[slurm-users] How to request for the allocation of scratch .

Mon Apr 20 10:00:27 UTC 2020

I attempted again and it gets succeed.
Thanks for your help.

On Thu, Apr 16, 2020 at 9:45 PM Ellestad, Erik <Erik.Ellestad at ucsf.edu>
wrote:

> That all seems fine to me.
>
> I would check into your slurm logs to try and determine why slurm put your
> nodes into drain state.
>
> Erik
>
> ---
> Erik Ellestad
> Wynton Cluster SysAdmin
> UCSF
> ------------------------------
> *From:* slurm-users <slurm-users-bounces at lists.schedmd.com> on behalf of
> navin srivastava <navin.altair at gmail.com>
> *Sent:* Wednesday, April 15, 2020 10:37 PM
> *To:* Slurm User Community List <slurm-users at lists.schedmd.com>
> *Subject:* Re: [slurm-users] How to request for the allocation of scratch
> .
>
> Thanks Erik.
>
> Last night i made the changes.
>
> i defined in slurm.conf on all the nodes as well as on the slurm server.
>
> TmpFS=/lscratch
>
>  NodeName=node[01-10]  CPUs=44  RealMemory=257380 Sockets=2
> CoresPerSocket=22 ThreadsPerCore=1 TmpDisk=1600000 State=UNKNOWN
> Feature=P4000 Gres=gpu:2
>
> These nodes having 1.6TB local scratch. i did a scontrol reconfig on all
> the nodes but after sometime we saw all nodes went into drain state.then i
> revert back the changes with old one.
>
> on all nodes jobs were running and the localsctratch is 20-25% in use.
> we have already cleanup script in crontab which used to clean the scratch
> space regularly.
>
> is anything wrong here?
>
>
> Regards
> Navin.
>
>
>
>
>
>
>
>
>
> On Thu, Apr 16, 2020 at 12:26 AM Ellestad, Erik <Erik.Ellestad at ucsf.edu>
> wrote:
>
> The default value for TmpDisk is 0, so if you want local scratch
> available on a node, the amount of TmpDisk space must be defined in the
> node configuration in slurm.conf.
>
> example:
>
> NodeName=TestNode01 CPUs=8 Boards=1 SocketsPerBoard=2 CoresPerSocket=4
> ThreadsPerCore=1 RealMemory=24099 TmpDisk=150000
>
> The configuration value for the node definition is in MB.
>
> https://slurm.schedmd.com/slurm.conf.html
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__slurm.schedmd.com_slurm.conf.html&d=DwMFaQ&c=iORugZls2LlYyCAZRB3XLg&r=Ct3zEADMmPgyUYfpHDJQWaWsE9mNbEHEhGxpsYoThbE&m=S4Dlg4-bVtpN7A5uGS3U053sTbGLQhWWqF7czJWRhO8&s=-q_lB4fzIj8i2PkR5NfWJomcaoDnRlBuyvyxkf4V0hQ&e=>
>
> *TmpDisk*Total size of temporary disk storage in *TmpFS* in megabytes
> (e.g. "16384"). *TmpFS* (for "Temporary File System") identifies the
> location which jobs should use for temporary storage. Note this does not
> indicate the amount of free space available to the user on the node, only
> the total file system size. The system administration should ensure this
> file system is purged as needed so that user jobs have access to most of
> this space. The Prolog and/or Epilog programs (specified in the
> configuration file) might be used to ensure the file system is kept clean.
> The default value is 0.
>
> When requesting --tmp with srun or sbatch, it can be done in various size
> formats:
>
> *--tmp*=<*size[units]*> Specify a minimum amount of temporary disk space
> per node. Default units are megabytes unless the SchedulerParameters
> configuration parameter includes the "default_gbytes" option for gigabytes.
> Different units can be specified using the suffix [K|M|G|T].
> https://slurm.schedmd.com/sbatch.html
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__slurm.schedmd.com_sbatch.html&d=DwMFaQ&c=iORugZls2LlYyCAZRB3XLg&r=Ct3zEADMmPgyUYfpHDJQWaWsE9mNbEHEhGxpsYoThbE&m=S4Dlg4-bVtpN7A5uGS3U053sTbGLQhWWqF7czJWRhO8&s=yF9k9ysKRaVnu_ZnNdHsxj8Yc6X7PXTlId7i3XgZ5V4&e=>
>
>
>
> ---
> Erik Ellestad
> Wynton Cluster SysAdmin
> UCSF
> ------------------------------
> *From:* slurm-users <slurm-users-bounces at lists.schedmd.com> on behalf of
> navin srivastava <navin.altair at gmail.com>
> *Sent:* Tuesday, April 14, 2020 11:19 PM
> *To:* Slurm User Community List <slurm-users at lists.schedmd.com>
> *Subject:* Re: [slurm-users] How to request for the allocation of scratch
> .
>
> Thank you Erik.
>
> To define the local scratch on all the compute node is not mandatory? only
> on slurm server is enough right?
> Also the TMPdisk should be defined in MB or can be defined in GB as well
>
> while requesting --tmp , we can use the value in GB right?
>
> Regards
> Navin.
>
>
>
> On Tue, Apr 14, 2020 at 11:04 PM Ellestad, Erik <Erik.Ellestad at ucsf.edu>
> wrote:
>
> Have you defined the TmpDisk value for each node?
>
> As far as I know, local disk space is not a valid type for GRES.
>
> https://slurm.schedmd.com/gres.html
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__slurm.schedmd.com_gres.html&d=DwMFaQ&c=iORugZls2LlYyCAZRB3XLg&r=Ct3zEADMmPgyUYfpHDJQWaWsE9mNbEHEhGxpsYoThbE&m=qpy9RbpYHEmd6jqfs9j8b4IiRJf3GkO-X_v05nL-8Bo&s=B5wXNgnl6EdXIaS0QQpITnBTSxcjnAHJENyJGLyWltI&e=>
>
> "Generic resource (GRES) scheduling is supported through a flexible plugin
> mechanism. Support is currently provided for Graphics Processing Units
> (GPUs), CUDA Multi-Process Service (MPS), and Intel® Many Integrated Core
> (MIC) processors."
>
> The only valid solution I've found for scratch is to:
>
> In slurm.conf, define the location of local scratch globally via TmpFS.
>
> And then the amount per host is defined via TmpDisk=xxx.
>
> Then the request for srun/sbatch via --tmp=X
>
>
>
> ---
> Erik Ellestad
> Wynton Cluster SysAdmin
> UCSF
> ------------------------------
> *From:* slurm-users <slurm-users-bounces at lists.schedmd.com> on behalf of
> navin srivastava <navin.altair at gmail.com>
> *Sent:* Tuesday, April 14, 2020 7:32 AM
> *To:* Slurm User Community List <slurm-users at lists.schedmd.com>
> *Subject:* Re: [slurm-users] How to request for the allocation of scratch
> .
>
>
> Any suggestion on the above query.need help to understand it.
> Does TmpFS=/scratch   and the request is #SBATCH --tmp=500GB  then it will
> reserve the 500GB from scratch.
> let me know if my assumption is correct?
>
> Regards
> Navin.
>
>
> On Mon, Apr 13, 2020 at 11:10 AM navin srivastava <navin.altair at gmail.com>
> wrote:
>
> Hi Team,
>
> i wanted to define a mechanism to request the local disk space while
> submitting the job.
>
> we have dedicated /scratch of 1.2 TB file system for the execution of the
> job on each of the compute nodes other than / and other file system.
> i have defined in slurm.conf as TmpFS=/scratch  and then wanted to use
> #SBATCH --scratch =10GB   in the request.
> but it seems it is not accepting this variable except /tmp.
>
> Then i have opted the mechanism of gres.conf
>
> GresTypes=gpu,scratch
>
> and defined each node the scratch value and then requested using
> --gres=lscratch:10GB
> but in this scenario if requesting both gres resources gpu as well as
> scratch it show me only scratch in my Gres resource not gpu.
> does it using the gpu also as a gres resource?
>
> could anybody please advice which is the correct method to achieve the
> same?
> Also, is scratch will be able to calculate the actual usage value on the
> node.
>
> REgards
> Navin.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.schedmd.com/pipermail/slurm-users/attachments/20200420/f92eb547/attachment-0001.htm>