- slurm-users - lists.schedmd.com

Re: Job information if job is completed
by Gestió Servidors 18 Jun '25

18 Jun '25

Hi, After reconfiguring slurm.conf to add script into the database, I have tried with a "normal" user to get that information (from a owned finished job). However, when I run "sacct -vvvv -B -j 92656", I get: sacct: Jobs Eligible in the time window from Epoch 0 to Wed Jun 18 15:33:03 2025 sacct: debug: Options selected: opt_completion=no opt_dup=no opt_field_list=User,JobID,Jobname%18,partition,state,time,submit,start,end,elapsed,nnodes,ncpus,nodelist, opt_help=0 opt_no_steps=yes opt_whole_hetjob=(null) sacct: debug: accounting_storage/slurmdbd: _connect_dbd_conn: Sent PersistInit msg sacct: debug2: Clusters requested: mycluster sacct: debug2: Userids requested: all sacct: debug2: Jobs requested: sacct: debug2: : 92656 sacct: error: Unknown error 1064 I have read that "sacct: error: Unknown error 1064" could be a error in the MySQL query syntax... but if I run same command "sacct -vvvv -B -j 92656" as root, I get submit script. I suppose problem is in database permissions, so I have added new permissions with "grant all on slurmdb.* TO 'user-sacct'@'localhost' identified by '..user-sacct..' with grant option;" (where user "user-sacct" is a user that acts as coordinator in SLURM). However, if I open a terminal with "user-sacct" and run "sacct -vvvv -B -j 92656", result is the same: "sacct: error: Unknown error 1064" How could give permissions to user-sacct to allow "sacct -B" command? Thanks.

1 0

Re: Job information if job is completed
by Gestió Servidors 18 Jun '25

18 Jun '25

Hello, So if there is no way to get all information from a finished job (specially submit script, not command line, but all content from submit script, like a copy of it), maybe a solution would be run a "prolog" script in each job to run a "cp" from the submit script. However, how could I copy the submit scrip from the prolog script? Because from the prolog script, I can access to some SLURM variables (https://slurm.schedmd.com/prolog_epilog.html) but I don't know how to know what the script is and run a simple "cp" to a destination folder. Thanks.

4 4

Job information if job is completed
by Gestió Servidors 17 Jun '25

17 Jun '25

Hello, Is there any way to get all information (like submit script or submit node) from a job that is completed? Something like "scontrol show jobid=XXX" when job is "running" or "pending". I need to inspect the submit script of a job but I only know job_id. Thanks.

5 4

Implementing a "soft" wall clock limit
by Davide DelVento 17 Jun '25

17 Jun '25

In the institution where I work, so far we have managed to live without mandatory wallclock limits (a policy decided well before I joined the organization), and that has been possible because the cluster was not very much utilized. Now that is changing, with more jobs being submitted and those being larger ones. As such I would like to introduce wallclock limits to allow slurm to be more efficient in scheduling jobs, including with backfill. My concern is that this user base is not used to it and therefore I want to make it easier for them, and avoid common complaints. I anticipate one of them would be "my job was cancelled even though there were enough nodes idle and no other job in line after mine" (since the cluster utilization is increasing, but not yet always full like it has been at most other places I know). So my question is: is it possible to implement "soft" wallclock limits in slurm, namely ones which would not be enforced unless necessary to run more jobs? In other words, is it possible to change the pre-emptability of a job only after some time has passed? I can think of some ways to hack this functionality myself with some cron or at jobs, and that might be easy enough to do, but I am not sure I can make it robust enough to cover all situations, so I'm looking for something either slurm-native or (if external solution) field-tested by someone else already, so that at least the worst kinks have been already ironed out. Thanks in advance for any suggestions you may provide!

5 11

Re: [EXT] Re: slurm_pam_adopt module not working
by Ratnasamy, Fritz 17 Jun '25

17 Jun '25

Yes the file exists in /usr/lib64/security/. Best, *Fritz Ratnasamy*Data Scientist Information Technology On Tue, Jun 17, 2025 at 12:17 AM Sean Crosby <scrosby(a)unimelb.edu.au> wrote: > Hi Fritz, > > Does pam_slurm_adopt.so exist in the right location on the node? Normally > on EL hosts it would be /usr/lib64/security/pam_slurm_adopt.so > > # ls /usr/lib64/security/pam_slurm_adopt.so -la > -rwxr-xr-x 1 root root 291936 Mar 4 12:44 > /usr/lib64/security/pam_slurm_adopt.so > > If the file doesn't exist, pam would abnormally exit and not allow anyone > to log in. > > Sean > ------------------------------ > *From:* Ratnasamy, Fritz via slurm-users <slurm-users(a)lists.schedmd.com> > *Sent:* Tuesday, 17 June 2025 14:55 > *To:* Kevin Buckley <kevin.buckley.pawsey.org.au(a)gmail.com> > *Cc:* slurm-users(a)lists.schedmd.com <slurm-users(a)lists.schedmd.com> > *Subject:* [EXT] [slurm-users] Re: slurm_pam_adopt module not working > > * External email: Please exercise caution * > ------------------------------ > Thanks, for some reason I edited the /etc/pam.d/sshd via ansible but that > locked all users to the cluster. That same file works on a different > cluster where the files are pushed via puppet but with ansible it looks > like it is locking all users to the cluster. See below config file sshd: > > auth required pam_sepermit.so > auth substack password-auth > auth include postlogin > # Used with polkit to reauthorize users in remote sessions > -auth optional pam_reauthorize.so prepare > account required pam_nologin.so > ##SLURM > account sufficient pam_slurm_adopt.so action_no_jobs=deny > action_unknown=newest action_adopt_failure=deny action_generic_failure=deny > account sufficient pam_access.so > ##END SLURM > password include password-auth > # pam_selinux.so close should be the first session rule > session required pam_selinux.so close > session required pam_loginuid.so > # pam_selinux.so open should only be followed by sessions to be executed > in the user context > session required pam_selinux.so open env_params > session required pam_namespace.so > session optional pam_keyinit.so force revoke > session include password-auth > session include postlogin > # Used with polkit to reauthorize users in remote sessions > -session optional pam_reauthorize.so prepare > > > > *Fritz Ratnasamy *Data Scientist > Information Technology > > > > > On Wed, Jun 11, 2025 at 8:29 PM Kevin Buckley via slurm-users < > slurm-users(a)lists.schedmd.com> wrote: > > On 2025/06/11 12:46, Ratnasamy, Fritz via slurm-users wrote: > > > > We wanted to block users from ssh to a node where there are no jobs > > running however it looks like users are able to do so. We have installed > > the slurm_pam_adopt_module and set up the slurm.conf accordingly (the > same > > way we did on our first cluster where the pam module denies ssh access > > correctly). > > We saw a similar issue whereby the way that we had PAM setup, meant > that, and here I quote from SchedMD's Daniel Armengod: > > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > This is almost certainly caused by the fact that SSH's > `keyboard-interactive` > (not to be confused with `password`) AuthMethod forks a short-lived child > process that is involved in the authentication logic. Slurm's > pam_slurm_adopt > module latches on to that process (which is the wrong one, of course) and > things break in interesting ways from there. > > SSH authmethods `publickey` and `password` do not exhibit this behaviour > as SSH > does not fork a child process to offload the authentication > challenge-response > dialogue to. > > ... > > The key bit here is that in your last test you're forcing > `PreferredAuthentications=password`, which isn't actually the > `keyboard-interactive` AuthMethod that got picked before. > They work differently under the hood, even if as far as the > user is concerned, both methods just ask for a password. > > ... > > In summary: try disabling the `keyboard-interactive` authentication method > in > your compute nodes. pam_slurm_adopt should work correctly now. > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > > Maybe that's also your issue. > > > Daniel did say that SchedMD were going to update their documentation > to make that distinction, and it's effect, more explciit, so I would > expect it to be in the mainstream docs by now. > > HTH > > -- > slurm-users mailing list -- slurm-users(a)lists.schedmd.com > To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com > CAUTION: This email has originated outside of University email systems. > Please do not click links or open attachments unless you recognize the > sender and trust the contents as safe. > > CAUTION: This email has originated outside of University email systems. > Please do not click links or open attachments unless you recognize the > sender and trust the contents as safe. > >

2 1

Re: slurm_pam_adopt module not working
by Ratnasamy, Fritz 17 Jun '25

17 Jun '25

Thanks, for some reason I edited the /etc/pam.d/sshd via ansible but that locked all users to the cluster. That same file works on a different cluster where the files are pushed via puppet but with ansible it looks like it is locking all users to the cluster. See below config file sshd: auth required pam_sepermit.so auth substack password-auth auth include postlogin # Used with polkit to reauthorize users in remote sessions -auth optional pam_reauthorize.so prepare account required pam_nologin.so ##SLURM account sufficient pam_slurm_adopt.so action_no_jobs=deny action_unknown=newest action_adopt_failure=deny action_generic_failure=deny account sufficient pam_access.so ##END SLURM password include password-auth # pam_selinux.so close should be the first session rule session required pam_selinux.so close session required pam_loginuid.so # pam_selinux.so open should only be followed by sessions to be executed in the user context session required pam_selinux.so open env_params session required pam_namespace.so session optional pam_keyinit.so force revoke session include password-auth session include postlogin # Used with polkit to reauthorize users in remote sessions -session optional pam_reauthorize.so prepare *Fritz Ratnasamy*Data Scientist Information Technology On Wed, Jun 11, 2025 at 8:29 PM Kevin Buckley via slurm-users < slurm-users(a)lists.schedmd.com> wrote: > On 2025/06/11 12:46, Ratnasamy, Fritz via slurm-users wrote: > > > > We wanted to block users from ssh to a node where there are no jobs > > running however it looks like users are able to do so. We have installed > > the slurm_pam_adopt_module and set up the slurm.conf accordingly (the > same > > way we did on our first cluster where the pam module denies ssh access > > correctly). > > We saw a similar issue whereby the way that we had PAM setup, meant > that, and here I quote from SchedMD's Daniel Armengod: > > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > This is almost certainly caused by the fact that SSH's > `keyboard-interactive` > (not to be confused with `password`) AuthMethod forks a short-lived child > process that is involved in the authentication logic. Slurm's > pam_slurm_adopt > module latches on to that process (which is the wrong one, of course) and > things break in interesting ways from there. > > SSH authmethods `publickey` and `password` do not exhibit this behaviour > as SSH > does not fork a child process to offload the authentication > challenge-response > dialogue to. > > ... > > The key bit here is that in your last test you're forcing > `PreferredAuthentications=password`, which isn't actually the > `keyboard-interactive` AuthMethod that got picked before. > They work differently under the hood, even if as far as the > user is concerned, both methods just ask for a password. > > ... > > In summary: try disabling the `keyboard-interactive` authentication method > in > your compute nodes. pam_slurm_adopt should work correctly now. > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > > Maybe that's also your issue. > > > Daniel did say that SchedMD were going to update their documentation > to make that distinction, and it's effect, more explciit, so I would > expect it to be in the mainstream docs by now. > > HTH > > -- > slurm-users mailing list -- slurm-users(a)lists.schedmd.com > To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com > CAUTION: This email has originated outside of University email systems. > Please do not click links or open attachments unless you recognize the > sender and trust the contents as safe. > >

2 1

MIG H100 with xeon Intel
by Richard Lefebvre 17 Jun '25

17 Jun '25

I'm having problems with Autodetect=nvml in gres.conf. I get on the controller log the following: error: _check_core_range_matches_sock: gres/gpu GRES autodetected core affinity 16-31 on node node001 doesn't match socket boundaries. (Socket 0 is cores 0-31). Consider setting SlurmdParameters=l3cache_as_socket (recommended) or override this by manually specifying core affinity in gres.conf. I did set l3cache_as_socket in the slurm.conf of the node, but I still get the error on the slurm controler I'm running 24.11.5 on AlmaLinux 9.5 Richard

2 1

How are the results produced by 'seff'?
by Loris Bennett 12 Jun '25

12 Jun '25

Hi, With Slurm 24.11.5 for some jobs I am seeing differences between the memory usage reported by 'seff' and that shown by Prometheus as 'cgroup_memory_rss_bytes' (and ultimately reported by 'jobstats' [1]). Certainly at the University of Delft they seem to feel that the memory usage reported by 'seff' is unreliable [2]. Is that indeed the case? Cheers, Loris Footnotes: [1] https://github.com/PrincetonUniversity/jobstats [2] https://doc.dhpc.tudelft.nl/delftblue/Slurm-trouble-shooting/ -- Dr. Loris Bennett (Herr/Mr) FUB-IT, Freie Universität Berlin

1 0

slurm_pam_adopt module not working
by Ratnasamy, Fritz 11 Jun '25

11 Jun '25

Hi, We wanted to block users from ssh to a node where there are no jobs running however it looks like users are able to do so. We have installed the slurm_pam_adopt_module and set up the slurm.conf accordingly (the same way we did on our first cluster where the pam module denies ssh access correctly). We have PrologFlags=contain in slurm.conf and inside /etc/pam.d/sshd, we set the last row to : account sufficient pam_slurm_adopt.so action_no_jobs=deny action_unknown=newest action_adopt_failure=deny action_generic_failure=deny Are we missing anything? Thanks *Fritz Ratnasamy*Data Scientist Information Technology

3 2

CR_CPU used but only cores used
by Adrian Sevcenco 11 Jun '25

11 Jun '25

Hi! i have a weird situation in which only cores are used instead of CPUs this is Alma9/slurm 22.05.9 (the last one from epel) I have: conf.d/resources.conf 9:SelectType=select/cons_res conf.d/resources.conf 11:SelectTypeParameters=CR_CPU conf.d/resources.conf 5:TaskPluginParam=autobind=threads conf.d/resources.conf 2:TaskPlugin=task/affinity,task/cgroup cgroup.conf 2:ConstrainCores=no conf.d/parts_issaf.conf 8:PartitionName=CLUSTER DEFAULT=YES State=UP nodes=DEFAULT DefaultTime=240:00:00 MaxTime=480:00:00 LLN=yes MaxNodes=1 What am i missing? Why are only cores used? Thanks a lot!! Adrian

2 2

Restrict and prioritize usage of certain nodes according to accounts
by thomas.hartmann＠th-ht.de 09 Jun '25

09 Jun '25

Hi, I'm going to have the following situation on my hands and I would like to ask for some suggestions how to solve this in slurm. We're talking about a cluster that is not yet operational so there are no real legacy configs that one needs to take into account. I have two sets of physical nodes: 1. node01 - nodeXX: General Purpose Nodes. Everybody can use them 2. project_A_01 - project_A_XX: These nodes come with some restrictions regarding who can and who must not run jobs on them. Users are organized into accounts, pseudohierarchically representing workgroups / projects etc within the university. For instance, there is going to be a "physics" account with "project_blackhole", "workgroup_miller" as children. Users are associated with one or more accounts. I have three sets of accounts (each can have child accounts): 1. "General" accounts: These are allowed to use all physical nodes. 2. "ForProfit" accounts: These absolutely must not use the project_A_* nodes 3. "Project_A" accounts: Their jobs should run first and foremost on the project_A_* nodes but they are also allowed to run on the node* nodes. My first idea would be to create two partitions, one with all nodes in there and a second one with only those nodes that the "ForProfit" are allowed to use. Using "AllowAccounts" or "DenyAccounts" would implement the restriction I need. In the future, there might be more project specific nodes for other projects. I would be grateful for any alternative solution or hints, how this could be solved optimally. Thanks a lot! Thomas

5 4

Problem querying slurm batch script archive
by Davide DelVento 09 Jun '25

09 Jun '25

I configured slurm.conf on our machine with AccountingStoreFlags=job_script,job_comment So that people can run sacct -Bj <job_ID> and check what the batch script was for the specified job_ID. This works fine for root and works great for many users (who can see their own job scripts, but not those of other users, as it ought to be). Unfortunately, for several users (but not even close to half of the users of the machine), the sacct -Bj command returns nothing, like if they queried someone else's job, even when querying their own. Does anybody have any clue on what might be wrong and triggering this odd behavior? Thanks!

1 0

seff command not found
by Ratnasamy, Fritz 09 Jun '25

09 Jun '25

Hi, We installed a new slurm version and it returns "command not found" for seff. I do not remember doing any manual installation for the previous versions, I thought it was coming with sacct, sbatch, ect... Any idea how I would need to set it up? I read online seff is actually a perl script. Best, *Fritz Ratnasamy*Data Scientist Information Technology

3 2

Re: Integration testing of Slinky images
by Nicolas Bock 06 Jun '25

06 Jun '25

Hi Brian, sorry for breaking the email thread, my subscription settings were not set correctly and I didn't receive your response as email. Thanks for the tips! I'll give that a try. Best, Nick > Nick, > Presuming you have followed the SchedMD instructions, you should be able > to get a session in your login container: > kubectl --namespace=slurm exec -it statefulsets/slurm-controller -- bash > --login > From there, you can do any standard testing you like. Simple 'srun > hostname' should work to let you know slurm itself is doing it's part. > You can also do commands such as 'scontrol show nodes' to see what and > how many resources you have configured. > Outside that, you need to ensure you have configured your slurm > containers to request the resources you plan on using (eg: gpus) and > that you have enough of them for the script(s) you wish to run. > Brian Andrus

1 0

X11 Forwarding Crashes X Session for too large windows
by Felix Winterhalter 06 Jun '25

06 Jun '25

Hello everyone, we have run into a peculiar issue with our setup. First and foremost let me say that X forwarding using ssh -X or ssh -Y works fine and doesn't show any irregularities. Trying to use the X forwarding of slurm however results in a weird situation. We are using it like: srun --pty --x11 bash And then run something like glxgears. The program starts up normal however whenever you increase the window size beyond a certain size the connection to the X server gets broken and glxgears crashes. The same is true for any other program using X, some don't even start as their inital window size is too large, others crash as soon as you resize them beyond a certain point. We have no clue what might be the cause only that it seems to be related to how slurm does the XForwarding. We've tried X11Parameters both with and without host_authority. We're running 25.05.0 Any help or idea would be very appreciated. Cheers, Felix This message and any attachments are for the sole use of the intended recipient(s). It may contain information that is confidential and privileged. If you are not the intended recipient of this message, you are prohibited from printing, copying, forwarding or saving it. Please delete the message and attachments and notify the sender immediately.

1 1

Integration testing of Slinky images
by Nicolas Bock 06 Jun '25

06 Jun '25

Hi, I was wondering whether there is any integration testing done on the containers and the operator published under the slinky project. Or asked differently, once I have deployed slinky, what tests should I run to confirm that the cluster is working as intended? Thanks! Nick

2 1

X11 performance terrible using plugin
by Simon Andrews 06 Jun '25

06 Jun '25

On our cluster we've noticed that if we use the native x11 slurm plugin (PrologFlags=x11) then X applications work, but are really slow and unresponsive. Even opening menus on graphical application is painfully slow. On the same system if I do a direct ssh connection with ssh -YC from the head node the same applications are quick and responsive. Any suggestions for what might be causing this, and how I can get the native x11 to have the same responsiveness as a direct ssh connection? Many thanks Simon.

6 8

Transfer from GPFS via slurm
by Ratnasamy, Fritz 06 Jun '25

06 Jun '25

Hi, We were told by our hardware provider that large datasets copied from NFS location to GPFS could be conducted via slurm to monitor the transfer. I am not sure of this works as I could not find much online. Otherwise apart from globus and rsync, what would you suggest as a tool/command to copy files from on a cluster between NFS and GPFS? Best, *Fritz Ratnasamy*Data Scientist Information Technology

2 1

Changing account names in sacctmgr
by Burian, John 05 Jun '25

05 Jun '25

All, For reasons I won’t go into, we find we need to change the POSIX group names for all of our users. My understanding is that in the absence of an --account option, sbatch/salloc assumes the account is the user’s primary POSIX group. So, to change group names, we’ll need to change the account names on all the associations in sacctmgr. And ideally, we would change account names in accounting records so we don’t lose accounting history. One is tempted to get into the Slurm DB and start running SQL updates. Is that path too fraught with peril to consider? Or should I just recreate the associations with the new names and take my lumps on the accounting history? John

4 4

error building debug packages on ubuntu 24.04
by Charles Hedrick 03 Jun '25

03 Jun '25

It was unable to find lib/security/pam_slurm_adopt.so It was built as lib64/security, not lib/security. ./debian/slurm-smd-libpam-slurm-adopt.install needs to be lib64/security/pam_slurm_adopt.so More likely, it needs to be built dynamically, so it will work everywhere.

1 0

Slurm version 25.05 is now available
by Tim Wickberg 29 May '25

29 May '25

We are pleased to announce the availability of Slurm 25.05. The release notes summarizing the new features, and including links to the corresponding documentation, can be found at: https://slurm.schedmd.com/release_notes.html A more extensive list of changes are available in the CHANGELOG: https://github.com/SchedMD/slurm/blob/slurm-25.05/CHANGELOG/slurm-25.05.md The Slurm documentation has also been updated to the 25.05 release: https://slurm.schedmd.com Slurm can be downloaded from: https://www.schedmd.com/download-slurm/ -- Tim Wickberg Chief Technology Officer, SchedMD LLC Commercial Slurm Development and Support

1 0

Slurm accounts managed via ansible
by Ratnasamy, Fritz 28 May '25

28 May '25

Hi, I was wondering whether there might be built in support for managing slurm accounts,users,associations in ansible. it would be nice to be able to organize accounts in a yaml style file and modify accounts settings via gitlab CI/CD. For example, in a format as such: accounts: - name: "Boss1" parent: "root" description: "Big Boos" fairshare: 20 - name: "UnderBoss1" parent: "root" description: "working for Boss1" fairshare: 1 users: -username: "user1" -username: "user2" *Fritz Ratnasamy* Data Scientist Information Technology

3 2

Account getting duplicated
by Ratnasamy, Fritz 27 May '25

27 May '25

Hi, the slurm db duplicates all our account associations. one with cluster=cluster and another where cluster=venus (which is our actual cluster). is that intended? Or should I make any changes? *Fritz Ratnasamy*Data Scientist Information Technology

2 1

Slurm Reporting Difference between sreport and sacct
by Passant Hafez 23 May '25

23 May '25

Hi all, I was wondering if someone can help explaining this discrepancy. I have different values for project gpu consumption using sreport vs sacct (+ some calculations) This is an example that shows this: sreport -t hours -T gres/gpu cluster AccountUtilizationByuser start=2025-04-01 end=2025-04-05 | grep project1234 gives 178 while sacct -n -X --allusers --accounts=project1234 --start=2025-04-01 --end=2025-04-05 -o elapsedraw,AllocTRES%80,user,partition gives 213480 billing=128,cpu=128,gres/gpu=8,mem=1000G,node=2 gpuplus 249507 billing=128,cpu=128,gres/gpu=8,mem=1000G,node=2 gpuplus 13908 billing=64,cpu=64,gres/gpu=4,mem=500G,node=1 gpuplus 9552 billing=64,cpu=64,gres/gpu=4,mem=500G,node=1 gpuplus 4 billing=16,cpu=16,gres/gpu=1,mem=200G,node=1 gpu 11 billing=16,cpu=16,gres/gpu=1,mem=200G,node=1 gpu ... I will not bore you with the full output and its calculation, but the first job alone consumed 213480 seconds/60/60 * 8 gpus that's 474.4 gpu hours which is way more than the 178 hrs reported by sreport Any clue why these are inconsistent? or how sreport calculated the 178 value? All the best, Passant

3 3

Crash in "slurmd -C" when latest NVIDIA drivers are used
by Taras Shapovalov 22 May '25

22 May '25

Hello, Does someone have idea why "slurmd -C" crashes when it unloads gpu_nrt.so with latest NVIDIA drivers (570 and 575)? We checked, there is no crash in cuda at the moment and gpu_nvml.so works fine, all nvml calls finish successfully, dlclose on gpu_nvml.so works fine. The crash does not depend whether real GPUs present or not. Steps to reproduce: 1. Install Ubuntu 24.04 2. wget https://download.schedmd.com/slurm/slurm-24.11.4.tar.bz2<https://download.schedmd.com/slurm/slurm-24.11.4.tar.bz2;> 3. tar fx ./slurm-24.11.4.tar.bz2 4. cd slurm-24.11.4 5. apt-get install cuda-12-8 hwloc libmunge-dev -y 6. ./configure 7. make && make install 8. Run "slurmd -C", or sometimes "slurmd -vvv -C" to get the crash. Stack trace: #0 0x0000155555544b2a strlen (ld-linux-x86-64.so.2 + 0x28b2a) #1 0x000015555551fc08 __GI__dl_exception_create (ld-linux-x86-64.so.2 + 0x3c08) #2 0x000015555551d298 __GI__dl_signal_error (ld-linux-x86-64.so.2 + 0x1298) #3 0x000015555551e81d _dl_close (ld-linux-x86-64.so.2 + 0x281d) #4 0x000015555551d51c __GI__dl_catch_exception (ld-linux-x86-64.so.2 + 0x151c) #5 0x000015555551d669 _dl_catch_error (ld-linux-x86-64.so.2 + 0x1669) #6 0x0000155554e97c73 _dlerror_run (libc.so.6 + 0x97c73) #7 0x0000155554e979a6 __dlclose (libc.so.6 + 0x979a6) #8 0x0000155555388a25 gpu_plugin_fini (libslurmfull.so + 0x188a25) #9 0x000015555538f2ef gres_get_autodetected_gpus (libslurmfull.so + 0x18f2ef) #10 0x0000555555564828 _print_config (slurmd + 0x10828) #11 0x0000155554e2a1ca __libc_start_call_main (libc.so.6 + 0x2a1ca) #12 0x0000155554e2a28b __libc_start_main_impl (libc.so.6 + 0x2a28b) #13 0x000055555555fc75 _start (slurmd + 0xbc75) I don't really think the problem is in gpu_nrt itself, seems the problem is in memory corruption somewhere else, but I am not sure. The issue is reproduced constantly. A Best regards, Taras

2 3

Wrong MaxRSS Behavior with cgroup v2 in Slurm
by Guillaume COCHARD 22 May '25

22 May '25

Hello, We've noticed a recent change in how MaxRSS is reported on our cluster. Specifically, the MaxRSS value for many jobs now often matches the allocated memory, which was not the case previously. It appears this change is due to how Slurm accounts for memory when copying large files, likely as a result of moving from cgroup v1 to cgroup v2. Here’s a simple example: copy_file.sh #!/bin/bash cp /distributed/filesystem/file5G /tmp cp /tmp/file5G ~ Two jobs with different memory allocations: Job 1 sbatch -c 1 --mem=1G copy_file.sh seff <jobid> Memory Utilized: 1021.87 MB Memory Efficiency: 99.79% of 1.00 GB Job 2 sbatch -c 1 --mem=10G copy_file.sh seff <jobid> Memory Utilized: 4.02 GB Memory Efficiency: 40.21% of 10.00 GB With cgroup v1, this script typically showed minimal memory usage. Now, under cgroup v2, memory usage appears inflated and depends on the allocated memory, which seems wrong. I believe this behavior aligns with similar issues raised by the Kubernetes community [1], and is consistent with how memory.current behaves in cgroup v2 [3]. According to Slurm’s documentation about cgroup v2, "this plugin provides cgroup's memory.current value from the memory interface, which is not equal to the RSS value provided by procfs. Nevertheless it is the same value that the kernel uses in its OOM killer logic." [2] While technically correct, this seems to mark a significant change in what MaxRSS and "Memory Efficiency" actually measure and renders those metrics almost useless. Our Configuration: ProctrackType=proctrack/cgroup TaskPlugin=task/cgroup,task/affinity Question: Is there a way to restore more realistic MaxRSS values — specifically, ones that exclude file-backed page cache — while still using cgroup v2? Thanks, Guillaume References: [1] https://github.com/kubernetes/kubernetes/issues/118916 [2] https://slurm.schedmd.com/cgroup_v2.html#limitations [3] https://facebookmicrosites.github.io/cgroup2/docs/memory-controller.html

3 3

Slurm 24.11.x + pyxis + TaskProlog -> fail
by Stefan Staeglich 21 May '25

21 May '25

Hi, we are currently evaluating Slurm 24.11. We are using pyxis in our cluster and have encountered the following problem in connection with TaskProlog: https://github.com/NVIDIA/pyxis/issues/163 Do you know more about the problem and the cause? Best, Stefan

1 0

sacctmgr: error: Sending PersistInit msg: Connection refused
by Ratnasamy, Fritz 18 May '25

18 May '25

Hi, We are working on a test cluster with slurm 24.11.3 and I am getting this error message from the login or compute nodes (note that the error does not show when run from the controller node): sacctmgr list associations tree format=cluster,account,user,maxnodes sacctmgr: error: _open_persist_conn: failed to open persistent connection to host:localhost:6819: Connection refused sacctmgr: error: Sending PersistInit msg: Connection refused Does someone know how fix that issue? Thanks, *Fritz Ratnasamy*Data Scientist Information Technology

2 1

New version of slurm
by Ratnasamy, Fritz 16 May '25

16 May '25

Hi, I am trying to install the new version of slurm. Do you know if there is a way to find out what support is compiled into the executables? For example, apache has httpd -L which shows all the loaded modules. See below result: [image: image.png] *Fritz Ratnasamy*Data Scientist Information Technology

3 2

slurmdbd - error: We can't find assoc 1 on cluster slurm
by Edmundo Carmona Antoranz 14 May '25

14 May '25

Hello! We are hitting this problem when we are making a first run of slurmdbd: [2025-05-13T13:29:08.916] debug4: accounting_storage/as_mysql: _get_parent_id: 10(as_mysql_assoc.c:699) query select id_assoc, lineage from "slurm_assoc_table" where user='' and deleted!=1 and acct='root'; [2025-05-13T13:29:08.916] debug5: assoc_mgr_fill_in_assoc: looking for assoc of user=(null)(4294967294), acct=(null), cluster=slurm, partition=(null) [2025-05-13T13:29:08.916] debug2: _find_assoc_rec_id: no associations added yet [2025-05-13T13:29:08.916] error: We can't find assoc 1 on cluster slurm I checked and up to that moment the table slurm_assoc_table has not getting a record inserted after the table has been created. [root@ea-r9-29504-pid1 ~]# grep -C1 slurm_assoc_table /var/log/slurmdbd [2025-05-13T13:29:06.666] debug2: DBD_ADD_CLUSTERS: called in CONN 10 [2025-05-13T13:29:06.719] debug4: Table "slurm_assoc_table" doesn't exist, adding [2025-05-13T13:29:06.720] debug2: query alter table "slurm_assoc_table" modify `creation_time` bigint unsigned not null, modify `mod_time` bigint unsigned default 0 not null, modify `deleted` tinyint default 0 not null, modify `comment` text, modify `flags` int unsigned default 0 not null, modify `is_def` tinyint default 0 not null, modify `id_assoc` int unsigned not null auto_increment, modify `user` tinytext not null default '', modify `acct` tinytext not null, modify `partition` tinytext not null default '', modify `parent_acct` tinytext not null default '', modify `id_parent` int unsigned not null, modify `lineage` text, modify `lft` int not null default 0, modify `rgt` int not null default 0, modify `shares` int default 1 not null, modify `max_jobs` int default NULL, modify `max_jobs_accrue` int default NULL, modify `min_prio_thresh` int default NULL, modify `max_submit_jobs` int default NULL, modify `max_tres_pj` text not null default '', modify `max_tres_pn` text not null default '', modify `max_tres_mins_pj` text not null default '', modify `max_tres_run_mins` text not null default '', modify `max_wall_pj` int default NULL, modify `grp_jobs` int default NULL, modify `grp_jobs_accrue` int default NULL, modify `grp_submit_jobs` int default NULL, modify `grp_tres` text not null default '', modify `grp_tres_mins` text not null default '', modify `grp_tres_run_mins` text not null default '', modify `grp_wall` int default NULL, modify `priority` int unsigned default NULL, modify `def_qos_id` int default NULL, modify `qos` blob not null default '', modify `delta_qos` blob not null default '', drop primary key, add primary key (id_assoc), drop index udex, add unique index udex (user(42), acct(42), `partition`(42)), drop key lft, add key lft (lft), drop key account, add key account (acct(42)); [2025-05-13T13:29:06.729] debug3: query insert into table_defs_table (creation_time, mod_time, table_name, definition) values (1747135746, 1747135746, '"slurm_assoc_table"', 'alter table \"slurm_assoc_table\" modify `creation_time` bigint unsigned not null, modify `mod_time` bigint unsigned default 0 not null, modify `deleted` tinyint default 0 not null, modify `comment` text, modify `flags` int unsigned default 0 not null, modify `is_def` tinyint default 0 not null, modify `id_assoc` int unsigned not null auto_increment, modify `user` tinytext not null default \'\', modify `acct` tinytext not null, modify `partition` tinytext not null default \'\', modify `parent_acct` tinytext not null default \'\', modify `id_parent` int unsigned not null, modify `lineage` text, modify `lft` int not null default 0, modify `rgt` int not null default 0, modify `shares` int default 1 not null, modify `max_jobs` int default NULL, modify `max_jobs_accrue` int default NULL, modify `min_prio_thresh` int default NULL, modify `max_submit_jobs` int default NULL, modify `max_tres_pj` text not null default \'\', modify `max_tres_pn` text not null default \'\', modify `max_tres_mins_pj` text not null default \'\', modify `max_tres_run_mins` text not null default \'\', modify `max_wall_pj` int default NULL, modify `grp_jobs` int default NULL, modify `grp_jobs_accrue` int default NULL, modify `grp_submit_jobs` int default NULL, modify `grp_tres` text not null default \'\', modify `grp_tres_mins` text not null default \'\', modify `grp_tres_run_mins` text not null default \'\', modify `grp_wall` int default NULL, modify `priority` int unsigned default NULL, modify `def_qos_id` int default NULL, modify `qos` blob not null default \'\', modify `delta_qos` blob not null default \'\', drop primary key, add primary key (id_assoc), drop index udex, add unique index udex (user(42), acct(42), `partition`(42)), drop key lft, add key lft (lft), drop key account, add key account (acct(42));') on duplicate key update definition='alter table \"slurm_assoc_table\" modify `creation_time` bigint unsigned not null, modify `mod_time` bigint unsigned default 0 not null, modify `deleted` tinyint default 0 not null, modify `comment` text, modify `flags` int unsigned default 0 not null, modify `is_def` tinyint default 0 not null, modify `id_assoc` int unsigned not null auto_increment, modify `user` tinytext not null default \'\', modify `acct` tinytext not null, modify `partition` tinytext not null default \'\', modify `parent_acct` tinytext not null default \'\', modify `id_parent` int unsigned not null, modify `lineage` text, modify `lft` int not null default 0, modify `rgt` int not null default 0, modify `shares` int default 1 not null, modify `max_jobs` int default NULL, modify `max_jobs_accrue` int default NULL, modify `min_prio_thresh` int default NULL, modify `max_submit_jobs` int default NULL, modify `max_tres_pj` text not null default \'\', modify `max_tres_pn` text not null default \'\', modify `max_tres_mins_pj` text not null default \'\', modify `max_tres_run_mins` text not null default \'\', modify `max_wall_pj` int default NULL, modify `grp_jobs` int default NULL, modify `grp_jobs_accrue` int default NULL, modify `grp_submit_jobs` int default NULL, modify `grp_tres` text not null default \'\', modify `grp_tres_mins` text not null default \'\', modify `grp_tres_run_mins` text not null default \'\', modify `grp_wall` int default NULL, modify `priority` int unsigned default NULL, modify `def_qos_id` int default NULL, modify `qos` blob not null default \'\', modify `delta_qos` blob not null default \'\', drop primary key, add primary key (id_assoc), drop index udex, add unique index udex (user(42), acct(42), `partition`(42)), drop key lft, add key lft (lft), drop key account, add key account (acct(42));', mod_time=1747135746; [2025-05-13T13:29:06.775] debug4: Table "slurm_assoc_usage_day_table" doesn't exist, adding -- [2025-05-13T13:29:08.916] debug4: accounting_storage/as_mysql: _get_parent_id: 10(as_mysql_assoc.c:699) query select id_assoc, lineage from "slurm_assoc_table" where user='' and deleted!=1 and acct='root'; [2025-05-13T13:29:08.916] debug5: assoc_mgr_fill_in_assoc: looking for assoc of user=(null)(4294967294), acct=(null), cluster=slurm, partition=(null) -- [2025-05-13T13:29:08.921] debug4: accounting_storage/as_mysql: _set_assoc_lft_rgt: 10(as_mysql_assoc.c:737) query select lft, rgt from "slurm_assoc_table" where id_assoc=2; [2025-05-13T13:29:08.922] debug4: accounting_storage/as_mysql: _make_sure_user_has_default_internal: 10(as_mysql_assoc.c:401) query select distinct is_def, acct from "slurm_assoc_table" where user='root' and deleted!=1 ORDER BY is_def desc, creation_time desc LIMIT 1; [2025-05-13T13:29:08.924] debug4: accounting_storage/as_mysql: as_mysql_add_assocs: 10(as_mysql_assoc.c:3999) query Even though the message shows up in the logs as an _error_, the service is able to come up fine, by the way, but is there an easy way to avoid the error message in the first place? BR!

1 0

Slurm release candidate version 25.05.0rc1 is available for testing
by Marshall Garey 13 May '25

13 May '25

We are pleased to announce the availability of Slurm release candidate 25.05.0rc1. To highlight some new features coming in 25.05: - Support for defining multiple topology configurations, and varying them by partition. - Support for tracking and allocating hierarchical resources. - Dynamic nodes can be dynamically added to the topology. - topology/block - Allow for gaps in the block layout. - Support for encrypting all network communication with TLS. - jobcomp/kafka - Optionally send job info at job start as well as job end. - Support an OR operator in --license requests. - switch/hpe_slingshot - Support for > 252 ranks per node. - switch/hpe_slingshot - Support mTLS authentication to the fabric manager. - sacctmgr - Add support for dumping and loading QOSes. - srun - Add new --wait-for-children option to keep the step running until all launched processes have been launched (cgroup/v2 only). - slurmrestd - Add new endpoint for creating reservations. This is the first release candidate of the upcoming 25.05 release series, and represents the end of development for this release, and a finalization of the RPC and state file formats. If any issues are identified with this release candidate, please report them through https://bugs.schedmd.com against the 25.05.x version and we will address them before the first production 25.05.0 release is made. Please note that the release candidates are not intended for production use. A preview of the updated documentation can be found at https://slurm.schedmd.com/archive/slurm-master/ . Slurm can be downloaded from https://www.schedmd.com/download-slurm/. The changelog for 25.05.0rc1 can be found here: https://github.com/SchedMD/slurm/blob/master/CHANGELOG/slurm-25.05.md#chang… -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support

1 0

Performance Issues after Update to 24.11.5
by Tilman Hoffbauer 13 May '25

13 May '25

Hello, we are running a SLURM-managed cluster with one control node (g-vm03) and 26 worker nodes (ouga[03-28]) on Rocky 8. We recently updated from 20.11.9 through 23.02.8 to 24.11.0 and then 24.11.5. Since then, we are experiencing performance issues - squeue and scontrol ping are slow to react and sometimes deliver "timeout on send/recv" messages, even with only very few parallel requests. We did not experience these issues with SLURM 20.11.9 before, we did not check the intermediate version 23.02.8 in detail before. In the log of slurmctld, we can also find messages like slurmctld: error: slurm_send_node_msg: [socket:[1272743]] slurm_bufs_sendto(msg_type=RESPONSE_JOB_INFO) failed: Unexpected missing socket error We thus implemented all recommendations from the high throughput documentation, and did achieve improvements with it (most notably by increasing the maximum number of open files and increasing MessageTimeout and TCPTimeout). For debugging, I attached the slurm.conf, the sdiag output (the server thread count is almost always 1 and sometimes increases to 2), the slurmctld log and the slurmdbd log from a time of high load. We would be very thankful for any input on how restore the old performance. Kind Regards, Tilman Hoffbauer

2 4

Do I have to hold back RAM for worker nodes?
by Xaver Stiensmeier 13 May '25

13 May '25

Dear Slurm-User List, currently, in our slurm.conf, we are setting: SelectType: select/cons_tres SelectTypeParameters: CR_Core and in our node configuration /RealMemory /was basically reduced by an amount to make sure the node always had enough RAM to run the OS. However, this is apparently now how it is supposed to be done: Lowering RealMemory with the goal of setting aside some amount for the OS and not available for job allocations will not work as intended if Memory is not set as a consumable resource in *SelectTypeParameters*. So one of the *_Memory options need to be enabled for that goal to be accomplished. (https://slurm.schedmd.com/slurm.conf.html#OPT_RealMemory) This leads to four questions regarding holding back RAM for worker nodes. Answers/help with any of those questions would be appreciated. *1.* Is reserving enough RAM for the worker node's OS and slurmd actually a thing you have to manage? *2.* If so how can we reserve enough RAM for the worker node's OS and slurmd when using CR_Core? *3.* Is that maybe a strong argument against using CR_Core that we overlooked? And semi-related: https://slurm.schedmd.com/slurm.conf.html#OPT_RealMemory talks about taking a value in megabytes. *4.* Is RealMemory really expecting megabytes or is it mebibytes? Best regards, Xaver

6 8

slurm failing to start as it doesnt know its node name??????
by Steven Jones 12 May '25

12 May '25

Hi, I am not sure what i have missed but I am getting this error on a compute node. ====== root@vm01no16 ~]# systemctl status slurmd.service × slurmd.service - Slurm node daemon Loaded: loaded (/usr/lib/systemd/system/slurmd.service; enabled; preset: disabled) Active: failed (Result: exit-code) since Sun 2025-05-11 23:01:29 UTC; 15min ago Process: 1178 ExecStart=/usr/sbin/slurmd --systemd $SLURMD_OPTIONS (code=exited, status=1/FAILURE) Main PID: 1178 (code=exited, status=1/FAILURE) CPU: 3ms May 11 23:01:29 vm01no16.ods.vuw.ac.nz systemd[1]: Starting Slurm node daemon... May 11 23:01:29 vm01no16.ods.vuw.ac.nz slurmd[1178]: slurmd: fatal: Unable to determine this slurmd's NodeName May 11 23:01:29 vm01no16.ods.vuw.ac.nz slurmd[1178]: fatal: Unable to determine this slurmd's NodeName May 11 23:01:29 vm01no16.ods.vuw.ac.nz systemd[1]: slurmd.service: Main process exited, code=exited, status=1/FAIL> May 11 23:01:29 vm01no16.ods.vuw.ac.nz systemd[1]: slurmd.service: Failed with result 'exit-code'. May 11 23:01:29 vm01no16.ods.vuw.ac.nz systemd[1]: Failed to start Slurm node daemon. [root@vm01no16 ~]# uname -a Linux vm01no16.ods.vuw.ac.nz 5.14.0-503.40.1.el9_5.x86_64 #1 SMP PREEMPT_DYNAMIC Wed Apr 30 17:38:54 UTC 2025 x86_64 x86_64 x86_64 GNU/Linux [root@vm01no16 ~]# vi /etc/hosts [root@vm01no16 ~]# cat /etc/hostname vm01no16.ods.vuw.ac.nz [root@vm01no16 ~]# tail /etc/hosts # Entry for int01no9.ods.vuw.ac.nz 130.195.87.29 int01no9.ods.vuw.ac.nz int01no9.ods.vuw.ac.nz-default # Entry for vm01no13.ods.vuw.ac.nz 130.195.87.41 vm01no13.ods.vuw.ac.nz vm01no13.ods.vuw.ac.nz-default # Entry for vm01no14.ods.vuw.ac.nz 130.195.87.42 vm01no14.ods.vuw.ac.nz vm01no14.ods.vuw.ac.nz-default # Entry for vm01no15.ods.vuw.ac.nz 130.195.87.43 vm01no15.ods.vuw.ac.nz vm01no15.ods.vuw.ac.nz-default # Entry for vm01no16.ods.vuw.ac.nz 130.195.87.44 vm01no16.ods.vuw.ac.nz vm01no16.ods.vuw.ac.nz-default [root@vm01no16 ~]# ====== regards Steven Jones B.Eng (Hons) Technical Specialist - Linux RHCE Victoria University, Digital Solutions, Level 8 Rankin Brown Building, Wellington, NZ 6012 0064 4 463 6272

2 1

Slurm versions 24.11.5, 24.05.8, and 23.11.11 are now available (CVE-2025-43904)
by Tim Wickberg 07 May '25

07 May '25

Slurm versions 24.11.5, 24.05.8, and 23.11.11 are now available and include a fix for a recently discovered security issue. SchedMD customers were informed on April 23rd and provided a patch on request; this process is documented in our security policy. [1] A mistake with permission handling for Coordinators within Slurm's accounting system can allow a Coordinator to promote a user to Administrator. (CVE-2025-43904) Thank you to Sekou Diakite (HPE) for reporting this. Downloads are available at https://www.schedmd.com/downloads.php . Release notes follow below. - Tim [1] https://www.schedmd.com/security-policy/ -- Tim Wickberg Chief Technology Officer, SchedMD LLC Commercial Slurm Development and Support > * Changes in Slurm 24.11.5 > ========================== > -- Return error to scontrol reboot on bad nodelists. > -- slurmrestd - Report an error when QOS resolution fails for v0.0.40 > endpoints. > -- slurmrestd - Report an error when QOS resolution fails for v0.0.41 > endpoints. > -- slurmrestd - Report an error when QOS resolution fails for v0.0.42 > endpoints. > -- data_parser/v0.0.42 - Added +inline_enums flag which modifies the > output when generating OpenAPI specification. It causes enum arrays to not > be defined in their own schema with references ($ref) to them. Instead they > will be dumped inline. > -- Fix binding error with tres-bind map/mask on partial node allocations. > -- Fix stepmgr enabled steps being able to request features. > -- Reject step creation if requested feature is not available in job. > -- slurmd - Restrict listening for new incoming RPC requests further into > startup. > -- slurmd - Avoid auth/slurm related hangs of CLI commands during startup > and shutdown. > -- slurmctld - Restrict processing new incoming RPC requests further into > startup. Stop processing requests sooner during shutdown. > -- slurmcltd - Avoid auth/slurm related hangs of CLI commands during > startup and shutdown. > -- slurmctld: Avoid race condition during shutdown or reconfigure that > could result in a crash due delayed processing of a connection while > plugins are unloaded. > -- Fix small memleak when getting the job list from the database. > -- Fix incorrect printing of % escape characters when printing stdio > fields for jobs. > -- Fix padding parsing when printing stdio fields for jobs. > -- Fix printing %A array job id when expanding patterns. > -- Fix reservations causing jobs to be held for Bad Constraints > -- switch/hpe_slingshot - Prevent potential segfault on failed curl > request to the fabric manager. > -- Fix printing incorrect array job id when expanding stdio file names. > The %A will now be substituted by the correct value. > -- Fix printing incorrect array job id when expanding stdio file names. > The %A will now be substituted by the correct value. > -- switch/hpe_slingshot - Fix vni range not updating on slurmctld restart > or reconfigre. > -- Fix steps not being created when using certain combinations of -c and > -n inferior to the jobs requested resources, when using stepmgr and nodes > are configured with CPUs == Sockets*CoresPerSocket. > -- Permit configuring the number of retry attempts to destroy CXI service > via the new destroy_retries SwitchParameter. > -- Do not reset memory.high and memory.swap.max in slurmd startup or > reconfigure as we are never really touching this in slurmd. > -- Fix reconfigure failure of slurmd when it has been started manually and > the CoreSpecLimits have been removed from slurm.conf. > -- Set or reset CoreSpec limits when slurmd is reconfigured and it was > started with systemd. > -- switch/hpe-slingshot - Make sure the slurmctld can free step VNIs after > the controller restarts or reconfigures while the job is running. > -- Fix backup slurmctld failure on 2nd takeover. > -- Testsuite - fix python test 130_2. > -- Fix security issue where a coordinator could add a user with elevated > privileges. CVE-2025-43904. > * Changes in Slurm 24.05.8 > ========================== > -- Testsuite - fix python test 130_2. > -- Fix security issue where a coordinator could add a user with elevated > privileges. CVE-2025-43904. > * Changes in Slurm 23.11.11 > =========================== > -- Fixed a job requeuing issue that merged job entries into the same SLUID > when all nodes in a job failed simultaneously. > -- Add ABORT_ON_FATAL environment variable to capture a backtrace from any > fatal() message. > -- Testsuite - fix python test 130_2. > -- Fix security issue where a coordinator could add a user with elevated > privileges. CVE-2025-43904.

1 0

Lots of RPC calls and REQUEST_GETPW calls
by Guillette, Jeremy 07 May '25

07 May '25

Hello, I’m trying to figure out why we’ve been seeing an increase in network traffic in our AWS-based cluster, which uses Amazon’s parallel cluster tool. After an incident a couple weeks ago, I turned on debug2 logging on the slurmd processes, and I’m seeing huge numbers of `REQUEST_GETPW` and `REQUEST_GETGR` requests going to the slurmd processes. I briefly turned on debug2 logging for `slurmctld` as well, and I’m seeing lots of RPC calls, but not as many as the `REQUEST_GETPW` requests that I’ve seen on compute node slurmd processes. Here’s a sample from the slurmctld log: ``` [2025-04-28T15:11:05.436] debug2: _slurm_rpc_dump_partitions, size=1253 usec=20 [2025-04-28T15:11:05.450] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2971 [2025-04-28T15:11:05.451] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2971 [2025-04-28T15:11:05.451] debug2: _slurm_rpc_dump_partitions, size=1253 usec=16 [2025-04-28T15:11:05.461] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2788 [2025-04-28T15:11:05.461] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2788 [2025-04-28T15:11:05.461] debug2: _slurm_rpc_dump_partitions, size=1253 usec=12 [2025-04-28T15:11:05.517] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2916 [2025-04-28T15:11:05.518] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2916 [2025-04-28T15:11:05.518] debug2: _slurm_rpc_dump_partitions, size=1253 usec=14 [2025-04-28T15:11:05.628] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3405 [2025-04-28T15:11:05.629] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3405 [2025-04-28T15:11:05.629] debug2: _slurm_rpc_dump_partitions, size=1253 usec=14 [2025-04-28T15:11:05.740] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2189 [2025-04-28T15:11:05.740] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2189 [2025-04-28T15:11:05.740] debug2: _slurm_rpc_dump_partitions, size=1253 usec=15 [2025-04-28T15:11:05.845] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2209 [2025-04-28T15:11:05.846] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2209 [2025-04-28T15:11:05.846] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=4106 [2025-04-28T15:11:05.846] debug2: _slurm_rpc_dump_partitions, size=1253 usec=14 [2025-04-28T15:11:05.847] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=4106 [2025-04-28T15:11:05.847] debug2: _slurm_rpc_dump_partitions, size=1253 usec=11 [2025-04-28T15:11:05.938] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3400 [2025-04-28T15:11:05.938] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3400 [2025-04-28T15:11:05.938] debug2: _slurm_rpc_dump_partitions, size=1253 usec=18 [2025-04-28T15:11:06.903] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3449 [2025-04-28T15:11:06.904] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3449 [2025-04-28T15:11:06.904] debug2: _slurm_rpc_dump_partitions, size=1253 usec=15 [2025-04-28T15:11:07.175] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3722 [2025-04-28T15:11:07.176] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3722 [2025-04-28T15:11:07.177] debug2: _slurm_rpc_dump_partitions, size=1253 usec=254 [2025-04-28T15:11:07.205] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=4040 [2025-04-28T15:11:07.206] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=4040 [2025-04-28T15:11:07.206] debug2: _slurm_rpc_dump_partitions, size=1253 usec=17 [2025-04-28T15:11:07.237] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2990 [2025-04-28T15:11:07.238] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2990 [2025-04-28T15:11:07.239] debug2: _slurm_rpc_dump_partitions, size=1253 usec=15 [2025-04-28T15:11:07.284] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2920 [2025-04-28T15:11:07.285] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2920 [2025-04-28T15:11:07.285] debug2: _slurm_rpc_dump_partitions, size=1253 usec=15 [2025-04-28T15:11:07.370] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3236 [2025-04-28T15:11:07.371] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3236 [2025-04-28T15:11:07.371] debug2: _slurm_rpc_dump_partitions, size=1253 usec=17 [2025-04-28T15:11:08.463] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2848 [2025-04-28T15:11:08.464] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2848 [2025-04-28T15:11:08.464] debug2: _slurm_rpc_dump_partitions, size=1253 usec=14 [2025-04-28T15:11:08.691] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=2627 [2025-04-28T15:11:08.692] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=2627 [2025-04-28T15:11:08.692] debug2: _slurm_rpc_dump_partitions, size=1253 usec=18 [2025-04-28T15:11:08.873] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3729 [2025-04-28T15:11:08.874] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3729 [2025-04-28T15:11:08.875] debug2: _slurm_rpc_dump_partitions, size=1253 usec=196 [2025-04-28T15:11:08.881] debug2: Processing RPC: REQUEST_JOB_INFO_SINGLE from UID=3461 [2025-04-28T15:11:08.882] debug2: Processing RPC: REQUEST_PARTITION_INFO from UID=3461 [2025-04-28T15:11:08.882] debug2: _slurm_rpc_dump_partitions, size=1253 usec=10 ``` And from slurmd: ``` [2025-04-27T19:45:01.353] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.475] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.491] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.496] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.496] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:02.497] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:02.497] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:02.501] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.504] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.507] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.513] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.518] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.518] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:02.606] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:02.607] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:04.988] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:04.992] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:04.995] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:04.999] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.011] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.016] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.033] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.045] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.048] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.057] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.073] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.077] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.110] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.143] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.143] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.144] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:05.152] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.152] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:05.159] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.159] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.159] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:05.167] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.167] [59253.batch] debug: Handling REQUEST_GETGR [2025-04-27T19:45:05.170] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.172] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.174] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.203] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.204] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.207] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.316] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.318] [59253.batch] debug: Handling REQUEST_GETPW [2025-04-27T19:45:05.321] [59253.batch] debug: Handling REQUEST_GETPW ``` This level of debugging makes the logs pretty huge, but if seeing a whole log file is helpful, I can make something available. Any ideas on next steps for figuring out what’s going on? It seems like something is asking for authentication a whole lot, but it’s not clear to me what or why. We do use munge for Slurm authentication, and SSSD to work with LDAP for user authentication. -Jeremy Guillette — Jeremy Guillette Software Engineer, FAS Academic Technology | Academic Technology Harvard University Information Technology P: (617) 998-1826 | W: huit.harvard.edu (he/him/his)

4 6

Large memory jobs stuck Pending. Should use --time parameter?
by Mike 07 May '25

07 May '25

Greetings, We are new to Slurm and we are trying to better understand why we’re seeing high-mem jobs stuck in Pending state indefinitely. Smaller (mem) jobs in the queue will continue to pass by the high mem jobs even when we bump priority on a pending high-mem job way up. We have been reading over the backfill scheduling page and what we think we're seeing is that we need to require that users specify a --time parameter on their jobs so that Backfill works properly. None of our users specify a --time param because we have never required it. Is that what we need to require in order to fix this situation? From the backfill page: "Backfill scheduling is difficult without reasonable time limit estimates for jobs, but some configuration parameters that can help" and it goes on to list some config params that we have not set (DefaultTime, MaxTime, OverTimeLimit). We also see language such as, “Since the expected start time of pending jobs depends upon the expected completion time of running jobs, reasonably accurate time limits are important for backfill scheduling to work well.” So we suspect that we can achieve proper backfill scheduling by requiring that all users supply a "--time" parameter via a job submit plugin. Would that be a fair statement? Thank you in advance! -Mike Schor

4 4

Trying to using PMIx via srun for openmpi + pmix 5.0.7, PMIX ERROR: PMIX_ERR_FILE_OPEN_FAILURE in file gds_shmem2.c at line 1056 (but works with --mpi=pmix_v3?!)
by Dr. Thomas Orgis 06 May '25

06 May '25

Dear Slurm community, I am confused by the behaviour of a freshly built openmpi-5.0.7 with slurm-24.11.4. I can run a simple hello-world program via mpirun, but with really slow startup (a single process needing 1.6 s, 384 processes on two 192-core nodes need around half a minute). I guess there is a deeper issue here to work out with openmpi itself and why it needs 1.3 seconds to start a single process, even, outside a Slurm environment. So I investigate if running via srun changes things. Open-MPI docs recommend using mpirun and that has been traditionally our safe bet. But srun direct launch is supposed to work, too. I did duly build slurm-24.11.4 with ./configure --prefix=/syssw/slurm/24.11.4 \ --sysconfdir=/syssw/etc/slurm \ --with-munge=/syssw/munge/0.5.16 \ --with-hwloc=/syssw/hwloc/2.11.2 \ --disable-static --with-json \ --with-pmix=/syssw/pmix/3.2.5:/syssw/pmix/5.0.7 \ LDFLAGS=-Wl,--disable-new-dtags providing the two versions of pmix on our system currently. Now I am perplexed to observe that $ srun -vv --mpi=pmix_v5 -N 1 -n 1 mpihello does _not_ work, but produces c$ srun -vv -n 1 -N 1 --mpi=pmix_v5 mpihello srun: defined options srun: -------------------- -------------------- srun: (null) : n[164-165] srun: jobid : 671133 srun: job-name : interactive srun: mpi : pmix_v5 srun: nodes : 1 srun: ntasks : 1 srun: verbose : 2 srun: -------------------- -------------------- srun: end of defined options srun: debug: propagating SLURM_PRIO_PROCESS=0 srun: debug: propagating UMASK=0022 srun: jobid 671133: nodes(2):`n[164-165]', cpu counts: 192(x2) srun: debug: requesting job 671133, user 99, nodes 1 including ((null)) srun: debug: cpus 1, tasks 1, name mpihello, relative 65534 srun: CpuBindType=none srun: debug: Entering slurm_step_launch srun: debug: mpi/pmix_v5: pmixp_abort_agent_start: (null) [0]: pmixp_agent.c:417: Abort agent port: 36505 srun: debug: mpi/pmix_v5: _pmix_abort_thread: (null) [0]: pmixp_agent.c:356: Start abort thread srun: debug: mpi/pmix_v5: mpi_p_client_prelaunch: (null) [0]: mpi_pmix.c:282: setup process mapping in srun srun: debug: Entering _msg_thr_create() srun: debug: initialized stdio listening socket, port 38681 srun: debug: Started IO server thread srun: debug: Entering _launch_tasks srun: launching StepId=671133.3 on host n165, 1 tasks: 0 srun: topology/tree: init: topology tree plugin loaded srun: debug: launch returned msg_rc=0 err=0 type=8001 srun: Node n165, 1 tasks started [n165:2287661] PMIX ERROR: PMIX_ERR_FILE_OPEN_FAILURE in file gds_shmem2.c at line 1056 *** An error occurred in MPI_Init *** on a NULL communicator *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort, *** and MPI will try to terminate your MPI job as well) [n165:2287661] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed! srun: Received task exit notification for 1 task of StepId=671133.3 (status=0x0e00). srun: error: n165: task 0: Exited with exit code 14 srun: debug: task 0 done srun: debug: IO thread exiting srun: debug: mpi/pmix_v5: _conn_readable: (null) [0]: pmixp_agent.c:109: false, shutdown srun: debug: mpi/pmix_v5: _pmix_abort_thread: (null) [0]: pmixp_agent.c:363: Abort thread exit Observe the line [n165:2287661] PMIX ERROR: PMIX_ERR_FILE_OPEN_FAILURE in file gds_shmem2.c at line 1056 anyone got an idea what that means, by what it's caused? And, what really confuses me, is that the test program _does_ work if I switch from pmix_v5 to pmix_v3: $ srun -vv -n 1 -N 1 --mpi=pmix_v3 mpihello srun: defined options srun: -------------------- -------------------- srun: (null) : n[164-165] srun: jobid : 671133 srun: job-name : interactive srun: mpi : pmix_v3 srun: nodes : 1 srun: ntasks : 1 srun: verbose : 2 srun: -------------------- -------------------- srun: end of defined options srun: debug: propagating SLURM_PRIO_PROCESS=0 srun: debug: propagating UMASK=0022 srun: jobid 671133: nodes(2):`n[164-165]', cpu counts: 192(x2) srun: debug: requesting job 671133, user 99, nodes 1 including ((null)) srun: debug: cpus 1, tasks 1, name mpihello, relative 65534 srun: CpuBindType=none srun: debug: Entering slurm_step_launch srun: debug: mpi/pmix_v3: pmixp_abort_agent_start: (null) [0]: pmixp_agent.c:417: Abort agent port: 43737 srun: debug: mpi/pmix_v3: _pmix_abort_thread: (null) [0]: pmixp_agent.c:356: Start abort thread srun: debug: mpi/pmix_v3: mpi_p_client_prelaunch: (null) [0]: mpi_pmix.c:282: setup process mapping in srun srun: debug: Entering _msg_thr_create() srun: debug: initialized stdio listening socket, port 43805 srun: debug: Started IO server thread srun: debug: Entering _launch_tasks srun: launching StepId=671133.4 on host n164, 1 tasks: 0 srun: topology/tree: init: topology tree plugin loaded srun: debug: launch returned msg_rc=0 err=0 type=8001 srun: Node n164, 1 tasks started hello world from processor n164, rank 0 out of 1 srun: Received task exit notification for 1 task of StepId=671133.4 (status=0x0000). srun: n164: task 0: Completed srun: debug: task 0 done srun: debug: IO thread exiting srun: debug: mpi/pmix_v3: _conn_readable: (null) [0]: pmixp_agent.c:109: false, shutdown srun: debug: mpi/pmix_v3: _pmix_abort_thread: (null) [0]: pmixp_agent.c:363: Abort thread exit How can a PMIx 5 MPI even work with the pmix_v3 plugin? Why does it _not_ work with the pmix_v5 plugin? I am also curious why the plugins don't link to the respective libpmix (are they using dlopen for their dependencies? Why?). $ ldd /syssw/slurm/24.11.4/lib/slurm/mpi_pmix*.so /syssw/slurm/24.11.4/lib/slurm/mpi_pmix.so: linux-vdso.so.1 (0x00007ffd19ffb000) libhwloc.so.15 => /syssw/hwloc/2.11.2/lib/libhwloc.so.15 (0x000014d199e56000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x000014d199c70000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x000014d199b90000) /lib64/ld-linux-x86-64.so.2 (0x000014d199edd000) /syssw/slurm/24.11.4/lib/slurm/mpi_pmix_v3.so: linux-vdso.so.1 (0x00007ffd265f2000) libhwloc.so.15 => /syssw/hwloc/2.11.2/lib/libhwloc.so.15 (0x00001553902c8000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00001553900e2000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x0000155390002000) /lib64/ld-linux-x86-64.so.2 (0x0000155390350000) /syssw/slurm/24.11.4/lib/slurm/mpi_pmix_v5.so: linux-vdso.so.1 (0x00007ffd862b7000) libhwloc.so.15 => /syssw/hwloc/2.11.2/lib/libhwloc.so.15 (0x0000145adc36d000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x0000145adc187000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x0000145adc0a7000) /lib64/ld-linux-x86-64.so.2 (0x0000145adc3f4000) But they do have the proper RPATH set up: $ readelf -d /syssw/slurm/24.11.4/lib/slurm/mpi_pmix*.so | grep -e ^File -e PATH File: /syssw/slurm/24.11.4/lib/slurm/mpi_pmix.so 0x000000000000000f (RPATH) Library rpath: [/syssw/hwloc/2.11.2/lib:/syssw/pmix/5.0.7/lib] File: /syssw/slurm/24.11.4/lib/slurm/mpi_pmix_v3.so 0x000000000000000f (RPATH) Library rpath: [/syssw/hwloc/2.11.2/lib:/syssw/pmix/3.2.5/lib] File: /syssw/slurm/24.11.4/lib/slurm/mpi_pmix_v5.so 0x000000000000000f (RPATH) Library rpath: [/syssw/hwloc/2.11.2/lib:/syssw/pmix/5.0.7/lib] Which is important, since libpmix doesn't get sensible SONAME versioning (supposing they are supposed to be separate ABIs): $ find /syssw/pmix/* -name 'libpmix.so*' /syssw/pmix/3.2.5/lib/libpmix.so /syssw/pmix/3.2.5/lib/libpmix.so.2.2.35 /syssw/pmix/3.2.5/lib/libpmix.so.2 /syssw/pmix/5.0.7/lib/libpmix.so /syssw/pmix/5.0.7/lib/libpmix.so.2.13.7 /syssw/pmix/5.0.7/lib/libpmix.so.2 It's all libpmix.so.2. My mpihello program uses the 5.0.7 one, at least: $ ldd mpihello linux-vdso.so.1 (0x00007fff1f13f000) libmpi.so.40 => /sw/env/gcc-13.3.0/openmpi/5.0.7/lib/libmpi.so.40 (0x000014ed89d95000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x000014ed89baf000) libopen-pal.so.80 => /sw/env/gcc-13.3.0/openmpi/5.0.7/lib/libopen-pal.so.80 (0x000014ed89a25000) libfabric.so.1 => /syssw/fabric/1.21.0/lib/libfabric.so.1 (0x000014ed8989b000) libefa.so.1 => /lib/x86_64-linux-gnu/libefa.so.1 (0x000014ed8988d000) libibverbs.so.1 => /lib/x86_64-linux-gnu/libibverbs.so.1 (0x000014ed8986c000) libpsm2.so.2 => /syssw/psm2/12.0.1/lib/libpsm2.so.2 (0x000014ed89804000) libatomic.so.1 => /sw/compiler/gcc-13.3.0/lib64/libatomic.so.1 (0x000014ed897fb000) libnl-route-3.so.200 => /lib/x86_64-linux-gnu/libnl-route-3.so.200 (0x000014ed8976a000) libnl-3.so.200 => /lib/x86_64-linux-gnu/libnl-3.so.200 (0x000014ed89745000) libpmix.so.2 => /syssw/pmix/5.0.7/lib/libpmix.so.2 (0x000014ed8951e000) libevent_core-2.1.so.7 => /lib/x86_64-linux-gnu/libevent_core-2.1.so.7 (0x000014ed894e8000) libevent_pthreads-2.1.so.7 => /lib/x86_64-linux-gnu/libevent_pthreads-2.1.so.7 (0x000014ed894e3000) libhwloc.so.15 => /syssw/hwloc/2.11.2/lib/libhwloc.so.15 (0x000014ed89486000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x000014ed893a6000) /lib64/ld-linux-x86-64.so.2 (0x000014ed8a0d8000) libnuma.so.1 => /lib/x86_64-linux-gnu/libnuma.so.1 (0x000014ed89397000) Can someone shed light on how the differing PMIx plugins are supposed to work? Can someone share a setup where pmix_v5 does work with openmpi 5.x? Alrighty then, Thomas -- Dr. Thomas Orgis HPC @ Universität Hamburg

1 0

knl_generic.conf seems to be ignored and Slurm adopts default settings which specify Intel motherboard and syscfg - need help to figure out why Slurm is not reading my Dell knl_generic.conf parameters
by Bryan Johnston 01 May '25

01 May '25

Hi folks I'm in the process of standing up some Stampede2 Dell C3620p KNL nodes and I seem to be hitting a blind spot. I previously "successfully" configured KNL's on an Intel board (S7200AP), with OpenHPC and Rocky8. I say "successfully" because it works but evidently my latest troubleshooting has revealed that I may have been lucky rather than an expert KNL integrator :-) I thought I knew what I was doing, but after repeating my Intel KNL recipe with the Dell system, I have unearthed my ignorance with this wonderful (but deprecated) technology (anecdotally, the KNLs offer excellent performance and power efficiency for our workloads, particularly when contrasted with our alternative available hardware). The first discovery was the "syscfg" for Intel boards is not the same as the "syscfg" for Dell boards. I've since sorted this out. The second discovery was made while troubleshooting an issue that I'm hitting. After realising that the slurmd client nodes don't seem to be reading the "knl_generic.conf" parameters that are specified in /etc/slurm on the smshost (OpenHPC parlance for head node ... And it's a Slurm config less set up), I think my original Intel solution was working out of luck more than ingenuity. For reference , the Slurm configuration for KNL now includes: ``` NodeFeaturesPlugins=knl_generic DebugFlags=NodeFeatures GresTypes=hbm ``` And I've created a separate "knl_generic.conf" that points to the Dell specific tools and features. For the Dell system, slurmd seems to ignore my knl_generic.conf file and is drawing defaults from somewhere else. Slurm still considers SystemType to be Intel, SyscfgPath to be the default location, and SyscfgTimeout to be 1000. For Dell systems, Slurm needs to have SystemType=Dell and Timeout to be 1000. I don't understand why the nodes are not reading the knl_generic file - any help or clues would be appreciated. Here's my theory on what is happening: The Intel KNL system was successful by luck ... It probably exhibited the same ignore-the-config-file but ran default NodeFeatures for some generic knl_generic settings which are stored somewhere as default parameters. I must have just lucked out when I was using my Intel KNL system because it was using the defaults (that are compatible with Intel). If this assumption is correct, the Dell system is not working because it isn't compatible with the Intel defaults. Any clues on how to successfully invoke the config file (or better debuggingtechniwues to figure out why it isn't) would be appreciated. I can share journalctl feedback if necessary. For now, I've tried changing ownership of the config files to root:slurm, copied knl_generic.conf to the compute nodes' /etc/slurm/ and also tried to specify the config file by running (on the compute nodes) "slurmd" with "-f" ... No joy; if slurmd runs successfully (when I don't screw up some random experimental settings) then it always seems to ignore knl_generic.conf and loads some default settings from somewhere. A few questions: 1. Are there default settings stored somewhere? I might be barking up the wrong tree, although I've looked for files that may clash with the config file I've created but can't find any. 2. Is there a better way to force the knl_generic file to be loaded? 3. Is the configless Slurm somehow not reading the knl_generic file to the clients? I understand that all configuration files are read from the host server. Many thanks for any help! Regards / Groete / Sala(ni) Kahle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bryan Johnston Senior HPC Technologist II Lead: HPC Ecosystems Project HPCwire 2024's Outstanding Leader in HPC CHPC | www.chpc.ac.za | NICIS | nicis.ac.za Centre for High Performance Computing If you receive an email from me out of office hours for you, please do not feel obliged to respond during off-hours! Book time to meet with me<https://outlook.office.com/bookwithme/user/87af4906a703488386578f34e4473c74…>

1 1

Slurm and Kerberos/GSSAPI
by Burian, John 01 May '25

01 May '25

Does anyone have any experience with using Kerberos/GSSAPI and Slurm? I’m specifically wondering if there is a known mechanism for providing proper Kerberos credentials to Slurm batch jobs, such that those processes would be able to access a filesystem that requires Kerberos credentials. Some quick searching returned nothing useful. Interactive jobs have a similar problem, but I’m hoping that SSH credential forwarding can be leveraged there. I’m nothing like an expert in Kerberos, so forgive any apparent ignorance. Thanks, John

2 3

Can't specify multiple partitions when submitting GPU jobs
by milad＠earthspecies.org 29 Apr '25

29 Apr '25

Hi, I have defined a partition for each GPU type we have in the cluster. This was mainly because I have different Node types for each GPU type and I want to set `DefCpuPerGPU` `DefMemPerGPU` for each of them. Unfortunately one can't set them per node but can do that per partition. Now sometimes people don't care about the GPU type and would like any of the partitions to pick up the job. The `--partition` in `sbatch` does allow specifying multiple partitions and this works fine when I'm not specifying `--gpu`. However when I add do something like `sbatch -p A,B --gpus 1 script.sh` then I get "srun: job 6279 queued and waiting for resources" even though partition B does have a GPU to offer. Strangely if the first partition specified (i.e. A) had a free GPU it would allocate the GPU and run the job. Is this a bug? Perhaps related to this: https://groups.google.com/g/slurm-users/c/UOUVfkajUBQ

3 4

Re: Error "_check_core_range_matches_sock" when
by Gestió Servidors 29 Apr '25

29 Apr '25

Hello, Yes, I know system is single-socket, but in a similar computer, this configuration works fine... After some tests, I have realized that with SLURM 23.11.0 I can assign CPUs in "gres.conf" (and, then, use half CPU for one GPU and other half for other GPU), but with SLURM 24.11.4 I receive " _check_core_range_matches_sock". I have read "NEWS" file inside sources files in 24.11.4 tgz and it says: […] * Changes in Slurm 23.11.7 ========================== […] -- Fix issue that only left one thread on each core available when "CPUs=" is configured to total thread count on multi-threaded hardware and no other topology info ("Sockets=", "CoresPerSocket", etc.) is configured. […] So, I suppose, in version 23.11.7 SLURM corrected that behaviour. Could someone confirm that? Thanks.

1 0

Error "_check_core_range_matches_sock" when starting "slurmctld"
by Gestió Servidors 28 Apr '25

28 Apr '25

Hello, I have compiled SLURM-24.11.3 and I have configured two GPUs in my system (slurmctld and slurmd are running in the same computer). Computes has a old processor Intel i7 with 4 cores and 4 hyperthreading. Node is configured with "NodeName=mysystem CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2 RealMemory=7940 Gres=gpu:geforce_gtx_titan_x:1,gpu:geforce_gtx_titan_black:1". "lscpu" command returns: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 26 Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz BIOS Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz File gres.conf is: NodeName=mysystem Autodetect=off Name=gpu Type=geforce_gtx_titan_x File=/dev/nvidia0 CPUs=0-1 NodeName=mysystem Autodetect=off Name=gpu Type=geforce_gtx_titan_black File=/dev/nvidia1 CPUs=2-3 However, when I start daemon "slurmctld", system returns this error: [2025-04-28T09:35:41.003] error: _check_core_range_matches_sock: gres/gpu GRES core specification 0-1 for node aopcvis5 doesn't match socket boundaries. (Socket 0 is cores 0-3) [2025-04-28T09:35:41.003] error: Setting node aopcvis5 state to INVAL with reason:gres/gpu GRES core specification 0-1 for node aopcvis5 doesn't match socket boundaries. (Socket 0 is cores 0-3) Where is my configuration error? Thanks.

2 1

How can we put limits on interactive jobs?
by Ole Holm Nielsen 25 Apr '25

25 Apr '25

We would like to put limits on interactive jobs (started by salloc) so that users don't leave unused interactive jobs behind on the cluster by mistake. I can't offhand find any configurations that limit interactive jobs, such as enforcing a timelimit. Perhaps this could be done in job_submit.lua, but I couldn't find any job_desc parameters in the source code which would indicate if a job is interactive or not. Question: How do people limit interactive jobs, or identify orphaned jobs and kill them? Thanks a lot, Ole -- Ole Holm Nielsen PhD, Senior HPC Officer Department of Physics, Technical University of Denmark

4 4

Setting QoS with slurm 24.05.7
by Patrick Begou 25 Apr '25

25 Apr '25

Hi all, I'm trying to setup a QoS on a small 5 nodes cluster running slurm 24.05.7. My goal is to limit the resources on a (time x number of cores) strategy to avoid one large job requesting all the resources for too long time. I've read from https://slurm.schedmd.com/qos.html and some discussion but my setup is still not working. I think I need to set these informations: MaxCPUsPerJob=172800 MaxWallDurationPerJob=48:00:00 Flags=DenyOnLimit,OverPartQOS for: 12h max for 240 cores => (12*240*60=172800mn) no job can exceed 2 days do not accept jobs out of these limits. What I've done: 1) create the QoS: sudo sacctmgr add qos workflowlimit \ MaxWallDurationPerJob=48:00:00 \ MaxCPUsPerJob=172800 \ Flags=DenyOnLimit,OverPartQOS 2) Check sacctmgr show qos Name=workflowlimit format=Name%16,MaxTRES,MaxWall Name MaxTRES MaxWall ---------------- ------------- ----------- workflowlimit cpu=172800 2-00:00:00 3) Set the QoS for the account "most" which is the default account for the users: sudo sacctmgr modify account name=most set qos=workflowlimit 4) Check $ sacctmgr show assoc format=account,cluster,user,qos Account Cluster User QOS ---------- ---------- ---------- -------------------- root osorno normal root osorno root normal legi osorno normal most osorno workflowlimit most osorno begou workflowlimit 5) Modifiy slurm.conf with: AccountingStorageEnforce=limits,qos and propagate on the 5 nodes and the front end (done via Ansible) 6) Check clush -b -w osorno-fe,osorno,osorno-0-[0-4] 'grep AccountingStorageEnforce /etc/slurm/slurm.conf' --------------- osorno,osorno-0-[0-4],osorno-fe (7) --------------- AccountingStorageEnforce=limits,qos 7) restart slurmd on all the compute nodes and slurmctld + slurmdbd on the management node. But I can still request 400 cores for 24 hours: [begou@osorno ~]$ srun -n 400 -t 24:0:0 --pty bash bash-5.1$ squeue JOBID PARTITION NAME USER ST TIME START_TIME TIME_LIMIT CPUS NODELIST(REASON) 147 genoa bash begou R 0:03 2025-04-18T16:52:11 1-00:00:00 400 osorno-0-[0-4] So I must have missed something ? My partition (I've only one) in slurm.conf is: PartitionName=genoa State=UP Default=YES MaxTime=48:00:00 DefaultTime=24:00:00 Shared=YES OverSubscribe=NO Nodes=osorno-0-[0-4] Thanks Patrick

2 4

Job running slower when using Slurm
by Jeffrey Layton 24 Apr '25

24 Apr '25

Good morning, I'm running an NPB test, bt.C that is OpenMP and built using NV HPC SDK (version 25.1). I run it on a compute node by ssh-ing to the node. It runs in about 19.6 seconds. Then I run the code using a simple job: Command to submit job: sbatch --nodes=1 run-npb-omp The script run-npb-omp is the following: #!/bin/bash cd /home/.../NPB3.4-OMP/bin ./bt.C.x When I use Slurm, the job takes 482 seconds. Nothing really appears in the logs. It doesn't do any IO. No data is copied anywhere. I'm king of at a loss to figure out why. Any suggestions of where to look? Thanks! Jeff

4 9

Strange output of sshare
by frsc＠adm.ku.dk 23 Apr '25

23 Apr '25

Hi all, I'm trying to clean up and reconfigure fair share on a slurm 20.11.9 production cluster after some trial and error before I started looking into it. I don't know the full story and need to pick up here. Fair share is enabled with default settings and not customised. It looks a bit like it was enabled by accident and relevant options are undefined/at default. As a first step I would like to understand the current state. Executing sshare includes output like this (output shortened but complete for the two relevant accounts): Account User Partition RawShares NormShares RawUsage EffectvUsage FairShare -------- ---------- ------------ ---------- ----------- ----------- ------------- ---------- root 0.000000 1002501 1.000000 .root root 1 0.083333 0 0.000000 1.000000 .A1 1 0.083333 0 0.000000 ..A1 U1 P1 1 0.166667 0 0.000000 0.873684 ..A1 U2 P1 1 0.166667 0 0.000000 0.873684 ..A1 U3 P1 1 0.166667 0 0.000000 0.873684 ..A1 U3 P2 1 0.166667 0 0.000000 0.873684 ..A1 U4 P3 1 0.166667 0 0.000000 0.873684 ..A1 U4 P1 1 0.166667 0 1.000000 0.821053 <== What is going on here?? .A2 1 0.083333 0 0.000000 ..A2 U5 P2 1 0.142857 0 0.000000 1.000000 ..A2 U5 P1 1 0.142857 0 0.000000 1.000000 ..A2 U6 P4 1 0.142857 0 0.000000 1.000000 ..A2 U6 P1 1 0.142857 0 0.000000 1.000000 ..A2 U6 P2 1 0.142857 0 0.000000 1.000000 ..A2 U7 P1 1 0.142857 0 0.000000 1.000000 ..A2 U7 P2 1 0.142857 0 0.000000 1.000000 User U4 is not a member of any other account. I understand everything about this output except the line I marked. Both accounts A1 and A2 have zero usage, yet, for user U4 on partition P1 we have effective usage 1.0, screwing the fair share factors up for everyone in this account. As far as I can tell, both accounts should look identical with a fair share factor of 1 for every user. I'm grateful for any pointer for what to look for. Best regards, Frank

2 1

Slurm webhooks
by Davide DelVento 22 Apr '25

22 Apr '25

Happy Monday everybody, I've gotten a request to have Slurm notify users for the typical email things (job started, completed, failed, etc) with a REST API instead of email. This would allow notifications in MS Teams, Slack, or log stuff in some internal websites and things like that. As far as I can tell, Slurm does not support that, for example there was somebody who was looking for that on Galaxy and did not find a solution: https://help.galaxyproject.org/t/web-hook-post-to-external-url-when-job-beg… Is that indeed the case, as searching the web indicates? If Slurm does not support this, is there a workaround? For example, I'm thinking of installing a local SMTP server, or an alternative/dummy mailx program which instead of relaying emails as requested would post an encrypted web url thing using the information from the email. I am sure I could actually write such a software myself, but I don't have enough time to dedicate to the design, maintenance and debugging of such, so I am looking for something decent already in existence. A cursory web search did not find anything suitable, but perhaps I did not look in the appropriate places, because my gut feeling is that somebody must have already had such an itch to scratch! Any other ideas about alternative ways to accomplish this? Thanks

3 3

problem with slurmd dynamic mode with slurmctld in docker
by stef53864 22 Apr '25

22 Apr '25

hi everybody, i try to user dynamic mode with configless mode with slurm 24.11.3 and upgrade to 24.11.4 with slurmd and i found a problem. slurmctld is a container with docker, and my node is outside the container network . slurmctld register my ip with a function getpeeraddr on the slurmctld socket. but my ip connected to the socket come from the docker nat/bridge so slurmctld register my ip bridged ( not my real ip ) that is to say the docker gateway (172.20.0.1) *scontrol show node* *-------------------------* *NodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=172.20.0.1 NodeHostName=ltlsbubble1 Version=24.11.4* so the node go down after the "not pinging it" timeout i try to update the config *scontrol uupdate NodeName=ltlsbubble1* *NodeAddr=xx.xx.xx.xx* but a the first *scontrol reconfigure * it comes back to : *NodeAddr=172.20.0.1* in normal mode ------------------- *scontrol show nodeNodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=ltlsbubble1 NodeHostName=ltlsbubble1 Version=24.11.4* in normal mode NodeAddr is the same than NodeName , so it use DNS resolution for communication. to verify my hypothesis, i go to the c code of slurm, identify the register function and replace it with the same mechanism than normal node in src/slurmctld/node_mgr.c i replace : set_node_comm_name(node_ptr, *comm_name*, reg_msg->hostname); by set_node_comm_name(node_ptr, NULL, reg_msg->hostname); i rebuild slutmctld with this patch and try it with dynamic mode , it works like expected *scontrol show nodeNodeName=ltlsbubble1 Arch=x86_64 CoresPerSocket=4..NodeAddr=ltlsbubble1 NodeHostName=ltlsbubble1 Version=24.1* no ip in nodeAddr , but only the nodename, so it use DNS resolution . the node works fine and no goes down for timeout ping so my question : can we have an option to force DNS resolution instead ip discover in Dynamic mode ? ( i try the option cloud_dns, but it not seems the purpose of this option) best regard, Stephane

1 0

pam_slurm_adopt ambiguity in instructions and with ssd
by Robert Kudyba 21 Apr '25

21 Apr '25

In the instructions for pam_slurm_adopt <https://slurm.schedmd.com/pam_slurm_adopt.html#ssh_config>, there are instructions such as: > > Add the following line to the appropriate file in /etc/pam.d, such as > system-auth or sshd (you may use either the "required" or "sufficient" > PAM control flag): This module is configurable. Add these options to the end of the > pam_slurm_adopt line in the appropriate file in /etc/pam.d/ (e.g., sshd > or system-auth): Assuming an OS like CentOS does this mean it should be put in both? slurm.conf on the node has: UsePAM yes slurm.conf has PrologFlags=contain and ProctrackType=proctrack/cgroup I placed the call here only in /etc/pam.d/sshd making sure it is the last line in the account stack. #%PAM-1.0 auth required pam_sepermit.so auth substack system-auth auth include postlogin # Used with polkit to reauthorize users in remote sessions -auth optional pam_reauthorize.so prepare account required pam_nologin.so account include system-auth -account required pam_slurm_adopt.so so pam_sss.so is at the bottom of /etc/pam.d/sshd session optional pam_keyinit.so revoke session required pam_limits.so #-session optional pam_systemd.so session optional pam_oddjob_mkhomedir.so umask=0022 skel=/etc/skel session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_sss.so We're testing this on an idle node. I start an interactive srun. However trying to ssh to the node gets: Apr 18 11:13:41 node11 sshd[33355]: Authorized to dk2643, krb5 principal user(a)ouruni.EDU (ssh_gssapi_krb5_cmdok) Apr 18 11:13:41 node11 sshd[33355]: pam_sss(sshd:account): Access denied for user user: 6 (Permission denied) Apr 18 11:13:41 node11 sshd[33355]: fatal: Access denied for user user by PAM account configuration [preauth] Am I missing something?

3 5

Issue with Enforcing GPU Usage Limits in Slurm
by lyz＠simplehpc.com 16 Apr '25

16 Apr '25

Hi, I am currently encountering an issue with Slurm's GPU resource limitation. I have attempted to restrict the number of GPUs a user can utilize by executing the following command: sacctmgr modify user lyz set MaxTRES=gres/gpu=2 This command is intended to limit user 'lyz' to using a maximum of 2 GPUs. However, when the user submits a job using srun, specifying CUDA 0, 1, 2, and 3 in the job script, or os.environ["CUDA_VISIBLE_DEVICES"] = "0,1,2,3", the job still utilizes all 4 GPUs during execution. This indicates that the GPU usage limit is not being enforced as expected. How can I resolve this situation.

4 14

pam_slurm_adopt and multiple jobs on the same worker node
by Massimo Sgaravatto 14 Apr '25

14 Apr '25

Dear all With the pam_slurm_adopt module as far as I understand you can ssh to a worker node if there is at least a job running on the node by that user. If there are multiple jobs, if I am not wrong you will be "mapped" to the last job started on the node. And, if you are using cgroups, you will be "confined" to the resources assigned to this "last" job. Is it possible in some way to specify the job to be mapped, in case there are multiple jobs for that user on the same node ? Thanks, Massimo

2 2

sllurmrestd via unix socket
by Brian Andrus 10 Apr '25

10 Apr '25

All, Maybe someone has seen this. I have slurmrestd running listening on port 8081 as well as a unix socket at /run/slurmrestd/slurmrestd.sock I am able to query the port with curl and do a ping. Everything seems fine. Other commands work as well. "pings": [ { "hostname": "head01", "pinged": "UP", "responding": true, "latency": 1605, "mode": "primary", "primary": true }, { "hostname": "head02", "pinged": "UP", "responding": true, "latency": 2353, "mode": "backup", "primary": false } When I try doing so via socket, however, my two head nodes show 'DOWN' : "pings": [ { "hostname": "head01", "pinged": "DOWN", "latency": 11784, "mode": "primary" }, { "hostname": "head02", "pinged": "DOWN", "latency": 12668, "mode": "backup" } Other commands fail with: "error_number": 1007, "error": "Protocol authentication error", I'll admit, I don't usually use sockets, so I could easily be overlooking something there. Permissions on the socket look right. I am getting json back, so it is connecting. Note: slurmrestd is running under it's own user (not root and not slurmuser). Any ideas? Thanks in advance, Brian Andrus

1 0

Minimum cpu cores per node partition level configuration
by Jeherul Islam 10 Apr '25

10 Apr '25

Dear All, I need to configure the slurm so the user must take a certain minimum number of CPU cores for a particular partition(not system-wide). Otherwise, the job must not run. Any suggestions will be highly appreciated. With Thanks and Regards -- Jeherul Islam

4 4

weird sacct behavior?
by Pierre Abele 10 Apr '25

10 Apr '25

Hi everyone, I am currently stuck with an sacct issue and would appreciate any help/hints/ideas: My users cannot retrieve job data from their currently running jobs through sacct anymore. Running sacct -a as root also reproduces this issue: It does not show running jobs, but both sacct -j <JobID> and squeue -j <JobID> do. AFAICT, this is not intended behavior (?). Also including longer time windows witch sacct -S ... -E did not help. root@slurmmaster:~# sacct -a | grep 154415 # this returns nothing root@slurmmaster:~# sacct -j 154415 JobID JobName Partition Account AllocCPUS State ExitCode ------------ ---------- ---------- ---------- ---------- ---------- -------- 154415 allocation primevo 0 PENDING 0:0 154415.batch batch primevo 2 RUNNING 0:0 154415.exte+ extern primevo 2 RUNNING 0:0 root@slurmmaster:~# squeue -j 154415 JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 154415 standard genedrop username R 1:31 1 hpc020 Also, possibly related, we had a slurmdbd crash before this changed. We run Ubuntu Server 24.04 LTS with Slurm 24.05.4, using a MariaDB accounting database hosted on the same machine as the Slurm controller. Does anyone here have any ideas? Best, Pierre -- Pierre Abele, M.Sc. HPC Administrator Max-Planck-Institute for Evolutionary Anthropology Department of Primate Behavior and Evolution Deutscher Platz 6 04103 Leipzig Room: U2.80 E-Mail: pierre_abele(a)eva.mpg.de Phone: +49 (0) 341 3550 245

1 0

Re: slurmctld HA ; backup controller doesn't schedule and start any job
by Hiromasa Watanabe 10 Apr '25

10 Apr '25

Hi all, Fortunately I solved this problem by changing Slurm version from 22.05.9 to 23.11.10. With Slurm 23.11.10, after stopping the primary slurmctld and slurmdbd, when I submit a job with sbatch while backup slurmctld and slurmdbd are running, the job becomes scheduled and runs. I don't know why, but this is OK. Thanks, Hiro

1 0

errors while trying to setup slurmdbd.
by Steven Jones 09 Apr '25

09 Apr '25

root@vuwunicohpcdbp1 ~]# systemctl status slurmdbd × slurmdbd.service - Slurm DBD accounting daemon Loaded: loaded (/usr/lib/systemd/system/slurmdbd.service; enabled; preset: disabled) Active: failed (Result: exit-code) since Thu 2025-04-10 10:28:52 NZST; 2min 33s ago Duration: 85ms Process: 2413 ExecStart=/usr/sbin/slurmdbd -D -s $SLURMDBD_OPTIONS (code=exited, status=1/FAILURE) Main PID: 2413 (code=exited, status=1/FAILURE) CPU: 11ms Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: Started Slurm DBD accounting daemon. Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: accounting_storage/as_mysql: _check_mysql_concat_is_sane: MySQL server version > Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: accounting_storage/as_mysql: init: Accounting storage MYSQL plugin loaded Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz slurmdbd[2413]: slurmdbd: fatal: This host not configured to run SlurmDBD ((vuwunicohpcdbp1 or vuwunicohp> Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: slurmdbd.service: Main process exited, code=exited, status=1/FAILURE Apr 10 10:28:52 vuwunicohpcdbp1.ods.vuw.ac.nz systemd[1]: slurmdbd.service: Failed with result 'exit-code'. lines 1-14/14 (END) This is a current RHEL9.5 [root@vuwunicohpcdbp1 ~]# rpm -qi mariadb Name : mariadb Epoch : 3 Version : 10.5.27 Release : 1.el9_5 Architecture: x86_64 Install Date: Fri 04 Apr 2025 11:13:14 AM NZDT Group : Unspecified Size : 18784786 License : GPLv2 and LGPLv2 Signature : RSA/SHA256, Fri 06 Dec 2024 10:47:26 PM NZDT, Key ID 199e2f91fd431d51 Source RPM : mariadb-10.5.27-1.el9_5.src.rpm Build Date : Thu 05 Dec 2024 03:22:03 PM NZDT Build Host : x86-64-04.build.eng.rdu2.redhat.com Packager : Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla> Vendor : Red Hat, Inc. URL : http://mariadb.org Summary : A very fast and robust SQL database server Description : MariaDB is a community developed fork from MySQL - a multi-user, multi-threaded SQL database server. It is a client/server implementation consisting of a server daemon (mariadbd) and many different client programs and libraries. The base package contains the standard MariaDB/MySQL client programs and utilities. [root@vuwunicohpcdbp1 ~]# ========= # Example slurmdbd.conf file. # # See the slurmdbd.conf man page for more information. # # Archive info #ArchiveJobs=yes #ArchiveDir="/tmp" #ArchiveSteps=yes #ArchiveScript= #JobPurge=12 #StepPurge=1 # # Authentication info AuthType=auth/munge #AuthInfo=/var/run/munge/munge.socket.2 # # slurmDBD info DbdAddr=127.0.0.1 #DbdAddr=localhost DbdHost=vuwunicoslurmrp1.ods.vuw.ac.nz #DbdHost=localhost DbdPort=6819 SlurmUser=slurm #MessageTimeout=300 DebugLevel=verbose #DefaultQOS=normal,standby LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurmdbd/slurmdbd.pid #PluginDir=/usr/lib/slurm #PrivateData=accounts,users,usage,jobs #TrackWCKey=yes # # Database info StorageType=accounting_storage/mysql #StorageHost=localhost StorageHost=127.0.0.1 #StoragePort=1234 StoragePort=3306 #StoragePort=6819 #StoragePass=xxxxx StoragePass=xxxxxx #StoragePass=aPIkaEqxLrA StorageUser=slurm StorageLoc=slurm_acct_db #ssj # ##ssj fini ============ This ran in test just fine but the slurm version is slightly newer in this case, [root@vuwunicohpcdbp1 admjonesst1]# rpm -qa |grep slurm slurm-24.11.3-1.el9.x86_64 slurm-slurmdbd-24.11.3-1.el9.x86_64 [root@vuwunicohpcdbp1 admjonesst1]# rpm -qi slurm-slurmdbd-24.11.3-1.el9.x86_64 Name : slurm-slurmdbd Version : 24.11.3 Release : 1.el9 Architecture: x86_64 Install Date: Mon 07 Apr 2025 01:58:32 PM NZST Group : System Environment/Base Size : 2959288 License : GPLv2+ Signature : (none) Source RPM : slurm-24.11.3-1.el9.src.rpm Build Date : Mon 07 Apr 2025 12:54:21 PM NZST Build Host : vuwunicoslurmp1.ods.vuw.ac.nz URL : https://slurm.schedmd.com/ Summary : Slurm database daemon Description : Slurm database daemon. Used to accept and process database RPCs and upload database changes to slurmctld daemons on each cluster [root@vuwunicohpcdbp1 admjonesst1]# regards Steven

2 2

pam error, related to accounting?
by David Bremner 09 Apr '25

09 Apr '25

Recently I enabled accounting on my tiny (1 compute node, one head node) slurm cluster. slurmdbd.conf looks like AuthType=auth/munge DbdHost=vertex DbdPort=6819 SlurmUser=slurm StorageHost=localhost StorageType=accounting_storage/mysql StorageUser=slurm StoragePass=#elided# StoragePort=3306 StorageLoc=slurm_acct_db PurgeEventAfter=30days PurgeJobAfter=30days PurgeResvAfter=30days PurgeStepAfter=30days PurgeSuspendAfter=30days Some potentially relevant parts of slurmd.conf are: UsePAM=1 ProctrackType=proctrack/cgroup SelectTypeParameters=CR_Core_Memory AccountingStorageType=accounting_storage/slurmdbd ClusterName=simplex JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup Since I enabled accounting the output from every job (whether started by srun or sbatch) finishes with slurmstepd-simplex: error: pam_close_session: Cannot make/remove an entry for the specified session /etc/pamd.d/slurm has the following content auth required pam_localuser.so auth required pam_shells.so account required pam_unix.so account required pam_access.so session required pam_unix.so session optional pam_systemd.so Accounting seems to be working OK. Does anyone know what PAM related code paths could be triggered by enabling accounting? d

1 0

recommended freeIPMI version
by Heckes, Frank 09 Apr '25

09 Apr '25

Hi all, I’d like to update to SLURM version 24.11.4. I was searching for a recommendation for freeIPMI (power measurement), but couldn’t find one on the schedMD web-pages (sorry, if I overlooked it). The latest available freeIPMI is 1.6.15 (https://ftp.gnu.org/gnu/freeipmi/freeipmi-1.6.15.tar.gz). Does anyone knows whether this is the best choice? Many thanks in advance for any advice. Cheers, -Frank

3 4

slurmctld HA ; backup controller doesn't schedule and start any job
by hiromasa.watanabe＠gmail.com 09 Apr '25

09 Apr '25

slurmctld HA ; backup controller doesn't schedule and start any job Hi all, I am trying a slurmctld HA configuration on two servers, using slurm version 22.05.9 of AlmaLinux 9.4. The problem is, after stopping the primary slurmctld and slurmdbd, when I submit a job with sbatch while backup slurmctld and slurmdbd are running, the job will be pending with Reason=None, and it will not be scheduled and will not start running. $ squeue JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 43 cpu_multi job hpc PD 0:00 1 (None) Why won't my job start running? What should I change to get the job to start running? The slurmctld.log and configuration files are shown below. Backup's slurmctld.log： [2025-04-09T15:31:17.000] debug3: Heartbeat at 1744180276 [2025-04-09T15:31:18.000] debug3: Heartbeat at 1744180277 [2025-04-09T15:31:19.022] debug3: Heartbeat at 1744180279 [2025-04-09T15:31:19.605] debug2: Processing RPC: REQUEST_SUBMIT_BATCH_JOB from UID=1000 [2025-04-09T15:31:19.605] debug3: _set_hostname: Using auth hostname for alloc_node: compute1 [2025-04-09T15:31:19.605] debug3: JobDesc: user_id=1000 JobId=N/A partition=cpu_multi name=job [2025-04-09T15:31:19.605] debug3: cpus=2-4294967294 pn_min_cpus=1 core_spec=-1 [2025-04-09T15:31:19.605] debug3: Nodes=1-[1] Sock/Node=65534 Core/Sock=65534 Thread/Core=65534 [2025-04-09T15:31:19.605] debug3: pn_min_memory_job=18446744073709551615 pn_min_tmp_disk=-1 [2025-04-09T15:31:19.605] debug3: immediate=0 reservation=(null) [2025-04-09T15:31:19.605] debug3: features=(null) batch_features=(null) cluster_features=(null) prefer=(null) [2025-04-09T15:31:19.605] debug3: req_nodes=(null) exc_nodes=(null) [2025-04-09T15:31:19.605] debug3: time_limit=-1--1 priority=-1 contiguous=0 shared=-1 [2025-04-09T15:31:19.605] debug3: kill_on_node_fail=-1 script=#! /bin/bash #SBATCH -p cpu_multi #SBATC... [2025-04-09T15:31:19.605] debug3: argv="./twocore.sh" [2025-04-09T15:31:19.605] debug3: environment=SHELL=/bin/bash,PYENV_SHELL=bash,HISTCONTROL=ignoredups,... [2025-04-09T15:31:19.605] debug3: stdin=/dev/null stdout=/misc/home/hpc/slurmtest/twocore_%J.out stderr=(null) [2025-04-09T15:31:19.605] debug3: work_dir=/misc/home/hpc/slurmtest alloc_node:sid=compute1:281600 [2025-04-09T15:31:19.605] debug3: power_flags= [2025-04-09T15:31:19.605] debug3: resp_host=(null) alloc_resp_port=0 other_port=0 [2025-04-09T15:31:19.605] debug3: dependency=(null) account=(null) qos=(null) comment=(null) [2025-04-09T15:31:19.605] debug3: mail_type=0 mail_user=(null) nice=0 num_tasks=2 open_mode=0 overcommit=-1 acctg_freq=(null) [2025-04-09T15:31:19.605] debug3: network=(null) begin=Unknown cpus_per_task=1 requeue=-1 licenses=(null) [2025-04-09T15:31:19.605] debug3: end_time= signal=0@0 wait_all_nodes=-1 cpu_freq= [2025-04-09T15:31:19.605] debug3: ntasks_per_node=-1 ntasks_per_socket=-1 ntasks_per_core=-1 ntasks_per_tres=-1 [2025-04-09T15:31:19.605] debug3: mem_bind=0:(null) plane_size:65534 [2025-04-09T15:31:19.605] debug3: array_inx=(null) [2025-04-09T15:31:19.605] debug3: burst_buffer=(null) [2025-04-09T15:31:19.605] debug3: mcs_label=(null) [2025-04-09T15:31:19.605] debug3: deadline=Unknown [2025-04-09T15:31:19.605] debug3: bitflags=0x1a00c000 delay_boot=4294967294 [2025-04-09T15:31:19.605] debug3: assoc_mgr_fill_in_user: found correct user: hpc(1000) [2025-04-09T15:31:19.605] debug5: assoc_mgr_fill_in_assoc: looking for assoc of user=hpc(1000), acct=hpc, cluster=cluster, partition=cpu_multi [2025-04-09T15:31:19.605] debug3: assoc_mgr_fill_in_assoc: found correct association of user=hpc(1000), acct=hpc, cluster=cluster, partition=cpu_multi to assoc=16 acct=hpc [2025-04-09T15:31:19.605] debug3: found correct qos [2025-04-09T15:31:19.607] debug2: priority/multifactor: priority_p_set: initial priority for job 44 is 33 [2025-04-09T15:31:19.607] debug2: found 1 usable nodes from config containing compute1 [2025-04-09T15:31:19.607] debug2: found 1 usable nodes from config containing compute2 [2025-04-09T15:31:19.607] debug3: _pick_best_nodes: JobId=44 idle_nodes 2 share_nodes 2 [2025-04-09T15:31:19.607] debug2: select/cons_tres: select_p_job_test: evaluating JobId=44 [2025-04-09T15:31:19.607] debug2: sched: JobId=44 allocated resources: NodeList=(null) [2025-04-09T15:31:19.607] _slurm_rpc_submit_batch_job: JobId=44 InitPrio=33 usec=2490 [2025-04-09T15:31:19.608] debug3: create_mmap_buf: loaded file `/var/spool/slurm/ctld/job_state` as buf_t [2025-04-09T15:31:19.609] debug3: Writing job id 45 to header record of job_state file [2025-04-09T15:31:21.000] debug3: Heartbeat at 1744180280 [2025-04-09T15:31:21.257] debug2: _slurm_connect: failed to connect to 192.168.56.11:6817: Connection refused [2025-04-09T15:31:21.257] debug2: Error connecting slurm stream socket at 192.168.56.11:6817: Connection refused [2025-04-09T15:31:22.000] debug3: Heartbeat at 1744180282 [2025-04-09T15:31:24.000] debug3: Heartbeat at 1744180283 [2025-04-09T15:31:25.004] debug3: Heartbeat at 1744180285 [2025-04-09T15:31:27.001] debug3: Heartbeat at 1744180287 [2025-04-09T15:31:29.000] debug3: Heartbeat at 1744180288 [2025-04-09T15:31:30.000] debug3: Heartbeat at 1744180289 [2025-04-09T15:31:31.006] debug3: Heartbeat at 1744180291 [2025-04-09T15:31:32.822] debug2: _slurm_connect: failed to connect to 192.168.56.11:6817: Connection refused [2025-04-09T15:31:32.822] debug2: Error connecting slurm stream socket at 192.168.56.11:6817: Connection refused [2025-04-09T15:31:33.007] debug3: Heartbeat at 1744180293 [2025-04-09T15:31:35.000] debug3: Heartbeat at 1744180294 [2025-04-09T15:31:36.002] debug3: Heartbeat at 1744180296 [2025-04-09T15:31:36.395] debug2: select/cons_tres: select_p_job_test: evaluating JobId=43 [2025-04-09T15:31:36.395] debug2: select/cons_tres: select_p_job_test: evaluating JobId=44 [2025-04-09T15:31:38.000] debug3: Heartbeat at 1744180297 [2025-04-09T15:31:38.497] debug2: Performing purge of old job records [2025-04-09T15:31:39.000] debug3: Heartbeat at 1744180298 [2025-04-09T15:31:40.000] debug3: Heartbeat at 1744180300 [2025-04-09T15:31:40.655] debug2: Testing job time limits and checkpoints [2025-04-09T15:31:42.000] debug3: Heartbeat at 1744180301 [2025-04-09T15:31:43.000] debug3: Heartbeat at 1744180302 slurm.conf: ClusterName=cluster SlurmctldHost=gateway1 #Primary(192.168.56.11) SlurmctldHost=gateway2 #Backup(192.168.56.12) MpiDefault=pmix ProctrackType=proctrack/cgroup PrologFlags=Contain ReturnToService=0 SlurmctldPidFile=/var/run/slurm/slurmctld.pid SlurmctldPort=6817 SlurmdPidFile=/var/run/slurm/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurm/d SlurmUser=slurm StateSaveLocation=/var/spool/slurm/ctld SwitchType=switch/none TaskEpilog=/etc/slurm/taskepilog.sh TaskPlugin=task/cgroup,task/affinity TaskProlog=/etc/slurm/taskprolog.sh InactiveLimit=0 KillWait=30 MinJobAge=300 SlurmctldTimeout=10 SlurmdTimeout=300 Waittime=0 DefMemPerCPU=32 SchedulerType=sched/builtin SelectType=select/cons_tres SelectTypeParameters=CR_Core_Memory PriorityType=priority/multifactor PriorityWeightPartition=1000 AccountingStorageHost=gateway1 AccountingStorageBackupHost=gateway2 AccountingStorageType=accounting_storage/slurmdbd AccountingStoreFlags=job_comment JobCompType=jobcomp/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup SlurmctldDebug=debug5 SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=info SlurmdLogFile=/var/log/slurm/slurmd.log NodeName=compute1 CPUs=4 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=1 RealMemory=3900 Weight=1 NodeName=compute2 CPUs=4 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=1 RealMemory=3900 Weight=1 PartitionName=gpu_single Nodes=ALL PriorityJobFactor=30 MaxTime=INFINITE State=UP Default=YES PartitionName=cpu_single Nodes=ALL PriorityJobFactor=10 MaxTime=INFINITE State=UP PartitionName=cpu_multi Nodes=ALL MaxTime=INFINITE State=UP slurmdbd.conf: AuthType=auth/munge DebugLevel=4 DbdHost=gateway1 DbdBackupHost=gateway2 LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurm/slurmdbd.pid PurgeEventAfter=1month PurgeJobAfter=1month PurgeResvAfter=1month PurgeStepAfter=1month PurgeSuspendAfter=1month PurgeTXNAfter=1month PurgeUsageAfter=1month SlurmUser=slurm StorageType=accounting_storage/mysql StorageHost=gateway1 StoragePass=mypassword StorageUser=slurm Best regards, Hiro

1 0

Slurm version 24.11.4 is now available
by Marshall Garey 08 Apr '25

08 Apr '25

We are pleased to announce the availability of Slurm version 24.11.4. This release fixes a variety of major to minor severity bugs. Some edge cases that caused jobs to pend forever are fixed. Notable stability issues that are fixed include: * slurmctld crashing upon receiving a certain heterogeneous job submission. * slurmd crashing after a communications failure with a slurmstepd. * A variety of race conditions related to receiving and processing connections, including one that resulted in the slurmd ignoring new RPC connections. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > -- slurmctld,slurmrestd - Avoid possible race condition that could have caused > process to crash when listener socket was closed while accepting a new > connection. > -- slurmrestd - Avoid race condition that could have resulted in address > logged for a UNIX socket to be incorrect. > -- slurmrestd - Fix parameters in OpenAPI specification for the following > endpoints to have "job_id" field: > GET /slurm/v0.0.40/jobs/state/ > GET /slurm/v0.0.41/jobs/state/ > GET /slurm/v0.0.42/jobs/state/ > GET /slurm/v0.0.43/jobs/state/ > -- slurmd - Fix tracking of thread counts that could cause incoming > connections to be ignored after burst of simultaneous incoming connections > that trigger delayed response logic. > -- Stepmgr - Avoid unnecessary SRUN_TIMEOUT forwarding to stepmgr. > -- Fix jobs being scheduled on higher weighted powered down nodes. > -- Fix how backfill scheduler filters nodes from the available nodes based on > exclusive user and mcs_label requirements. > -- acct_gather_energy/{gpu,ipmi} - Fix potential energy consumption adjustment > calculation underflow. > -- acct_gather_energy/ipmi - Fix regression introduced in 24.05.5 (which > introduced the new way of preserving energy measurements through slurmd > restarts) when EnergyIPMICalcAdjustment=yes. > -- Prevent slurmctld deadlock in the assoc mgr. > -- Fix memory leak when RestrictedCoresPerGPU is enabled. > -- Fix preemptor jobs not entering execution due to wrong calculation of > accounting policy limits. > -- Fix certain job requests that were incorrectly denied with node > configuration unavailable error. > -- slurmd - Avoid crash due when slurmd has a communications failure with > slurmstepd. > -- Fix memory leak when parsing yaml input. > -- Prevent slurmctld from showing error message about PreemptMode=GANG being a > cluster-wide option for `scontrol update part` calls that don't attempt to > modify partition PreemptMode. > -- Fix setting GANG preemption on partition when updating PreemptMode with > scontrol. > -- Fix CoreSpec and MemSpec limits not being removed from previously > configured slurmd. > -- Avoid race condition that could lead to a deadlock when slurmd, slurmstepd, > slurmctld, slurmrestd or sackd have a fatal event. > -- Fix jobs using --ntasks-per-node and --mem keep pending forever when the > requested mem divided by the number of cpus will surpass the configured > MaxMemPerCPU. > -- slurmd - Fix address logged upon new incoming RPC connection from "INVALID" > to IP address. > -- Fix memory leak when retrieving reservations. This affects scontrol, sinfo, > sview, and the following slurmrestd endpoints: > 'GET /slurm/{any_data_parser}/reservation/{reservation_name}' > 'GET /slurm/{any_data_parser}/reservations' > -- Log warning instead of debuflags=conmgr gated log when deferring new > incoming connections when number of active connections exceed > conmgr_max_connections. > -- Avoid race condition that could result in worker thread pool not activating > all threads at once after a reconfigure resulting in lower utilization of > available CPU threads until enough internal activity wakes up all threads > in the worker pool. > -- Avoid theoretical race condition that could result in new incoming RPC > socket connections being ignored after reconfigure. > -- slurmd - Avoid race condition that could result in a state where new > incoming RPC connections will always be ignored. > -- Add ReconfigFlags=KeepNodeStateFuture to restore saved FUTURE node state on > restart and reconfig instead of reverting to FUTURE state. This will be > made the default in 25.05. > -- Fix case where hetjob submit would cause slurmctld to crash. > -- Fix jobs using --cpus-per-gpu and --mem keep pending forever when the > requested mem divided by the number of cpus will surpass the configured > MaxMemPerCPU. > -- Enforce that jobs using --mem and several --*-per-* options do not violate > the MaxMemPerCPU in place. > -- slurmctld - Fix use-cases of jobs incorrectly pending held when --prefer > features are not initially satisfied. > -- slurmctld - Fix jobs incorrectly held when --prefer not satisfied in some > use-cases. > -- Ensure RestrictedCoresPerGPU and CoreSpecCount don't overlap.

1 0

slurm send email status with no details
by Oren 07 Apr '25

07 Apr '25

Hi, We set up a slurm system with email notification, this is the slurm.conf `MailProg=/usr/sbin/sendmail` But the email that I get has not status, just an empty message: [image: image.png] no subject, no info, what are we missing? Thanks~

2 1

Run a command in Slurm with all streams and signals connected to the submitting command
by Michael Milton 06 Apr '25

06 Apr '25

I'm helping with a workflow manager that needs to submit Slurm jobs. For logging and management reasons, the job (e.g. srun python) needs to be run as though it were a regular subprocess (python): - stdin, stdout and stderr for the command should be connected to process inside the job - signals sent to the command should be sent to the job process - We don't want to use the existing job allocation, if this is run from a Slurm job - The command should only terminate when the job is finished, to avoid us needing to poll Slurm We've tried: - sbatch --wait, but then SIGTERM'ing the process doesn't kill the job - salloc, but that requires a TTY process to control it (?) - salloc srun seems to mess with the terminal when it's killed, likely because of being "designed to be executed in the foreground" - Plain srun re-uses the existing Slurm allocation, and specifying resources like --mem will just request then from the current job rather than submitting a new one What is the best solution here?

2 2

Re: Run a command in Slurm with all streams and signals connected to the submitting command
by Michael Milton 04 Apr '25

04 Apr '25

Thanks Davide, It's true that srun will create an allocation if you aren't inside a job, but if you are inside a job and you request more resources than it has, then srun will just fail. This is the key issue that I want to avoid. On Sat, Apr 5, 2025 at 11:48 AM Davide DelVento <davide.quantum(a)gmail.com> wrote: > The plain srun is probably the best bet, and if you really need the thing > to be started from another slurm job (rather than the login node) you will > need to exploit the fact that > > > If necessary, srun will first create a resource allocation in which to > run the parallel job. > > AFAIK, there is no option to for the "create a resource allocation" even > if it's not necessary. But you may try to request something that is "above > and beyond" what the current allocation provides, and that might solve your > problem. > Looking at the srun man page, I could speculate that --clusters > or --cluster-constraint might help in that regard (but I am not sure). > > Have a nice weekend > > > On Fri, Apr 4, 2025 at 6:27 AM Michael Milton via slurm-users < > slurm-users(a)lists.schedmd.com> wrote: > >> I'm helping with a workflow manager that needs to submit Slurm jobs. For >> logging and management reasons, the job (e.g. srun python) needs to be run >> as though it were a regular subprocess (python): >> >> - stdin, stdout and stderr for the command should be connected to >> process inside the job >> - signals sent to the command should be sent to the job process >> - We don't want to use the existing job allocation, if this is run >> from a Slurm job >> - The command should only terminate when the job is finished, to >> avoid us needing to poll Slurm >> >> We've tried: >> >> - sbatch --wait, but then SIGTERM'ing the process doesn't kill the job >> - salloc, but that requires a TTY process to control it (?) >> - salloc srun seems to mess with the terminal when it's killed, >> likely because of being "designed to be executed in the foreground" >> - Plain srun re-uses the existing Slurm allocation, and specifying >> resources like --mem will just request then from the current job rather >> than submitting a new one >> >> What is the best solution here? >> >> -- >> slurm-users mailing list -- slurm-users(a)lists.schedmd.com >> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com >> >

1 0

Best Way to See GPUs in Use?
by Jason Simms 02 Apr '25

02 Apr '25

Hello all, Apologies for the basic question, but is there a straightforward, best-accepted method for using Slurm to report on which GPUs are currently in use? I've done some searching and people recommend all sorts of methods, including parsing the output of nvidia-smi (seems inefficient, especially across multiple GPU nodes), as well as using other tools such as Grafana, XDMoD, etc. We do track GPUs as a resource, so I'd expect I could get at the info with sreport or something like that, but before trying to craft my own from scratch, I'm hoping someone has something working already. Ultimately I'd like to see either which cards are available by node, or the reverse (which are in use by node). I know recent versions of Slurm supposedly added tighter integration in some way with NVIDIA cards, but I can't seem to find definitive docs on what, exactly, changed or what is now possible as a result. Warmest regards, Jason -- *Jason L. Simms, Ph.D., M.P.H.* Research Computing Manager Swarthmore College Information Technology Services (610) 328-8102

3 2

slum job sumisison using different UID/GID
by navin srivastava 02 Apr '25

02 Apr '25

Hi, Can munge depend upon the UID/GID for the job submission? There is a scenario where the cluster is running with the NIS authentication mechanism. There is a login Node created which is part of LDAP and we installed the slurm to interact with slurm master. I am able to run jobs using root but for users it is not working as the UID/GID differ. Is there a way we can overcome this issue? and be able to run jobs. Rehards Navin

1 0

slurm releases
by Patrick Begou 01 Apr '25

01 Apr '25

Hi slurm team, I would ask some clarifications with slurm releases. Why two versions of slurm are available ? I speak of 24.05.7 versus 24.11.3 on https://www.schedmd.com/slurm-support/release-announcements and announces made on this list ? I'm managing small clusters in a french public research lab and I've successfully updated (lets says re-installed as it was very old) an old one with slurm-24.05.3 some month ago. Now I'm trying to deploy a second cluster with the same approach and I've selected 24.11.3-1 (but why not using 24.05.7 ?). Moreover I have some difficulties for deploying 24.11.3 : I've built the rpm with: rpmbuild \ --define '_prefix /usr' \ --with pmix --with ucx --with mysql --with hwloc \ -ta slurm-24.11.3.tar.bz2 but some packages wont install: $ dnf list --showduplicates slurm-slurmd Last metadata expiration check: 0:33:15 ago on Tue Apr 1 18:03:07 2025. Available Packages slurm-slurmd.x86_64 24.11.3-1.el9 bb-local $ sudo dnf install slurm-slurmd Last metadata expiration check: 0:33:03 ago on Tue Apr 1 18:03:25 2025. Error: Problem: conflicting requests - nothing provides is needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local - nothing provides installed needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local - nothing provides not needed by slurm-slurmd-24.11.3-1.el9.x86_64 from bb-local (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) I think I will try to build 24.05.7 or 24.05.3 as a next try but I'm interested in any advices. Thank you Patrick

2 1

cpus and gpus partitions and how to optimize the resource usage
by Massimo Sgaravatto 31 Mar '25

31 Mar '25

Dear all We have just installed a small SLURM cluster composed of 12 nodes: - 6 CPU only nodes: 2 Sockets=2, 96 CoresPerSocket 2, ThreadsPerCore=2, 1.5 TB of RAM - 6 nodes with also GPUS: same conf of the CPU-only node + 4 H100 per node We started with a setup with 2 partitions: - a 'onlycpus' partition which sees all the cpu-only nodes - a 'gpus' partition which sees the nodes with gpus and asked users to use the 'gpus' partition only for jobs that need gpus (for the time being we are not technically enforced that). The problem is that a job requiring a GPU usually needs only a few cores and only a few GB of RAM, which means wasting a lot of CPU cores. And having all nodes in the same partition would mean that there is the risk that a job requiring a GPU can't start if all CPU cores and/or all memory is used by CPU only jobs I went through the mailing list archive and I think that "splitting" a GPU node into two logical nodes (one to be used in the 'gpus' partition and one to be used in the 'onlycpus' partition) as discussed in [*] would help. Since that proposed solution is considered by his author a "bit of a kludge" and since I read that splitting a node into multiple logical nodes is in a general a bad idea, I'd like to understand if you could suggest other/best options. I also found this [**] thread, but I don't like too much that approach (i.e. relying on MaxCPUsPerNode) because it would mean having 3 partition (if I have got it right): two partitions for cpu only jobs and 1 partition for gpu jobs Many thanks, Massimo [*] https://groups.google.com/g/slurm-users/c/IUd7jLKME3M [**] https://groups.google.com/g/slurm-users/c/o7AiYAQ1YJ0

4 5

Preemption question
by Kamil Wilczek 31 Mar '25

31 Mar '25

Dear All, I would like to be able to preempt (SUSPEND) a single QoS of a user that blocks the queue for several days. Currently I have about 100 users on the cluster and it seems that setting the "Preempt" option to each QoS (we have personal QoSes) is not optimal. https://slurm.schedmd.com/sacctmgr.html#OPT_Preempt Is there a way to to set an option to this single problematic QoS, saying that the QoS can be preempted by any other QoS? It would be much more administrator-friendly solution ;) Kind regards -- Kamil Wilczek [https://keys.openpgp.org/] [D415917E84B8DA5A60E853B6E676ED061316B69B]

3 4

Slurm 24.05 and OpenMPI
by Matthias Leopold 28 Mar '25

28 Mar '25

Hi, I built a small Slurm 21.08 cluster with NVIDIA GPU hardware and NVIDIA deepops framework a couple of years ago. It is based on Ubuntu 20.04 and makes use of the NVIDIA pyxis/enroot container solution. For operational validation I used the nccl-tests application in a container. nccl-tests is compiled with MPI support (OpenMPI 4.1.6 or 4.1.7) and I used it also for validation of MPI jobs. Slurm jobs use "pmix" and tasks are launched via srun (not mpirun). Some of the GPUs can talk to each other via Infiniband, but MPI is rarely used at our site and I'm fully aware that my MPI knowledge is very limited. Still it worked with Slurm 21.08. Now I built a Slurm 24.05 cluster based on Ubuntu 24.04 and started to move hardware there. When I run my nccl-tests container (also with newer software) I see error messages like this: [node1:21437] OPAL ERROR: Unreachable in file ext3x_client.c at line 111 -------------------------------------------------------------------------- The application appears to have been direct launched using "srun", but OMPI was not built with SLURM's PMI support and therefore cannot execute. There are several options for building PMI support under SLURM, depending upon the SLURM version you are using: version 16.05 or later: you can use SLURM's PMIx support. This requires that you configure and build SLURM --with-pmix. Versions earlier than 16.05: you must use either SLURM's PMI-1 or PMI-2 support. SLURM builds PMI-1 by default, or you can manually install PMI-2. You must then build Open MPI using --with-pmi pointing to the SLURM PMI library location. Please configure as appropriate and try again. -------------------------------------------------------------------------- *** An error occurred in MPI_Init *** on a NULL communicator *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort, *** and potentially your MPI job) [node1:21437] Local abort before MPI_INIT completed completed successfully, but am not able to aggregate error messages, and not able to guarantee that all other processes were killed! One simple question: Is this related to https://github.com/open-mpi/ompi/issues/12471? If so: is there some workaround? I'm very grateful for any comments. I know that a lot of detail information is missing, but maybe someone can still already give me a hint where to look. Thanks a lot Matthias

3 10

Doubt with SelectTypeParameters in slurm.conf
by Gestió Servidors 28 Mar '25

28 Mar '25

Hello, I'm running some tests in a very small testing environment (before applying in the real scenario). My environment is only a computer with a old Intel i4 with this "lscpu" configuration: Architecture: x86_64 CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 26 Model name: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz "slurmd -C" returns: "CPUs=8 Boards=1 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2". My slurm.conf is configured with: SelectType=select/cons_tres SelectTypeParameters=CR_Core AccountingStorageTRES=cpu,mem,node,billing,fs/disk,vmem,pages After running a simple "helloworld" test, I have noticed that if SelectTypeParameters=CR_Core, system always reserves me an even number of CPUs (during "pending" time, I can see the real number I have requested, but when job starts "running", that number is increased to the next even number). Howerver, if I reconfigure slurm with SelectTypeParameters=CR_CPU, system reserves me the correct number of CPUs (during "pending" time and, also, during "running" time). I suppose that my system must be configured with CR_CPU, according https://slurm.schedmd.com/cons_tres.html, but could someone confirm that? Thanks.

2 1

bit_cache_init failure on the second time backup controller tries to take control
by Safdar Iqbal 27 Mar '25

27 Mar '25

Hi, We're running into an issue where slurmctld core-dumps with the following error. This happens on the backup controller, if it needs to take over from the primary, _for a second time_. slurmctld: fatal: bit_cache_init: cannot change size once set Has anyone seen this error before? Also if there are any existing discussions and/or tickets related to this, please let me know. Our slurm version is 24.11.1. ________________ Steps to reproduce: 1. On a healthy cluster, we make the primary controller unavailable. Since we're running our cluster on cloud VMs, we cause this by stopping the primary controller VM. 2. From the logs we can see the backup controller take over, and log the message "Running as primary controller" 3. We then start the primary again, making sure the IP addresses and hostnames stay consistent. Once slurmctld on the primary has started and taken back control, we can see the log "Running as primary controller" on that VM. 4. We then stop the primary controller VM again, causing the backup to try taking the control a second time. This time however the slurmctld on the backup coredumps, with following log entries from journalctl -u slurmctld: slurmctld: fatal: bit_cache_init: cannot change size once set slurmctld.service: Main process exited, code=dumped, status=6/ABRT slurmctld.service: Failed with result 'core-dump'. Thanks! - Safdar

1 0

How limit CPUs per node in a partition
by Gestió Servidors 27 Mar '25

27 Mar '25

Hello, I have a testing partition with only a node. That server has 12 CPUs (it's a very old server) (2 sockets, 6 cores per socket, 1 thread per core). That partition, called "test.q" only has that node, so by default, partition test.q has 12 CPUs (all from testing node). However, now I would like to decrease that CPU number from 12 to 4, for example. "slurmd -C" returns "CPUs=12 Boards=1 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=1" as I have said to you before and if in slurm.conf I configure partition in this way "PartitionName=test.q Nodes=test-node MaxTime=10:00 State=UP AllocNodes=clus-login MaxCPUsPerNode=4", partition continues accepting jobs with 12 CPUs. Is it any wrong in my configuration? How could I get my purpose? Thanks. -- [cid:image001.jpg@01DB9F0E.FDD9A7A0]<http://www.uab.cat/> Daniel Ruiz Molina Tècnic Mitjà Informàtic Arquitectura de Computadors i Sistemes Operatius Escola d'Enginyeria Edifici Q - Despatx QC/3052 - Carrer de les Sitges Campus de la UAB · 08193 Bellaterra (Cerdanyola del Vallès) · Barcelona · Spain +34 93 581 35 44 www.uab.cat<http://www.uab.cat/> Daniel Ruiz at UAB<https://tinyurl.com/yd95zb8j> [cid:image002.jpg@01DB9F0E.FDD9A7A0]<www.linkedin.com/in/daniel-ruiz-molina-50a83b27> Aquest missatge s'adreça exclusivament a la persona destinatària i pot contenir informació privada o confidencial. Si l'heu rebut per error, comuniqueu-nos-ho i destruïu-lo, i tingueu present que no teniu autorització per fer-ne cap ús. Abans d'imprimir aquest missatge penseu en el medi ambient.

1 0

Re: Using more cores/CPUs that requested with
by Shunran Zhang 26 Mar '25

26 Mar '25

Ugh I think I did not catch up with the docs. I started with a system that defaults to cgroup v1 but the Slurm doc for that plugin is NOT available at that time. Thus I converted everything to cgroup v2. It appears that they are both supported and that documentation issue is more on the dev side than admin side. Thanks for pointing that out. I misinterpreted the "coming soon" part of cgroup v1 plugin and the "legacy" naming for "do not use". It should be fine. 2025年3月27日(木) 0:48 Williams, Jenny Avis <jenny_williams(a)unc.edu>: > “ … As cgroup is likely not supposed to be used in newer deployments of > Slurm.” > > > > I am curious about this statement. Would someone expand on this, to either > support or counter it? > > > > Jenny Williams > > UNC Chapel Hill > > > > > > *From:* Shunran Zhang via slurm-users <slurm-users(a)lists.schedmd.com> > *Sent:* Wednesday, March 26, 2025 10:52 AM > *To:* Gestió Servidors <sysadmin.caos(a)uab.cat> > *Cc:* Slurm User Community List <slurm-users(a)lists.schedmd.com> > *Subject:* [slurm-users] Re: Using more cores/CPUs that requested with > > > > If you are letting systemd taking most things over, you got systemd-cgtop > that work better than top for your case. There is also systemd-cgls for > non-interactive listing. > > > > Also mind to check if you are using cgroup2? A mount to check your cgroup > would suffice. As cgroup is likely not supposed to be used in newer > deployments of Slurm. > > > > > > 2025年3月26日(水) 17:14 Gestió Servidors via slurm-users < > slurm-users(a)lists.schedmd.com>: > > Hello, > > > > Thanks for your answers. I will try now!! One more question: is there any > way to check if Cgroups restrictions is working fine during a “running” job > or during SLURM scheduling process? > > > > Thanks again! > > > > > -- > slurm-users mailing list -- slurm-users(a)lists.schedmd.com > To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com > >

1 0

Re: Using more cores/CPUs that requested with
by Gestió Servidors 26 Mar '25

26 Mar '25

Hello, Thanks for your answers. I will try now!! One more question: is there any way to check if Cgroups restrictions is working fine during a "running" job or during SLURM scheduling process? Thanks again!

4 3

Using more cores/CPUs that requested with sbatch
by Gestió Servidors 25 Mar '25

25 Mar '25

Hello, I would like to know if there is any mechanism to avoid a user to do "cheating" when he submits a job. For example, a user submits a OpenMP job requesting 1 node (-N 1) and 2 tasks (-n 2). However, inside his script (or compiled in his binany), user uses more than 2 ntasks, for example, all free cores. For SLURM, job is only using 2, but really, node is 100% assigned to that job. SLURM can control that "abuse" in some way? Cgroups? Thanks.

3 2

Re: Using more cores/CPUs that requested with sbatch
by Megan 25 Mar '25

25 Mar '25

Slurm can restrict jobs to their allocated resources using cgroups. To use cgroups you will have to configure the TaskPlugin cgroup option and specify how the cgroups should behave in cgroup.conf. slurm.conf TaskPlugin=task/cgroup Slurm Workload Manager - slurm.conf <https://slurm.schedmd.com/slurm.conf.html#OPT_task/cgroup> cgroup.conf ConstrainCores=yes Slurm Workload Manager - cgroup.conf <https://slurm.schedmd.com/cgroup.conf.html#OPT_ConstrainCores> Regards, --Megan

1 0

slurmrestd equivalent to "srun -n 10 echo HELLO"
by Dan Healy 24 Mar '25

24 Mar '25

Hi Slurm Community, I'm starting to experiment with slurmrestd for a new app we're writing. I'm having trouble understanding one aspect of submitting jobs. When I run something like `srun -n 10 echo HELLO', I get HELLO returned to my console/stdout 10x. When I submit this command as a script to the /jobs/submit route, I get success/200, but *I cannot determine how to get the console output of HELLO 10x in any form*. It's not in my stdout log for that job even though I can verify that the job ran successfully. Any suggestions? -- Thanks, Daniel Healy

3 2

Priority/Top seems to not be working
by Dan Healy 24 Mar '25

24 Mar '25

Hi Slurm Users, I have a newer install (23.11.3) and the priority of most all jobs is 1 and other small numbers. In previous versions, I would see numbers like 2^32. I have the multifactor plugin configured and confirmed it's in-use when I show the config. When I run `scontrol top` for a given job, the priority number doesn't change from 1. I have lots of jobs running at the moment and many queued as well. I've been using `scontrol top` for years and have seen the priority successfully change. I'm repeating this now with the newer version of Slurm and now seeing it work the same. Are you seeing this too? -- Thanks, Daniel Healy

1 0

missing jobs from queue
by Felix 14 Mar '25

14 Mar '25

Hello at site RO-14-ITIM, we have a very strange problem. A ticket was raised with the following: "Hi, The new ticket (Pilots disappearing from local batch system at ITIM) has been created by "*Timo Wilken*". Group: NGIs › NGI_RO Owner: - State: in progress Information: Hi, Pilots seem to be lost by the local batch system at ITIM. >50% of pilots fail: https://apfmon.lancs.ac.uk/CERN_central_A:RO-14-ITIM-arcn-node?state=fault Example log: https://aipanda156.cern.ch/condor_logs_2/25-03-12_13/grid.15478691.1.log Error message: "ARC job failed: LRMS error: (-1) Job missing from SLURM" Cheers, Timo" The problem is I can not find any of the jobs that are failing on the site: for example: the last job: https://aipanda023.cern.ch/condor_logs_2/25-03-14_09/grid.19602200.0.log with stdlog: 000 (19602200.000.000) 2025-03-14 09:28:03 Job submitted from host: <137.138.31.125:38090?addrs=137.138.31.125-38090+[2001-1458-d00-19--75]-38090&alias=aipanda023.cern.ch> ... 027 (19602200.000.000) 2025-03-14 09:28:13 Job submitted to grid resource GridResource: arc arcn-node.itim-cj.ro:443 GridJobId: arc arcn-node.itim-cj.ro:443 PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n ... 001 (19602200.000.000) 2025-03-14 09:40:51 Job executing on host: arc arcn-node.itim-cj.ro:443 ... 012 (19602200.000.000) 2025-03-14 09:40:58 Job was held. ARC job failed: LRMS error: (-1) Job missing from SLURM Code 0 Subcode 0 ... 009 (19602200.000.000) 2025-03-14 11:03:03 Job was aborted. Python-initiated action. (by user atlpan) ... 009 (19602200.000.000) 2025-03-14 11:03:17 Job was aborted. Python-initiated action. (by user atlpan) This name: PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n is nowhere to find on my server: [root@arcn-node log]# updatedb [root@arcn-node log]# locate PPVNDm5VGD7ngvuSSqSAreymYz3jwmOETUEm1dOSDmbfXLDmHXmz9n [root@arcn-node log]# I have on my site this kind of error The ENDPOINT affected is arcn-node.itim-cj.ro (ARC-CE)It became Critical*at*2025-03-14T09:16:44Z due to *METRIC*org.nordugrid.ARC-CE-sw-gcc *Summary:*Script exited with code 127. Could not match GCC version. See /etc/arc/nagios/20-dist.ini for debugging hints. *Message:*'' which is going to be ok in the messag, one minute later The ENDPOINT affected is arcn-node.itim-cj.ro (ARC-CE) It became Ok *at* 2025-03-14T09:17:53Z due to *METRIC* org.nordugrid.ARC-CE-sw-gcc *Summary: *Found GCC version 11.5.0. *Message: *'' Can you please advice where to look for any clue in solving this mystery? Thank you Felix :-- Dr. Eng. Farcas Felix National Institute of Research and Development of Isotopic and Molecular Technology, IT - Department - Cluj-Napoca, Romania Mobile: +40742195323

1 0

Slurm version 24.05.7 is now available
by Marshall Garey 13 Mar '25

13 Mar '25

We are pleased to announce the availability of Slurm version 24.05.7. This release fixes some stability issues in 24.05, including a crash in slurmctld after updating a reservation with an empty nodelist. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.05.7 > ========================== > -- Fix slurmctld crash when after updating a reservation with an empty > nodelist. The crash could occur after restarting slurmctld, or if > downing/draining a node in the reservation with the REPLACE or REPLACE_DOWN > flag. > -- Fix jobs being scheduled on higher weighted powered down > nodes. > -- Fix memory leak when RestrictedCoresPerGPU is enabled. > -- Prevent slurmctld deadlock in the assoc mgr.

1 0

SLURM_JOB_ACCOUNT var missing in prolog
by Jonás Arce 13 Mar '25

13 Mar '25

Hi everyone, The Slurm variable SLURM_JOB_ACCOUNT is blank in my prolog, currently i have a TaskProlog and a Prolog in my system, in TaskProlog this variable works just fine (I use TaskProlog to set env variables), but in my Prolog (which I use to create temporal directories), it's just blank, it's strange beacuse other variables such as SLURM_JOB_PARTITION, SLURM_JOB_ACCOUNT or SLURM_JOBID work just fine in both Prolog and TaskProlog, I looked into the Slurm doc and it seems that this var should work everywhere, if someone could shed some light into this or tell me another equivalent var i'd appreciate it a lot. I need it because I need to make this type of temporal directories with my Prolog: /scratch-global/$SLURM_JOB_ACCOUNT/$SLURM_JOB_USER/$SLURM_JOBID.

2 1

Job Env Vars in Slurm Core
by Bhaskar Chakraborty 13 Mar '25

13 Mar '25

Hi everyone, I have tried my best to extract custom job environment variables inside a custom select plugin.However, I am not able to get the same. I am able to get the env in a custom client filter plugin during job submission (sbatch --export) but Ineed the same in slurmctld as well. Is there any way this can be achieved. I have looked over few of the internal DS pointers (job_record, job_details etc)but none seem to provide the required functionality. Any insight is appreciated. Regards,Bhaskar.

2 1

Assistance with Node Restrictions and Priority for Users in Floating Partition
by Manisha Yadav 12 Mar '25

12 Mar '25

Dear Team, I have a scenario where I need to provide priority access to multiple users from different projects for only 3 nodes. This means that, at any given time, only 3 nodes can be used in that partition, and if one user is utilizing all 3 nodes, no other user should be able to submit jobs to that partition, or their jobs should remain in the queue. To achieve this, I attempted to use QoS by creating a floating partition with some of the nodes and configuring a QoS with priority. I also set a limit with GrpTRES=gres/gpu=24, given that each node has 8 GPUs, and there are 3 nodes in total. I then attached the QoS to the partition and assigned it to the users who need access. I Also tried MaxTRES=gres/gpu=24 While this setup works as expected in the testing environment for CPUs, it is not functioning as intended in production, and it is not effectively restricting node usage in the partition. Could anyone provide suggestions or guidance on how to properly implement node restrictions along with priority? Thank you for your assistance. Best regards, Manisha Yadav ------------------------------------------------------------------------------------------------------------ [ C-DAC is on Social-Media too. Kindly follow us at: Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ] This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. ------------------------------------------------------------------------------------------------------------

3 5

SLURM queue/partition/qos configuration
by vittorio.confuorto＠gmail.com 12 Mar '25

12 Mar '25

Hi everyone, I need some advice on properly configuring my HPC cluster, which consists of three compute nodes (each with 256 cores and 800GB of RAM). The end users belong to three distinct groups: internal, external, and collaborator. I would like the internal users to have full (and exclusive) access to the first two compute nodes. That is, by default, if they submit a job, it should be scheduled on Node1 or Node2, depending on availability (or placed in the queue if necessary). Internal users should also have access to 100 cores and 200GB of RAM on Node3, with this limit applying as a hard cap across all their jobs. The remaining 156 cores and 600GB of RAM on Node3 should be exclusively available to external and collaborator users. Specifically, I would like the following setup: - The resources on Node3 should be split as follows: - 100 cores and 400GB of RAM for external users. - 56 cores and 200GB of RAM for collaborator users. - External users should be able to use the resources dedicated to collaborator users but with lowest priority. This means an external user can submit a job requesting the resources reserved for collaborators, but the job will only start if no collaborator jobs are in the queue. Any job submitted by a collaborator—even after an external user's job—should take priority. The same rule should apply in reverse for collaborators trying to use external resources. - There should be a group/partition/queue that includes all the remaining 156 cores and 600GB of RAM on Node3. Both external and collaborator users should be able to submit jobs to this queue, but a job submitted here should only start if there are no pending jobs in the two dedicated partitions. What is the best way to implement such an architecture? Thanks, everyone, for your support!

1 0

Slurm Job Kill intimation
by Bhaskar Chakraborty 10 Mar '25

10 Mar '25

Hello All, We wish to do some cleanup when user kills a pending slurm job using scancel. Our setup has a client filter plugin which sets some internal variables while interacting to a remote process.This needs to be undone during job termination. Is there a way to do this (using submitter credentials) ? Also, if one is to use a custom select plugin is there a way to inform select that the job is terminated.Presently, we don't find that slurmctld informs select plugin when a pending job is killed. Thanks in advance for any pointers ! Regards,Bhaskar.

1 0

Slurm upgrade using Debian packages
by Matthias Leopold 10 Mar '25

10 Mar '25

Hi, I'm building Slurm Debian packages from SchedMD sources using this tutorial https://www.schedmd.com/slurm/installation-tutorial/. Now I tried upgrading (minor release upgrade within 24.05) using these packages. https://slurm.schedmd.com/upgrades.html tells me to upgrade (a) slurmdbd (b) slurmctld (c) slurmd separately in this order, stopping each service for the upgrade. How can I follow this when the Debian packages have a dependency between slurmdbd + slurmctld that upgrades both packages at the same time? thx Matthias

4 7

allowing spyder-kernels to an interactive session without pam_slurm_adopt and older version of Slurm from OpenHPC repo; parmiko?
by Robert Kudyba 06 Mar '25

06 Mar '25

So the Spyder IDE has this great feature to connect a local/laptop/workstation to a spyder-kernels session <https://docs.spyder-ide.org/current/panes/ipythonconsole.html#using-externa…>. If a user starts an interactive, e.g., srun session, they end up on a compute node which is on one of our older clusters without the pam_slurm_adopt module. Is there a way with a library like Parmiko or this slurmjob <https://github.com/daangeijs/deepops-slurmjob> package? I see for vscode an admin posted the following option <https://github.com/microsoft/vscode-remote-release/issues/1722#issuecomment…> : if [[ -v SSH_AUTH_SOCK ]]; then if [[ ${SSH_AUTH_SOCK} =~ vscode ]]; then [ -f ~/.code-tunnel-env.bash ] && source ~/.code-tunnel-env.bash fi fi Is there a way to work around the restriction of non admins to connect to the spyder-kernel session? Is there anything similar to batchspawner for Jupyterhub <https://github.com/jupyterhub/batchspawner>? Unless anyone knows of an archive for Slurm slurm-ohpc-18.08 that includes pam_adopt?

1 0

Slurm versions 24.11.3 is now available
by Marshall Garey 06 Mar '25

06 Mar '25

We are pleased to announce the availability of Slurm version 24.11.3. 24.11.3 fixes the database cluster ID generation not being random, a regression in which slurmd -G gave no output, a long-standing crash in slurmctld after updating a reservation with an empty nodelist, and some other minor to moderate bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.11.3 > ========================== > -- Fix race condition in slurmrestd that resulted in "Requested > data_parser plugin does not support OpenAPI plugin" error being returned > for valid endpoints. > -- If multiple partitions are requested, set the SLURM_JOB_PARTITION > output environment variable to the partition in which the job is running > for salloc and srun in order to match the documentation and the behavior of > sbatch. > -- Fix regression where slurmd -G gives no output. > -- Don't print misleading errors for stepmgr enabled steps. > -- slurmrestd - Avoid connection to slurmdbd for the following > endpoints: > GET /slurm/v0.0.41/jobs > GET /slurm/v0.0.41/job/{job_id} > -- slurmrestd - Avoid connection to slurmdbd for the following > endpoints: > GET /slurm/v0.0.40/jobs > GET /slurm/v0.0.40/job/{job_id} > -- Significantly increase entropy of clusterid portion of the > sluid by seeding the random number generator > -- Avoid changing process name to "watch" from original daemon name. > This could potentially breaking some monitoring scripts. > -- Avoid slurmctld being killed by SIGALRM due to race condition > at startup. > -- Fix slurmctld crash when after updating a reservation with an empty > nodelist. The crash could occur after restarting slurmctld, or if > downing/draining a node in the reservation with the REPLACE or REPLACE_DOWN > flag. > -- Fix race between task/cgroup cpuset and jobacctgather/cgroup. > The first was removing the pid from task_X cgroup directory causing > memory limits to not be applied. > -- srun - Fixed wrongly constructed SLURM_CPU_BIND env variable > that could get propagated to downward srun calls in certain mpi > environments, causing launch failures. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.40. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.41. > -- slurmrestd - Fix possible memory leak when parsing arrays with > data_parser/v0.0.42.

1 0

broken SLURM-PMIX out-of-band communication on v24.11.0 with PMIx v5
by Bertini, Denis Dr. 06 Mar '25

06 Mar '25

Hi there, Using slurm v24.11.0 together with openMPI 5.0.7 built with openpmix v5.0.6 i am facing a systematical crash at process wiring-up phase when launching standard MPI job (OSU benchmarks ) on our new AMD compute nodes ( amd-epyc 9654, 192 phys. cores +HT ) running Rocky Linux 9.4 OS The typical error reads: slurmstepd: error: mpi/pmix_v5: pmixp_p2p_send: ccexe0094 [4]: pmixp_utils.c:469: send failed, rc=1001, exceeded the retry limit slurmstepd: error: mpi/pmix_v5: _slurm_send: ccexe0094 [4]: pmixp_server.c:1581: Cannot send message to /var/spool/slurmd/stepd.slurm.pmix.656.0, size = 46979, hostlist: (null) srun: error: Node failure on ccexe0091 after such a error as you can see the node move to state down It looks like the slurmstep pmix_server can not use the local socket at var/spool/slurmd/stepd.slurm.pmix.job_id.0 for inter-node communication . * On one AMD node ( same SLURM version, same cluster setup ) wiring up works smoothly even at core satuation (192 cores used) * On Intel node (intel,xeon,gold6248r, 48 cores ) wiring-up works even with multiple node without any problem * When the problematic AMD nodes are setup as dynamic node<https://slurm.schedmd.com/dynamic_nodes.html> the wiring-up phase with multiple nodes works perfectly, without any issue Has anybody experienced this kind of problem? Any idea what could be the reason for that? I also add that when the problematic AMD nodes are setup as dynamic node<https://slurm.schedmd.com/dynamic_nodes.html> the wiring-up phase with multiple nodes works perfectly, without any issue Cheers, Denis * --------- Denis Bertini Abteilung: CIT Ort: SB3 2.265a Tel: +49 6159 71 2240 Fax: +49 6159 71 2986 E-Mail: d.bertini(a)gsi.de GSI Helmholtzzentrum für Schwerionenforschung GmbH Planckstraße 1, 64291 Darmstadt, Germany, www.gsi.de Commercial Register / Handelsregister: Amtsgericht Darmstadt, HRB 1528 Managing Directors / Geschäftsführung: Professor Dr. Paolo Giubellino, Dr. Ulrich Breuer, Jörg Blaurock Chairman of the GSI Supervisory Board / Vorsitzender des GSI-Aufsichtsrats: Ministerialdirigent Dr. Volkmar Dietz

1 0

error in logs, does it mean anything?
by Steven Jones 05 Mar '25

05 Mar '25

[2025-03-06T00:26:06.002] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:31:06.002] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:36:06.001] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port [2025-03-06T00:41:07.001] error: _add_registered_cluster: trying to register a cluster (poc-cluster) with no remote port regards Steven

1 0

Re: mariadb refusing access
by Steven Jones 05 Mar '25

05 Mar '25

Yes that is set, and my settings are, # slurmDBD info DbdAddr=localhost DbdHost=vuwunicoslurmd3.ods.vuw.ac.nz #DbdHost=localhost DbdPort=6819 SlurmUser=slurm #MessageTimeout=300 DebugLevel=verbose #DefaultQOS=normal,standby LogFile=/var/log/slurm/slurmdbd.log PidFile=/var/run/slurmdbd/slurmdbd.pid #PluginDir=/usr/lib/slurm #PrivateData=accounts,users,usage,jobs #TrackWCKey=yes # # Database info StorageType=accounting_storage/mysql #StorageHost=localhost StorageHost=localhost #StoragePort=1234 #StoragePort=3306 StoragePass=xxxxxxxx StorageUser=slurm StorageLoc=slurm_acct_db #ssj regards Steven ________________________________ From: Sarlo, Jeffrey S <JSarlo(a)Central.UH.EDU> Sent: Thursday, 6 March 2025 7:42 am To: Steven Jones <steven.jones(a)vuw.ac.nz> Subject: RE: [slurm-users] Re: mariadb refusing access You don't often get email from jsarlo(a)central.uh.edu. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Do you have the correct password listed in the slurmdbd.conf file? That was toward the bottom of the Wiki that Ole sent. Jeff From: Steven Jones via slurm-users <slurm-users(a)lists.schedmd.com> Sent: Wednesday, March 5, 2025 12:39 PM To: slurm-users(a)lists.schedmd.com; Ole Holm Nielsen <Ole.H.Nielsen(a)fysik.dtu.dk> Subject: [slurm-users] Re: mariadb refusing access Sorry, I dont follow you, Pass word works fine and grant looks OK. [root@vuwunicoslurmd3 ~]# mysql -u slurm -p Enter password: Welcome to the MariaDB monitor. Commands end with ; or \g. Your MariaDB connection id is 208 Server version: 10.11.10-MariaDB MariaDB Server Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MariaDB [(none)]> show grants; +--------------------------------------------------------------------------------------------------------------+ | Grants for slurm@localhost | +--------------------------------------------------------------------------------------------------------------+ | GRANT USAGE ON *.* TO `slurm`@`localhost` IDENTIFIED BY PASSWORD '*2F4EEC707189D8B5E329829B9303058EF7585569' | | GRANT ALL PRIVILEGES ON `slurm_acct_db`.* TO `slurm`@`localhost` | +--------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.000 sec) MariaDB [(none)]> Isnt there something about password encryption / password hash? regards Steven ________________________________ From: Ole Holm Nielsen via slurm-users <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> Sent: Wednesday, 5 March 2025 9:25 pm To: slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> <slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com>> Subject: [slurm-users] Re: mariadb refusing access On 3/5/25 02:23, Steven Jones via slurm-users wrote: > In the logs I am seeing, > > root@vuwunicoslurmd3 mariadb]# tail -f mariadb.log > 2025-03-04 19:01:32 12565 [Warning] Access denied for user > 'slurm'@'localhost' (using password: YES) > 2025-03-04 19:06:19 12566 [Warning] Access denied for user > 'slurm'@'localhost' (using password: YES) > > However mysql -u slurm -p works just fine so it seems to be a config > error for slurmdbd It seems that you didn't select a suitable slurm user’s database password, see https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.fysi…<https://urldefense.com/v3/__https:/apc01.safelinks.protection.outlook.com/?…> IHTH, Ole -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com<mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com<mailto:slurm-users-leave@lists.schedmd.com>

1 1

mariadb refusing access
by Steven Jones 05 Mar '25

05 Mar '25

In the logs I am seeing, root@vuwunicoslurmd3 mariadb]# tail -f mariadb.log 2025-03-04 19:01:32 12565 [Warning] Access denied for user 'slurm'@'localhost' (using password: YES) 2025-03-04 19:06:19 12566 [Warning] Access denied for user 'slurm'@'localhost' (using password: YES) However mysql -u slurm -p works just fine so it seems to be a config error for slurmdbd Any ideas please? regards Steven

4 6

Tracking costs - variable costs per partition
by Jeffrey A Dusenberry 05 Mar '25

05 Mar '25

Hello - We're in a similar situation as was described here: https://groups.google.com/g/slurm-users/c/eBDslkwoFio where we want to track (and control) costs on a fairly heterogenous system with different billing weights per partition. The solution proposed seems like it would work rather well, except our use of fairshare seems to interfere with the billing values we would want to use to limit usage based on credits granted. We have PriorityDecayHalfLife set on our system, so that billing value (GrpTRESRaw) seems to drop with time. Is there a way to implement something similar on an otherwise fairshare-based system? Thanks, Jeff

1 0

orted errors
by Berg, Stephen P CIV USN NRL DET SSC MS (USA) 04 Mar '25

04 Mar '25

I'm running a small-ish slurm grid, 87 nodes with various hardware. On a few occasions lately users submitting jobs will get an orted error and the job fails. Try again a few hours later or the next day and the same job runs just fine. Google-fu indicated it might be a DNS issue if for whatever reason a node couldn't figure out the address for other nodes in the job. So I populated the /etc/hosts on each node with a complete listing of all the nodes so there wouldn't be any reliance on DNS. And that very afternoon another job failed with orted. So it seems at least in my case DNS isn't the issue. What's the best way to troubleshoot this when orted fails but doesn't give any sort of error to indicate what the root cause of the failure might be? And I also can't predictably induce the failure, just have to wait until it randomly chokes.

2 1

Slurm versions 24.11.2 and 24.05.6 are now available
by Marshall Garey 04 Mar '25

04 Mar '25

We are pleased to announce the availability of Slurm versions 24.11.2 and 24.05.6. 24.11.2 fixes a variety of minor to major bugs. Fixed regressions include loading non-default QOS on pending jobs from pre-24.11 state, pending jobs displaying QOS=(null) when not explicitly requesting a QOS, running jobs that requested multiple partitions potentially having an incorrect partition when slurmctld is restarted, and burst_buffer.lua failing if slurm.conf is in a non-standard location. This release also fixes a few crashes in slurmctld: crashing when a job that can preempt requests --test-only, crasing when the scheduler evaluates a job on nodes with suspended jobs, and crashing due to a long-standing bug causing a job record without job_resrcs. 24.05.6 fixes sattach with auth/slurm, a slurmrestd crash when using data_parser/v0.0.40, a slurmctld crash when using job suspension, a performance regression for RPCs with large amounts of data, and some other moderate severity bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.11.2 > ========================== > -- Fix segfault when submitting --test-only jobs that can preempt. > -- Fix regression introduced in 23.11 that prevented the following > flags from being added to a reservation on an update: > DAILY, HOURLY, WEEKLY, WEEKDAY, and WEEKEND. > -- Fix crash and issues evaluating job's suitability for running in > nodes with already suspended job(s) there. > -- Slurmctld will ensure that healthy nodes are not reported as > UnavailableNodes in job reason codes. > -- Fix handling of jobs submitted to a current reservation with > flags OVERLAP,FLEX or OVERLAP,ANY_NODES when it overlaps nodes with a > future maintenance reservation. When a job submission had a time limit that > overlapped with the future maintenance reservation, it was rejected. Now > the job is accepted but stays pending with the reason "ReqNodeNotAvail, > Reserved for maintenance". > -- pam_slurm_adopt - avoid errors when explicitly setting > some arguments to the default value. > -- Fix qos preemption with PreemptMode=SUSPEND > -- slurmdbd - When changing a user's name update lineage > at the same time. > -- Fix regression in 24.11 in which burst_buffer.lua does not > inherit the SLURM_CONF environment variable from slurmctld and fails to run > if slurm.conf is in a non-standard location. > -- Fix memory leak in slurmctld if select/linear and the > PreemptParameters=reclaim_licenses options are both set in slurm.conf. > Regression in 24.11.1. > -- Fix running jobs, that requested multiple partitions, from > potentially being set to the wrong partition on restart. > -- switch/hpe_slingshot - Fix compatibility with newer cxi > drivers, specifically when specifying disable_rdzv_get. > -- Add ABORT_ON_FATAL environment variable to capture a backtrace > from any fatal() message. > -- Fix printing invalid address in rate limiting log statement. > -- sched/backfill - Fix node state PLANNED not being cleared from > fully allocated nodes during a backfill cycle. > -- select/cons_tres - Fix future planning of jobs with bf_licenses. > -- Prevent redundant "on_data returned rc: Rate limit exceeded, > please retry momentarily" error message from being printed in > slurmctld logs. > -- Fix loading non-default QOS on pending jobs from pre-24.11 state. > -- Fix pending jobs displaying QOS=(null) when not explicitly > requesting a QOS. > -- Fix segfault issue from job record with no job_resrcs > -- Fix failing sacctmgr delete/modify/show account operations > with where clauses. > -- Fix regression in 24.11 in which Slurm daemons started catching > several SIGTSTP, SIGTTIN and SIGUSR1 signals and ignored them, while before > they were not ignoring them. This also caused slurmctld to not being > able to shutdown after a SIGTSTP because slurmscriptd caught the signal > and stopped while slurmctld ignored it. Unify and fix these situations and > get back to the previous behavior for these signals. > -- Document that SIGQUIT is no longer ignored by slurmctld, > slurmdbd, and slurmd in 24.11. As of 24.11.0rc1, SIGQUIT is identical to > SIGINT and SIGTERM for these daemons, but this change was not documented. > -- Fix not considering nodes marked for reboot without ASAP > in the scheduler. > -- Remove the boot^ state on unexpected node reboot after > return to service. > -- Do not allow new jobs to start on a node which is being rebooted > with the flag nextstate=resume. > -- Prevent lower priority job running after cancelling an ASAP reboot. > -- Fix srun jobs starting on nextstate=resume rebooting nodes. > > * Changes in Slurm 24.05.6 > ========================== > -- data_parser/v0.0.40 - Prevent a segfault in the slurmrestd when > dumping data with v0.0.40+complex data parser. > -- Fix sattach when using auth/slurm. > -- scrun - Add support '--all' argument for kill subcommand. > -- Fix performance regression while packing larger RPCs. > -- Fix crash and issues evaluating job's suitability for running in > nodes with already suspended job(s) there. > -- Fixed a job requeuing issue that merged job entries into the > same SLUID when all nodes in a job failed simultaneously. > -- switch/hpe_slingshot - Fix compatibility with newer cxi > drivers, specifically when specifying disable_rdzv_get. > -- Add ABORT_ON_FATAL environment variable to capture a backtrace > from any fatal() message.

7 6

Re: how to set slurmdbd.conf if using two slurmdb node with HA database?
by taleintervenor＠sjtu.edu.cn 27 Feb '25

27 Feb '25

Do you mean the second configuration scheme? I think configuring `dbdhost=localhost` is the same as configuring ` DbdAddr =nodeC` and ` DbdAddr =nodeD` on the two nodes respectively. The key point is whether we should set the DbdBackupHost option and how it work? 发件人: Daniel Letai <dani(a)letai.org.il> 发送时间: 2025年2月19日 18:21 收件人: slurm-users(a)lists.schedmd.com 主题: [slurm-users] Re: how to set slurmdbd.conf if using two slurmdb node with HA database? I'm not sure it will work, didn't test it, but could you just do `dbdhost=localhost` to solve this? On 18/02/2025 11:59, hermes via slurm-users wrote: The deployment scenario is as follows: nodeA nodeB (slurmctld) (backup slurmctld) | \-------------------------------/ | | / \ | nodeC nodeD (slurmdbd) (backup slurmdbd) (mysql) <--multi master replica--> (mysql) Since the database is multi-master replicated, the slurmdbd should only talk to the mysql on its own node. In such case, how should we set the slurmdbd.conf? The conf file contains options “DbdAddr”, “DbdHost” and “DbdBackupHost”. Should they be consistent between nodeA-2 and nodeB-2? Such as: DbdAddr = nodeC | DbdAddr = nodeC DbdHost = nodeC | DbdHost = nodeC DbdBackupHost = nodeD | DbdBackupHost = nodeD StorageHost = nodeC | StorageHost = nodeD Or maybe just set different conf and don’t use the “DbdBackupHost” like: DbdAddr = nodeC | DbdAddr = nodeD DbdHost = nodeC | DbdHost = nodeD StorageHost = nodeC | StorageHost = nodeD I’m quite confused about the usage of DbdAddr and DbdHost. What is the difference between them and why only DbdHost has the backup one? Another confusing point is how DbdBackupHost work. I guess It is slurmctld that is responsible for selecting the available slurmdbd. Since the slurm.conf already contains “AccountingStorageHost” and “AccountingStorageBackupHost”, why we need set backupdbd again on slurmdbd side?

4 10

Limit CPUs per job (but not per user, partition or node)
by Herbert Fruchtl 26 Feb '25

26 Feb '25

We have a cluster with multi-core nodes (168) that can be shared by multiple jobs at the same time. How do I configure a partition such that it only accepts jobs requesting up to (say) 8 cores, but will run multiple jobs at the same time? The following is apparently not working: PartitionName=debug Nodes=node01 MaxTime=02:00:00 DefMemPerCPU=1000 MaxCPUsPerNode=8 Default=NO It allows one job using 8 cores, but a second one will not start because the limit is apparently for the partition as a whole. Thanks in advance, Herbert -- Herbert Fruchtl (he/him) Senior Scientific Computing Officer / HPC Administrator School of Chemistry, IT Services University of St Andrews -- The University of St Andrews is a charity registered in Scotland: No SC013532

3 2

Re: MinTRES in QoS and power saving
by Patryk Bełzak 26 Feb '25

26 Feb '25

Hi, there was this issue raised some time ago: https://www.mail-archive.com/slurm-users@lists.schedmd.com/msg10799.html We're experiencing exactly the same issue now with GPU nodes in power saving, some (but not all) jobs doesn't start because of that, and it's annoying users - badly. Anyone experienced something similiar? Or maybe Stefan has a solution? (we're on version 24.05.5) Best regards Patryk Belzak. -- HPC Administrator Wroclaw Centre for Networking and Supercomputing

1 0

Shard conf weirdness
by Reed Dier 24 Feb '25

24 Feb '25

Hoping someone can help me pin down the weirdness I’m experiencing. There are actually two issues, I’ve run into, the root issue, and then something odd when trying to work around the root issue. v23.11.10 - Ubuntu 22.04 - slurm-smd debs built <https://slurm.schedmd.com/archive/slurm-23.11.10/quickstart_admin.html#debu…> from the tarball. I have 2 slurmctld daemons, and 1 slurmdbd daemon. The slurm.conf is consistent across the cluster, all ctld,dbd,slurmd, have the same shasum hash. The backup slurmctld does not appear to like the gres configured on my gpu nodes, despite the primary slurmctld having no issues. When failing over with scontrol takeover, I get the following log messages on the secondary slurmctld, where it complains about a reported, but not configured typed gres/shard. > [2025-02-21T05:02:02.017] error: Setting node $HOST2 state to INVAL with reason:gres/shard type (p100) reported but not configured > [2025-02-21T05:02:02.018] drain_nodes: node $HOST2 state set to DRAIN > [2025-02-21T05:02:02.018] error: _slurm_rpc_node_registration node=$HOST2: Invalid argument > [2025-02-21T05:02:02.020] error: Setting node $HOST3 state to INVAL with reason:gres/shard type (p40) reported but not configured > [2025-02-21T05:02:02.020] drain_nodes: node $HOST3 state set to DRAIN > [2025-02-21T05:02:02.020] error: _slurm_rpc_node_registration node=$HOST3: Invalid argument > [2025-02-21T05:02:02.023] error: Setting node $HOST1 state to INVAL with reason:gres/shard type (t4) reported but not configured > [2025-02-21T05:02:02.020] drain_nodes: node $HOST1 state set to DRAIN > [2025-02-21T05:02:02.023] error: _slurm_rpc_node_registration node=$HOST1: Invalid argument And looking at those hosts in the slurm.conf, the shards are not typed, but generic. > NodeName=$HOST1 [SNIP] State=UNKNOWN Gres=gpu:t4:2,shard:8 > NodeName=$HOST2 [SNIP] State=UNKNOWN Gres=gpu:p100:2,shard:8 > NodeName=$HOST3 [SNIP] State=UNKNOWN Gres=gpu:p40:2,gpu:p100:2,shard:16 I should also point out at this point that my gres.conf is just AutoDetect=nvml. I am not explicitly mapping any devices. So this is problem 1, the slurmctld behaving differently between daemons, where the primary has zero issue with the configuration, but the secondary balking and draining the nodes consistently. Moving on to problem 2, which is me trying to solve the issue, and running into a different issue. I decided to try to add the typed gres/shards to both the AccountingStorageTRES, and the NodeName lists. > NodeName=$HOST1 [SNIP] State=UNKNOWN Gres=gpu:t4:2,shard:t4:8 > NodeName=$HOST2 [SNIP] State=UNKNOWN Gres=gpu:p100:2,shard:p100:8 > NodeName=$HOST3 [SNIP] State=UNKNOWN Gres=gpu:p40:2,gpu:p100:2,shard:p40:8,shard:p100:8 Now the secondary slurmctld is happy and no longer immediately drains the gpu nodes for the invalid gres. However, the node ($HOST3) with a mixed set of gpus is now complaining. > [2025-02-23T21:41:05.311] gpu/nvml: _get_system_gpu_list_nvml: 4 GPU system device(s) detected > [2025-02-23T21:41:05.311] fatal: _build_shared_list: bad configuration, multiple configurations without "File" No matter what I tried, any line of the NodeName with multiple shard:$type:$num generates the _build_shared_list error above. I tried re-ordering the list as gpu,shard,gpu,shard to no avail, I tried having untyped shards, with typed shards after that, but then it complained about too many shards (double the intended number, $untyped + $typed = too many) So my current solution is to have the slurm conf in sync everywhere BUT the host(s) with multiple gpu models in the same host, where I had to revert to untyped gres on those slurmd’s, but on the slurmctlds they are typed gres. Hopefully I’ve done a decent job of explaining the corner case, enough that someone can point me in the direction of figuring out whats going on, and what is the “correct” way of doing this. I tried increasing the slurmd and slurmctld logging to debug2, to nothing that stood out beyond what was already gathered. > [2025-02-23T21:46:44.895] debug: GRES[shard] Type:p100 Count:8 Cores(88):(null) Links:(null) Flags:HAS_TYPE File:(null) UniqueId:(null) > [2025-02-23T21:46:44.895] debug: GRES[shard] Type:p40 Count:8 Cores(88):(null) Links:(null) Flags:HAS_TYPE File:(null) UniqueId:(null) > [2025-02-23T21:46:44.895] fatal: _build_shared_list: bad configuration, multiple configurations without "File" Any ideas are greatly appreciated, Reed

1 0

2025

2024

slurm-users ----- 2025 ----- June 2025 May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users