- slurm-users - lists.schedmd.com

Resource guarantees
by christopher.furbee＠jhuapl.edu 23 Dec '24

23 Dec '24

Hello, Long time SGE admin, new SLURM admin here. I recently started the transition of all my clusters from SGE to SLURM and everything was great until I hit the "Taco Bell" cluster (fake name). Taco Bell supports 4 projects and under SGE we had a priority system setup using projects to balance the queue. For the life of me I have been unable to replicate this in SLURM. We are looking to configure guaranteed resources based on the project. I had thought we could accomplish this with QOS and accounts but so far we have failed. What we would like to end up with is; When project Gordita is running uncontested 100% of the cluster is available. While Gordita is running, if Crunchwrap submits their jobs we want the scheduler to prioritize those jobs until a 75% Gordita, 25% Crunchwrap balance of jobs is reached. No preempting or priority overriding, just as a Gordita job finishes, if Crunchwrap is less than 25%, start a Crunchwrap job. And then maintain that balance until one of the projects jobs are 100% completed. Any assistance or guidance is greatly appreciated.

1 0

Slurm plugin for custom hardware allocation
by Laura Zharmukhametova 23 Dec '24

23 Dec '24

Hello, Is there an existing Slurm plugin for FPGA allocation? If not, can someone please point me in the right direction for how to approach it. Many thanks

2 1

sending mails wit smail on rocky9
by Marcus Wagner 19 Dec '24

19 Dec '24

Hi all, I have a problem with sending mails on rocky 9 via Slurm. One needs to install s-nail to have "/bin/mail" being available. There are some caveats in smail. In the second part (for the message, when the job began) one need to pipe ( eg echo "") into $MAIL, even in a script with no input, s-nail wants to be interactive. but it suffices to echo an empty text to snail. Nonetheless, I don't get any mail through. it seems the, mailprog for some reason gets killed or errors out for some other reason. While it is perfectionally working if run from the console :/ I all the time get in the slurmctld.log the following: 27212:[2024-12-19T15:54:54.935] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27213:[2024-12-19T15:54:54.945] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27214:[2024-12-19T15:54:54.945] error: MailProg returned error, it's output was '' 27395:[2024-12-19T15:55:55.540] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27396:[2024-12-19T15:55:55.551] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27397:[2024-12-19T15:55:55.551] error: MailProg returned error, it's output was '' 27438:[2024-12-19T15:56:55.981] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27439:[2024-12-19T15:56:55.981] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27440:[2024-12-19T15:56:55.992] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27441:[2024-12-19T15:56:55.992] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 9 27442:[2024-12-19T15:56:55.992] error: MailProg returned error, it's output was '' 27443:[2024-12-19T15:56:55.992] error: MailProg returned error, it's output was '' 27450:[2024-12-19T15:56:58.849] slurmscriptd: error: run_command: killing MailProg operation on shutdown 27451:[2024-12-19T15:56:58.859] slurmscriptd: _run_script: JobId=0 MailProg killed by signal 0 any hints? Best Marcus -- Dipl.-Inf. Marcus Wagner stellv. Gruppenleitung IT Center Gruppe: Server, Storage, HPC Abteilung: Systeme und Betrieb RWTH Aachen University Seffenter Weg 23 52074 Aachen Tel: +49 241 80 24383 wagner(a)itc.rwth-aachen.de www.itc.rwth-aachen.de Social-Media-Kanäle des IT Centers: https://blog.rwth-aachen.de/itc/ https://www.facebook.com/itcenterrwth https://www.linkedin.com/company/itcenterrwth https://twitter.com/ITCenterRWTH https://www.youtube.com/c/ITCenterRWTHAachen

1 0

lua, glib, gtk, kafka not found for slurm 24.11 and Alma 8
by Bernd Melchers 17 Dec '24

17 Dec '24

Dear all, i tried to rpmbuild slurm-24.11.0 for Alma Linux 8. Build failed because some installed Packages are not found by slurms configure script: rdkafka, glib, gtp and lua But all these packages are installed and they are found by slurm-24.05.x: librdkafka-1.6.1-1.el8.x86_64 librdkafka-devel-1.6.1-1.el8.x86_64 lua-5.3.4-12.el8.x86_64 lua-devel-5.3.4-12.el8.x86_64 glib2-2.56.4-165.el8_10.x86_64 glib2-devel-2.56.4-165.el8_10.x86_64 gtk2-2.24.32-5.el8.x86_64 gtk2-devel-2.24.32-5.el8.x86_64 gtk3-3.22.30-12.el8_10.x86_64 gtk3-devel-3.22.30-12.el8_10.x86_64 Mit freundlichen Grüßen Bernd Melchers -- Archiv- und Backup-Service | fab-service(a)zedat.fu-berlin.de Freie Universität Berlin | Tel. +49-30-838-55905

2 3

AllocNode:Sid in scontrol but not sacct?
by Chris Taylor 17 Dec '24

17 Dec '24

Does the accounting database keep this? Maybe I'm missing something but I don't see a way to query for it in sacct. Chris

1 1

job_container/tmpfs, TmpFS and TmpDisk usage
by Paul Musset 16 Dec '24

16 Dec '24

Hello, I have multiple questions about the usage of job_container/tmpfs, and the TmpFS and TmpDisk variables 1) If my job_container.conf files contains: ``` BasePath=/mnt/slurm_tmp Shared=true ``` is it important what I set TmpFS to in slurm.conf ? Should I set it to '/mnt/slurm_tmp' or '/tmp' ? 2) What size should I put in TmpDisk ? the size advertised by df ? 3) Finally, is there any recommended file system for the partition used as the job_container/tmpfs BasePath ? Best regards, Paul Musset Max Planck Institute for Brain Research

1 0

Difference between sreport's cpu time usage and sacct -j usage
by KK 14 Dec '24

14 Dec '24

Hi all, I have observed a significant discrepancy in CPU usage time calculations between sreport and sacct, and I would like to understand the underlying cause. Let me share the specific case I encountered when calculating CPU usage time for user zt23132881r from November 1, 2024, to November 30, 2024. 1. sreport Results (995,171 minutes): -------------------------------------------------------------------------------- *[root@master ~]# sreport Cluster UserUtilizationByAccount user=zt23132881r start=2024-11-01 end=2024-11-30--------------------------------------------------------------------------------Cluster/User/Account Utilization 2024-11-01T00:00:00 - 2024-11-29T23:59:59 (2505600 secs)Usage reported in CPU Minutes-------------------------------------------------------------------------------- Cluster Login Proper Name Account Used Energy--------- --------- --------------- --------------- -------- ---------djhpc-po+ zt231328+ zt23132881r zt+ zt23132881r_ba+ 995171 6294875* 2. sacct Results: # Without truncate (1,019,927 minutes / 61,195,668 seconds) *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" -X |awk 'BEGIN{total=0}{total+=$6}END{print total}'61195668* # With truncate (967,165 minutes / 58,029,908 seconds) *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" -X --truncate |awk 'BEGIN{total=0}{total+=$6}END{print total}'58029908* # No -X *[root@master ~]# sacct -u zt23132881r -S 2024-11-01 -E 2024-11-30 -o "jobid,partition,account,user,alloccpus,cputimeraw,state" |awk 'BEGIN{total=0}{total+=$6}END{print total}'61195668* The results show three different values: - *sreport: 995,171 minutes* - *sacct (without truncate): 1,019,927 minutes* - *sacct (with truncate): 967,165 minutes* I would appreciate if someone could explain: - Which of these results is more accurate? - How does sreport calculate CPU usage time? - Why does the --truncate option in sacct lead to different results? Thank you for your assistance in clarifying these discrepancies. Best regards

2 1

Node configuration unavailable when using --mem-per-gpu , for specific GPU type
by Matthew R. Baney 13 Dec '24

13 Dec '24

Hi all, I'm seeing some odd behavior when using the --mem-per-gpu flag instead of the --mem flag to request memory when also requesting all available CPUs on a node (in this example, all available nodes have 32 CPUs): $ srun --ntasks-per-node=8 --cpus-per-task=4 --gpus-per-node=gtx1080ti:1 --mem-per-gpu=1g --pty bash srun: error: Unable to allocate resources: Requested node configuration is not available $ srun --ntasks-per-node=8 --cpus-per-task=4 --gpus-per-node=gtx1080ti:1 --mem=1g --pty bash srun: job 3479971 queued and waiting for resources srun: job 3479971 has been allocated resources $ The nodes in this partition have a mix of gtx1080ti and rtx2080ti GPUs, but only one type of GPU is in any one node. The same behavior does not occur when requesting a (node with a) rtx2080ti instead. Is there something I'm missing that would cause the --mem-per-gpu flag to not be working in this example? Thanks, Matthew

1 0

Adding gres usage to the accounting database
by Mark Dixon 13 Dec '24

13 Dec '24

Hello! Our jobs can ask for dedicated per-node disk space, e.g. "--gres=tmp:1G", where an ephemeral directory is managed by the site prolog/epilog and usage is capped using an xfs project quota. This works well, although we really need to look at job_container/tmpfs. I note that slurm already periodically polls jobs for their memory usage, which finds its way into the accounting database tres_usage fields. What would be really nice is if we could extend this polling so that we feed our xfs project quota utilisation into the accounting database, too: users get feedback on what their jobs need, and we notice people who ask for a fraction of a node and all of the disk space, but not use it. Slurm is famous for being extendible. Is there some sort of plugin hook someone can point me at to have a go with, or am I missing a simpler method, please? Thanks! Mark

1 0

Slurm version 24.05.5 is now available
by Marshall Garey 12 Dec '24

12 Dec '24

We are pleased to announce the availability of Slurm version 24.05.5. This release fixes a few potential crashes, several stepmgr bugs, compatibility for sstat and sattach with newer version steps, and some other minor bugs. Downloads are available at https://www.schedmd.com/downloads.php . -- Marshall Garey Release Management, Support, and Development SchedMD LLC - Commercial Slurm Development and Support > * Changes in Slurm 24.05.5 > ========================== > -- Fix issue signaling cron jobs resulting in unintended requeues. > -- Fix slurmctld memory leak in implementation of HealthCheckNodeState=CYCLE. > -- job_container/tmpfs - Fix SLURM_CONF env variable not being properly set. > -- sched/backfill - Fix job's time_limit being overwritten by time_min for job > arrays in some situations. > -- RoutePart - fix segfault from incorrect memory allocation when node doesn't > exist in any partition. > -- slurmctld - Fix crash when a job is evaluated for a reservation after > removal of a dynamic node. > -- gpu/nvml - Attempt loading libnvidia-ml.so.1 as a fallback for failure in > loading libnvidia-ml.so. > -- slurmrestd - Fix populating non-required object fields of objects as '{}' in > JSON/YAML instead of 'null' causing compiled OpenAPI clients to reject > the response to 'GET /slurm/v0.0.40/jobs' due to validation failure of > '.jobs[].job_resources'. > -- Fix sstat/sattach protocol errors for steps on higher version slurmd's > (regressions since 20.11.0rc1 and 16.05.1rc1 respectively). > -- slurmd - Avoid a crash when starting slurmd version 24.05 with > SlurmdSpoolDir files that have been upgraded to a newer major version of > Slurm. Log warnings instead. > -- Fix race condition in stepmgr step completion handling. > -- Fix slurmctld segfault with stepmgr and MpiParams when running a job array. > -- Fix requeued jobs keeping their priority until the decay thread happens. > -- slurmctld - Fix crash and possible split brain issue if the > backup controller handles an scontrol reconfigure while in control > before the primary resumes operation. > -- Fix stepmgr not getting dynamic node addrs from the controller > -- stepmgr - avoid "Unexpected missing socket" errors. > -- Fix `scontrol show steps` with dynamic stepmgr > -- Support IPv6 in configless mode

1 0