- slurm-users - lists.schedmd.com

Discrepancy in GPU Hour Reporting Between sacct and sreport in SLURM
by Manisha Yadav 11 Nov '24

11 Nov '24

I am trying to find the GPU hour utilization for a user during a specific time period using the sacct and sreport commands. However, I am noticing a significant difference between the outputs of these two commands. Could you explain the reasons for this discrepancy? Are there specific factors or configurations in SLURM that could lead to variations in the reported GPU hours? There is a significant discrepancy in the results produced for GPU hour utilization by the sacct and sreport commands in SLURM Thanks, Manisha ------------------------------------------------------------------------------------------------------------ [ C-DAC is on Social-Media too. Kindly follow us at: Facebook: https://www.facebook.com/CDACINDIA & Twitter: @cdacindia ] This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. ------------------------------------------------------------------------------------------------------------

1 0

Access denied by pam_slurm_adopt
by John Hearns 10 Nov '24

10 Nov '24

I have cluster which uses Slurm 23.11.6 When I submit a multi-node job and run something like clush -b -w $SLURM_JOB_NODELIST "date" very often the ssh command fails with: Access denied by pam_slurm_adopt: you have no active jobs on this node This will happen maybe on 50% of the nodes There is the same behaviour of I salloc a number of nodes then try to ssh to a node. I have traced this to slurmstepd spawning a long sleep, which I believe allows proctrackd to 'see' if a job is active. On nodes that I can ssh into: root 3211 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmd --systemd root 3227 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmstepd infinity root 24322 1 0 15:40 ? 00:00:00 slurmstepd: [15709.extern] root 24326 24322 0 15:40 ? 00:00:00 \_ sleep 100000000 On nodes where I cannot ssh: root 3226 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmd --systemd root 3258 1 0 Nov08 ? 00:00:00 /usr/sbin/slurmstepd infinity Maybe I am not understanding something here? ps. I ahve tried to run the pam_slurm_adopt module with options to debug, and have not found anything useful John H

2 2

Change primary alloc node
by Bhaskar Chakraborty 04 Nov '24

04 Nov '24

Hi, Is there a way to change/control the primary node (i.e. where the initial task starts) as part of a job's allocation. For eg, if a job requires 6 CPUs & its allocation is distributed over 3 hosts h1, h2 & h3 I find that it always starts the task in 1 particularnode (say h1) irrespective of how many slots were available in the hosts. Can we somehow let slurm have the primary node as h2? Is there any C-API inside select plugin which can do this trick if we were to control it through the configured select plugin? Thanks.-Bhaskar.

2 4

Slurm Job Sched Priority
by Bhaskar Chakraborty 03 Nov '24

03 Nov '24

Hello, Is there any DS in slurmctld which portrays the dynamic relative priority of pending jobs? We are trying to use slurm for developing a scheduling solution and 1 of the problems we face at the outset is how to determinethe order of scheduling for pending jobs. One option is to find scheduling iteration window begin & close pointers & cache the job ids as seen in order & then make them the priority order at that point of time. ( This means for 500 pending jobs, say, if we can find which are the slurmctld calls which mark the beginning & end of a sched iteration then we can use the scheduling orderof jobs as the relative priority order for that period of time, of course it may change depending on fairshare, user initiated priority modification etc. ) A concrete existing data structure showing the dynamic priority itself from slurmctld would be handy. Help appreciated. Thanks! Bhaskar.

3 4

Re: Change primary alloc node
by Bhaskar Chakraborty 31 Oct '24

31 Oct '24

Hello, Just to add some context here. We plan to use slurm for developing a sched solution which interacts with a backend system. Now, the backend system has pieces of h/w which require specific host in the allocation to be the primary/master host wherein the initial task would be launched, this in turn is driven by the job's placement orientation on the h/w itself. So, our primary task should launch in the asked primary host while secondary / remote tasks would subsequently get started on other hosts. Hope this brings some context to the problem as to why a specific host is necessary to be the starting host. Regards,Bhaskar. On Thursday 31 October, 2024 at 12:04:37 am IST, Laura Hild <lsh(a)jlab.org> wrote: I think if you tell the list why you care which of the Nodes is BatchHost, they may be able to provide you with a better solution. ________________________________________ Od: Bhaskar Chakraborty via slurm-users <slurm-users(a)lists.schedmd.com> Poslano: sreda, 30. oktober 2024 12:35 Za: slurm-users(a)schedmd.com Zadeva: [slurm-users] Change primary alloc node Hi, Is there a way to change/control the primary node (i.e. where the initial task starts) as part of a job's allocation. For eg, if a job requires 6 CPUs & its allocation is distributed over 3 hosts h1, h2 & h3 I find that it always starts the task in 1 particular node (say h1) irrespective of how many slots were available in the hosts. Can we somehow let slurm have the primary node as h2? Is there any C-API inside select plugin which can do this trick if we were to control it through the configured select plugin? Thanks. -Bhaskar.

3 2

Why AllowAccounts not work in slurm-23.11.6
by daijiangkuicgo＠gmail.com 30 Oct '24

30 Oct '24

I have set AllowAccounts=sunlabc5hpc,root, but it doesn’t seem to work. User c010637 is not part of the sunlabc5hpc account but is still able to use the sunlabc5hpc partition. I have tried setting EnforcePartLimits to ALL, ANY, and NO, but none of these options resolved the issue. [c010637@sl-login ~]$ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST cpu* up infinite 3 mix sl-c[0035,0042-0043] cpu* up infinite 1 idle sl-c0036 gpu up infinite 3 idle sl-c[0045-0047] sunlabc5hpc up infinite 1 idle sl-c0048 [c010637@sl-login ~]$ scontrol show partition sunlabc5hpc PartitionName=sunlabc5hpc AllowGroups=ALL AllowAccounts=sunlabc5hpc,root AllowQos=ALL AllocNodes=ALL Default=NO QoS=N/A DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=UNLIMITED MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED MaxCPUsPerSocket=UNLIMITED Nodes=sl-c0048 PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=OFF State=UP TotalCPUs=256 TotalNodes=1 SelectTypeParameters=NONE JobDefaults=(null) DefMemPerNode=UNLIMITED MaxMemPerNode=UNLIMITED TRES=cpu=256,mem=515000M,node=1,billing=256,gres/gpu=8 [c010637@sl-login ~]$ sacctmgr list assoc format=cluster,user,account%20,qos user=$USER Cluster User Account QOS ---------- ---------- -------------------- -------------------- snowhpc c010637 c010637_bank normal [c010637@sl-login ~]$ sacctmgr list account sunlabc5hpc Account Descr Org ---------- -------------------- -------------------- sunlabc5h+ sunlabc5hpc sunlabc5hpc [c010637@sl-login ~]$ sacctmgr show assoc where Account=sunlabc5hpc format=User,Account User Account ---------- ---------- sunlabc5h+ c010751 sunlabc5h+ snowdai sunlabc5h+

5 9

Re: 转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5?
by taleintervenor＠sjtu.edu.cn 29 Oct '24

29 Oct '24

Thanks for all your help. So it seems we can skip the trouble of compiling SLURM over different mariadb versions. Tianyang Zhang SJTU Network Information Center 发件人: Sid Young <sid.young(a)gmail.com> 发送时间: 2024年10月30日 7:19 收件人: Andrej Sec <andrej.sec(a)savba.sk> 抄送: taleintervenor(a)sjtu.edu.cn; slurm-users(a)lists.schedmd.com 主题: Re: [slurm-users] Re: 转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5? I recently upgraded from 20.11 to 24.05.2, before moving the cluster from CentOS 7.9 to Oracle Linux 8.10 The DB upgrade should be pretty simple, do a mysqldump first, then uninstall the old DB, change the repo's and install the new DB version. It should recognise the DB files on disk and access them. Do another DB backup on the new DB version. then roll through the Slurm upgrades. I picked the first and last version of each release, and systematically went through each node till it was done. First the slurm controller node, then the compute nodes. To avoid Job loss, drain the nodes or you end up with a situation where the slurmd can't talk to the running slurmstepd and the job(s) gets lost. (Shows as a "Protocol Error"). Ole sent me a link to this guide which mostly worked. https://wiki.fysik.dtu.dk/Niflheim_system/Slurm_installation/#upgrade-slurm… Sid Young W: https://off-grid-engineering.com On Tue, Oct 29, 2024 at 6:33 PM Andrej Sec via slurm-users <slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> > wrote: Hi, we are facing a similar task. We have a Slurm 22.05 / MariaDB 5.5.68 environment and want to upgrade to a newer version. According to the documentation, it’s recommended to upgrade from 22.05 to a maximum of 23.11 in one step. With the MariaDB upgrade, there’s a challenge between 10.1 and 10.2+ due to incompatible changes (https://mariadb.com/kb/en/changes-improvements-in-mariadb-10-2). This upgrade, as I understand from the documentation, requires at least slurm 22.05, where it is automatically handled by the slurmdbd service. In the test lab, we performed the following tests: a. Incremental upgrade - according to MariaDB recommendations: 1. Upgrade MariaDB 5.5.68 -> 10.1.48 -> 10.2.44 2. Start the Slurm suite 22.05, checking content after each MariaDB upgrade step. During the 10.1 -> 10.2 upgrade, the slurmdbd service automatically converted the database to the required format. We had enabled general.log in MariaDB, allowing detailed inspection of database changes during conversion. 3. Upgrade slurmdbd to version 23.11 4. Upgrade slurmctld to version 23.11 5. Upgrade slurmd to version 23.11 6. Check the database content and compare tests before and after the upgrade (we used various reports with scontrol, sreport, sacct, sacctmgr for verification). b. Direct MariaDB upgrade from 5.5.68 to 10.2.44 using the same approach. According to the tests, this resulted in the same state as the incremental approach. PS: If you proceed with the upgrade, I would appreciate it if you could let us know about any potential challenges you encountered. Andrej Sec nscc, Bratislava, Slovakia _____ Od: "hermes via slurm-users" <slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> > Komu: slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> Odoslané: pondelok, 28. október 2024 8:48:19 Predmet: [slurm-users] =?eucgb2312_cn?q?=D7=AA=B7=A2=3A_What_is_the_safe_upgrade_path_when_upgrade_from_slurm21=2E08_and_mariadb5=2E5=3F?= Hi everyone: We are currently running business on SLURM21.08 and mariadb5.5. When talking about the upgrade, we need to keep all the users and jobs history data. And we see the official document wrote: “When upgrading an existing accounting database to MariaDB 10.2.1 or later from an older version of MariaDB or any version of MySQL, ensure you are running slurmdbd 22.05.7 or later. These versions will gracefully handle changes to MariaDB default values that can cause problems for slurmdbd.” So is this mean we have to firstly build SLURM>22.05 over mariadb5.5, and do the SLURM upgrade. Then upgrade the mariadb to newer version, and rebuild the same version of SLURM over new mariadb-devel? And is it safe to jump directly from mariadb5.5 to latest version? How can we check whether the slurm have correctly inherited the historical data? Thanks, Tianyang Zhang SJTU Network Information Center -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com <mailto:slurm-users-leave@lists.schedmd.com> -- slurm-users mailing list -- slurm-users(a)lists.schedmd.com <mailto:slurm-users@lists.schedmd.com> To unsubscribe send an email to slurm-users-leave(a)lists.schedmd.com <mailto:slurm-users-leave@lists.schedmd.com>

1 0

转发: What is the safe upgrade path when upgrade from slurm21.08 and mariadb5.5?
by taleintervenor＠sjtu.edu.cn 29 Oct '24

29 Oct '24

Hi everyone: We are currently running business on SLURM21.08 and mariadb5.5. When talking about the upgrade, we need to keep all the users and jobs history data. And we see the official document wrote: “When upgrading an existing accounting database to MariaDB 10.2.1 or later from an older version of MariaDB or any version of MySQL, ensure you are running slurmdbd 22.05.7 or later. These versions will gracefully handle changes to MariaDB default values that can cause problems for slurmdbd.” So is this mean we have to firstly build SLURM>22.05 over mariadb5.5, and do the SLURM upgrade. Then upgrade the mariadb to newer version, and rebuild the same version of SLURM over new mariadb-devel? And is it safe to jump directly from mariadb5.5 to latest version? How can we check whether the slurm have correctly inherited the historical data? Thanks, Tianyang Zhang SJTU Network Information Center

3 2

Job pre / post submit scripts
by Bhaskar Chakraborty 29 Oct '24

29 Oct '24

Hi, Is there an option in slurm to launch a custom script at the time of job submission through sbatchor salloc? The script should run with submit user permission in submit area. The idea is that we need to enquire something which characterises our job’s requirement like CPUslots, memory etc from a central server and we do need read access to user area prior to that. In our use case the user doesn’t necessarily know beforehand what kind of resource his job needs.(Hence, the need for such a script which will contact the server with user area info.) Based on it we can modify the job a little later. A post submit script, if available, would inform us the slurm job id as well, it would get called just after the job has entered the system and prior to its scheduling. Thanks,Bhaskar. Sent from Yahoo Mail for iPad

4 4

Scheduling oddity with multiple GPU types in same partition
by Kevin M. Hildebrand 29 Oct '24

29 Oct '24

We have a 'gpu' partition with 30 or so nodes, some with A100s, some with H100s, and a few others. It appears that when (for example) all of the A100 GPUs are in use, if there are additional jobs requesting A100 GPUs pending, and those jobs have the highest priority in the partition, then jobs submitted for H100s won't run even if there are idle H100s. This is a small subset of our present pending queue- the four bottom jobs should be running, but aren't. The top pending job shows reason 'Resources' while the rest all show 'Priority'. Any thoughts on why this might be happening? JOBID PRIORITY TRES_ALLOC 8317749 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317750 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317745 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8317746 501490 cpu=4,mem=80000M,node=1,billing=48,gres/gpu=1,gres/gpu:a100=1 8338679 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338678 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338677 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 8338676 500060 cpu=4,mem=64G,node=1,billing=144,gres/gpu=1,gres/gpu:h100=1 Thanks, Kevin -- Kevin Hildebrand University of Maryland Division of IT

2 1

2024

slurm-users ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users