- slurm-users - lists.schedmd.com

Slurm hanging behavior
by Richard Yang 20 Aug '24

20 Aug '24

Hello Slurm community, We are using slurm as the system to deploy training jobs on a large gpu cluster, but encounter a strange behavior. As new comers, we wonder if this is a known behavior. Below is some more info: * We are running a relatively older version 22.0.5 * At relatively higher load, we encountered hanging. It is particularly puzzling in the following sense: assume we have nodelist1 with 6 hosts and nodelist2 with 7 hosts. We run simple ‘hostname’. Deploying on nodelist1 … [View More]

1 0

Access to --constraint=<arg> in Lua cli_filter?
by Kevin Buckley 20 Aug '24

20 Aug '24

If I supply a --constraint=<arg> option to an sbatch/salloc/srun, does the arg appear inside any object that a Lua CLI Filter could access? I've tried this basic check if is_unset(options['constraint']) then slurm_errorf('constraint is unset ') end and seen that that object is, indeed, unset. Kevin

2 2

Unable to run sequential jobs simultaneously on the same node
by Arko Roy 20 Aug '24

20 Aug '24

I want to run 50 sequential jobs (essentially 50 copies of the same code with different input parameters) on a particular node. However, as soon as one of the jobs gets executed, the other 49 jobs get killed immediately with exit code 9. The jobs are not interacting and are strictly parallel. However, if the 50 jobs run on 50 different nodes, it runs successfully. Can anyone please help with possible fixes? I see a discussion almost along the similar lines in https://groups.google.com/g/slurm-… [View More]

5 7

sreport syntax for TRES/GPU usage
by Robert Kudyba 16 Aug '24

16 Aug '24

In a 25 node heterogeneous cluster with 4 different types of GPUs, to get granular to see which GPUs were used most over a time period we have to set AccountingStorageTRES to something like: AccountingStorageTRES=gres/gpu,gres/gpu:rtx8000,gres/gpu:v100s,gres/gpu:a40,gres/gpu:a100 Unfortunately it's currently at: AccountingStorageTRES=gres/gpu At least all nodes have the same GPU within each node. What are some good options to sreport to get details on usage over a year, e.g., percentage of … [View More]

1 0

Upgrade compute node to 24.05.2
by Sid Young 15 Aug '24

15 Aug '24

G'Day all, I've been upgrading cmy cluster from 20.11.0 in small steps to get to 24.05.2. Currently 1 have all nodes on 23.02.8, the controller on 24.05.2 and a single test node on 24.05.2. All are Centos 7.9 (upgrade to Oracle Linux 8.10 is Phase 2 of the upgrades). When I check the slurmd status on the test node I get: [root@hpc-dev-01 24.05.2]# systemctl status slurmd ● slurmd.service - Slurm node daemon Loaded: loaded (/usr/lib/systemd/system/slurmd.service; enabled; vendor preset: … [View More]

2 1

Seeking Commercial SLURM Subscription Provider
by John Joseph 13 Aug '24

13 Aug '24

Dear All, Good morning. We successfully implemented a 4-node SLURM cluster with shared storage using GlusterFS and were able to run COMSOL programs on it. After this learning experience, we've determined that it would be beneficial to switch to a commercial SLURM subscription for better support. We are currently seeking a solution provider who can offer support based on a commercial subscription. I would like to reach out to the group for recommendations or advice on how we can avail these … [View More]

2 1

Annoying canonical question about converting SLURM_JOB_NODELIST to a host list for mpirun
by Jeffrey Layton 12 Aug '24

12 Aug '24

Good afternoon, I know this question has been asked a million times, but what is the canonical way to convert the list of nodes for a job that is container in a Slurm variable, I use SLURM_JOB_NODELIST, to a host list appropriate for mpirun in OpenMPI (perhaps MPICH as well)? Before anyone says, compile OpenMPI with Slurm, I can't change the Slurm installation. I have a script that does the conversion on a single node, but when I try a cluster that does not include the single node, I get an … [View More]

3 8

FairShare if there's only one account?
by Drucker, Daniel 10 Aug '24

10 Aug '24

Simple question: Does FairShare still work if every user is under one account? E.g.: $ sacctmgr show assoc format=Account,User Account User ---------- ---------- root root root mic mic asmith mic bsmith mic csmith mic djones mic ejones mic frubble Will it divide time up fairly between the users? I have: PriorityType=priority/multifactor PriorityFavorSmall=YES PriorityWeightAge=50000 … [View More]

5 31

Jobs distribution over CPUs
by Rafał Lalik 09 Aug '24

09 Aug '24

Hi, I have a very simple computing farm on a single PC with AMD Ryzen 7950X (2x16 cores). I have configured my slurm to use up to 25 CPUs: NodeName=palmer CPUs=25 RealMemory=40000 State=UNKNOWN # Boards=1 SocketsPerBoard=1 CoresPerSocket=16 ThreadsPerCore=2 PartitionName=main Nodes=ALL Default=YES MaxTime=INFINITE State=UP But using htop I see that with all 25 jobs running I use max 16 cores. It seems that like * 6 jobs are using 100% of CPU * 20 jobs use 50% CPU each I use slurm 24.… [View More]

1 0

The issue in the distribution of job
by Sundaram Kumaran 09 Aug '24

09 Aug '24

Dear All, May I have your suggestion in my issue facing, While the job is launched using "salloc -N4--mem 4000 -p active" I find the job is running in the one compute node and the other 3 machines are free, I don`t find the job is distributed evenly, May I have your suggestion, I do squeue /scontrol to find the job distribution and it displays the 4 machines but when I check on the respective machines I don`t find the job running only one machine takes the whole node, Is there any issue in my … [View More]

2 1

2025

2024

slurm-users

2025

2024

slurm-users ----- 2025 ----- July 2025 June 2025 May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users