebvre dated 7th June 2023 entitled "Billing/accounting for MIGs is not working". As far as I can see this got no replies. We are running slurm version 23.11.6. Regards, Emyr James Head of Scientific IT CRG - Centre for Genomic Regulation

2 1

SLUG Presentations Now Online!
by Victoria Hobson 01 Oct '24

01 Oct '24

Available presentations from this year's SLUG event are now online. They can be found at https://www.schedmd.com/publications/ We thank all those who presented and attended for a great event! -- Victoria Hobson SchedMD LLC Vice President of Marketing

1 0

Job Step State
by Emyr James 01 Oct '24

01 Oct '24

Dear all, I am working on a script to take completed job accounting data from the slurm accounting database and insert the equivalent data into a clickhouse table for fast reporting I can see that all the information is included in the cluster_job_table and cluster_job_step_table which seem to be joined on job_db_inx To get the cpu usage and peak memory usage etc. I can see that I need to parse the tres columns in the job steps. I couldn't find any column called MaxRSS in the database even though the sacct command prints this. I then found some data in tres_table and assume that sacct is using this. Please correct me if I'm wrong and if sacct is getting information from somwhere other than the accounting database? for the state column I get this... select state, count(*) as num from crg_step_table group by state order by num desc limit 10; +-------+--------+ | state | num | +-------+--------+ | 3 | 590635 | | 5 | 28345 | | 4 | 4401 | | 11 | 962 | | 1 | 8 | +-------+--------+ When I use sacct I see statuses seach as COMPLETED, OUT_OF_MEMORY etc. so there must be a mapping somewhere between these state ids and that text. Can someone prvide that mapping or point me to where it's defined in the database or in the code ? Many thanks, Emyr James Head of Scientific IT CRG - Centre for Genomic Regulation

2 2

Hardcoded CGroups v2 Slice
by Khalid Al-Hawaj 01 Oct '24

01 Oct '24

Hello, I am in the process of setting up SLURM to be used in a profiling cluster. The purpose of SLURM is to allow users to submit jobs to be profiled. The latency is a very important aspect of profiling the applications correctly. I was able to leverage cgroupsv2.0 to isolate user.slice from the cores that would be used by SLURM jobs. The issue is that slurmstepd shares the resources with system.slice; I was digging through the code, and I saw that the creation of the scope is here: https://github.com/SchedMD/slurm/blob/master/src/plugins/cgroup/v2/cgroup_v… And I noticed that the slice is hardcoded in the following line: https://github.com/SchedMD/slurm/blob/master/src/plugins/cgroup/v2/cgroup_v… So, my question, now, is about why is the slice hardcoded? What was the reason behind such a decision? I would have thought that the slice chosen would be set through cgroups.conf, instead. I would like to switch the slice for slurmstepd to a slice other than system.slice; by doing so, I would be able to isolate cores better by making sure that services' processes are isolated from the cores used for SLURM jobs. I can definitely change the defined value in the code and recompile. Are there anything to consider before doing so? Thanks, Khalid

1 0

Updated one compute node to Ubuntu 24.04 LTS, now it does not receive jobs
by Cristóbal Navarro 29 Sep '24

29 Sep '24

Dear community, I am having a strange issue I have been unable to find the cause. Last week I did a full update on the cluster, which is composed of the master node, and two compute nodes (nodeGPU01 -> DGXA100 and nodeGPU02 -> custom GPU server). After the update, I got - master node ended up with Ubuntu 24.04, - nodeGPU01 with latest DGX OS (still Ubuntu 22.04) - nodeGPU02 with Ubuntu 24.04 LTS. - Launching jobs from master choosing the partitions of nodeGPU01 works perfectly. - Launching jobs from master choosing the partition of nodeGPU02 stopped working (hangs). The nodeGPU02 (Ubuntu 24) is no longer processing jobs successfully, while the other nodeGPU01 works perfectly even when the master has Ubuntu 24. Any help is welcome, I have tried many things and had no success in finding the cause of this. Please let me know if you need more information. Many thanks in advance. This is the initial `slurmd` log of the problematic node (nodeGPU02), notice the messages in yellow ➜ ~ sudo systemctl status slurmd.service ● slurmd.service - Slurm node daemon Loaded: loaded (/etc/systemd/system/slurmd.service; enabled; preset: enabled) Active: active (running) since Sat 2024-09-28 14:00:22 -03; 4s ago Main PID: 4821 (slurmd) Tasks: 1 Memory: 17.0M (peak: 29.7M) CPU: 174ms CGroup: /system.slice/slurmd.service └─4821 /usr/sbin/slurmd -D -s Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: MPI: Loading all types Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: mpi/pmix_v5: init: PMIx plugin loaded Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: mpi/pmix_v5: init: PMIx plugin loaded Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug2: No mpi.conf file (/etc/slurm/mpi.conf) Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: slurmd started on Sat, 28 Sep 2024 14:00:25 -0300 Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: _step_connect: connect() failed for /var/spool/slurmd/slurmd/nodeGPU02_57436.0: Connection refused Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug2: health_check success rc:0 output: Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: CPUs=128 Boards=1 Sockets=2 Cores=64 Threads=1 Memory=773744 TmpDisk=899181 Uptime=2829 CPUSpecList=(null) FeaturesAvail=(nu> Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: _step_connect: connect() failed for /var/spool/slurmd/slurmd/nodeGPU02_57436.0: Connection refused Sep 28 14:00:25 nodeGPU02 slurmd[4821]: slurmd: debug: _handle_node_reg_resp: slurmctld sent back 11 TRES This is the verbose output of the srun command (notice yellow messages). ➜ ~ srun -vvvp rtx hostname srun: defined options srun: -------------------- -------------------- srun: partition : rtx srun: verbose : 3 srun: -------------------- -------------------- srun: end of defined options srun: debug: propagating RLIMIT_CPU=18446744073709551615 srun: debug: propagating RLIMIT_FSIZE=18446744073709551615 srun: debug: propagating RLIMIT_DATA=18446744073709551615 srun: debug: propagating RLIMIT_STACK=8388608 srun: debug: propagating RLIMIT_CORE=0 srun: debug: propagating RLIMIT_RSS=18446744073709551615 srun: debug: propagating RLIMIT_NPROC=3090276 srun: debug: propagating RLIMIT_NOFILE=1024 srun: debug: propagating RLIMIT_MEMLOCK=18446744073709551615 srun: debug: propagating RLIMIT_AS=18446744073709551615 srun: debug: propagating SLURM_PRIO_PROCESS=0 srun: debug: propagating UMASK=0002 srun: debug: Entering slurm_allocation_msg_thr_create() srun: debug: port from net_stream_listen is 34081 srun: debug: Entering _msg_thr_internal srun: Waiting for resource configuration srun: Nodes nodeGPU02 are ready for job srun: jobid 57463: nodes(1):`nodeGPU02', cpu counts: 1(x1) srun: debug2: creating job with 1 tasks srun: debug2: cpu:1 is not a gres: srun: debug: requesting job 57463, user 99, nodes 1 including ((null)) srun: debug: cpus 1, tasks 1, name hostname, relative 65534 srun: CpuBindType=(null type) srun: debug: Entering slurm_step_launch srun: debug: mpi/pmix_v4: pmixp_abort_agent_start: (null) [0]: pmixp_agent.c:382: Abort agent port: 41393 srun: debug: mpi/pmix_v4: mpi_p_client_prelaunch: (null) [0]: mpi_pmix.c:285: setup process mapping in srun srun: debug: Entering _msg_thr_create() srun: debug: mpi/pmix_v4: _pmix_abort_thread: (null) [0]: pmixp_agent.c:353: Start abort thread srun: debug: initialized stdio listening socket, port 33223 srun: debug: Started IO server thread (140079189182144) srun: debug: Entering _launch_tasks srun: launching StepId=57463.0 on host nodeGPU02, 1 tasks: 0 srun: debug2: Called _file_readable srun: debug2: Called _file_writable srun: route/default: init: route default plugin loaded srun: debug2: Called _file_writable srun: topology/none: init: topology NONE plugin loaded srun: debug2: Tree head got back 0 looking for 1 srun: debug: slurm_recv_timeout at 0 of 4, timeout srun: error: slurm_receive_msgs: [[nodeGPU02]:6818] failed: Socket timed out on send/recv operation srun: debug2: Tree head got back 1 srun: debug: launch returned msg_rc=1001 err=5004 type=9001 srun: debug2: marking task 0 done on failed node 0 srun: error: Task launch for StepId=57463.0 failed on node nodeGPU02: Socket timed out on send/recv operation srun: error: Application launch failed: Socket timed out on send/recv operation srun: Job step aborted srun: debug2: false, shutdown srun: debug2: false, shutdown srun: debug2: Called _file_readable srun: debug2: Called _file_writable srun: debug2: Called _file_writable srun: debug2: false, shutdown srun: debug: IO thread exiting srun: debug: mpi/pmix_v4: _conn_readable: (null) [0]: pmixp_agent.c:105: false, shutdown srun: debug: mpi/pmix_v4: _pmix_abort_thread: (null) [0]: pmixp_agent.c:355: Abort thread exit srun: debug2: slurm_allocation_msg_thr_destroy: clearing up message thread srun: debug2: false, shutdown srun: debug: Leaving _msg_thr_internal srun: debug2: spank: spank_pyxis.so: exit = 0 This is the `tail -f` log of slurmctld when launching a simple `srun hostname` [2024-09-28T14:08:10.264] ==================== [2024-09-28T14:08:10.264] JobId=57463 nhosts:1 ncpus:1 node_req:1 nodes=nodeGPU02 [2024-09-28T14:08:10.264] Node[0]: [2024-09-28T14:08:10.264] Mem(MB):65536:0 Sockets:2 Cores:64 CPUs:1:0 [2024-09-28T14:08:10.264] Socket[0] Core[0] is allocated [2024-09-28T14:08:10.264] -------------------- [2024-09-28T14:08:10.264] cpu_array_value[0]:1 reps:1 [2024-09-28T14:08:10.264] ==================== [2024-09-28T14:08:10.264] gres/gpu: state for nodeGPU02 [2024-09-28T14:08:10.264] gres_cnt found:3 configured:3 avail:3 alloc:0 [2024-09-28T14:08:10.264] gres_bit_alloc: of 3 [2024-09-28T14:08:10.264] gres_used:(null) [2024-09-28T14:08:10.264] topo[0]:(null)(0) [2024-09-28T14:08:10.264] topo_core_bitmap[0]:0-63 of 128 [2024-09-28T14:08:10.264] topo_gres_bitmap[0]:0 of 3 [2024-09-28T14:08:10.264] topo_gres_cnt_alloc[0]:0 [2024-09-28T14:08:10.264] topo_gres_cnt_avail[0]:1 [2024-09-28T14:08:10.264] topo[1]:(null)(0) [2024-09-28T14:08:10.264] topo_core_bitmap[1]:0-63 of 128 [2024-09-28T14:08:10.264] topo_gres_bitmap[1]:1 of 3 [2024-09-28T14:08:10.264] topo_gres_cnt_alloc[1]:0 [2024-09-28T14:08:10.264] topo_gres_cnt_avail[1]:1 [2024-09-28T14:08:10.264] topo[2]:(null)(0) [2024-09-28T14:08:10.264] topo_core_bitmap[2]:0-63 of 128 [2024-09-28T14:08:10.264] topo_gres_bitmap[2]:2 of 3 [2024-09-28T14:08:10.264] topo_gres_cnt_alloc[2]:0 [2024-09-28T14:08:10.264] topo_gres_cnt_avail[2]:1 [2024-09-28T14:08:10.265] sched: _slurm_rpc_allocate_resources JobId=57463 NodeList=nodeGPU02 usec=1339 [2024-09-28T14:08:10.368] ==================== [2024-09-28T14:08:10.368] JobId=57463 StepId=0 [2024-09-28T14:08:10.368] JobNode[0] Socket[0] Core[0] is allocated [2024-09-28T14:08:10.368] ==================== [2024-09-28T14:08:30.409] _job_complete: JobId=57463 WTERMSIG 12 [2024-09-28T14:08:30.410] gres/gpu: state for nodeGPU02 [2024-09-28T14:08:30.410] gres_cnt found:3 configured:3 avail:3 alloc:0 [2024-09-28T14:08:30.410] gres_bit_alloc: of 3 [2024-09-28T14:08:30.410] gres_used:(null) [2024-09-28T14:08:30.410] topo[0]:(null)(0) [2024-09-28T14:08:30.410] topo_core_bitmap[0]:0-63 of 128 [2024-09-28T14:08:30.410] topo_gres_bitmap[0]:0 of 3 [2024-09-28T14:08:30.410] topo_gres_cnt_alloc[0]:0 [2024-09-28T14:08:30.410] topo_gres_cnt_avail[0]:1 [2024-09-28T14:08:30.410] topo[1]:(null)(0) [2024-09-28T14:08:30.410] topo_core_bitmap[1]:0-63 of 128 [2024-09-28T14:08:30.410] topo_gres_bitmap[1]:1 of 3 [2024-09-28T14:08:30.410] topo_gres_cnt_alloc[1]:0 [2024-09-28T14:08:30.410] topo_gres_cnt_avail[1]:1 [2024-09-28T14:08:30.410] topo[2]:(null)(0) [2024-09-28T14:08:30.410] topo_core_bitmap[2]:0-63 of 128 [2024-09-28T14:08:30.410] topo_gres_bitmap[2]:2 of 3 [2024-09-28T14:08:30.410] topo_gres_cnt_alloc[2]:0 [2024-09-28T14:08:30.410] topo_gres_cnt_avail[2]:1 [2024-09-28T14:08:30.410] _job_complete: JobId=57463 done [2024-09-28T14:08:58.687] gres/gpu: state for nodeGPU01 [2024-09-28T14:08:58.687] gres_cnt found:8 configured:8 avail:8 alloc:0 [2024-09-28T14:08:58.687] gres_bit_alloc: of 8 [2024-09-28T14:08:58.687] gres_used:(null) [2024-09-28T14:08:58.687] topo[0]:A100(808464705) [2024-09-28T14:08:58.687] topo_core_bitmap[0]:48-63 of 128 [2024-09-28T14:08:58.687] topo_gres_bitmap[0]:0 of 8 [2024-09-28T14:08:58.687] topo_gres_cnt_alloc[0]:0 [2024-09-28T14:08:58.687] topo_gres_cnt_avail[0]:1 [2024-09-28T14:08:58.687] topo[1]:A100(808464705) [2024-09-28T14:08:58.687] topo_core_bitmap[1]:48-63 of 128 [2024-09-28T14:08:58.687] topo_gres_bitmap[1]:1 of 8 [2024-09-28T14:08:58.687] topo_gres_cnt_alloc[1]:0 [2024-09-28T14:08:58.687] topo_gres_cnt_avail[1]:1 [2024-09-28T14:08:58.687] topo[2]:A100(808464705) [2024-09-28T14:08:58.687] topo_core_bitmap[2]:16-31 of 128 [2024-09-28T14:08:58.687] topo_gres_bitmap[2]:2 of 8 [2024-09-28T14:08:58.687] topo_gres_cnt_alloc[2]:0 [2024-09-28T14:08:58.687] topo_gres_cnt_avail[2]:1 [2024-09-28T14:08:58.687] topo[3]:A100(808464705) [2024-09-28T14:08:58.687] topo_core_bitmap[3]:16-31 of 128 [2024-09-28T14:08:58.688] topo_gres_bitmap[3]:3 of 8 [2024-09-28T14:08:58.688] topo_gres_cnt_alloc[3]:0 [2024-09-28T14:08:58.688] topo_gres_cnt_avail[3]:1 [2024-09-28T14:08:58.688] topo[4]:A100(808464705) [2024-09-28T14:08:58.688] topo_core_bitmap[4]:112-127 of 128 [2024-09-28T14:08:58.688] topo_gres_bitmap[4]:4 of 8 [2024-09-28T14:08:58.688] topo_gres_cnt_alloc[4]:0 [2024-09-28T14:08:58.688] topo_gres_cnt_avail[4]:1 [2024-09-28T14:08:58.688] topo[5]:A100(808464705) [2024-09-28T14:08:58.688] topo_core_bitmap[5]:112-127 of 128 [2024-09-28T14:08:58.688] topo_gres_bitmap[5]:5 of 8 [2024-09-28T14:08:58.688] topo_gres_cnt_alloc[5]:0 [2024-09-28T14:08:58.688] topo_gres_cnt_avail[5]:1 [2024-09-28T14:08:58.688] topo[6]:A100(808464705) [2024-09-28T14:08:58.688] topo_core_bitmap[6]:80-95 of 128 [2024-09-28T14:08:58.688] topo_gres_bitmap[6]:6 of 8 [2024-09-28T14:08:58.688] topo_gres_cnt_alloc[6]:0 [2024-09-28T14:08:58.688] topo_gres_cnt_avail[6]:1 [2024-09-28T14:08:58.688] topo[7]:A100(808464705) [2024-09-28T14:08:58.688] topo_core_bitmap[7]:80-95 of 128 [2024-09-28T14:08:58.688] topo_gres_bitmap[7]:7 of 8 [2024-09-28T14:08:58.688] topo_gres_cnt_alloc[7]:0 [2024-09-28T14:08:58.688] topo_gres_cnt_avail[7]:1 [2024-09-28T14:08:58.688] type[0]:A100(808464705) [2024-09-28T14:08:58.688] type_cnt_alloc[0]:0 [2024-09-28T14:08:58.688] type_cnt_avail[0]:8 [2024-09-28T14:08:58.690] gres/gpu: state for nodeGPU02 [2024-09-28T14:08:58.690] gres_cnt found:3 configured:3 avail:3 alloc:0 [2024-09-28T14:08:58.690] gres_bit_alloc: of 3 [2024-09-28T14:08:58.690] gres_used:(null) [2024-09-28T14:08:58.690] topo[0]:(null)(0) [2024-09-28T14:08:58.690] topo_core_bitmap[0]:0-63 of 128 [2024-09-28T14:08:58.690] topo_gres_bitmap[0]:0 of 3 [2024-09-28T14:08:58.690] topo_gres_cnt_alloc[0]:0 [2024-09-28T14:08:58.690] topo_gres_cnt_avail[0]:1 [2024-09-28T14:08:58.690] topo[1]:(null)(0) [2024-09-28T14:08:58.690] topo_core_bitmap[1]:0-63 of 128 [2024-09-28T14:08:58.690] topo_gres_bitmap[1]:1 of 3 [2024-09-28T14:08:58.690] topo_gres_cnt_alloc[1]:0 [2024-09-28T14:08:58.690] topo_gres_cnt_avail[1]:1 [2024-09-28T14:08:58.690] topo[2]:(null)(0) [2024-09-28T14:08:58.690] topo_core_bitmap[2]:0-63 of 128 [2024-09-28T14:08:58.690] topo_gres_bitmap[2]:2 of 3 [2024-09-28T14:08:58.690] topo_gres_cnt_alloc[2]:0 [2024-09-28T14:08:58.690] topo_gres_cnt_avail[2]:1 [2024-09-28T14:09:49.763] Resending TERMINATE_JOB request JobId=57463 Nodelist=nodeGPU02 This is the `tail -f` log of slurmd when launching the job from master, notice the messages in yellow [2024-09-28T14:08:10.270] debug2: Processing RPC: REQUEST_LAUNCH_PROLOG [2024-09-28T14:08:10.321] debug2: prep/script: _run_subpath_command: prolog success rc:0 output: [2024-09-28T14:08:10.323] debug2: Finish processing RPC: REQUEST_LAUNCH_PROLOG [2024-09-28T14:08:10.377] debug: Checking credential with 720 bytes of sig data [2024-09-28T14:08:10.377] debug2: Start processing RPC: REQUEST_LAUNCH_TASKS [2024-09-28T14:08:10.377] debug2: Processing RPC: REQUEST_LAUNCH_TASKS [2024-09-28T14:08:10.377] launch task StepId=57463.0 request from UID:10082 GID:10088 HOST:10.10.0.1 PORT:36478 [2024-09-28T14:08:10.377] CPU_BIND: JobNode[0] CPU[0] Step alloc [2024-09-28T14:08:10.377] CPU_BIND: ==================== [2024-09-28T14:08:10.377] CPU_BIND: Memory extracted from credential for StepId=57463.0 job_mem_limit=65536 step_mem_limit=65536 [2024-09-28T14:08:10.377] debug: Waiting for job 57463's prolog to complete [2024-09-28T14:08:10.377] debug: Finished wait for job 57463's prolog to complete [2024-09-28T14:08:10.378] error: _send_slurmstepd_init failed [2024-09-28T14:08:10.384] debug2: debug level read from slurmd is 'debug2'. [2024-09-28T14:08:10.385] debug2: _read_slurmd_conf_lite: slurmd sent 11 TRES. [2024-09-28T14:08:10.385] debug2: Received CPU frequency information for 128 CPUs [2024-09-28T14:08:10.385] select/cons_tres: common_init: select/cons_tres loaded [2024-09-28T14:08:10.385] debug: switch/none: init: switch NONE plugin loaded [2024-09-28T14:08:10.385] [57463.0] debug: auth/munge: init: loaded [2024-09-28T14:08:10.385] [57463.0] debug: Reading cgroup.conf file /etc/slurm/cgroup.conf [2024-09-28T14:08:10.395] [57463.0] debug: cgroup/v2: init: Cgroup v2 plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug: hash/k12: init: init: KangarooTwelve hash plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug: acct_gather_energy/none: init: AcctGatherEnergy NONE plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug: acct_gather_profile/none: init: AcctGatherProfile NONE plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug: acct_gather_interconnect/none: init: AcctGatherInterconnect NONE plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug: acct_gather_filesystem/none: init: AcctGatherFilesystem NONE plugin loaded [2024-09-28T14:08:10.396] [57463.0] debug2: Reading acct_gather.conf file /etc/slurm/acct_gather.conf [2024-09-28T14:08:10.396] [57463.0] debug2: hwloc_topology_init [2024-09-28T14:08:10.399] [57463.0] debug2: xcpuinfo_hwloc_topo_load: xml file (/var/spool/slurmd/slurmd/hwloc_topo_whole.xml) found [2024-09-28T14:08:10.400] [57463.0] debug: CPUs:128 Boards:1 Sockets:2 CoresPerSocket:64 ThreadsPerCore:1 [2024-09-28T14:08:10.401] [57463.0] debug: task/cgroup: init: core enforcement enabled [2024-09-28T14:08:10.401] [57463.0] debug: task/cgroup: task_cgroup_memory_init: task/cgroup/memory: TotCfgRealMem:773744M allowed:100%(enforced), swap:0%(enforced), max:100%(773744M) max+swap:0%(773744M) min:30M kmem:100%(773744M permissive) min:30M [2024-09-28T14:08:10.401] [57463.0] debug: task/cgroup: init: memory enforcement enabled [2024-09-28T14:08:10.401] [57463.0] debug: task/cgroup: init: device enforcement enabled [2024-09-28T14:08:10.401] [57463.0] debug: task/cgroup: init: Tasks containment cgroup plugin loaded [2024-09-28T14:08:10.401] [57463.0] debug: jobacct_gather/linux: init: Job accounting gather LINUX plugin loaded [2024-09-28T14:08:10.401] [57463.0] cred/munge: init: Munge credential signature plugin loaded [2024-09-28T14:08:10.401] [57463.0] debug: job_container/none: init: job_container none plugin loaded [2024-09-28T14:08:10.401] [57463.0] debug: gres/gpu: init: loaded [2024-09-28T14:08:10.401] [57463.0] debug: gpu/generic: init: init: GPU Generic plugin loaded [2024-09-28T14:08:30.415] debug2: Start processing RPC: REQUEST_TERMINATE_JOB [2024-09-28T14:08:30.415] debug2: Processing RPC: REQUEST_TERMINATE_JOB [2024-09-28T14:08:30.415] debug: _rpc_terminate_job: uid = 777 JobId=57463 [2024-09-28T14:08:30.415] debug: credential for job 57463 revoked [2024-09-28T14:08:30.415] debug: sent SUCCESS, waiting for step to start [2024-09-28T14:08:30.415] debug: Blocked waiting for JobId=57463, all steps [2024-09-28T14:08:58.688] debug2: Start processing RPC: REQUEST_NODE_REGISTRATION_STATUS [2024-09-28T14:08:58.689] debug2: Processing RPC: REQUEST_NODE_REGISTRATION_STATUS [2024-09-28T14:08:58.689] debug: _step_connect: connect() failed for /var/spool/slurmd/slurmd/nodeGPU02_57436.0: Connection refused [2024-09-28T14:08:58.692] debug: _handle_node_reg_resp: slurmctld sent back 11 TRES. [2024-09-28T14:08:58.692] debug2: Finish processing RPC: REQUEST_NODE_REGISTRATION_STATUS -- Cristóbal A. Navarro

1 1

errors compiling Slurm 18 on RHEL 9: [Makefile:577: scancel] Error 1 & It's not recommended to have unversioned Obsoletes
by Robert Kudyba 27 Sep '24

27 Sep '24

We're in the process of upgrading but first we're moving to RHEL 9. My attempt to compile using rpmbuild -v -ta --define "_lto_cflags %{nil}" slurm-18.08.9.tar.bz2 (H/T to Brian for this flag <https://groups.google.com/g/slurm-users/c/W8YfGIn1rDI/m/4bsSAoqZAAAJ>). I've stumped Google and the Slurm mailing list with the scancel error so hoping someone here knows of a work around. /bin/ld: opt.o:/root/rpmbuild/BUILD/slurm-18.08.9/src/scancel/../../src/scancel/scancel.h:78: multiple definition of `opt'; scancel.o:/root/rpmbuild/BUILD/slurm-18.08.9/src/scancel/../../src/scancel/scancel.h:78: first defined here collect2: error: ld returned 1 exit status make[3]: *** [Makefile:577: scancel] Error 1 make[3]: Leaving directory '/root/rpmbuild/BUILD/slurm-18.08.9/src/scancel' make[2]: *** [Makefile:563: all-recursive] Error 1 make[2]: Leaving directory '/root/rpmbuild/BUILD/slurm-18.08.9/src' make[1]: *** [Makefile:690: all-recursive] Error 1 make[1]: Leaving directory '/root/rpmbuild/BUILD/slurm-18.08.9' make: *** [Makefile:589: all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.jhiGyR (%build) RPM build errors: Macro expanded in comment on line 22: %_prefix path install path for commands, libraries, etc. line 70: It's not recommended to have unversioned Obsoletes: Obsoletes: slurm-lua slurm-munge slurm-plugins Macro expanded in comment on line 158: %define _unpackaged_files_terminate_build 0 line 224: It's not recommended to have unversioned Obsoletes: Obsoletes: slurm-sql line 256: It's not recommended to have unversioned Obsoletes: Obsoletes: slurm-sjobexit slurm-sjstat slurm-seff line 275: It's not recommended to have unversioned Obsoletes: Obsoletes: pam_slurm Bad exit status from /var/tmp/rpm-tmp.jhiGyR (%build) #!/bin/sh RPM_SOURCE_DIR="/root" RPM_BUILD_DIR="/root/rpmbuild/BUILD" RPM_OPT_FLAGS="-O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection" RPM_LD_FLAGS="-Wl,-z,relro -Wl,--as-needed "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 " RPM_ARCH="x86_64" RPM_OS="linux" RPM_BUILD_NCPUS="48" export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_LD_FLAGS RPM_ARCH RPM_OS RPM_BUILD_NCPUS RPM_LD_FLAGS RPM_DOC_DIR="/usr/share/doc" export RPM_DOC_DIR RPM_PACKAGE_NAME="slurm" RPM_PACKAGE_VERSION="18.08.9" RPM_PACKAGE_RELEASE="1.el9" export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE LANG=C export LANG unset CDPATH DISPLAY ||: RPM_BUILD_ROOT="/root/rpmbuild/BUILDROOT/slurm-18.08.9-1.el9.x86_64" export RPM_BUILD_ROOT PKG_CONFIG_PATH="${PKG_CONFIG_PATH}:/usr/lib64/pkgconfig:/usr/share/pkgconfig" export PKG_CONFIG_PATH CONFIG_SITE=${CONFIG_SITE:-NONE} export CONFIG_SITE set -x umask 022 cd "/root/rpmbuild/BUILD" cd 'slurm-18.08.9' CFLAGS="${CFLAGS:--O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CFLAGS ; CXXFLAGS="${CXXFLAGS:--O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CXXFLAGS ; FFLAGS="${FFLAGS:--O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; FCFLAGS="${FCFLAGS:--O2 -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; LDFLAGS="${LDFLAGS:--Wl,-z,relro -Wl,--as-needed "-Wl,-z,lazy" -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 }" ; export LDFLAGS ; LT_SYS_LIBRARY_PATH="${LT_SYS_LIBRARY_PATH:-/usr/lib64:}" ; export LT_SYS_LIBRARY_PATH ; CC="${CC:-gcc}" ; export CC ; CXX="${CXX:-g++}" ; export CXX; [ ""x != x ] && for file in $(find . -type f -name configure -print); do /usr/bin/sed -r --in-place=.backup 's/^char $\*f$  = /__attribute__ ((used)) char (*f) () = /g' $file; diff -u $file.backup $file && mv $file.backup $file /usr/bin/sed -r --in-place=.backup 's/^char $\*f$ ;/__attribute__ ((used)) char (*f) ();/g' $file; diff -u $file.backup $file && mv $file.backup $file /usr/bin/sed -r --in-place=.backup 's/^char \$2 ;/__attribute__ ((used)) char \$2 ();/g' $file; diff -u $file.backup $file && mv $file.backup $file /usr/bin/sed --in-place=.backup '1{$!N;$!N};$!N;s/int x = 1;\nint y = 0;\nint z;\nint nan;/volatile int x = 1; volatile int y = 0; volatile int z, nan;/;P;D' $file; diff -u $file.backup $file && mv $file.backup $file /usr/bin/sed --in-place=.backup 's#^lt_cv_sys_global_symbol_to_cdecl=.*#lt_cv_sys_global_symbol_to_cdecl="sed -n -e '"'"'s/^T .* \$.*\$$/extern int \\1();/p'"'"' -e '"'"'s/^$symcode* .* \$.*\$$/extern char \\1;/p'"'"'"#' $file; diff -u $file.backup $file && mv $file.backup $file done; [ "1" = 1 ] && for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ; do [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /usr/bin/rm -f $i && /usr/bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; done ; [ "1" = 1 ] && [ x != "x"-Wl,-z,lazy"" ] && for i in $(find . -name ltmain.sh) ; do /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags=""-Wl,-z,lazy""~' $i done ; ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \ --program-prefix= \ --disable-dependency-tracking \ \ --prefix=/usr \ --exec-prefix=/usr \ --bindir=/usr/bin \ --sbindir=/usr/sbin \ --sysconfdir=/etc/slurm \ --datadir=/usr/share \ --includedir=/usr/include \ --libdir=/usr/lib64 \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/var/lib \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ \ make -j48 RPM_EC=$? for pid in $(jobs -p); do kill -9 ${pid} || continue; done exit ${RPM_EC}

2 2

Re: SLUG'24 presentation slides?
by Kilian Cavalotti 27 Sep '24

27 Sep '24

Awesome, thanks Victoria! Cheers, -- Kilian On Thu, Sep 26, 2024 at 11:17 AM Victoria Hobson <victoria(a)schedmd.com> wrote: > Hi Kilian, > > We're getting these posted now and an email will go out when they are > available! > > Thanks, > > > Victoria Hobson > > *Vice President of Marketing * > > 909.609.8889 > > www.schedmd.com > > > On Mon, Sep 23, 2024 at 10:49 AM Kilian Cavalotti via slurm-users < > slurm-users(a)lists.schedmd.com> wrote: > >> Hi SchedMD, >> >> I'm sure they will eventually, but do you know when the slides of the >> SLUG'24 presentation will be available online at >> https://slurm.schedmd.com/publications.html, like previous editions'? >> >> Thanks! >> -- >> Kilian >> >> -- >> slurm-users mailing list -- slurm-users(a)lists.schedmd.com >> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com >> > -- Kilian

1 0

A note on updating Slurm from 23.02 to 24.05 & multi-cluster
by Ward Poelmans 26 Sep '24

26 Sep '24

Hi all, We hit a snag when updating our clusters from Slurm 23.02 to 24.05. After updating the slurmdbd, our multi cluster setup was broken until everything was updated to 24.05. We had not anticipated this. SchedMD says that fixing it would be a very complex operation. Hence, this warning to everybody on planning to update: make sure to quickly updating everything once you've updated the slurmdbd daemon. Reference: https://support.schedmd.com/show_bug.cgi?id=20931 Ward

3 3

Jobs pending with reason "priority" but nodes are idle
by Long, Daniel S. 25 Sep '24

25 Sep '24

Hi, On our cluster we have some jobs that are queued even though there are available nodes to run on. The listed reason is "priority" but that doesn't really make sense to me. Slurm isn't picking another job to run on those nodes; it's just not running anything at all. We do have a quite heterogeneous cluster, but as far as I can tell the queued jobs aren't requesting anything that would preclude them from running on the idle nodes. They are array jobs, if that makes a difference. Thanks for any help you all can provide.

3 6

Max TRES per user and node
by Guillaume COCHARD 25 Sep '24

25 Sep '24

Hello, We are looking for a method to limit the TRES used by each user on a per-node basis. For example, we would like to limit the total memory allocation of jobs from a user to 200G per node. There is MaxTRESperNode (https://slurm.schedmd.com/sacctmgr.html#OPT_MaxTRESPerNode), but unfortunately, this is a per-job limit, not per user. Ideally, we would like to apply this limit on partitions and/or QoS. Does anyone know if this is possible and how to achieve it? Thank you,

4 9

SLURM Telegraf Plugin
by Pablo Collado Soto 25 Sep '24

25 Sep '24

Hi all, I recently wrote an SLURM input plugin [0] for Telegraf [1]. I just wanted to let the community know so that you can use it if you'd find that useful. Maybe its existence can also be included in the documentation somewhere? Anyway, thanks a ton for your time, Pablo Collado Soto References: 0: https://github.com/influxdata/telegraf/tree/master/plugins/inputs/slurm 1: https://www.influxdata.com/time-series-platform/telegraf/ + -------------------------------------- + | Never let your sense of morals prevent | | you from doing what is right. | | -- Salvor Hardin, "Foundation" | + -------------------------------------- +

2 1

Setting up fairshare accounting
by tluchko 24 Sep '24

24 Sep '24

Hello, We have a new cluster and I'm trying to setup fairshare accounting. I'm trying to track CPU, MEM and GPU. It seems that billing for individual jobs is correct, but billing isn't being accumulated (TRESRunMin is always 0). In my slurm.conf, I think the relevant lines are AccountingStorageType=accounting_storage/slurmdbd AccountingStorageTRES=gres/gpu PriorityFlags=MAX_TRES PartitionName=gpu Nodes=node[1-7] MaxCPUsPerNode=384 MaxTime=7-0:00:00 State=UP TRESBillingWeights="CPU=1.0,MEM=0.125G,GRES/gpu=9.6" PartitionName=cpu Nodes=node[1-7] MaxCPUsPerNode=182 MaxTime=7-0:00:00 State=UP TRESBillingWeights="CPU=1.0,MEM=0.125G,GRES/gpu=9.6" I currently have one recently finished job and one running job. sacct gives $ sacct --format=JobID,JobName,ReqTRES%50,AllocTRES%50,TRESUsageInAve%50,TRESUsageInMax%50 JobID JobName ReqTRES AllocTRES TRESUsageInAve TRESUsageInMax ------------ ---------- -------------------------------------------------- -------------------------------------------------- -------------------------------------------------- -------------------------------------------------- 154 interacti+ billing=9,cpu=1,gres/gpu=1,mem=1G,node=1 billing=9,cpu=2,gres/gpu=1,mem=2G,node=1 154.interac+ interacti+ cpu=2,gres/gpu=1,mem=2G,node=1 cpu=00:00:00,energy=0,fs/disk=2480503,mem=3M,page+ cpu=00:00:00,energy=0,fs/disk=2480503,mem=3M,page+ 155 interacti+ billing=9,cpu=1,gres/gpu=1,mem=1G,node=1 billing=9,cpu=2,gres/gpu=1,mem=2G,node=1155.interac+ interacti+ cpu=2,gres/gpu=1,mem=2G,node=1 billing=9 seems correct to me, since I have 1 GPU allocated, which has the largest score of 9.6. However, sshare doesn't show anything in TRESRunMins sshare --format=Account,User,RawShares,FairShare,RawUsage,EffectvUsage,TRESRunMins%110 Account User RawShares FairShare RawUsage EffectvUsage TRESRunMins -------------------- ---------- ---------- ---------- ----------- ------------- -------------------------------------------------------------------------------------------------------------- root 21589714 1.000000 cpu=0,mem=0,energy=0,node=0,billing=0,fs/disk=0,vmem=0,pages=0,gres/gpu=0,gres/gpumem=0,gres/gpuutil=0 abrol_group 2000 0 0.000000 cpu=0,mem=0,energy=0,node=0,billing=0,fs/disk=0,vmem=0,pages=0,gres/gpu=0,gres/gpumem=0,gres/gpuutil=0 luchko_group 2000 21589714 1.000000 cpu=0,mem=0,energy=0,node=0,billing=0,fs/disk=0,vmem=0,pages=0,gres/gpu=0,gres/gpumem=0,gres/gpuutil=0 luchko_group tluchko 1 0.333333 21589714 1.000000 cpu=0,mem=0,energy=0,node=0,billing=0,fs/disk=0,vmem=0,pages=0,gres/gpu=0,gres/gpumem=0,gres/gpuutil=0 Why is TRESRunMin all 0 but RawUsage is not for tluchko? I have checked and slurmdbd is running. Thank you, Tyler Sent with [Proton Mail](https://proton.me/) secure email.

1 2

SLUG'24 presentation slides?
by Kilian Cavalotti 23 Sep '24

23 Sep '24

Hi SchedMD, I'm sure they will eventually, but do you know when the slides of the SLUG'24 presentation will be available online at https://slurm.schedmd.com/publications.html, like previous editions'? Thanks! -- Kilian

1 0

what updates NODEADDR
by Jakub Szarlat 21 Sep '24

21 Sep '24

Hi I'm using dynamic nodes with "slurmd -Z" with slurm 23.11.1. Firstly I find that when you do "scontrol show node" it shows the NODEADDR as ip rather than the NODENAME. Because I'm playing around with running this in containers on docker swarm I find this ip can be wrong. I can force it with scontrol update however after a while something updates it to something else again. Does anybody know if this is done by slurmd or slurmctld or something else? How can I stop this from happening? How can I get the node to register with the hostname rather than ip? cheers, Jakub

2 1

SLURM GRES reservation not working properly on 24.05.1
by Minulakshmi S 20 Sep '24

20 Sep '24

Hello, *Issue 1:* I am using slurm version 24.05.1 , my slurmd has a single node where I connect multiple gres by enabling the overscribe feature. I am able to use the advance reservation of gres only using *gres** name* (tres=gres/gpu:*SYSTEM12*). i.e while in reservation period , if other users submits job with SYSTEM12 , then slurm places this job in queue *user1@host$ srun --gres=gpu:SYSTEM12:1 hostname* *srun: job 333 queued and waiting for resources * but when other users just submit a job without any system name , slurm jobs goes through on that gres immediately even though it is reserved. *user1@host$ srun --gres=gpu:1 hostname * *mylinux.wbi.com <http://mylinux.wbi.com> * Also I can see GresUsed in busy mode using "*scontrol show node -d*" , this means the job is running on Gres/GPU and not on cpu etc. Same way , job submission based on Feature "rev1 in my case" is also going through even though it is reserved for other users in multiple partition slurm. *snippet of slurm.conf file* NodeName=cluster01 NodeAddr=cluster Port=6002CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=8 ThreadsPerCore=2 Feature="rev1" Gres=gpu:SYSTEM12:1 RealMemory=64171 State=IDLE *Issue 2:* while execution , Slurm o/p's some extra prints in the srun output user1@host$ srun --gres=gpu:1 hostname srun: error: extract_net_cred: net_cred not provided srun: error: Malformed RPC of type RESPONSE_NODE_ALIAS_ADDRS(3017) received srun: error: slurm_unpack_received_msg: [[inv1715771615.nxdi.us-aus01.nxp.com]:41242] Header lengths are longer than data received *mylinux.wbi.com <http://mylinux.wbi.com>* Regards, MS

1 0

Can't schedule on cloud node: State=IDLE+CLOUD+POWERED_DOWN+NOT_RESPONDING
by Xaver Stiensmeier 20 Sep '24

20 Sep '24

Dear slurm-user list, I have a cloud node that is powered up and down on demand. Rarely it can happen that slurm's resumeTimeout is reached and the node is therefore powered down. We have set ReturnToService=2 in order to avoid the node being marked down, because the instance behind that node is created on demand and therefore after a failure nothing stops the system to start the node again as it is a different instance. I thought this would be enough, but apparently the node is still marked with "NOT_RESPONDING" which leads to slurm not trying to schedule on it. After a while NOT_RESPONDING is removed, but I would like to move it directly from within my fail script if possible so that the node can return to service immediately and not be blocked by "NOT_RESPONDING". Best regards, Xaver

2 3

SlurmDBD errors
by Sajesh Singh 19 Sep '24

19 Sep '24

OS: CentOS 8.5 Slurm: 22.05 Recently upgraded to 22.05. Upgrade was successful, but after a while I started to see the following messages in the slurmdbd.log file: error: We have more time than is possible (9344745+7524000+0)(16868745) > 12362400 for cluster CLUSTERNAME(3434) from 2024-09-18T13:00:00 - 2024-09-18T14:00:00 tres 1 (this may happen if oversubscription of resources is allowed without Gang) We do have partitions with overlapping nodes, but do not have "Suspend,Gang" set as the global PreemptMode mode. It is currently set to requeue. I have also check sacct and there are no runaway jobs listed. Oversubscription is not enabled on any of the queues as well. Do I need to modify my slurm config to address or is this an error condition caused by the upgrade? Thank you, SS

2 2

Change a job from --exclusive to --exclusive=user
by Gerhard Strangar 18 Sep '24

18 Sep '24

Hello, is it possible to change a pending job from --exclusive to --exclusive=user? I tried scontrol update jobid=... oversubscribe=user, but it seems to only accept yes or no. Gerhard

1 0

Feature request: Max Jobs Per Minute
by Ransom, Geoffrey M. 16 Sep '24

16 Sep '24

Hello We have another batch of new users and some more batches of large array jobs with very short runtimes due to errors in the jobs or just by design. Trying to deal with these issues, Setting ArrayTaskThrottle and user education, I had a thought that it would be very nice to have a limit on how many jobs can start in a given minute for users, so if they posted a 200000 array job with 15 second tasks then the scheduler wouldn't launch more than a 100 or 200 per minute and be less likely to bog down, but if they had longer runtimes (1 hour +) it would take a few extra minutes to start using all the resources they are allowed to but not add much overall delay to the whole set of jobs. I thought about adding something to our CLI filter, but usually these jobs are asking for a runtime of 3-4 hours even though they run for <30 seconds so the submit options don't indicate the problem jobs ahead of time. We currently limit our users to %80 of the available resources which is way more than slurm needs to bog down with fast turnover jobs, but we have users who complain that they can't use that other 20% when the cluster is not busy so putting in lower default restrictions is not currently an option. Has this already been discussed and isn't feasible for technical reasons? (Not finding anything like this yet searching the archives) I think slurm used have a feature request severity on their bug submission site. Is there a severity level they prefer to have suggested requests like this? Thanks

2 2

Detailed locations for SLUG'24
by Bjørn-Helge Mevik 10 Sep '24

10 Sep '24

Dear all SLUG attendees! The information about which buildings/addresses the SLUG reception and presentations are to be held is not very visible on the https://slug24.splashthat.com. There is a map there with all locations (https://www.google.com/maps/d/u/0/edit?mid=1bcGaTiW0TNB5noQsjQ3ulctzKuqlGrQ…), but I've gotten questions about it, so: The reception on Wednesday will be held in the top floor of Oslo Science Park (Forskningsparken). Address: Gaustadalléen 21. There will be someone in the reception who can point you in the right direction. The presentations will be held in auditorium 3 in Helga Engs Hus ("Helga Eng's House"). Address: Sem Sælands vei 7. Lunch will be in the canteen in the same building. The closest subway station to both these buildings is Blindern Subway Station (Blindern T-banestasjon). Looking forward to see you there! -- Regards, Bjørn-Helge Mevik, dr. scient, Department for Research Computing, University of Oslo

1 1

2025

2024

slurm-users ----- 2025 ----- May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users