<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Hi Hermann,</p>
<p>count doesn't make a difference, but I noticed that when I
reconfigure slurm and do reloads afterwards, the error "gpu count
lower than configured" no longer appears - so maybe it is just
because a reconfigure is needed after reloading slurmctld - or
maybe it doesn't show the error anymore, because the node is still
invalid? However, I still get the error:</p>
<p> error: _slurm_rpc_node_registration node=NName: Invalid
argument<br>
</p>
<p>If I understand correctly, this is telling me that there's
something wrong with my slurm.conf. I know that all pre-existing
parameters are correct, so I assume it must be the gpus entry, but
I don't see where it's wrong:</p>
<blockquote>
<p>NodeName=NName SocketsPerBoard=8 CoresPerSocket=1
RealMemory=8000 Gres=gpu:1 State=CLOUD # bibiserv<br>
</p>
</blockquote>
<p>Thanks for all the help,<br>
Xaver<br>
</p>
<div class="moz-cite-prefix">On 19.07.23 15:04, Hermann Schwärzler
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:fab27a15-fae6-ab90-d934-398516f35f4f@uibk.ac.at">Hi
Xaver,
<br>
<br>
I think you are missing the "Count=..." part in gres.conf
<br>
<br>
It should read
<br>
<br>
NodeName=NName Name=gpu File=/dev/tty0 Count=1
<br>
<br>
in your case.
<br>
<br>
Regards,
<br>
Hermann
<br>
<br>
On 7/19/23 14:19, Xaver Stiensmeier wrote:
<br>
<blockquote type="cite">Okay,
<br>
<br>
thanks to S. Zhang I was able to figure out why nothing changed.
While I did restart systemctld at the beginning of my tests, I
didn't do so later, because I felt like it was unnecessary, but
it is right there in the fourth line of the log that this is
needed. Somehow I misread it and thought it automatically
restarted slurmctld.
<br>
<br>
Given the setup:
<br>
<br>
slurm.conf
<br>
...
<br>
GresTypes=gpu
<br>
NodeName=NName SocketsPerBoard=8 CoresPerSocket=1
RealMemory=8000 GRES=gpu:1 State=UNKNOWN
<br>
...
<br>
<br>
gres.conf
<br>
NodeName=NName Name=gpu File=/dev/tty0
<br>
<br>
When restarting, I get the following error:
<br>
<br>
error: Setting node NName state to INVAL with reason:gres/gpu
count reported lower than configured (0 < 1)
<br>
<br>
So it is still not working, but at least I get a more helpful
log message. Because I know that this /dev/tty trick works, I am
still unsure where the current error lies, but I will try to
investigate it further. I am thankful for any ideas in that
regard.
<br>
<br>
Best regards,
<br>
Xaver
<br>
<br>
On 19.07.23 10:23, Xaver Stiensmeier wrote:
<br>
<blockquote type="cite">
<br>
Alright,
<br>
<br>
I tried a few more things, but I still wasn't able to get
past: srun: error: Unable to allocate resources: Invalid
generic resource (gres) specification.
<br>
<br>
I should mention that the node I am trying to test GPU with,
doesn't really have a gpu, but Rob was so kind to find out
that you do not need a gpu as long as you just link to a file
in /dev/ in the gres.conf. As mentioned: This is just for
testing purposes - in the end we will run this on a node with
a gpu, but it is not available at the moment.
<br>
<br>
*The error isn't changing*
<br>
<br>
If I omitt "GresTypes=gpu" and "Gres=gpu:1", I still get the
same error.
<br>
<br>
*Debug Info*
<br>
<br>
I added the gpu debug flag and logged the following:
<br>
<br>
[2023-07-18T14:59:45.026] restoring original state of nodes
<br>
[2023-07-18T14:59:45.026] select/cons_tres:
part_data_create_array: select/cons_tres: preparing for 2
partitions
<br>
[2023-07-18T14:59:45.026] error: GresPlugins changed from
(null) to gpu ignored
<br>
[2023-07-18T14:59:45.026] error: Restart the slurmctld daemon
to change GresPlugins
<br>
[2023-07-18T14:59:45.026] read_slurm_conf: backup_controller
not specified
<br>
[2023-07-18T14:59:45.026] error: GresPlugins changed from
(null) to gpu ignored
<br>
[2023-07-18T14:59:45.026] error: Restart the slurmctld daemon
to change GresPlugins
<br>
[2023-07-18T14:59:45.026] select/cons_tres:
select_p_reconfigure: select/cons_tres: reconfigure
<br>
[2023-07-18T14:59:45.027] select/cons_tres:
part_data_create_array: select/cons_tres: preparing for 2
partitions
<br>
[2023-07-18T14:59:45.027] No parameter for mcs plugin, default
values set
<br>
[2023-07-18T14:59:45.027] mcs: MCSParameters = (null).
ondemand set.
<br>
[2023-07-18T14:59:45.028] _slurm_rpc_reconfigure_controller:
completed usec=5898
<br>
[2023-07-18T14:59:45.952]
SchedulerParameters=default_queue_depth=100,max_rpc_cnt=0,max_sched_time=2,partition_job_depth=0,sched_max_job_start=0,sched_min_interval=2<br>
<br>
I am a bit unsure what to do next to further investigate this
issue.
<br>
<br>
Best regards,
<br>
Xaver
<br>
<br>
On 17.07.23 15:57, Groner, Rob wrote:
<br>
<blockquote type="cite">That would certainly do it. If you
look at the slurmctld log when it comes up, it will say that
it's marking that node as invalid because it has less (0)
gres resources then you say it should have. That's because
slurmd on that node will come up and say "What gres
resources??"
<br>
<br>
For testing purposes, you can just create a dummy file on
the node, then in gres.conf, point to that file as the
"graphics file" interface. As long as you don't try to
actually use it as a graphics file, that should be enough
for that node to think it has gres/gpu resources. That's
what I do in my vagrant slurm cluster.
<br>
<br>
Rob
<br>
<br>
------------------------------------------------------------------------
<br>
*From:* slurm-users
<a class="moz-txt-link-rfc2396E" href="mailto:slurm-users-bounces@lists.schedmd.com"><slurm-users-bounces@lists.schedmd.com></a> on behalf of
Xaver Stiensmeier <a class="moz-txt-link-rfc2396E" href="mailto:xaverstiensmeier@gmx.de"><xaverstiensmeier@gmx.de></a>
<br>
*Sent:* Monday, July 17, 2023 9:43 AM
<br>
*To:* <a class="moz-txt-link-abbreviated" href="mailto:slurm-users@lists.schedmd.com">slurm-users@lists.schedmd.com</a>
<a class="moz-txt-link-rfc2396E" href="mailto:slurm-users@lists.schedmd.com"><slurm-users@lists.schedmd.com></a>
<br>
*Subject:* Re: [slurm-users] GRES and GPUs
<br>
Hi Hermann,
<br>
<br>
Good idea, but we are already using
`SelectType=select/cons_tres`. After
<br>
setting everything up again (in case I made an unnoticed
mistake), I saw
<br>
that the node got marked STATE=inval.
<br>
<br>
To be honest, I thought I can just claim that a node has a
gpu even if
<br>
it doesn't have one - just for testing purposes. Could this
be the issue?
<br>
<br>
Best regards,
<br>
Xaver Stiensmeier
<br>
<br>
On 17.07.23 14:11, Hermann Schwärzler wrote:
<br>
> Hi Xaver,
<br>
>
<br>
> what kind of SelectType are you using in your
slurm.conf?
<br>
>
<br>
> Per
<a class="moz-txt-link-freetext" href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PqvE6pL2sKSb6KxLngi0sbm6qhIv8MRYTmUM%2Bgq1hrI%3D&reserved=0">https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PqvE6pL2sKSb6KxLngi0sbm6qhIv8MRYTmUM%2Bgq1hrI%3D&reserved=0</a>
<a class="moz-txt-link-rfc2396E" href="https://slurm.schedmd.com/gres.html"><https://slurm.schedmd.com/gres.html></a> you have to
consider:
<br>
> "As for the --gpu* option, these options are only
supported by Slurm's
<br>
> select/cons_tres plugin."
<br>
>
<br>
> So you can use "--gpus ..." only when you state
<br>
> SelectType = select/cons_tres
<br>
> in your slurm.conf.
<br>
>
<br>
> But "--gres=gpu:1" should work always.
<br>
>
<br>
> Regards
<br>
> Hermann
<br>
>
<br>
>
<br>
> On 7/17/23 13:43, Xaver Stiensmeier wrote:
<br>
>> Hey,
<br>
>>
<br>
>> I am currently trying to understand how I can
schedule a job that
<br>
>> needs a GPU.
<br>
>>
<br>
>> I read about GRES
<a class="moz-txt-link-freetext" href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PqvE6pL2sKSb6KxLngi0sbm6qhIv8MRYTmUM%2Bgq1hrI%3D&reserved=0">https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PqvE6pL2sKSb6KxLngi0sbm6qhIv8MRYTmUM%2Bgq1hrI%3D&reserved=0</a>
<a class="moz-txt-link-rfc2396E" href="https://slurm.schedmd.com/gres.html"><https://slurm.schedmd.com/gres.html></a> and tried to
use:
<br>
>>
<br>
>> GresTypes=gpu
<br>
>> NodeName=test Gres=gpu:1
<br>
>>
<br>
>> But calling - after a 'sudo scontrol reconfigure':
<br>
>>
<br>
>> srun --gpus 1 hostname
<br>
>>
<br>
>> didn't work:
<br>
>>
<br>
>> srun: error: Unable to allocate resources: Invalid
generic resource
<br>
>> (gres) specification
<br>
>>
<br>
>> so I read more
<a class="moz-txt-link-freetext" href="https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.conf.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=aCh8X6QtJpRlIWxo%2BQxL85CC%2FbIo6bDxAY%2Fd5B9khmE%3D&reserved=0">https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fslurm.schedmd.com%2Fgres.conf.html&data=05%7C01%7Crug262%40psu.edu%7Cbc4b7775beae4d2e376c08db86cbfc7b%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C638251982928987379%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=aCh8X6QtJpRlIWxo%2BQxL85CC%2FbIo6bDxAY%2Fd5B9khmE%3D&reserved=0</a>
<a class="moz-txt-link-rfc2396E" href="https://slurm.schedmd.com/gres.conf.html"><https://slurm.schedmd.com/gres.conf.html></a> but that
<br>
>> didn't really help me.
<br>
>>
<br>
>>
<br>
>> I am rather confused. GRES claims to be generic
resources but then it
<br>
>> comes with three defined resources (GPU, MPS, MIG)
and using one of
<br>
>> those didn't work in my case.
<br>
>>
<br>
>> Obviously, I am misunderstanding something, but I
am unsure where to
<br>
>> look.
<br>
>>
<br>
>>
<br>
>> Best regards,
<br>
>> Xaver Stiensmeier
<br>
>>
<br>
>
<br>
<br>
</blockquote>
</blockquote>
</blockquote>
<br>
</blockquote>
</body>
</html>