- slurm-users - lists.schedmd.com

Slurm sacct ResvCPURAW invalid field in version 24.12.5
by Mike Mikailov 29 Jul '24

29 Jul '24

Dear All, Does anyone know what is the equivalent field for ResvCPURAW of sacct command of Slurm in its version 23.11.5. I get: sacct: error: Invalid field requested “ResvCPURAW”. Your help at your earliest is very much appreciated. Best, -Mike Sent from my iPhone

2 1

Background tasks in Slurm scripts?
by Steffen Grunewald 26 Jul '24

26 Jul '24

Good morning, yesterday I came across a Slurm (sbatch) script that, after doing some stuff in the foreground, runs another executable in the background - and doesn't "wait" for it to finish - literally the last line of the script is executable & (and that executable is supposed to take several 10 seconds or more to finish) How would Slurm handle this? Will the end of the script immediately trigger the job epilog, and what would happen to the leftover task? This certainly is discussed … [View More]

3 3

API - Specify GPUs
by jpuerto＠psc.edu 26 Jul '24

26 Jul '24

Good Afternoon All, It does not seem that the REST API allows for folks to configure their jobs to utilize GPUs, using the traditional methods. IE, there does not appear to be an equivalent between the --gpus (or --gres) flag on sbatch/srun and the REST API's job submission endpoint. Can anyone point me towards what should be used if the version we are on does not support tres specifications? Best regards, Juan Puerto

2 1

Error binding slurm stream socket: Address already in use, and GPU GRES verification
by Shooktija S N 23 Jul '24

23 Jul '24

Hi, I am trying to set up Slurm with GPUs as GRES on a 3 node configuration (hostnames: server1, server2, server3). For a while everything looked fine and I was able to run srun --label --nodes=3 hostname which is what I use to test if Slurm is working correctly, and then it randomly stops. Turns out slurmctld is not working and it throws the following error (the two lines are consecutive in the log file): root@server1:/var/log# grep -i error slurmctld.log [2024-07-22T14:47:32.302] error: … [View More]Error binding slurm stream socket: Address already in use[2024-07-22T14:47:32.302] fatal: slurm_init_msg_engine_port error Address already in use This error is being thrown after having made no changes to the config files, in fact the cluster wasn't used at all for a few weeks before this error was thrown. This is the simple script I use to restart Slurm: root@server1:~# cat slurmRestart.sh #! /bin/bashscp /etc/slurm/slurm.conf server2:/etc/slurm/ && echo copied slurm.conf to server2;scp /etc/slurm/slurm.conf server3:/etc/slurm/ && echo copied slurm.conf to server3;rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld ; echo restarting slurm on server1;(ssh server2 "rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld") && echo restarting slurm on server2;(ssh server3 "rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld") && echo restarting slurm on server3; Could the error be due to the slurmd and/or slurmctld not being started in the right order? The other question I have is regarding the configuration of a GPU as a GRES - how do I verify that it has been configured correctly? I was told to use srun nvidia-smi with and without having enabled GPU use, but whether or not I enable GPU usage has no effect on the output of the command: root@server1:~# srun --nodes=1 nvidia-smi --query-gpu=uuid --format=csvuuidGPU-55f127a8-dbf4-fd12-3cad-c0d5f2dcb005root@server1:~# root@server1:~# srun --nodes=1 --gpus-per-node=1 nvidia-smi --query-gpu=uuid --format=csvuuidGPU-55f127a8-dbf4-fd12-3cad-c0d5f2dcb005 I am sceptical if about whether the GPU has properly been configured, is this the best way to check if it has? *The error:* I first noticed this happening when I tried to run the command I usually use to see if everything is fine, the srun command runs only one node, and the only way to stop it if I specify the number of nodes as 3 is to press Ctrl+C: root@server1:~# srun --label --nodes=1 hostname0: server1root@server1:~# ssh server2 "srun --label --nodes=1 hostname"0: server1root@server1:~# ssh server3 "srun --label --nodes=1 hostname"0: server1root@server1:~# srun --label --nodes=3 hostnamesrun: Required node not available (down, drained or reserved)srun: job 265 queued and waiting for resources^Csrun: Job allocation 265 has been revokedsrun: Force Terminated JobId=265root@server1:~# ssh server2 "srun --label --nodes=3 hostname"srun: Required node not available (down, drained or reserved)srun: job 266 queued and waiting for resources^Croot@server1:~# ssh server3 "srun --label --nodes=3 hostname"srun: Required node not available (down, drained or reserved)srun: job 267 queued and waiting for resourcesroot@server1:~# *The logs:* 1) The last 30 lines of */var/log/slurmctld.log* at the debug5 level in server #1 (pastebin to the entire log <https://pastebin.com/fw4C4xtr>): root@server1:/var/log# tail -30 slurmctld.log [2024-07-22T14:47:32.301] debug: Updating partition uid access list[2024-07-22T14:47:32.301] debug3: create_mmap_buf: loaded file `/var/spool/slurmctld/resv_state` as buf_t[2024-07-22T14:47:32.301] debug3: Version string in resv_state header is PROTOCOL_VERSION[2024-07-22T14:47:32.301] Recovered state of 0 reservations[2024-07-22T14:47:32.301] debug3: create_mmap_buf: loaded file `/var/spool/slurmctld/trigger_state` as buf_t[2024-07-22T14:47:32.301] State of 0 triggers recovered[2024-07-22T14:47:32.301] read_slurm_conf: backup_controller not specified[2024-07-22T14:47:32.301] select/cons_tres: select_p_reconfigure: select/cons_tres: reconfigure[2024-07-22T14:47:32.301] select/cons_tres: part_data_create_array: select/cons_tres: preparing for 1 partitions[2024-07-22T14:47:32.301] debug: power_save module disabled, SuspendTime < 0[2024-07-22T14:47:32.301] Running as primary controller[2024-07-22T14:47:32.301] debug: No backup controllers, not launching heartbeat.[2024-07-22T14:47:32.301] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/priority_basic.so[2024-07-22T14:47:32.301] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Priority BASIC plugin type:priority/basic version:0x160508[2024-07-22T14:47:32.301] debug: priority/basic: init: Priority BASIC plugin loaded[2024-07-22T14:47:32.301] debug3: Success.[2024-07-22T14:47:32.301] No parameter for mcs plugin, default values set[2024-07-22T14:47:32.301] mcs: MCSParameters = (null). ondemand set.[2024-07-22T14:47:32.301] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/mcs_none.so[2024-07-22T14:47:32.301] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:mcs none plugin type:mcs/none version:0x160508[2024-07-22T14:47:32.301] debug: mcs/none: init: mcs none plugin loaded[2024-07-22T14:47:32.301] debug3: Success.[2024-07-22T14:47:32.302] debug3: _slurmctld_rpc_mgr pid = 3159324[2024-07-22T14:47:32.302] debug3: _slurmctld_background pid = 3159324[2024-07-22T14:47:32.302] error: Error binding slurm stream socket: Address already in use[2024-07-22T14:47:32.302] fatal: slurm_init_msg_engine_port error Address already in use[2024-07-22T14:47:32.304] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.304] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.304] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.304] slurmscriptd: debug: _slurmscriptd_mainloop: finished 2) Entirety of *slurmctld.log on server #2*: root@server2:/var/log# cat slurmctld.log [2024-07-22T14:47:32.614] debug: slurmctld log levels: stderr=debug5 logfile=debug5 syslog=quiet[2024-07-22T14:47:32.614] debug: Log file re-opened[2024-07-22T14:47:32.615] slurmscriptd: debug: slurmscriptd: Got ack from slurmctld, initialization successful[2024-07-22T14:47:32.615] slurmscriptd: debug: _slurmscriptd_mainloop: started[2024-07-22T14:47:32.616] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.616] debug: slurmctld: slurmscriptd fork()'d and initialized.[2024-07-22T14:47:32.616] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.616] debug: _slurmctld_listener_thread: started listening to slurmscriptd[2024-07-22T14:47:32.616] debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.616] debug3: Called _msg_readable[2024-07-22T14:47:32.616] slurmctld version 22.05.8 started on cluster dlabcluster[2024-07-22T14:47:32.616] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/cred_munge.so[2024-07-22T14:47:32.616] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Munge credential signature plugin type:cred/munge version:0x160508[2024-07-22T14:47:32.616] cred/munge: init: Munge credential signature plugin loaded[2024-07-22T14:47:32.616] debug3: Success.[2024-07-22T14:47:32.616] error: This host (server2/server2) not a valid controller[2024-07-22T14:47:32.617] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.617] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.617] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.617] slurmscriptd: debug: _slurmscriptd_mainloop: finished 3) Entirety of *slurmctld.log on server #3*: root@server3:/var/log# cat slurmctld.log [2024-07-22T14:47:32.927] debug: slurmctld log levels: stderr=debug5 logfile=debug5 syslog=quiet[2024-07-22T14:47:32.927] debug: Log file re-opened[2024-07-22T14:47:32.928] slurmscriptd: debug: slurmscriptd: Got ack from slurmctld, initialization successful[2024-07-22T14:47:32.928] slurmscriptd: debug: _slurmscriptd_mainloop: started[2024-07-22T14:47:32.928] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.928] debug: slurmctld: slurmscriptd fork()'d and initialized.[2024-07-22T14:47:32.928] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.928] slurmctld version 22.05.8 started on cluster dlabcluster[2024-07-22T14:47:32.929] debug: _slurmctld_listener_thread: started listening to slurmscriptd[2024-07-22T14:47:32.929] debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.929] debug3: Called _msg_readable[2024-07-22T14:47:32.929] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/cred_munge.so[2024-07-22T14:47:32.929] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Munge credential signature plugin type:cred/munge version:0x160508[2024-07-22T14:47:32.929] cred/munge: init: Munge credential signature plugin loaded[2024-07-22T14:47:32.929] debug3: Success.[2024-07-22T14:47:32.929] error: This host (server3/server3) not a valid controller[2024-07-22T14:47:32.930] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.930] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.930] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.930] slurmscriptd: debug: _slurmscriptd_mainloop: finished *The config files (shared by all 3 computers):* 1) */etc/slurm/slurm.conf* without the comments: root@server1:/etc/slurm# grep -v "#" slurm.conf ClusterName=DlabClusterSlurmctldHost=server1GresTypes=gpuProctrackType=proctrack/linuxprocReturnToService=1SlurmctldPidFile=/var/run/slurmctld.pidSlurmctldPort=6817SlurmdPidFile=/var/run/slurmd.pidSlurmdPort=6818SlurmdSpoolDir=/var/spool/slurmdSlurmUser=rootStateSaveLocation=/var/spool/slurmctldTaskPlugin=task/affinity,task/cgroupInactiveLimit=0KillWait=30MinJobAge=300SlurmctldTimeout=120SlurmdTimeout=300Waittime=0SchedulerType=sched/backfillSelectType=select/cons_tresJobCompType=jobcomp/noneJobAcctGatherFrequency=30SlurmctldDebug=debug5SlurmctldLogFile=/var/log/slurmctld.logSlurmdDebug=debug5SlurmdLogFile=/var/log/slurmd.logNodeName=server[1-3] RealMemory=128636 Sockets=1 CoresPerSocket=64 ThreadsPerCore=2 State=UNKNOWN Gres=gpu:1PartitionName=mainPartition Nodes=ALL Default=YES MaxTime=INFINITE State=UP 2) */etc/slurm/gres.conf*: root@server1:/etc/slurm# cat gres.conf NodeName=server1 Name=gpu File=/dev/nvidia0NodeName=server2 Name=gpu File=/dev/nvidia0NodeName=server3 Name=gpu File=/dev/nvidia0 These files are the same on all 3 computers: root@server1:/etc/slurm# diff slurm.conf <(ssh server2 "cat /etc/slurm/slurm.conf")root@server1:/etc/slurm# diff slurm.conf <(ssh server3 "cat /etc/slurm/slurm.conf")root@server1:/etc/slurm# diff gres.conf <(ssh server2 "cat /etc/slurm/gres.conf")root@server1:/etc/slurm# diff gres.conf <(ssh server3 "cat /etc/slurm/gres.conf")root@server1:/etc/slurm# Thank you, Shookti [View Less]

1 0

Cgroup
by stth 22 Jul '24

22 Jul '24

Hello, I am configuring cgroups on my server for the first time. I've created a cgroup.conf file in the Slurm directory with the following values: ConstrainCores=yes ConstrainRAMSpace=yes ConstrainSwapSpace=yes AllowedRAMSpace=90 AllowedSwapSpace=10 I feel like this configuration might be incomplete. Can anyone provide assistance? I haven't found any specific guidance online. Thanks!

2 1

Custom Plugin Integration
by Bhaskar Chakraborty 20 Jul '24

20 Jul '24

Hello, We wish to have a schedulingintegration with Slurm. Our own application has a backend system which willdecide the placement of jobs across hosts & CPU cores. The backend takesits own time to come back with a placement (which may take a few seconds) & we expect slurm to update it regularly about any change in the current state ofavailable resources. For this we believe we have 3 options broadly: - We use the const_tres Select plugin & modify it to let it query our … [View More]

3 7

CLOUD nodes with unknown IP addresses
by Martin Lee 19 Jul '24

19 Jul '24

I've read the following in the slurm power saving docs: https://slurm.schedmd.com/power_save.html > *cloud_dns* > By default, Slurm expects that the network addresses for cloud nodes won't be known until creation of the node and that Slurm will be notified of the node's address upon registration. Since Slurm communications rely on the node configuration found in the slurm.conf, Slurm will tell the client command, after waiting for all nodes to boot, each node's IP address. However, in … [View More]

2 2

Slurm Users cannot open gui login nodes with X11 without logging into the Compute node.
by Alper AYKUT 18 Jul '24

18 Jul '24

Hello 1 Login Server I have a total of 3 calculation nodes. Especially in non-GUI jobs, I can run scripts successfully with Slurm sbatch. However, when it is with Gui, I run it with X11. However, my problem for now is this: When I run sbatch gui.sh, it runs smoothly and automatically selects the calculation node and gui is active on the login server. But the node it selects must be logged in with the same user for x11 to work. How can I run the application with gui on the login node without … [View More]

1 0

Nodes TRES double what is requested
by jack.mellor＠mbda.co.uk 12 Jul '24

12 Jul '24

Hi, We are running slurm 23.02.6. Our nodes have hyperthreading disabled and we have slurm.conf set to CPU=32 for each node (each node has 2 processes with 16 cores). When we allocated a job, such as salloc -n 32, it will allocate a whole node but using sinfo shows double the allocation in the TRES=64. It also shows in sinfo that the node has 4294967264 idle CPUs. Not sure if its a known bug, or an issue with our config? I have tried various things, like setting the sockets/boards in slurm.conf. Thanks Jack

5 4

SLURM noob administrator question
by Cutts, Tim 11 Jul '24

11 Jul '24

Still learning about SLURM, so please forgive me if I ask a naïve question I like to use Anders Halager’s gnodes command to visualise the state of our nodes. I’ve noticed lately that we fairly often see things like this (apologies for line wrap): +- core - 46 cores & 186GB -----------------------------------------+-------------------------------------------------------------------+-------------------------------------------------------------------+ | seskscpn301 0G … [View More]

2 1

2025

2024

slurm-users ----- 2025 ----- July 2025 June 2025 May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users