Hi, I believe that setting cores in gres.conf explicitly gives you better control over hardware configuration, I wouldn't trust slurm on that one.
We have the gres.conf along with "Cores", all you have to do is proper Numa discovery (as long as your hardware has numa), and then assign correct cores to correct gpu's. One of the simple ways to discover CPU's affinity with GPU's is with command `nvidia-smi topo -m` which will display HW topology. You need relatively new nvidia driver though.
Also keep in mind, that Intel with newer hardware made a mess with Numa and core bindings, we have a system which has 2 Numa nodes, and one of it has even core numbers, while second numa is with odd numbers. Because of that cores cannot be merged like [1-128], and are comma separated [1,3,5,7,(..),128]. This kind of output doesn't fit into `nvidia-smi` command. I think that slurm affinity discovery may rely on something similar to `nvidia-smi`, because when I assigned correct cores from NUMA (all 64) discovered with hwloc, I had the same error in slurmctld. I haven't investigated impact of this error, as you mentioned it is possible to use that resources.
Best regards, Patryk.
On 24/05/20 04:17, Gestió Servidors via slurm-users wrote: [-- Type: text/plain; charset=US-ASCII, Encoding: 7bit, Size: 3,7K --]
Hello,
I am trying to rewrite my gres.conf file.
Before changes, this file was just like this: NodeName=node-gpu-1 AutoDetect=off Name=gpu Type=GeForceRTX2070 File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-1 AutoDetect=off Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia1 Cores=12-23 NodeName=node-gpu-2 AutoDetect=off Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-2 AutoDetect=off Name=gpu Type=GeForceGTX1080 File=/dev/nvidia1 Cores=12-23 NodeName=node-gpu-3 AutoDetect=off Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 Cores=0-11 NodeName=node-gpu-4 AutoDetect=off Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 Cores=0-7 # you can seee that nodes node-gpu-1 and node-gpu-2 have two GPUs each one, whereas nodes node-gpu-3 and node-gpu-4 have only one GPU each one
And my slurmd.conf was this: [...] AccountingStorageTRES=gres/gpu GresTypes=gpu NodeName=node-gpu-1 CPUs=24 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceRTX2070:1,gpu:GeForceGTX1080Ti:1 NodeName=node-gpu-2 CPUs=24 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceGTX1080Ti:1,gpu:GeForceGTX1080:1 NodeName=node-gpu-3 CPUs=12 SocketsPerBoard=1 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=23000 Gres=gpu:GeForceRTX3080:1 NodeName=node-gpu-4 CPUs=8 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2 RealMemory=7800 Gres=gpu:GeForceRTX3080:1 NodeName=node-worker-[0-22] CPUs=12 SocketsPerBoard=1 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=47000 [...]
With this configuration, all seems works fine, except slurmctld.log reports: [...] error: _node_config_validate: gres/gpu: invalid GRES core specification (0-11) on node node-gpu-3 error: _node_config_validate: gres/gpu: invalid GRES core specification (12-23) on node node-gpu-1 error: _node_config_validate: gres/gpu: invalid GRES core specification (12-23) on node node-gpu-2 error: _node_config_validate: gres/gpu: invalid GRES core specification (0-7) on node node-gpu-4 [...]
However, even these errors, users can submit jobs and request GPUs resources.
Now, I have tried to reconfigure gres.conf and slurmd.conf in this way: gres.conf: Name=gpu Type=GeForceRTX2070 File=/dev/nvidia0 Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia1 Name=gpu Type=GeForceGTX1080Ti File=/dev/nvidia0 Name=gpu Type=GeForceGTX1080 File=/dev/nvidia1 Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 Name=gpu Type=GeForceRTX3080 File=/dev/nvidia0 # there is no NodeName attribute
slurmd.conf: [...] NodeName=node-gpu-1 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceRTX2070:1,gpu:GeForceGTX1080Ti:1 NodeName=node-gpu-2 SocketsPerBoard=2 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=96000 TmpDisk=47000 Gres=gpu:GeForceGTX1080Ti:1,gpu:GeForceGTX1080:1 NodeName=node-gpu-3 SocketsPerBoard=1 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=23000 Gres=gpu:GeForceRTX3080:1 NodeName=node-gpu-4 SocketsPerBoard=1 CoresPerSocket=4 ThreadsPerCore=2 RealMemory=7800 Gres=gpu:GeForceRTX3080:1 NodeName=node-worker-[0-22] SocketsPerBoard=1 CoresPerSocket=6 ThreadsPerCore=2 RealMemory=47000 # there is no CPUs attribute [...]
With this new configuration, nodes with GPU start correctly slurmd.service daemon, but nodes without GPU (node-worker-[0-22]) can't start slurmd.service daemon and returns this error: [...] error: Waiting for gres.conf file /dev/nvidia0 fatal: can't stat gres.conf file /dev/nvidia0: No such file or directory [...]
It seems SLURM is waiting that "node-workers" have also an nvidia GPU but not, theses nodes haven't GPU... So, where is my configuration error?
I have read in https://slurm.schedmd.com/gres.conf.html about syntax and examples but it seems I'm doing some wrong.
Thanks!!
[-- Alternative Type #1: text/html; charset=US-ASCII, Encoding: 7bit, Size: 11K --]
-- slurm-users mailing list -- slurm-users@lists.schedmd.com To unsubscribe send an email to slurm-users-leave@lists.schedmd.com