<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">body p { margin-bottom: 0cm; margin-top: 0pt; } </style>
</head>
<body bidimailui-charset-is-forced="true">
<p>Are you sure there are enough resources available? The node is in
mixed state, so it's configured for both partitions - it's
possible that earlier lower priority jobs are already running thus
blocking the later jobs, especially since it's fifo.</p>
<p><br>
</p>
<p>It would really help if you pasted the results of:</p>
<p>squeue</p>
<p>sinfo</p>
<p><br>
</p>
<p>As well as the exact sbatch line, so we can see how many
resources per node are requested.<br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 26/04/2020 12:00:06, navin
srivastava wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAK8-jZBEX5NVuAmBNKw55xX1aFFGMV5RUVWKF--9iO=EJvH8rg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">Thanks Brian,
<div><br>
</div>
<div>As suggested i gone through document and what i understood
that the fair tree leads to the Fairshare mechanism and based
on that the job should be scheduling.</div>
<div><br>
</div>
<div>so it mean job scheduling will be based on FIFO but
priority will be decided on the Fairshare. i am not sure if
both conflicts here.if i see the normal jobs priority is lower
than the GPUsmall priority. so resources are available with
gpusmall partition then it should go. there is no job pend due
to gpu resources. the gpu resources itself not asked with the
job.</div>
<div><br>
</div>
<div>is there any article where i can see how the
fairshare works and which are setting should not be conflict
with this.</div>
<div>According to document it never says that if fair-share is
applied then FIFO should be disabled.<br>
</div>
<div><br>
</div>
<div>Regards</div>
<div>Navin.</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Sat, Apr 25, 2020 at 12:47
AM Brian W. Johanson <<a href="mailto:bjohanso@psc.edu"
moz-do-not-send="true">bjohanso@psc.edu</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div> <br>
If you haven't looked at the man page for slurm.conf, it
will answer most if not all your questions. <br>
<a href="https://slurm.schedmd.com/slurm.conf.html"
target="_blank" moz-do-not-send="true">https://slurm.schedmd.com/slurm.conf.html</a>
but I would depend on the the manual version that was
distributed with the version you have installed as options
do change.<br>
<br>
There is a ton of information that is tedious to get through
but reading through it multiple times opens many doors.<br>
<br>
DefaultTime is listed in there as a Partition option. <br>
If you are scheduling gres/gpu resources, it's quite
possible there are cores available with no corresponding
gpus avail.<br>
<br>
-b<br>
<br>
<div>On 4/24/20 2:49 PM, navin srivastava wrote:<br>
</div>
<blockquote type="cite">
<div dir="auto">Thanks Brian.
<div dir="auto"><br>
</div>
<div dir="auto">I need to check the jobs order. <br>
<div dir="auto"><br>
</div>
<div dir="auto">Is there any way to define the
default timeline of the job if user not specifying
time limit. </div>
<div dir="auto"><br>
</div>
<div dir="auto">Also what does the meaning of
fairtree in priorities in slurm.Conf file. </div>
<div dir="auto"><br>
</div>
<div dir="auto">The set of nodes are different in
partitions.FIFO does not care for any
partitiong. </div>
<div dir="auto">Is it like strict odering means the
job came 1st will go and until it runs it will not
allow others.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Also priorities is high for gpusmall
partition and low for normal jobs and the nodes of
the normal partition is full but gpusmall cores are
available.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Regards <br>
</div>
<div dir="auto">Navin </div>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Fri, Apr 24, 2020,
23:49 Brian W. Johanson <<a
href="mailto:bjohanso@psc.edu" target="_blank"
moz-do-not-send="true">bjohanso@psc.edu</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px
0px 0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">
<div> <tt>Without seeing the jobs in your queue, I
would expect the next job in FIFO order to be too
large to fit in the current idle resources. <br>
<br>
Configure it to use the backfill scheduler: </tt><tt><tt>SchedulerType=sched/backfill<br>
<br>
</tt> SchedulerType<br>
Identifies the type of scheduler to
be used. Note the slurmctld daemon must be
restarted for a change in scheduler type to become
effective (reconfiguring a running daemon has no
effect for this parameter). The scontrol command
can be used to manually change job priorities if
desired. Acceptable values include:<br>
<br>
sched/backfill<br>
For a backfill scheduling
module to augment the default FIFO scheduling.
Backfill scheduling will initiate lower-priority
jobs if doing so does not delay the expected
initiation time of any higher priority job.
Effectiveness of backfill scheduling is
dependent upon users specifying job time limits,
otherwise all jobs will have the same time limit
and backfilling is impossible. Note documentation
for the SchedulerParameters option above. This is
the default configuration.<br>
<br>
sched/builtin<br>
This is the FIFO scheduler
which initiates jobs in priority order. If any
job in the partition can not be scheduled, no
lower priority job in that partition will be
scheduled. An exception is made for jobs that can
not run due to partition constraints (e.g. the
time limit) or down/drained nodes. In that case,
lower priority jobs can be initiated and not
impact the higher priority job.<br>
<br>
<br>
<br>
Your partitions are set with maxtime=INFINITE, if
your users are not specifying a reasonable
timelimit to their jobs, this won't help either.<br>
<br>
<br>
-b<br>
<br>
</tt><br>
<div>On 4/24/20 1:52 PM, navin srivastava wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">In addition to the above when i see
the sprio of both the jobs it says :-
<div><br>
</div>
<div>for normal queue jobs all jobs showing the
same priority</div>
<div><br>
</div>
<div> JOBID PARTITION PRIORITY FAIRSHARE<br>
1291352 normal 15789
15789<br>
</div>
<div><br>
</div>
<div>for GPUsmall all jobs showing the same
priority.</div>
<div><br>
</div>
<div> JOBID PARTITION PRIORITY FAIRSHARE<br>
1291339 GPUsmall 21052 21053<br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Fri, Apr
24, 2020 at 11:14 PM navin srivastava <<a
href="mailto:navin.altair@gmail.com"
rel="noreferrer" target="_blank"
moz-do-not-send="true">navin.altair@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote"
style="margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">
<div dir="ltr">Hi Team,<br>
<div><br>
</div>
<div>we are facing some issue in our
environment. The resources are free but
job is going into the QUEUE state but not
running.</div>
<div><br>
</div>
<div>i have attached the slurm.conf file
here.</div>
<div><br>
</div>
<div>scenario:-</div>
<div><br>
</div>
<div>There are job only in the 2 partitions:</div>
<div> 344 jobs are in PD state in normal
partition and the node belongs from the
normal partitions are full and no more job
can run.</div>
<div><br>
</div>
<div>1300 JOBS are in GPUsmall partition are
in queue and enough CPU is avaiable to
execute the jobs but i see the jobs are
not scheduling on free nodes.</div>
<div><br>
</div>
<div>Rest there are no pend jobs in any
other partition .</div>
<div>eg:-</div>
<div>node status:- node18</div>
<div><br>
</div>
<div>NodeName=node18 Arch=x86_64
CoresPerSocket=18<br>
CPUAlloc=6 CPUErr=0 CPUTot=36
CPULoad=4.07<br>
AvailableFeatures=K2200<br>
ActiveFeatures=K2200<br>
Gres=gpu:2<br>
NodeAddr=node18 NodeHostName=node18
Version=17.11<br>
OS=Linux 4.4.140-94.42-default #1 SMP
Tue Jul 17 07:44:50 UTC 2018 (0b375e4)<br>
RealMemory=1 AllocMem=0 FreeMem=79532
Sockets=2 Boards=1<br>
State=MIXED ThreadsPerCore=1 TmpDisk=0
Weight=1 Owner=N/A MCS_label=N/A<br>
Partitions=GPUsmall,pm_shared<br>
BootTime=2019-12-10T14:16:37
SlurmdStartTime=2019-12-10T14:24:08<br>
CfgTRES=cpu=36,mem=1M,billing=36<br>
AllocTRES=cpu=6<br>
CapWatts=n/a<br>
CurrentWatts=0 LowestJoules=0
ConsumedJoules=0<br>
ExtSensorsJoules=n/s ExtSensorsWatts=0
ExtSensorsTemp=n/s<br>
</div>
<div><br>
</div>
<div>node19:-</div>
<div><br>
</div>
<div>NodeName=node19 Arch=x86_64
CoresPerSocket=18<br>
CPUAlloc=16 CPUErr=0 CPUTot=36
CPULoad=15.43<br>
AvailableFeatures=K2200<br>
ActiveFeatures=K2200<br>
Gres=gpu:2<br>
NodeAddr=node19 NodeHostName=node19
Version=17.11<br>
OS=Linux 4.12.14-94.41-default #1 SMP
Wed Oct 31 12:25:04 UTC 2018 (3090901)<br>
RealMemory=1 AllocMem=0 FreeMem=63998
Sockets=2 Boards=1<br>
State=MIXED ThreadsPerCore=1 TmpDisk=0
Weight=1 Owner=N/A MCS_label=N/A<br>
Partitions=GPUsmall,pm_shared<br>
BootTime=2020-03-12T06:51:54
SlurmdStartTime=2020-03-12T06:53:14<br>
CfgTRES=cpu=36,mem=1M,billing=36<br>
AllocTRES=cpu=16<br>
CapWatts=n/a<br>
CurrentWatts=0 LowestJoules=0
ConsumedJoules=0<br>
ExtSensorsJoules=n/s ExtSensorsWatts=0
ExtSensorsTemp=n/s<br>
</div>
<div><br>
</div>
<div>could you please help me to understand
what could be the reason?</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
</div>
</blockquote>
</div>
</blockquote>
<br>
</div>
</blockquote>
</div>
</blockquote>
<br>
</div>
</blockquote>
</div>
</blockquote>
<pre class="moz-signature" cols="72">--
Regards,
Daniel Letai
+972 (0)505 870 456</pre>
</body>
</html>