My slurm.conf file is as follows：
ClusterName=hpc01 SlurmctldHost=node196 SlurmctldPort=6817 SlurmdPort=6818 SlurmUser=slurm SlurmctldDebug=debug SlurmctldLogFile=/var/log/slurm/slurmctld.log SlurmdDebug=debug SlurmdLogFile=/var/log/slurm/slurmd.log SlurmctldPidFile=/var/run/slurmctld/slurmctld.pid SlurmdPidFile=/var/run/slurmd/slurmd.pid SlurmdSpoolDir=/var/spool/slurmd StateSaveLocation=/var/spool/slurmctld AccountingStorageEnforce=associations,limits,qos AccountingStorageHost=node196 AccountingStoragePort=6819 AccountingStorageType=accounting_storage/slurmdbd JobContainerType=job_container/none JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/cgroup SchedulerType=sched/backfill SelectType=select/cons_tres SelectTypeParameters=CR_CORE_MEMORY InactiveLimit=0 KillWait=30 MinJobAge=300 SlurmctldTimeout=60 SlurmdTimeout=120 Waittime=0 AuthType=auth/munge CredType=cred/munge EnforcePartLimits=YES MpiDefault=none ProctrackType=proctrack/cgroup ReturnToService=1 SwitchType=switch/none TaskPlugin=task/affinity,task/cgroup MaxJobCount=10000 MaxArraySize=1001 MailProg=/usr/bin/smail PluginDir=/usr/local/slurm-23.02.6/lib/slurm NodeName=node196 Sockets=1 CoresPerSocket=2 ThreadsPerCore=2 RealMemory=4096 State=UNKNOWN PartitionName=T1 Nodes=node196 DefMemPerCPU=1024 Default=YES State=UP AllowAccounts=root
shaobo liu dspam.liu@gmail.com 于2024年10月19日周六 16:34写道：
My slurm is 23.02.6，I have used EnforcePartLimits=ALL，Users outside of AllowAccounts can still submit。
root@node196:/etc/slurm# scontrol show config |grep EnforcePartLimits EnforcePartLimits = ALL root@node196:/etc/slurm# scontrol show part PartitionName=T1 AllowGroups=ALL AllowAccounts=root AllowQos=ALL AllocNodes=ALL Default=YES QoS=N/A DefaultTime=NONE DisableRootJobs=NO ExclusiveUser=NO GraceTime=0 Hidden=NO MaxNodes=UNLIMITED MaxTime=UNLIMITED MinNodes=0 LLN=NO MaxCPUsPerNode=UNLIMITED MaxCPUsPerSocket=UNLIMITED Nodes=node196 PriorityJobFactor=1 PriorityTier=1 RootOnly=NO ReqResv=NO OverSubscribe=NO OverTimeLimit=NONE PreemptMode=OFF State=UP TotalCPUs=4 TotalNodes=1 SelectTypeParameters=NONE JobDefaults=(null) DefMemPerCPU=1024 MaxMemPerNode=UNLIMITED TRES=cpu=4,mem=4G,node=1,billing=4
Paul Raines via slurm-users slurm-users@lists.schedmd.com 于2024年10月17日周四 22:24写道：
I am using Slurm 23.11.3 and it AllowAccounts works for me. We have a partition defied with AllowAccounts and if one tries to submit in an account not in the list one will get
srun: error: Unable to allocate resources: Invalid account or account/partition combination specified
Do you have EnforcePartLimits=ALL
On Wed, 16 Oct 2024 8:55pm, shaobo liu via slurm-users wrote:
External Email - Use CautionTested slurm-23.* version, AllowAccounts parameter does not work.
daijiangkuicgo--- via slurm-users slurm-users@lists.schedmd.com 于2024年6月29日周六 16:30写道：
AllowGroups is ok.
-- slurm-users mailing list -- slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-leave@lists.schedmd.com
The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Mass General Brigham Compliance HelpLine at https://www.massgeneralbrigham.org/complianceline < https://www.massgeneralbrigham.org/complianceline%3E . Please note that this e-mail is not secure (encrypted). If you do not wish to continue communication over unencrypted e-mail, please notify the sender of this message immediately. Continuing to send or respond to e-mail after receiving this message means you understand and accept this risk and wish to continue to communicate over unencrypted e-mail.
-- slurm-users mailing list -- slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-leave@lists.schedmd.com