July 2024 - slurm-users - lists.schedmd.com

job_container/tmpfs and srun.
by Phill Harvey-Smith 17 Jan '25

17 Jan '25

Hi all, On our setup we are using job_container/tmpfs to give each job it's own temp space. Since our compute nodes have reasonably sized disks for tasks that do a lot of disk I/O on user's data we have asked users to copy their data to the local disk at the beginning of the task and (if needed) copy it back at the end. This saves lots of NFS thrashing slowing down both the task and the NFS servers. However some of our users are having problems with this, their initial sbatch script … [View More]

2 1

Why AllowAccounts not work in slurm-23.11.6
by daijiangkuicgo＠gmail.com 30 Oct '24

30 Oct '24

I have set AllowAccounts=sunlabc5hpc,root, but it doesn’t seem to work. User c010637 is not part of the sunlabc5hpc account but is still able to use the sunlabc5hpc partition. I have tried setting EnforcePartLimits to ALL, ANY, and NO, but none of these options resolved the issue. [c010637@sl-login ~]$ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST cpu* up infinite 3 mix sl-c[0035,0042-0043] cpu* up infinite 1 idle sl-c0036 gpu up … [View More]

5 9

AllowAccounts partition setting
by Marko Markoc 16 Oct '24

16 Oct '24

Hi All, At one point, when we were running slurm 22, we set up a few new partitions with `AllowAccounts` setting enabled. We limit access to these partitions only to a few accounts. We manually create these accounts and users using the `sacctmgr` command. At that time, everything was working. Only users in these accounts were able to run jobs in that partition. Few months ago we upgraded slurm to 23.02.7 but just a couple of days ago we noticed that anyone could submit jobs to these partitions.… [View More]

6 8

Slurmctld process error 'double free or corruption' on RHEL 9 (Rocky Linux)
by William VINCENT 07 Oct '24

07 Oct '24

Hello I am writing to report an issue with the Slurmctld process on our RHEL 9 (Rocky Linux) . Twice in the past 5 days, the Slurmctld process has encountered an error that resulted in the service stopping. The error message displayed was "double free or corruption (out)". This error has caused significant disruption to our jobs, and we are concerned about its recurrence. We have tried troubleshooting the issue, but we have not been able to identify the root cause of the problem. We … [View More]would appreciate any assistance or guidance you can provide to help us resolve this issue. Please let us know if you need any additional information or if there are any specific steps we should take to diagnose the problem further. Thank you for your attention to this matter. Best regards, _________________________ Jul 09 22:12:01 admin slurmctld[711010]: double free or corruption (fasttop) Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 09 22:12:01 admin systemd[1]: slurmctld.service: Consumed 11min 26.451s CPU time. ..... Jul 14 10:15:01 admin slurmctld[1633720]: double free or corruption (out) Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Main process exited, code=killed, status=6/ABRT Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Failed with result 'signal'. Jul 14 10:15:02 admin systemd[1]: slurmctld.service: Consumed 7min 27.596s CPU time. _________________________ slurmctld -V slurm 22.05.9 ________________________ cat /etc/slurm/slurm.conf |grep -v '#' ClusterName=xxx SlurmctldHost=admin SlurmctldParameters=enable_configless SlurmUser=slurm AuthType=auth/munge CryptoType=crypto/munge SlurmctldPort=6817 StateSaveLocation=/var/spool/slurmctld SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmctldDebug=verbose DebugFlags=NO_CONF_HASH SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmdLogFile=/var/log/slurm/slurmd.log SlurmdDebug=verbose SchedulerType=sched/backfill SelectType=select/cons_tres SelectTypeParameters=CR_Core,CR_LLN DefMemPerCPU=1024 MaxMemPerCPU=4096 GresTypes=gpu ProctrackType=proctrack/cgroup JobAcctGatherType=jobacct_gather/cgroup JobAcctGatherFrequency=15 JobCompType=jobcomp/none TaskPlugin=task/cgroup LaunchParameters=use_interactive_step AccountingStorageType=accounting_storage/slurmdbd AccountingStorageHost=admin AccountingStoragePort=6819 AccountingStorageEnforce=associations AccountingStorageTRES=gres/gpu MailProg=/usr/bin/mailx EnforcePartLimits=YES MaxArraySize=200000 MaxJobCount=500000 MpiDefault=none ReturnToService=2 SwitchType=switch/none TmpFS=/tmpslurm/ UsePAM=1 InactiveLimit=0 KillWait=30 MessageTimeout=30 MinJobAge=300 SlurmctldTimeout=120 SlurmdTimeout=300 Waittime=0 PriorityType=priority/multifactor PriorityFlags=FAIR_TREE,MAX_TRES PriorityDecayHalfLife=1-0 PriorityWeightFairshare=10000 NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=2 Sockets=2 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=1700 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=xxx NodeHostname=xxx CPUs=4 Sockets=4 RealMemory=3500 TmpDisk=1 CoresPerSocket=1 ThreadsPerCore=1 State=DRAIN NodeName=r9nc-24-[1-12] NodeHostname=r9nc-24-[1-12] Sockets=2 CoresPerSocket=12 ThreadsPerCore=1 CPUs=24 RealMemory=180000 State=UNKNOWN NodeName=r9nc-48-[1-4] NodeHostname=r9nc-48-[1-4] Sockets=2 CoresPerSocket=24 ThreadsPerCore=1 CPUs=48 RealMemory=480000 State=UNKNOWN NodeName=r9ng-1080-[1-7] NodeHostname=r9ng-1080-[1-7] Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=180000 State=UNKNOWN Gres=gpu:1080ti:4 NodeName=r9ng-1080-8 NodeHostname=r9ng-1080-8 Sockets=2 CoresPerSocket=10 ThreadsPerCore=1 CPUs=20 RealMemory=176687 State=UNKNOWN Gres=gpu:1080ti:1 PartitionName=24CPUNodes Nodes=r9nc-24-[1-12] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=7500 DefMemPerCPU=7500 TRESBillingWeights="CPU=1.0,Mem=0.125G" Default=YES PartitionName=48CPUNodes Nodes=r9nc-48-[1-4] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=10000 DefMemPerCPU=8000 TRESBillingWeights="CPU=1.0,Mem=0.125G" PartitionName=GPUNodes Nodes=r9ng-1080-[1-7] State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 PartitionName=GPUNodes1080-dev Nodes=r9ng-1080-8 State=UP MaxTime=UNLIMITED OverSubscribe=NO MaxMemPerCPU=9000 DefMemPerCPU=9000 Hidden=Yes _________________________ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST 24CPUNodes* up infinite 12 idle r9nc-24-[1-12] 48CPUNodes up infinite 2 idle r9nc-48-[1-2] GPUNodes up infinite 4 idle r9ng-1080-[4-7] GPUNodes1080-dev up infinite 1 idle r9ng-1080-8 -- William VINCENT Administrateur systèmes et réseaux [View Less]

4 15

Job Step State
by Emyr James 01 Oct '24

01 Oct '24

Dear all, I am working on a script to take completed job accounting data from the slurm accounting database and insert the equivalent data into a clickhouse table for fast reporting I can see that all the information is included in the cluster_job_table and cluster_job_step_table which seem to be joined on job_db_inx To get the cpu usage and peak memory usage etc. I can see that I need to parse the tres columns in the job steps. I couldn't find any column called MaxRSS in the database even … [View More]

2 2

Can't schedule on cloud node: State=IDLE+CLOUD+POWERED_DOWN+NOT_RESPONDING
by Xaver Stiensmeier 20 Sep '24

20 Sep '24

Dear slurm-user list, I have a cloud node that is powered up and down on demand. Rarely it can happen that slurm's resumeTimeout is reached and the node is therefore powered down. We have set ReturnToService=2 in order to avoid the node being marked down, because the instance behind that node is created on demand and therefore after a failure nothing stops the system to start the node again as it is a different instance. I thought this would be enough, but apparently the node is still marked … [View More]

2 3

_refresh_assoc_mgr_qos_list: no new list given back keeping cached one
by joao.damas＠syngenta.com 05 Aug '24

05 Aug '24

Hi all, We are doing a simple setup for a Slurm cluster (version 23.11.6). We follow the documentation and we are trying a setup still without accounting or slurmdbd. The slurm.conf is really simple: ``` ClusterName=Develop SlurmctldHost=head # Slurm configuration AuthType=auth/munge CryptoType=crypto/munge SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmctldPidFile=/var/run/slurmctld.pid SlurmctldPort=6817 SlurmdLogFile=/var/log/slurm/slurmd.log SlurmdPidFile=/var/run/slurmd.pid … [View More]

4 3

problem with squeue --json with version 24.05.1
by Markus Köberl 05 Aug '24

05 Aug '24

$ squeue --version slurm 24.05.1 $ squeue --json malloc(): invalid size (unsorted) Aborted forcing an older data_parser version works: $ squeue --json=v0.0.40 regards Markus Köberl -- Markus Koeberl Graz University of Technology Signal Processing and Speech Communication Laboratory E-mail: markus.koeberl(a)tugraz.at

4 5

slumrestd 24.05.1: crashes when GET on /slurm/v0.0.41/nodes : unsorted double linked list corrupted
by Josef Dvořáček 01 Aug '24

01 Aug '24

Isn't this failure familiar to anyone? When I ask API endpoint "localhost:6820/slurm/v0.0.41/jobs", slurmrestd segrafults with unsorted double linked list corrupted. Anyone using this API endpoint without segfaulting? I do the get using curl: curl --header X-SLURM-USER-NAME:root --header X-SLURM-USER-TOKEN:$SLURM_JWT -G localhost:6820/slurm/v0.0.41/jobs In comparison, curl --header X-SLURM-USER-NAME:root --header X-SLURM-USER-TOKEN:$SLURM_JWT -G localhost:6820/slurm/v0.0.41/nodes Works … [View More]well. josef čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug: _on_url: [[localhost]:52909] url path: /slurm/v0.0.41/jobs query: (null) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: operations_router: [[localhost]:52909] GET /slurm/v0.0.41/jobs čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: slurmrestd: operations_router: [[localhost]:52909] GET /slurm/v0.0.41/jobs čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: slurmrestd: rest_auth/jwt: slurm_rest_auth_p_authenticate: [[localhost]:52909] attempting user_name root token authentication pass through čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: rest_auth/jwt: slurm_rest_auth_p_authenticate: [[localhost]:52909] attempting user_name root token authentication pass through čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: skip non-matching subdirectories: registered=1 requested=3 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["openapi.json"](0, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: skip non-matching subdirectories: registered=1 requested=3 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["openapi.yaml"](1, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: skip non-matching subdirectories: registered=1 requested=3 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["openapi"](2, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: skip non-matching subdirectories: registered=2 requested=3 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["openapi","v3"](3, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match shares to jobs: FAILURE čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed shares čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","shares"](4, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match reconfigure to jobs: FAILURE čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed reconfigure čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","reconfigure"](5, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match diag to jobs: FAILURE čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed diag čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","diag"](6, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match ping to jobs: FAILURE čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed ping čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","ping"](7, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match licenses to jobs: FAILURE čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed licenses čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","licenses"](8, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: method skip for ["slurm","v0.0.41","job","submit"](9, GET != POST) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","job","submit"](9, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: method skip for ["slurm","v0.0.41","job","allocate"](10, GET != POST) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match failed for ["slurm","v0.0.41","job","allocate"](10, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match slurm to slurm: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match v0.0.41 to v0.0.41: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path: string attempt match jobs to jobs: SUCCESS čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _match_path_from_data: match successful for ["slurm","v0.0.41","jobs"](11, GET) to ["slurm","v0.0.41","jobs"](0x7F9C64001CB0) čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: operations_router: [[localhost]:52909] found callback handler: (0x0) callback_tag=0 path=/slurm/v0.0.41/jobs parser=data_parser/v0.0.41 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: _resolve_mime: [[localhost]:52909] did not provide a known content type header. Assuming URL encoded. čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug5: _parse_http_accept_entry: found */* with q=1.000000 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: _resolve_mime: [[localhost]:52909] accepts */* with q=1.000000 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: _resolve_mime: [[localhost]:52909] found accepts */*=application/json with q=1.000000 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug3: _resolve_mime: [[localhost]:52909] mime read: application/x-www-form-urlencoded write: application/json čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug3: _call_handler: [[localhost]:52909] BEGIN: calling ctxt handler: 0x7F9C9D294A36[0] for path: /slurm/v0.0.41/jobs čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug: wrap_openapi_ctxt_callback: [[localhost]:52909] GET using data_parser/v0.0.41 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: xsignal: Swap signal PIPE[13] to 0x1 from 0x408376 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: xsignal: Swap signal PIPE[13] to 0x408376 from 0x1 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug: accounting_storage/slurmdbd: _connect_dbd_conn: Sent PersistInit msg čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: xsignal: Swap signal PIPE[13] to 0x1 from 0x408376 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: debug4: xsignal: Swap signal PIPE[13] to 0x408376 from 0x1 čec 24 14:37:55 slurmserver2.koios.lan slurmrestd[1502900]: malloc(): unsorted double linked list corrupted čec 24 14:37:55 slurmserver2.koios.lan systemd[1]: Started Process Core Dump (PID 1502951/UID 0). [View Less]

2 3

Slurm versions 24.05.2, 23.11.9, and 23.02.8 are now available (security fix for switch plugins)
by Tim Wickberg 31 Jul '24

31 Jul '24

Slurm versions 24.05.2, 23.11.9, and 23.02.8 are now available and include a fix for a recently discovered security issue with the switch plugins. SchedMD customers were informed on July 17th and provided a patch on request; this process is documented in our security policy. [1] For the switch/hpe_slingshot and switch/nvidia_imex plugins, a user could override the isolation between Slingshot VNIs or IMEX channels. If you do not have one of these switch plugins configured, then you are … [View More]not impacted by this issue. It is unclear what, if any, information could be accessed with access to an unauthorized channel. This disclosure is being made out of an abundance of caution. If you do have one of these plugins enabled, the slurmctld must be restarted before the slurmd daemons to avoid disruption. Downloads are available at https://www.schedmd.com/downloads.php . Release notes follow below. - Tim [1] https://www.schedmd.com/security-policy/ -- Tim Wickberg Chief Technology Officer, SchedMD LLC Commercial Slurm Development and Support > * Changes in Slurm 24.05.2 > ========================== > -- Fix energy gathering rpc counter underflow in _rpc_acct_gather_energy when > more than 10 threads try to get energy at the same time. This prevented > the possibility to get energy from slurmd by any step until slurmd was > restarted, so losing energy accounting metrics in the node. > -- accounting_storage/mysql - Fix issue where new user with wckey did not > have a default wckey sent to the slurmctld. > -- slurmrestd - Prevent slurmrestd segfault when handling the following > endpoints when none of the optional parameters are specified: > 'DELETE /slurm/v0.0.40/jobs' > 'DELETE /slurm/v0.0.41/jobs' > 'GET /slurm/v0.0.40/shares' > 'GET /slurm/v0.0.41/shares' > 'GET /slurmdb/v0.0.40/instance' > 'GET /slurmdb/v0.0.41/instance' > 'GET /slurmdb/v0.0.40/instances' > 'GET /slurmdb/v0.0.41/instances' > 'POST /slurm/v0.0.40/job/{job_id}' > 'POST /slurm/v0.0.41/job/{job_id}' > -- Fix IPMI energy gathering when no IPMIPowerSensors are specified in > acct_gather.conf. This situation resulted in an accounted energy of 0 > for job steps. > -- Fix a minor memory leak in slurmctld when updating a job dependency. > -- scontrol,squeue - Fix regression that caused incorrect values for > multisocket nodes at '.jobs[].job_resources.nodes.allocation' for > 'scontrol show jobs --(json|yaml)' and 'squeue --(json|yaml)'. > -- slurmrestd - Fix regression that caused incorrect values for > multisocket nodes at '.jobs[].job_resources.nodes.allocation' to be dumped > with endpoints: > 'GET /slurm/v0.0.41/job/{job_id}' > 'GET /slurm/v0.0.41/jobs' > -- jobcomp/filetxt - Fix truncation of job record lines > 1024 characters. > -- Fixed regression that prevented compilation on FreeBSD hosts. > -- switch/hpe_slingshot - Drain node on failure to delete CXI services. > -- Fix a performance regression from 23.11.0 in cpu frequency handling when no > CpuFreqDef is defined. > -- Fix one-task-per-sharing not working across multiple nodes. > -- Fix inconsistent number of cpus when creating a reservation using the > TRESPerNode option. > -- data_parser/v0.0.40+ - Fix job state parsing which could break filtering. > -- Prevent cpus-per-task to be modified in jobs where a -c value has been > explicitly specified and the requested memory constraints implicitly > increase the number of CPUs to allocate. > -- slurmrestd - Fix regression where args '-s v0.0.39,dbv0.0.39' and > '-d v0.0.39' would result in 'GET /openapi/v3' not registering as a valid > possible query resulting in 404 errors. > -- slurmrestd - Fix memory leak for dbv0.0.39 jobs query which occurred if the > query parameters specified account, association, cluster, constraints, > format, groups, job_name, partition, qos, reason, reservation, state, users, > or wckey. This affects the following endpoints: > 'GET /slurmdb/v0.0.39/jobs' > -- slurmrestd - In the case the slurmdbd does not respond to a persistent > connection init message, prevent the closed fd from being used, and instead > emit an error or warning depending on if the connection was required. > -- Fix 24.05.0 regression that caused the slurmdbd not to send back an error > message if there is an error initializing a persistent connection. > -- Reduce latency of forwarded x11 packets. > -- Add "curr_dependency" (representing the current dependency of the job) > and "orig_dependency" (representing the original requested dependency of > the job) fields to the job record in job_submit.lua (for job update) and > jobcomp.lua. > -- Fix potential segfault of slurmctld configured with > SlurmctldParameters=enable_rpc_queue from happening on reconfigure. > -- Fix potential segfault of slurmctld on its shutdown when rate limitting > is enabled. > -- slurmrestd - Fix missing job environment for SLURM_JOB_NAME, > SLURM_OPEN_MODE, SLURM_JOB_DEPENDENCY, SLURM_PROFILE, SLURM_ACCTG_FREQ, > SLURM_NETWORK and SLURM_CPU_FREQ_REQ to match sbatch. > -- Add missing bash-completions dependency to slurm-smd-client debian package. > -- Fix bash-completions installation in debian pacakges. > -- Fix GRES environment variable indices being incorrect when only using a > subset of all GPUs on a node and the --gres-flags=allow-task-sharing option > -- Add missing mariadb/mysql client package dependency to debian package. > -- Fail the debian package build early if mysql cannot be found. > -- Prevent scontrol from segfaulting when requesting scontrol show reservation > --json or --yaml if there is an error retrieving reservations from the > slurmctld. > -- switch/hpe_slingshot - Fix security issue around managing VNI access. > -- switch/nvidia_imex - Fix security issue managing IMEX channel access. > -- switch/nvidia_imex - Allow for compatibility with job_container/tmpfs. > * Changes in Slurm 23.11.9 > ========================== > -- Fix many commands possibly reporting an "Unexpected Message Received" when > in reality the connection timed out. > -- Fix heterogeneous job components not being signaled with scancel --ctld and > 'DELETE slurm/v0.0.40/jobs' if the job ids are not explicitly given, > the heterogeneous job components match the given filters, and the > heterogeneous job leader does not match the given filters. > -- Fix regression from 23.02 impeding job licenses from being cleared. > -- Move error to log_flag which made _get_joules_task error to be logged to the > user when too many rpcs were queued in slurmd for gathering energy. > -- slurmrestd - Prevent a slurmrestd segfault when modifying an association > without specifying max TRES limits in the request if those TRES > limits are currently defined in the association. This affects the following > fields of endpoint 'POST /slurmdb/v0.0.38/associations/': > 'associations/max/tres/per/job' > 'associations/max/tres/per/node' > 'associations/max/tres/total' > 'associations/max/tres/minutes/per/job' > 'associations/max/tres/minutes/total' > -- Fix power_save operation after recovering from a failed reconfigure. > -- scrun - Delay shutdown until after start requested. This caused scrun > to never start or shutdown and hung forever when using --tty. > -- Fix backup slurmctld potentially not running the agent when taking over as > the primary controller. > -- Fix primary controller not running the agent when a reconfigure of the > slurmctld fails. > -- jobcomp/{elasticsearch,kafka} - Avoid sending fields with invalid date/time. > -- Fix energy gathering rpc counter underflow in _rpc_acct_gather_energy when > more than 10 threads try to get energy at the same time. This prevented > the possibility to get energy from slurmd by any step until slurmd was > restarted, so losing energy accounting metrics in the node. > -- slurmrestd - Fix memory leak for dbv0.0.39 jobs query which occurred if the > query parameters specified account, association, cluster, constraints, > format, groups, job_name, partition, qos, reason, reservation, state, users, > or wckey. This affects the following endpoints: > 'GET /slurmdb/v0.0.39/jobs' > -- switch/hpe_slingshot - Fix security issue around managing VNI access. > * Changes in Slurm 23.02.8 > ========================== > -- Fix rare deadlock when a dynamic node registers at the same time that a > once per minute background task occurs. > -- Fix assertion in developer mode on a failed message unpack. > -- switch/hpe_slingshot - Fix security issue around managing VNI access. [View Less]

1 0

slurmd error: port already in use, resulting in slaves not being able to communicate with master slurmctld
by Shooktija S N 30 Jul '24

30 Jul '24

Hi, I'm trying to set up a Slurm (version 22.05.8) cluster consisting of 3 nodes with these hostnames and local IP addresses: server1 - 10.36.17.152 server2 - 10.36.17.166 server3 - 10.36.17.132 I had scrambled together a minimum working example using these resources: https://github.com/SergioMEV/slurm-for-dummies https://blog.devops.dev/slurm-complete-guide-a-to-z-concepts-setup-and-trou… For a while everything looked fine and I was able to run the command I usually use to see if … [View More]everything is fine: srun --label --nodes=3 hostname Which used to show the expected output of the hostnames of all 3 computers, namely: server1, server2, and server3. However - after having made no changes to the configs - the command no longer works if I specify the number of nodes as anything more than 1, this behaviour is consistent on all 3 computers, the output of 'sinfo' is also included below: root@server1:~# srun --nodes=1 hostnameserver1root@server1:~# root@server1:~# srun --nodes=3 hostnamesrun: Required node not available (down, drained or reserved)srun: job 312 queued and waiting for resources^Csrun: Job allocation 312 has been revokedsrun: Force Terminated JobId=312root@server1:~# root@server1:~# ssh server2 "srun --nodes=1 hostname"server1root@server1:~# root@server1:~# ssh server2 "srun --nodes=3 hostname"srun: Required node not available (down, drained or reserved)srun: job 314 queued and waiting for resources^Croot@server1:~# root@server1:~# root@server1:~# sinfoPARTITION AVAIL TIMELIMIT NODES STATE NODELISTmainPartition* up infinite 2 down* server[2-3]mainPartition* up infinite 1 idle server1root@server1:~# Turns out, slurmctld on the master node (hostname: server1) and slurmd on the slave nodes (hostnames: server2 & server3) are throwing some errors probably related to networking: A few lines before and after the first occurence of the error in slurmctld.log on the master node - it's the only type of error I have noticed in the logs (pastebin to the entire log <https://pastebin.com/GBSWXZJR>): root@server1:/var/log# grep -B 20 -A 5 -m1 -i "error" slurmctld.log[2024-07-26T13:13:49.579] select/cons_tres: part_data_create_array: select/cons_tres: preparing for 1 partitions[2024-07-26T13:13:49.580] debug: power_save module disabled, SuspendTime < 0[2024-07-26T13:13:49.580] Running as primary controller[2024-07-26T13:13:49.580] debug: No backup controllers, not launching heartbeat.[2024-07-26T13:13:49.580] debug: priority/basic: init: Priority BASIC plugin loaded[2024-07-26T13:13:49.580] No parameter for mcs plugin, default values set[2024-07-26T13:13:49.580] mcs: MCSParameters = (null). ondemand set.[2024-07-26T13:13:49.580] debug: mcs/none: init: mcs none plugin loaded[2024-07-26T13:13:49.580] debug2: slurmctld listening on 0.0.0.0:6817[2024-07-26T13:13:52.662] debug: hash/k12: init: init: KangarooTwelve hash plugin loaded[2024-07-26T13:13:52.662] debug2: Processing RPC: MESSAGE_NODE_REGISTRATION_STATUS from UID=0[2024-07-26T13:13:52.662] debug: gres/gpu: init: loaded[2024-07-26T13:13:52.662] debug: validate_node_specs: node server1 registered with 0 jobs[2024-07-26T13:13:52.662] debug2: _slurm_rpc_node_registration complete for server1 usec=229[2024-07-26T13:13:53.586] debug: Spawning registration agent for server[2-3] 2 hosts[2024-07-26T13:13:53.586] SchedulerParameters=default_queue_depth=100,max_rpc_cnt=0,max_sched_time=2,partition_job_depth=0,sched_max_job_start=0,sched_min_interval=2[2024-07-26T13:13:53.586] debug: sched: Running job scheduler for default depth.[2024-07-26T13:13:53.586] debug2: Spawning RPC agent for msg_type REQUEST_NODE_REGISTRATION_STATUS[2024-07-26T13:13:53.587] debug2: Tree head got back 0 looking for 2[2024-07-26T13:13:53.588] debug2: _slurm_connect: failed to connect to 10.36.17.166:6818: Connection refused[2024-07-26T13:13:53.588] debug2: Error connecting slurm stream socket at 10.36.17.166:6818: Connection refused[2024-07-26T13:13:53.588] debug2: _slurm_connect: failed to connect to 10.36.17.132:6818: Connection refused[2024-07-26T13:13:53.588] debug2: Error connecting slurm stream socket at 10.36.17.132:6818: Connection refused[2024-07-26T13:13:54.588] debug2: _slurm_connect: failed to connect to 10.36.17.166:6818: Connection refused[2024-07-26T13:13:54.588] debug2: Error connecting slurm stream socket at 10.36.17.166:6818: Connection refused[2024-07-26T13:13:54.589] debug2: _slurm_connect: failed to connect to 10.36.17.132:6818: Connection refused The connections to 10.36.17.166:6818 and 10.36.17.132:6818 are refused. Those are ports specified by the 'SlurmdPort' key in slurm.conf There are similar errors in the slurmd.log files on both the slave nodes as well: slurmd.log on server2, the error is only at the end of the file (pastebin to the entire log <https://pastebin.com/TwSMiAp7>): root@server2:/var/log# tail -5 slurmd.log [2024-07-26T13:13:53.018] debug: mpi/pmix_v4: init: PMIx plugin loaded[2024-07-26T13:13:53.018] debug: mpi/pmix_v4: init: PMIx plugin loaded[2024-07-26T13:13:53.018] debug2: No mpi.conf file (/etc/slurm/mpi.conf)[2024-07-26T13:13:53.018] error: Error binding slurm stream socket: Address already in use[2024-07-26T13:13:53.018] error: Unable to bind listen port (6818): Address already in use slurmd.log on server3 (pastebin to the entire log <https://pastebin.com/K55cAGLb>): root@server3:/var/log# tail -5 slurmd.log [2024-07-26T13:13:53.383] debug: mpi/pmix_v4: init: PMIx plugin loaded[2024-07-26T13:13:53.383] debug: mpi/pmix_v4: init: PMIx plugin loaded[2024-07-26T13:13:53.383] debug2: No mpi.conf file (/etc/slurm/mpi.conf)[2024-07-26T13:13:53.384] error: Error binding slurm stream socket: Address already in use[2024-07-26T13:13:53.384] error: Unable to bind listen port (6818): Address already in use I use this script to restart slurm whenever I change any of the configs, could the order in which these operations are being done cause the problems I'm facing: #! /bin/bashscp /etc/slurm/slurm.conf /etc/slurm/gres.conf server2:/etc/slurm/ && echo copied slurm.conf and gres.conf to server2;scp /etc/slurm/slurm.conf /etc/slurm/gres.conf server3:/etc/slurm/ && echo copied slurm.conf and gres.conf to server3;echoecho restarting slurmctld and slurmd on server1(scontrol shutdown ; sleep 3 ; rm -f /var/log/slurmd.log /var/log/slurmctld.log ; slurmctld -d ; sleep 3 ; slurmd) && echo doneecho restarting slurmd on server2(ssh server2 "rm -f /var/log/slurmd.log /var/log/slurmctld.log ; slurmd") && echo doneecho restarting slurmd on server3(ssh server3 "rm -f /var/log/slurmd.log /var/log/slurmctld.log ; slurmd") && echo done Config files: slurm.conf without the comments: root@server1:/etc/slurm# grep -v "#" slurm.conf ClusterName=DlabClusterSlurmctldHost=server1GresTypes=gpuProctrackType=proctrack/linuxprocReturnToService=1SlurmctldPidFile=/var/run/slurmctld.pidSlurmctldPort=6817SlurmdPidFile=/var/run/slurmd.pidSlurmdPort=6818SlurmdSpoolDir=/var/spool/slurmdSlurmUser=rootStateSaveLocation=/var/spool/slurmctldTaskPlugin=task/affinity,task/cgroupInactiveLimit=0KillWait=30MinJobAge=300SlurmctldTimeout=120SlurmdTimeout=300Waittime=0SchedulerType=sched/backfillSelectType=select/cons_tresJobCompType=jobcomp/noneJobAcctGatherFrequency=30SlurmctldDebug=debug2SlurmctldLogFile=/var/log/slurmctld.logSlurmdDebug=debug2SlurmdLogFile=/var/log/slurmd.logNodeName=server[1-3] RealMemory=128636 Sockets=1 CoresPerSocket=64 ThreadsPerCore=2 State=UNKNOWN Gres=gpu:1PartitionName=mainPartition Nodes=ALL Default=YES MaxTime=INFINITE State=UP gres.conf: root@server1:/etc/slurm# cat gres.confNodeName=server1 Name=gpu File=/dev/nvidia0NodeName=server2 Name=gpu File=/dev/nvidia0NodeName=server3 Name=gpu File=/dev/nvidia0 These config files are the same on all 3 computers. As a complete beginner to Linux and Slurm administration, I have been struggling to understand even the most basic documentation, and I have been unable to find answers online. Any assistance would be greatly appreciated. Thanks! [View Less]

1 1

slurmctld hourly: Unexpected missing socket error
by Jason Ellul 29 Jul '24

29 Jul '24

Hi all, I am hoping someone can help with our problem. Every hour after restarting slurmctld the controller becomes unresponsive to commands for 1 sec, reporting errors such as: [2024-07-15T11:45:48.509] error: slurm_send_node_msg: [socket:[934767]] slurm_bufs_sendto(msg_type=RESPONSE_JOB_INFO) failed: Unexpected missing socket error [2024-07-15T11:45:48.509] error: slurm_send_node_msg: [socket:[934760]] slurm_bufs_sendto(msg_type=RESPONSE_SLURM_RC) failed: Unexpected missing socket error [… [View More]

2 4

Final Call for SLUG Standard Registration
by Victoria Hobson 29 Jul '24

29 Jul '24

Slurm User Group (SLUG) 2024 is set for September 12-13 at the University of Oslo in Oslo, Norway. Registration information, abstracts, and travel recommendations can be found here:https://slug24.splashthat.com/ The last day to register with standard pricing ($900) is this Friday, August 2nd. After this, final registration will run until August 30th at a price of $1100. SLUG is the best way to interact with the Slurm community and to interact with the SchedMD Support & Training staff. … [View More]

1 0

Convergence of Kube and Slurm?
by Dan Healy 29 Jul '24

29 Jul '24

Bright Cluster Manager has some verbiage on their marketing site that they can manage a cluster running both Kubernetes and Slurm. Maybe I misunderstood it. But nevertheless, I am encountering groups more frequently that want to run a stack of containers that need private container networking. What’s the current state of using the same HPC cluster for both Slurm and Kube? Note: I’m aware that I can run Kube on a single node, but we need more resources. So ultimately we need a way to have … [View More]

5 4

Slurm fails before nvidia-smi command
by Aziz Ogutlu 29 Jul '24

29 Jul '24

Hi there all, We have Dell server with 2 x Nvidia H100 and running slurm on it. After restart server if we do not write nvidia-smi command slurm fails. When we run nvidia-smi && systemctl restart slurmd && systemctl restart slurmctld , slurm queue begins. Do you have any idea about this error and what can we do for this issue? -- Best regards, Aziz Öğütlü Eduline Bilişim Sanayi ve Ticaret Ltd. Şti. www.eduline.com.tr Merkez Mah. Ayazma Cad. No:37 Papirus Plaza Kat:… [View More]

4 4

Slurm sacct ResvCPURAW invalid field in version 24.12.5
by Mike Mikailov 29 Jul '24

29 Jul '24

Dear All, Does anyone know what is the equivalent field for ResvCPURAW of sacct command of Slurm in its version 23.11.5. I get: sacct: error: Invalid field requested “ResvCPURAW”. Your help at your earliest is very much appreciated. Best, -Mike Sent from my iPhone

2 1

Background tasks in Slurm scripts?
by Steffen Grunewald 26 Jul '24

26 Jul '24

Good morning, yesterday I came across a Slurm (sbatch) script that, after doing some stuff in the foreground, runs another executable in the background - and doesn't "wait" for it to finish - literally the last line of the script is executable & (and that executable is supposed to take several 10 seconds or more to finish) How would Slurm handle this? Will the end of the script immediately trigger the job epilog, and what would happen to the leftover task? This certainly is discussed … [View More]

3 3

API - Specify GPUs
by jpuerto＠psc.edu 26 Jul '24

26 Jul '24

Good Afternoon All, It does not seem that the REST API allows for folks to configure their jobs to utilize GPUs, using the traditional methods. IE, there does not appear to be an equivalent between the --gpus (or --gres) flag on sbatch/srun and the REST API's job submission endpoint. Can anyone point me towards what should be used if the version we are on does not support tres specifications? Best regards, Juan Puerto

2 1

Error binding slurm stream socket: Address already in use, and GPU GRES verification
by Shooktija S N 23 Jul '24

23 Jul '24

Hi, I am trying to set up Slurm with GPUs as GRES on a 3 node configuration (hostnames: server1, server2, server3). For a while everything looked fine and I was able to run srun --label --nodes=3 hostname which is what I use to test if Slurm is working correctly, and then it randomly stops. Turns out slurmctld is not working and it throws the following error (the two lines are consecutive in the log file): root@server1:/var/log# grep -i error slurmctld.log [2024-07-22T14:47:32.302] error: … [View More]Error binding slurm stream socket: Address already in use[2024-07-22T14:47:32.302] fatal: slurm_init_msg_engine_port error Address already in use This error is being thrown after having made no changes to the config files, in fact the cluster wasn't used at all for a few weeks before this error was thrown. This is the simple script I use to restart Slurm: root@server1:~# cat slurmRestart.sh #! /bin/bashscp /etc/slurm/slurm.conf server2:/etc/slurm/ && echo copied slurm.conf to server2;scp /etc/slurm/slurm.conf server3:/etc/slurm/ && echo copied slurm.conf to server3;rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld ; echo restarting slurm on server1;(ssh server2 "rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld") && echo restarting slurm on server2;(ssh server3 "rm /var/log/slurmd.log /var/log/slurmctld.log ; systemctl restart slurmd slurmctld") && echo restarting slurm on server3; Could the error be due to the slurmd and/or slurmctld not being started in the right order? The other question I have is regarding the configuration of a GPU as a GRES - how do I verify that it has been configured correctly? I was told to use srun nvidia-smi with and without having enabled GPU use, but whether or not I enable GPU usage has no effect on the output of the command: root@server1:~# srun --nodes=1 nvidia-smi --query-gpu=uuid --format=csvuuidGPU-55f127a8-dbf4-fd12-3cad-c0d5f2dcb005root@server1:~# root@server1:~# srun --nodes=1 --gpus-per-node=1 nvidia-smi --query-gpu=uuid --format=csvuuidGPU-55f127a8-dbf4-fd12-3cad-c0d5f2dcb005 I am sceptical if about whether the GPU has properly been configured, is this the best way to check if it has? *The error:* I first noticed this happening when I tried to run the command I usually use to see if everything is fine, the srun command runs only one node, and the only way to stop it if I specify the number of nodes as 3 is to press Ctrl+C: root@server1:~# srun --label --nodes=1 hostname0: server1root@server1:~# ssh server2 "srun --label --nodes=1 hostname"0: server1root@server1:~# ssh server3 "srun --label --nodes=1 hostname"0: server1root@server1:~# srun --label --nodes=3 hostnamesrun: Required node not available (down, drained or reserved)srun: job 265 queued and waiting for resources^Csrun: Job allocation 265 has been revokedsrun: Force Terminated JobId=265root@server1:~# ssh server2 "srun --label --nodes=3 hostname"srun: Required node not available (down, drained or reserved)srun: job 266 queued and waiting for resources^Croot@server1:~# ssh server3 "srun --label --nodes=3 hostname"srun: Required node not available (down, drained or reserved)srun: job 267 queued and waiting for resourcesroot@server1:~# *The logs:* 1) The last 30 lines of */var/log/slurmctld.log* at the debug5 level in server #1 (pastebin to the entire log <https://pastebin.com/fw4C4xtr>): root@server1:/var/log# tail -30 slurmctld.log [2024-07-22T14:47:32.301] debug: Updating partition uid access list[2024-07-22T14:47:32.301] debug3: create_mmap_buf: loaded file `/var/spool/slurmctld/resv_state` as buf_t[2024-07-22T14:47:32.301] debug3: Version string in resv_state header is PROTOCOL_VERSION[2024-07-22T14:47:32.301] Recovered state of 0 reservations[2024-07-22T14:47:32.301] debug3: create_mmap_buf: loaded file `/var/spool/slurmctld/trigger_state` as buf_t[2024-07-22T14:47:32.301] State of 0 triggers recovered[2024-07-22T14:47:32.301] read_slurm_conf: backup_controller not specified[2024-07-22T14:47:32.301] select/cons_tres: select_p_reconfigure: select/cons_tres: reconfigure[2024-07-22T14:47:32.301] select/cons_tres: part_data_create_array: select/cons_tres: preparing for 1 partitions[2024-07-22T14:47:32.301] debug: power_save module disabled, SuspendTime < 0[2024-07-22T14:47:32.301] Running as primary controller[2024-07-22T14:47:32.301] debug: No backup controllers, not launching heartbeat.[2024-07-22T14:47:32.301] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/priority_basic.so[2024-07-22T14:47:32.301] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Priority BASIC plugin type:priority/basic version:0x160508[2024-07-22T14:47:32.301] debug: priority/basic: init: Priority BASIC plugin loaded[2024-07-22T14:47:32.301] debug3: Success.[2024-07-22T14:47:32.301] No parameter for mcs plugin, default values set[2024-07-22T14:47:32.301] mcs: MCSParameters = (null). ondemand set.[2024-07-22T14:47:32.301] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/mcs_none.so[2024-07-22T14:47:32.301] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:mcs none plugin type:mcs/none version:0x160508[2024-07-22T14:47:32.301] debug: mcs/none: init: mcs none plugin loaded[2024-07-22T14:47:32.301] debug3: Success.[2024-07-22T14:47:32.302] debug3: _slurmctld_rpc_mgr pid = 3159324[2024-07-22T14:47:32.302] debug3: _slurmctld_background pid = 3159324[2024-07-22T14:47:32.302] error: Error binding slurm stream socket: Address already in use[2024-07-22T14:47:32.302] fatal: slurm_init_msg_engine_port error Address already in use[2024-07-22T14:47:32.304] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.304] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.304] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.304] slurmscriptd: debug: _slurmscriptd_mainloop: finished 2) Entirety of *slurmctld.log on server #2*: root@server2:/var/log# cat slurmctld.log [2024-07-22T14:47:32.614] debug: slurmctld log levels: stderr=debug5 logfile=debug5 syslog=quiet[2024-07-22T14:47:32.614] debug: Log file re-opened[2024-07-22T14:47:32.615] slurmscriptd: debug: slurmscriptd: Got ack from slurmctld, initialization successful[2024-07-22T14:47:32.615] slurmscriptd: debug: _slurmscriptd_mainloop: started[2024-07-22T14:47:32.616] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.616] debug: slurmctld: slurmscriptd fork()'d and initialized.[2024-07-22T14:47:32.616] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.616] debug: _slurmctld_listener_thread: started listening to slurmscriptd[2024-07-22T14:47:32.616] debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.616] debug3: Called _msg_readable[2024-07-22T14:47:32.616] slurmctld version 22.05.8 started on cluster dlabcluster[2024-07-22T14:47:32.616] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/cred_munge.so[2024-07-22T14:47:32.616] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Munge credential signature plugin type:cred/munge version:0x160508[2024-07-22T14:47:32.616] cred/munge: init: Munge credential signature plugin loaded[2024-07-22T14:47:32.616] debug3: Success.[2024-07-22T14:47:32.616] error: This host (server2/server2) not a valid controller[2024-07-22T14:47:32.617] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.617] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.617] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.617] slurmscriptd: debug: _slurmscriptd_mainloop: finished 3) Entirety of *slurmctld.log on server #3*: root@server3:/var/log# cat slurmctld.log [2024-07-22T14:47:32.927] debug: slurmctld log levels: stderr=debug5 logfile=debug5 syslog=quiet[2024-07-22T14:47:32.927] debug: Log file re-opened[2024-07-22T14:47:32.928] slurmscriptd: debug: slurmscriptd: Got ack from slurmctld, initialization successful[2024-07-22T14:47:32.928] slurmscriptd: debug: _slurmscriptd_mainloop: started[2024-07-22T14:47:32.928] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.928] debug: slurmctld: slurmscriptd fork()'d and initialized.[2024-07-22T14:47:32.928] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.928] slurmctld version 22.05.8 started on cluster dlabcluster[2024-07-22T14:47:32.929] debug: _slurmctld_listener_thread: started listening to slurmscriptd[2024-07-22T14:47:32.929] debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.929] debug3: Called _msg_readable[2024-07-22T14:47:32.929] debug3: Trying to load plugin /usr/lib/x86_64-linux-gnu/slurm-wlm/cred_munge.so[2024-07-22T14:47:32.929] debug3: plugin_load_from_file->_verify_syms: found Slurm plugin name:Munge credential signature plugin type:cred/munge version:0x160508[2024-07-22T14:47:32.929] cred/munge: init: Munge credential signature plugin loaded[2024-07-22T14:47:32.929] debug3: Success.[2024-07-22T14:47:32.929] error: This host (server3/server3) not a valid controller[2024-07-22T14:47:32.930] slurmscriptd: debug3: Called _handle_close[2024-07-22T14:47:32.930] slurmscriptd: debug4: eio: handling events for 1 objects[2024-07-22T14:47:32.930] slurmscriptd: debug3: Called _msg_readable[2024-07-22T14:47:32.930] slurmscriptd: debug: _slurmscriptd_mainloop: finished *The config files (shared by all 3 computers):* 1) */etc/slurm/slurm.conf* without the comments: root@server1:/etc/slurm# grep -v "#" slurm.conf ClusterName=DlabClusterSlurmctldHost=server1GresTypes=gpuProctrackType=proctrack/linuxprocReturnToService=1SlurmctldPidFile=/var/run/slurmctld.pidSlurmctldPort=6817SlurmdPidFile=/var/run/slurmd.pidSlurmdPort=6818SlurmdSpoolDir=/var/spool/slurmdSlurmUser=rootStateSaveLocation=/var/spool/slurmctldTaskPlugin=task/affinity,task/cgroupInactiveLimit=0KillWait=30MinJobAge=300SlurmctldTimeout=120SlurmdTimeout=300Waittime=0SchedulerType=sched/backfillSelectType=select/cons_tresJobCompType=jobcomp/noneJobAcctGatherFrequency=30SlurmctldDebug=debug5SlurmctldLogFile=/var/log/slurmctld.logSlurmdDebug=debug5SlurmdLogFile=/var/log/slurmd.logNodeName=server[1-3] RealMemory=128636 Sockets=1 CoresPerSocket=64 ThreadsPerCore=2 State=UNKNOWN Gres=gpu:1PartitionName=mainPartition Nodes=ALL Default=YES MaxTime=INFINITE State=UP 2) */etc/slurm/gres.conf*: root@server1:/etc/slurm# cat gres.conf NodeName=server1 Name=gpu File=/dev/nvidia0NodeName=server2 Name=gpu File=/dev/nvidia0NodeName=server3 Name=gpu File=/dev/nvidia0 These files are the same on all 3 computers: root@server1:/etc/slurm# diff slurm.conf <(ssh server2 "cat /etc/slurm/slurm.conf")root@server1:/etc/slurm# diff slurm.conf <(ssh server3 "cat /etc/slurm/slurm.conf")root@server1:/etc/slurm# diff gres.conf <(ssh server2 "cat /etc/slurm/gres.conf")root@server1:/etc/slurm# diff gres.conf <(ssh server3 "cat /etc/slurm/gres.conf")root@server1:/etc/slurm# Thank you, Shookti [View Less]

1 0

Cgroup
by stth 22 Jul '24

22 Jul '24

Hello, I am configuring cgroups on my server for the first time. I've created a cgroup.conf file in the Slurm directory with the following values: ConstrainCores=yes ConstrainRAMSpace=yes ConstrainSwapSpace=yes AllowedRAMSpace=90 AllowedSwapSpace=10 I feel like this configuration might be incomplete. Can anyone provide assistance? I haven't found any specific guidance online. Thanks!

2 1

Custom Plugin Integration
by Bhaskar Chakraborty 20 Jul '24

20 Jul '24

Hello, We wish to have a schedulingintegration with Slurm. Our own application has a backend system which willdecide the placement of jobs across hosts & CPU cores. The backend takesits own time to come back with a placement (which may take a few seconds) & we expect slurm to update it regularly about any change in the current state ofavailable resources. For this we believe we have 3 options broadly: - We use the const_tres Select plugin & modify it to let it query our … [View More]

3 7

CLOUD nodes with unknown IP addresses
by Martin Lee 19 Jul '24

19 Jul '24

I've read the following in the slurm power saving docs: https://slurm.schedmd.com/power_save.html > *cloud_dns* > By default, Slurm expects that the network addresses for cloud nodes won't be known until creation of the node and that Slurm will be notified of the node's address upon registration. Since Slurm communications rely on the node configuration found in the slurm.conf, Slurm will tell the client command, after waiting for all nodes to boot, each node's IP address. However, in … [View More]

2 2

Slurm Users cannot open gui login nodes with X11 without logging into the Compute node.
by Alper AYKUT 18 Jul '24

18 Jul '24

Hello 1 Login Server I have a total of 3 calculation nodes. Especially in non-GUI jobs, I can run scripts successfully with Slurm sbatch. However, when it is with Gui, I run it with X11. However, my problem for now is this: When I run sbatch gui.sh, it runs smoothly and automatically selects the calculation node and gui is active on the login server. But the node it selects must be logged in with the same user for x11 to work. How can I run the application with gui on the login node without … [View More]

1 0

Nodes TRES double what is requested
by jack.mellor＠mbda.co.uk 12 Jul '24

12 Jul '24

Hi, We are running slurm 23.02.6. Our nodes have hyperthreading disabled and we have slurm.conf set to CPU=32 for each node (each node has 2 processes with 16 cores). When we allocated a job, such as salloc -n 32, it will allocate a whole node but using sinfo shows double the allocation in the TRES=64. It also shows in sinfo that the node has 4294967264 idle CPUs. Not sure if its a known bug, or an issue with our config? I have tried various things, like setting the sockets/boards in slurm.conf. Thanks Jack

5 4

SLURM noob administrator question
by Cutts, Tim 11 Jul '24

11 Jul '24

Still learning about SLURM, so please forgive me if I ask a naïve question I like to use Anders Halager’s gnodes command to visualise the state of our nodes. I’ve noticed lately that we fairly often see things like this (apologies for line wrap): +- core - 46 cores & 186GB -----------------------------------------+-------------------------------------------------------------------+-------------------------------------------------------------------+ | seskscpn301 0G … [View More]

2 1

Replacing MUNGE with SACK (auth/slurm)
by Daniel Letai 11 Jul '24

11 Jul '24

Does SACK replace MUNGE? As in - MUNGE is not required when building Slurm or on compute? If so, can the Requires and BuildRequires for munge be made optional on bcond_without_munge in the spec file? Or is there a reason MUNGE must remain a hard require for Slurm? Thanks, --Dani_L.

1 0

Job submitted to multiple partitions not running when any partition is full
by Paul Raines 09 Jul '24

09 Jul '24

I have a job 465072 submitted to multiple partitions (rtx6000,rtx8000,pubgpu) JOBID PARTITION PENDING PRIORITY TRES_ALLOC|REASON 4650727 rtx6000 47970 0.00367972 cpu=5,mem=400G,node=1,gpu=1|Priority 4650727 rtx8000 47970 0.00367972 cpu=5,mem=400G,node=1,gpu=1|Priority 4650727 pubgpu 47970 0.00367972 cpu=5,mem=400G,node=1,gpu=1|Priority 4646926 rtx6000 487048 0.00121987 cpu=10,mem=32G,node=1,gpu=1|Priority,Resources 4650186 rtx8000 56979 0.00000000 cpu=4,mem=10G,… [View More]

2 2

Temporarily bypassing pam_slurm_adopt.so
by Daniel L'Hommedieu 09 Jul '24

09 Jul '24

Hi, all. We have a use case where we need to allow a group of users (members of an LDAP group, which I can easily add to a Linux group) to SSH to a compute node, without disabling pam_slurm_adopt.so. Is there a way to do this? We can add users to the sudo group, which will bypass pam_slurm_adopt.so, but we do not want to grant sudo access to these users. Is there any way to bypass for a group of users, pam_slurm_adopt.so without removing it from /etc/pam.d/sshd, and without adding them to … [View More]

5 4

vers 23: slurmctld pb (memory leak and response time)
by LEROY Christine 208562 09 Jul '24

09 Jul '24

Hello Everyone, We tried several version of slurm 23-x (till the last one: 23.11.8), and we observe a memory leak in slurmctld in addition to a bad response time (sometimes). It seems to be due to a slurm.conf configuration with Partition containing Allowgroups option. Is it a known problem? Is it recommended to use the version 22, or 24 ? Thanks in advance, Christine Leroy

1 1

Can SLURM queue different jobs to start concurrently?
by Dan Healy 08 Jul '24

08 Jul '24

Hi there, I've received a question from an end user, which I presume the answer is "No", but would like to ask the community first. Scenario: The user wants to create a series of jobs that all need to start at the same time. Example: there are 10 different executable applications which have varying CPU and RAM constraints, all of which need to communicate via TCP/IP. Of course the user could design some type of idle/statusing mechanism to wait until all jobs are *randomly *started, then begin … [View More]

3 2

Re: Can SLURM queue different jobs to start concurrently?
by Lloyd Brown 08 Jul '24

08 Jul '24

I'm confused. Why can't they just use a multi-node job, and have the job script farm out the individual tasks to the various workers through some mechanism (srun, mpirun, ssh, etc.)? AFAIK, there's nothing preventing a job from using resources on multiple hosts. The job just needs to have some way of pushing the work out to those hosts. Lloyd On 7/8/24 14:17, Dan Healy via slurm-users wrote: > Hi there, > > I've received a question from an end user, which I … [View More]

1 0

cgroups/v2 plugin rpmbuild issue
by Chris Taylor 06 Jul '24

06 Jul '24

Trying to use rpmbuild on Rocky9 Linux, Slurm 21.08 - I want to build with cgroups/v2 support and have these installed: libbpf-devel.x86_64 2:1.3.0-2.el9 dbus-devel.x86_64 1:1.12.20-8.el9 kernel-headers.x86_64 5.14.0-427.22.1.el9_4 hwloc-devel.x86_64 2.4.1-5.el9 In https://slurm.schedmd.com/cgroup_v2.html it says: Requirements For building cgroup/v2 there are two required libraries … [View More]

2 3

Qlustar HPC Core Stack 24.06
by Roland Fehrenbacher 06 Jul '24

06 Jul '24

Hi all, the Qlustar HPC Core Stack 24.06 update is available. It includes an update to Slurm 23.11.8. Find further details at https://qlustar.com/news/2024/2024-06-29-hpc-core-stack-2406 Enjoy, Roland ------- https://qlustar.com -- 100% Open Source HPC / AI / Storage / Cloud Linux Cluster OS --

1 0

Run a program via Strigger when a node joins the cluster
by Karri Vrkreddy 05 Jul '24

05 Jul '24

Hi, We have a requirement to run a specific program whenever any new node joins the slurm cluster. For this, we have tried using strigger with the following options : "strigger --set --node --up --flags=perm --program=<program>" We see that the trigger is not getting activated always. Checked slurmctld logs for "type=node:up" and noticed it is not always happening. Based on documentation at https://slurm.schedmd.com/strigger.html , "up" flag would mean … [View More]

1 0

Using sharding
by Ricardo Cruz 05 Jul '24

05 Jul '24

Greetings, There are not many questions regarding GPU sharding here, and I am unsure if I am using it correctly... I have configured it according to the instructions <https://slurm.schedmd.com/gres.html>, and it seems to be configured properly: $ scontrol show node compute01 NodeName=compute01 Arch=x86_64 CoresPerSocket=32 CPUAlloc=48 CPUEfctv=128 CPUTot=128 CPULoad=10.95 AvailableFeatures=(null) ActiveFeatures=(null) * Gres=gpu:8,shard:32* [truncated] When running with … [View More]gres:gpu everything works perfectly: $ /usr/bin/srun --gres=gpu:2 ls srun: job 192 queued and waiting for resources srun: job 192 has been allocated resources (...) However, when using sharding, it just stays waiting indefinitely: $ /usr/bin/srun --gres=shard:2 ls srun: job 193 queued and waiting for resources The reason it gives for pending is just "Resources": $ scontrol show job 193 JobId=193 JobName=ls UserId=rpcruz(1000) GroupId=rpcruz(1000) MCS_label=N/A Priority=1 Nice=0 Account=account QOS=normal * JobState=PENDING Reason=Resources Dependency=(null)* Requeue=1 Restarts=0 BatchFlag=0 Reboot=0 ExitCode=0:0 RunTime=00:00:00 TimeLimit=2-00:00:00 TimeMin=N/A SubmitTime=2024-06-28T05:36:51 EligibleTime=2024-06-28T05:36:51 AccrueTime=2024-06-28T05:36:51 StartTime=2024-06-29T18:13:22 EndTime=2024-07-01T18:13:22 Deadline=N/A SuspendTime=None SecsPreSuspend=0 LastSchedEval=2024-06-28T05:37:20 Scheduler=Backfill:* Partition=partition AllocNode:Sid=localhost:47757 ReqNodeList=(null) ExcNodeList=(null) NodeList= NumNodes=1 NumCPUs=1 NumTasks=1 CPUs/Task=1 ReqB:S:C:T=0:0:*:* ReqTRES=cpu=1,mem=1031887M,node=1,billing=1 AllocTRES=(null) Socks/Node=* NtasksPerN:B:S:C=0:0:*:* CoreSpec=* MinCPUsNode=1 MinMemoryNode=0 MinTmpDiskNode=0 Features=(null) DelayBoot=00:00:00 OverSubscribe=OK Contiguous=0 Licenses=(null) Network=(null) Command=ls WorkDir=/home/rpcruz Power= * TresPerNode=gres/shard:2* Again, I think I have configured it properly - it shows up correctly in scontrol (as shown above). Our setup is pretty simple - I just added shard to /etc/slurm/slurm.conf: GresTypes=gpu,shard NodeName=compute01 Gres=gpu:8,shard:32 [truncated] Our /etc/slurm/gres.conf is also straight-forward: (it works fine for --gres=gpu:1) Name=gpu File=/dev/nvidia[0-7] Name=shard Count=32 Maybe I am just running srun improperly? Shouldn't it just be srun --gres= shard:2 to allocate half of a GPU? (since I am using 32 shards for the 8 gpus, so it's 4 shards per gpu) Thank you very much for your attention, -- Ricardo Cruz - https://rpmcruz.github.io [View Less]

5 7

Re: Slurm commands fail when run in Singularity container with the error "Invalid user for SlurmUser slurm, SINGULARITYENV_SLURM_CONF
by Robert Kudyba 03 Jul '24

03 Jul '24

In https://support.schedmd.com/show_bug.cgi?id=9282#c6 Tim mentioned this env variable SINGULARITYENV_SLURM_CONF, what is the usage/syntax for it? I can't find any reference to this. I'm running into the same issue mentioned there. Thanks in advance!

2 2

2025

2024

slurm-users July 2024

2025

2024

slurm-users July 2024 ----- 2025 ----- May 2025 April 2025 March 2025 February 2025 January 2025 ----- 2024 ----- December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024

slurm-users July 2024